Provided by: hylafax-server_4.2.5-1_i386 bug

NAME

       faxq - HylaFAX queue manager process

SYNOPSIS

       /usr/sbin/faxq [ -D ] [ -q queue-dir ]

DESCRIPTION

       faxq  is  the  central  queueing agent for HylaFAX.  One (and only one)
       faxq process is normally running at all times.  faxq is responsible for
       scheduling,  preparing,  and  initiating  outbound  facsimile jobs (and
       potentially other types of jobs as well).

       faxq may be run by itself to provide outbound-only services or  it  may
       be  run  together with one or more faxgetty(8) processes, in which case
       inbound services (e.g. receiving facsimile) are provided.  When faxq is
       run  by  itself the set of available modems must be specified using the
       faxmodem(8) command.  Each modem specified in this way  is  assumed  to
       exist  and to be capable of use as a facsimile modem.  When faxq is run
       in conjunction with faxgetty processes, it  is  not  necessary  to  use
       faxmodem   to   specify   modems;   instead  the  programs  communicate
       information about the status  and  capabilities  of  each  modem.   The
       latter  setup  provides  a  more  robust and powerful system and is the
       intended way for the software to operate.

       faxq receives  notification  of  outbound  jobs  to  process  from  the
       hfaxd(8) process that implements the server-side of the HylaFAX client-
       server protocol.  Notification is  through  messages  sent  to  a  FIFO
       special  file  that  faxq  listens to.  This file is also used by other
       administrative programs such as faxquit(8).

       Many  aspects  of  faxq  operation  may   be   controlled   through   a
       configuration  file.   This file is located in the spooler hierarchy in
       the etc subdirectory and is named config (as opposed to  the  per-modem
       configuration  files named config.devid); consult hylafax-config(5) for
       detailed information  on  this  configuration  file.   Note  that  faxq
       automatically  re-reads  its configuration file if it has been changed.
       It is also possible to dynamically change configuration parameters in a
       running  process  with  the  faxconfig(8) program.  Beware however that
       parameters changed in this way will be reset to the values specified in
       the configuration file if the file is re-read.

OPTIONS

       -q dir    The specified directory is treated as the spooling area.  The
                 default spooling area, /var/spool/hylafax, is defined at  the
                 time the software is built.

       -D        This option forces faxq to remain attached to the controlling
                 tty from which it was invoked.  In normal operation faxq will
                 fork(2)  and  dissassociate  itself from the controlling tty.
                 This option is useful for debugging.

FILES

       /var/spool/hylafax/FIFO          FIFO special file for submitting commands
       /var/spool/hylafax/etc/config    configuration file

       Consult hylafax-server(5) for a complete discussion  of  the  structure
       and content of the spooling area.

SEE ALSO

       faxabort(8),   faxconfig(8),   faxmodem(8),   faxquit(8),  faxstate(8),
       getty(8), hylafax-server(5), hylafax-config(5).

                               October 27, 1995                        FAXQ(8)