Provided by: lzop_1.03-4_amd64
lzop - compress or expand files
lzop is a file compressor very similar to gzip. lzop favors speed over compression ratio.
lzop [ command ] [ options ] [ filename ... ] lzop [-dxlthIVL19] [-qvcfFnNPkU] [-o file] [-p[path]] [-S suffix] [filename ...]
lzop reduces the size of the named files. Whenever possible, each file is compressed into one with the extension .lzo, while keeping the same ownership modes, access and modification times. If no files are specified, or if a file name is "-", lzop tries to compress the standard input to the standard output. lzop will only attempt to compress regular files or symbolic links to regular files. In particular, it will ignore directories. If the compressed file name is too long for its file system, lzop truncates it. Compressed files can be restored to their original form using lzop -d. lzop -d takes a list of files on its command line and decompresses each file whose name ends with .lzo and which begins with the correct magic number to an uncompressed file without the original extension. lzop -d also recognizes the special extension .tzo as shorthand for .tar.lzo. When compressing, lzop uses the .tzo extension if necessary instead of truncating a file with a .tar extension. lzop stores the original file name, mode and time stamp in the compressed file. These can be used when decompressing the file with the -d option. This is useful when the compressed file name was truncated or when the time stamp was not preserved after a file transfer. lzop preserves the ownership, mode and time stamp of files when compressing. When decompressing lzop restores the mode and time stamp if present in the compressed files. See the options -n, -N, --no-mode and --no-time for more information. lzop always keeps original files unchanged unless you use the option -U. lzop uses the LZO data compression library for compression services. The amount of compression obtained depends on the size of the input and the distribution of common substrings. Typically, text such as source code or English is compressed into 40-50% of the original size, and large files usually compress much better than small ones. Compression and decompression speed is generally much faster than that achieved by gzip, but compression ratio is worse. COMPRESSION LEVELS lzop offers the following compression levels of the LZO1X algorithm: -3 the default level offers pretty fast compression. -2, -3, -4, -5 and -6 are currently all equivalent - this may change in a future release. -1, --fast can be even a little bit faster in some cases - but most times you won't notice the difference -7, -8, -9, --best these compression levels are mainly intended for generating pre-compressed data - especially -9 can be somewhat slow Decompression is very fast for all compression levels, and decompression speed is not affected by the compression level.
If no other command is given then lzop defaults to compression (using compression level -3). -#, --fast, --best Regulate the speed of compression using the specified digit #, where -1 or --fast indicates the fastest compression method (less compression) and -9 or --best indicates the slowest compression method (best compression). The default compression level is -3. -d, --decompress, --uncompress Decompress. Each file will be placed into same the directory as the compressed file. -x, --extract Extract compressed files to the current working directory. This is the same as '-dPp'. -t, --test Test. Check the compressed file integrity. -l, --list For each compressed file, list the following fields: method: compression method compressed: size of the compressed file uncompr.: size of the uncompressed file ratio: compression ratio uncompressed_name: name of the uncompressed file In combination with the --verbose option, the following fields are also displayed: date & time: time stamp for the uncompressed file With --name, the uncompressed name, date and time are those stored within the compress file if present. With --verbose, the size totals and compression ratio for all files is also displayed. With --quiet, the title and totals lines are not displayed. Note that lzop defines compression ratio as compressed_size / uncompressed_size. --ls, --ls=FLAGS List each compressed file in a format similar to ls -ln. The following flags are currently honoured: F Append a '*' for executable files. G Inhibit display of group information. Q Enclose file names in double quotes. --info For each compressed file, list the internal header fields. -I, --sysinfo Display information about the system and quit. -L, --license Display the lzop license and quit. -h, -H, --help Display a help screen and quit. -V Version. Display the version number and compilation options and quit. --version Version. Display the version number and quit.
-c, --stdout, --to-stdout Write output on standard output. If there are several input files, the output consists of a sequence of independently (de)compressed members. To obtain better compression, concatenate all input files before compressing them. -o FILE, --output=FILE Write output to the file FILE. If there are several input files, the output consists of a sequence of independently (de)compressed members. -p, -pDIR, --path=DIR Write output files into the directory DIR instead of the directory determined by the input file. If DIR is omitted, then write to the current working directory. -f, --force Force lzop to - overwrite existing files - (de-)compress from stdin even if it seems a terminal - (de-)compress to stdout even if it seems a terminal - allow option -c in combination with -U Using -f two or more times forces things like - compress files that already have a .lzo suffix - try to decompress files that do not have a valid suffix - try to handle compressed files with unknown header flags Use with care. -F, --no-checksum Do not store or verify a checksum of the uncompressed file when compressing or decompressing. This speeds up the operation of lzop a little bit (especially when decompressing), but as unnoticed data corruption can happen in case of damaged compressed files the usage of this option is not generally recommended. Also, a checksum is always stored when compressing with one of the slow compression levels (-7, -8 or -9), regardless of this option. -n, --no-name When decompressing, do not restore the original file name if present (remove only the lzop suffix from the compressed file name). This option is the default under UNIX. -N, --name When decompressing, restore the original file name if present. This option is useful on systems which have a limit on file name length. If the original name saved in the compressed file is not suitable for its file system, a new name is constructed from the original one to make it legal. This option is the default under DOS, Windows and OS/2. -P When decompressing, restore the original path and file name if present. When compressing, store the relative (and cleaned) path name. This option is mainly useful when using archive mode - see usage examples below. --no-mode When decompressing, do not restore the original mode (permissions) saved in the compressed file. --no-time When decompressing, do not restore the original time stamp saved in the compressed file. -S .suf, --suffix=.suf Use suffix .suf instead of .lzo. The suffix must not contain multiple dots and special characters like '+' or '*', and suffixes other than .lzo should be avoided to avoid confusion when files are transferred to other systems. -k, --keep Do not delete input files. This is the default. -U, --unlink, --delete Delete input files after succesfull compression or decompression. Use this option to make lzop behave like gzip and bzip2. Note that explicitly giving -k overrides -U. --crc32 Use a crc32 checksum instead of a adler32 checksum. --no-warn Suppress all warnings. --ignore-warn Suppress all warnings, and never exit with exit status 2. -q, --quiet, --silent Suppress all warnings and decrease the verbosity of some commands like --list or --test. -v, --verbose Verbose. Display the name for each file compressed or decompressed. Multiple -v can be used to increase the verbosity of some commands like --list or --test. -- Specifies that this is the end of the options. Any file name after -- will not be interpreted as an option even if it starts with a hyphen.
