Provided by: hamlib-utils_1.2.4-3_i386 bug

NAME

       rigd - Hamlib rig service daemon

SYNOPSIS

       rpc.rigd [OPTION]...

DESCRIPTION

       The  rigd  program  is  a  Hamlib  rig  daemon  that handles RPC client
       requests.

       Keep in mind that Hamlib is still ALPHA level software.  A lof of stuff
       hasn’t   been  tested  thoroughly,  and  the  API  may  change  without
       publicised notice. Please  report  bugs  and  feedback  at  the  e-mail
       address given in the REPORTING BUGS section.

OPTIONS

       This  program  follow  the  usual  GNU  command  line syntax, with long
       options starting with two  dashes  (‘-’).   A  summary  of  options  is
       included below.

       -m, --model=id
              Select radio model number. See model list.

       -r, --rig-file=device
              Use device as the file name of the radio to operate on.

       -p, --ptt-file=device
              Use  device  as  the  file  name  of  the Push-To-Talk device to
              operate on.

       -d, --dcd-file=device
              Use device as the file name of the Data Carrier Detect device to
              operate on.

       -p, --ptt-type=type
              Use  type  device  as  the  kind  of  the Push-To-Talk device to
              operate on.  Supported types are RIG, DTR, RTS, PARALLEL,  NONE.

       -d, --dcd-type=type
              Use type device as the kind of the Data Carrier Detect device to
              operate on.  Supported types are RIG, DSR,  CTS,  CD,  PARALLEL,
              NONE.

       -s, --serial-speed=baud
              Set  serial  speed  to  baud  rate.  Uses  maximal  rig speed as
              default.

       -c, --civaddr=id
              Use id as the CI-V address to communicate with the rig. Only for
              Icom rigs.

       -C, --set-conf=parm=val[,parm=val]*
              Set config parameter.

       -t, --prog=number
              Use  number as the RPC program number. The default is 536871065.

       -v, --verbose
              Set verbose mode, cumulative (BUG, ERR, WARN, VERBOSE, TRACE).

       -h, --help
              Show summary of options and exit.

       -V, --version
              Show version of program and exit.

       Please note that the backend for the radio to  be  controlled,  or  the
       radio itself may not support some commands. In that case, the operation
       will fail with a standard error code.

AUTHOR

       Written by Stephane Fillod.

BUGS

       No authentication whatsoever. Could be done through domain  restriction
       though.  Please ask if stronger security needed.

       Does  not  support  more  than  one rig that share the same serial port
       (e.g. Icom’s on a CI-V bus).

REPORTING BUGS

       Report bugs to <hamlib-developer@users.sourceforge.net>.
       I’m already aware of the bug in the previous section :-)

COPYRIGHT

       Copyright © 2000-2002 Stephane Fillod.
       This is free software; see the source for copying conditions.  There is
       NO  warranty;  not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
       PURPOSE.

SEE ALSO

       rigctl(1)