Provided by: fence_1.20060222-0ubuntu5_i386 bug

NAME

       fence_drac - fencing agent for Dell Remote Access Card

SYNOPSIS

       fence_drac [OPTION]...

DESCRIPTION

       fence_drac  is  an  I/O  Fencing  agent which can be used with the Dell
       Remote Access  Card  (DRAC).   This  card  provides  remote  access  to
       controling power to a server.  It logs into the DRAC through the telnet
       interface of the  card.   By  default,  the  telnet  interface  is  not
       enabled.   To  enable  the  interface,  you will need to use the racadm
       command in the racser-devel rpm available from Dell.  To enable  telnet
       on the DRAC:

       [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1

       [root]# racadm racreset

       fence_drac  accepts  options on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_drac  can  be  run  by itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

OPTIONS

       -a IPaddress
              IP address or hostname of the switch.

       -c cmd_prompt
              Force fence_drac to use cmd_prompt as the command prompt

       -d dracversion
              Force fence_drac to treat the device as though it  was  for  the
              specified drac version

       -D dumpfile
              Debug file of the telnet interaction

       -h     Print  out  a  help  message  describing available options, then
              exit.

       -l login
              Login name.

       -m modulename
              The module name of the blade when using DRAC/MC firmware.

       -o action
              The action required.  reboot (default), off, on or status.

       -p password
              Password for login.

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       action = < param >
              The action required.  reboot (default), off, on or status.

       agent = < param >
              This  option  is  used  by  fence_node(8)  and  is  ignored   by
              fence_apc.

       cmd_prompt = < param >
              Force fence_drac to use cmd_prompt as the command prompt

       drac_version = < param >
              Force  fence_drac  to  treat the device as though it was for the
              specified drac version.

       debug = < dumpfile >
              Debug file of the telnet interaction

       ipaddr = < hostname | ip >
              IP address or hostname of the switch.

       login = < param >
              Login name.

       modulename = < param >
              The module name of the blade when using DRAC/MC firmware.

       passwd = < param >
              Password for login.

       SEE ALSO
              fence(8), fence_node(8)

                                                                 fence_drac(8)