Provided by: pcmciautils_012-1ubuntu4_i386
pccardctl - PCMCIA card control utility
pccardctl [-V] command [socket]
pccardctl is used to monitor and control the state of PCMCIA sockets.
If a socket number is specified, the command will be applied to just
one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is
executed by an unpriviledged user, only the informational commands are
Display the current socket status flags. --not yet implemented
Display the socket configuration, including power settings,
interrupt and I/O window settings, and configuration registers.
--not yet implemented
Display card identification information, including product
identification strings, manufacturer ID codes, and function ID
codes. Not yet implemented for cardbus cards. Use lspci instead.
Much like the ident command, but its output is formatted as a
series of Bourne-stype shell variable definitions for use in
scripts. Not yet implemented for cardbus cards.
Shut down and then disable power for a socket.
Restore power to a socket, and re-configure for use.
Notify all client drivers that this card will be ejected,
then cut power to the socket.
Notify all client drivers that this card has just been
-V Show version information and exit.
Daniel Ritz - email@example.com
based upon the original cardctl man page by
David Hinds - firstname.lastname@example.org