Provided by: nictools-nopci_1.3.3-1_i386 bug

NAME

       hp+-diag - Diagnostic program for HP 100VG vetwork adaptors

SYNOPSIS

       hp+-diag [options]

DESCRIPTION

       hp100vg-diag  is a diagnostic program for the HP 100VG Ethernet adapter
       using the Lucent ATT2MD01 chips. You can use this program  to  diagnose
       problems with your enternet adapters.

OPTIONS

       These  programs  follow  the  usual  GNU command line syntax, with long
       options starting with two  dashes  (‘-’).   A  summary  of  options  is
       included below.

       -h, --help
              Show summary of options.

       -V, --version
              Show version of program.

       -v, --verbose
              Verbose mode.

       -D, --debug
              Debug mode.

       -a, --show_all_registers
              Print all registers.

       -e, --show-eeprom
              Dump EEPROM contents,

       -m, --show_mii
              Print the MII transceiver state Using -mm monitors the link.

       -f, --force
              Perform operation, even on a running NIC.

       -p, --port-base <port>
              Specify  port  to  use.  Valid  values are: 0x240, 0x280, 0x300,
              0x320, 0x340, 0x360

       -#, --card_num <number>
              Operate on the specified card index.

       -t, --chip-type <type> Specify adapter type  with-p,  use-1to
       list.

       -G, --parameters <parms>
              Write  adapter-specific  parameters  in  the  persistent  EEPROM
              settings.

       -H, --new-hwaddr 01:23:45:67:ab:cd
              Set a new hardware station address.  Typically diabled.

       -B     Show the first few bytes of the ROM

       -L <file>
              Load the Flash from FILE.

       -S <file>
              Store the Flash image to FILE.

       -w, --write-EEPROM <values>
              Write to the EEPROMS with the specified values.

SEE ALSO

       mii-diag(8)

AUTHOR

       This manual page was written by Alain Schroeder <alain@debian.org>, for
       the Debian GNU/Linux system (but may be used by others).

                               October 22, 2003                HP100VG-DIAG(8)