Provided by: lm-sensors_2.9.2-5ubuntu3_i386 bug

NAME

       isaset - set ISA registers

SYNOPSIS

       isaset [-y] addrreg datareg address value [mask] #for I2C-like access
       isaset [-y] -f address value [mask] #for flat address space

DESCRIPTION

       isaset  is  a small helper program to set registers visible through the
       ISA bus.

OPTIONS

       -f     Enable flat address space mode.

       -y     Disable interactive mode. By default, isaset  will  wait  for  a
              confirmation from the user before messing with the ISA bus. When
              this flag is used, it will perform the operation directly.  This
              is mainly meant to be used in scripts.

OPTIONS (I2C-like access mode)

       Four  options  must  be  provided  to  isaset. addrreg contains the ISA
       address of the address register for the chip to probe; datareg contains
       the  address  of the data register. Both addresses are integers between
       0x0000 and 0x3FFF. Usually, if the chip’s base address is  0x0nn0,  the
       address  register  is at 0x0nn5 and the data register is at 0x0nn6. The
       most common base address for hardware monitoring chips is 0x0290.   For
       Super-I/O  chips,  address  register  is  typically  at  0x2E with data
       register at 0x2F.  The address and value parameters  are  two  integers
       between  0x00  and  0xFF.  isaset  will  write  value  value to address
       address.  An optional mask  can  be  provided  as  a  fifth  parameter,
       preserving unmasked bits at the written location.

OPTIONS (flat address space mode)

       In flat mode, two parameters must be provided. address contains the ISA
       address of the register to write to; it is an  integer  between  0x0000
       and 0xFFFF. Basically, it is the sum of the chip’s base address and the
       chip register’s address. isaset will write value value at this address.
       An  optional  mask  can  be  provided  as a third parameter, preserving
       unmasked bits at the written location.

WARNING

       Poking around in ISA data space is extremely dangerous.  Running isaset
       with  random parameters can cause system crashes, data loss, and worse!
       Be extremely careful when using this program.

CONFORMING TO

       lm_sensors-2.x

SEE ALSO

       i2cset(8), isadump(8)

AUTHOR

       Mark  D.  Studebaker,  and   the   lm_sensors   group   (http://www.lm-
       sensors.nu/)

       This  manual  page  was  shamelessly ripped from the i2cset and isadump
       manual pages by Jean Delvare.

                                   May 2005                          ISASET(8)