Provided by: nut_2.0.3-4build1_i386
oneac - Driver for Oneac UPS equipment
This man page only documents the hardware‐specific features of the
oneac driver. For information about the core driver, see nutupsdrv(8).
This driver supports Oneac EG and ON UPS equipment with the Advanced
Interface. If your UPS is equipped with the Basic Interface card, use
the genericups driver.
This driver supports the following optional settings in the
Change battery test time from the 2 minute default.
This driver supports the following Instant Commands.
Reset the minimum and maximum input line voltage values seen
since the last reset or power on.
Start a battery test. The default time is 2 minutes. This time
can be set in the ups.conf file. See testime above.
Stops a battery test that is in progress.
Starts a 15 second long simulation of an input power failure.
Eric Lawson <firstname.lastname@example.org>
The core driver:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Tue Oct 22 2002 ONEAC(8)