--no-stdin Do not try to read standard input (but a file name "-" will still override this option). In old versions of lzop, this option was necessary when used in cron jobs (which do not have a controlling terminal). --filter=NUMBER Rarely useful. Preprocess data with a special "multimedia" filter before compressing in order to improve compression ratio. NUMBER must be a decimal number from 1 to 16, inclusive. Using a filter slows down both compression and decompression quite a bit, and the compression ratio usually doesn't improve much either... More effective filters may be added in the future, though. You can try --filter=1 with data like 8-bit sound samples, --filter=2 with 16-bit samples or depth-16 images, etc. Un-filtering during decompression is handled automatically. -C, --checksum Deprecated. Only for compatibility with very old versions as lzop now uses a checksum by default. This option will get removed in a future release. --no-color Do not use any color escape sequences. --mono Assume a mono ANSI terminal. This is the default under UNIX (if console support is compiled in). --color Assume a color ANSI terminal or try full-screen access. This is the default under DOS and in a Linux virtual console (if console support is compiled in).
lzop allows you to deal with your files in many flexible ways. Here are some usage examples: backup mode tar --use-compress-program=lzop -cf archive.tar.lzo files.. This is the recommended mode for creating backups. Requires GNU tar or a compatible version which accepts the '--use-compress-program=XXX' option. single file mode: individually (de)compress each file create lzop a.c -> create a.c.lzo lzop a.c b.c -> create a.c.lzo & b.c.lzo lzop -U a.c b.c -> create a.c.lzo & b.c.lzo and delete a.c & b.c lzop *.c extract lzop -d a.c.lzo -> restore a.c lzop -df a.c.lzo -> restore a.c, overwrite if already exists lzop -d *.lzo list lzop -l a.c.lzo lzop -l *.lzo lzop -lv *.lzo -> be verbose test lzop -t a.c.lzo lzop -tq *.lzo -> be quiet pipe mode: (de)compress from stdin to stdout create lzop < a.c > y.lzo cat a.c | lzop > y.lzo tar -cf - *.c | lzop > y.tar.lzo -> create a compressed tar file extract lzop -d < y.lzo > a.c lzop -d < y.tar.lzo | tar -xvf - -> extract a tar file list lzop -l < y.lzo cat y.lzo | lzop -l lzop -d < y.tar.lzo | tar -tvf - -> list a tar file test lzop -t < y.lzo cat y.lzo | lzop -t stdout mode: (de)compress to stdout create lzop -c a.c > y.lzo extract lzop -dc y.lzo > a.c lzop -dc y.tar.lzo | tar -xvf - -> extract a tar file list lzop -dc y.tar.lzo | tar -tvf - -> list a tar file archive mode: compress/extract multiple files into a single archive file create lzop a.c b.c -o sources.lzo -> create an archive lzop -P src/*.c -o sources.lzo -> create an archive, store path name lzop -c *.c > sources.lzo -> another way to create an archive lzop -c *.h >> sources.lzo -> add files to archive extract lzop -dN sources.lzo lzop -x ../src/sources.lzo -> extract to current directory lzop -x -p/tmp < ../src/sources.lzo -> extract to /tmp directory list lzop -lNv sources.lzo test lzop -t sources.lzo lzop -tvv sources.lzo -> be very verbose If you wish to create a single archive file with multiple members so that members can later be extracted independently, you should prefer a full-featured archiver such as tar. The latest version of GNU tar supports the --use-compress-program=lzop option to invoke lzop transparently. lzop is designed as a complement to tar, not as a replacement.
The environment variable LZOP can hold a set of default options for lzop. These options are interpreted first and can be overwritten by explicit command line parameters. For example: for sh/ksh/zsh: LZOP="-1v --name"; export LZOP for csh/tcsh: setenv LZOP "-1v --name" for DOS/Windows: set LZOP=-1v --name On Vax/VMS, the name of the environment variable is LZOP_OPT, to avoid a conflict with the symbol set for invocation of the program. Not all of the options are valid in the environment variable - lzop will tell you.
bzip2(1), gzip(1), tar(1) Precompiled binaries for some platforms are available from the lzop home page. see http://www.oberhumer.com/opensource/lzop/ lzop uses the LZO data compression library for compression services. see http://www.oberhumer.com/opensource/lzo/
Exit status is normally 0; if an error occurs, exit status is 1. If a warning occurs, exit status is 2 (unless option --ignore-warn is in effect). lzop's diagnostics are intended to be self-explanatory.
No bugs are known. Please report all problems immediately to the author.
Markus Franz Xaver Johannes Oberhumer <email@example.com> http://www.oberhumer.com/opensource/lzop/
lzop and the LZO library are Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 by Markus Franz Xaver Johannes Oberhumer. All Rights Reserved. lzop and the LZO library are distributed under the terms of the GNU General Public License (GPL). Legal info: If want to integrate lzop into your commercial (backup-)system please carefully read the GNU GPL FAQ at http://www.gnu.org/licenses/gpl-faq.html about possible implications.