Provided by: spass_3.7-4_amd64

**NAME**

SPASS - automated theorem prover for full first-order logic with equality

**SYNOPSIS**

SPASS [options] [inputfile]

**DESCRIPTION**

SPASS is an automated theorem prover for full sorted first-order logic with equality that extends superposition by sorts and a splitting rule for case analysis. SPASS can also be used as a modal logic and description logic theorem prover.

**OPTIONS**

Command line options in SPASS are implemented via modifications to the GNU command line option package for C. Just giving the option sets its value to 1 and means enabling the option. In order to disable an option the value has to be set to 0 by declaring -Option=0. The following options are currently supported by SPASS: -Auto Enables/disables the auto mode where SPASS configures itself automatically. The inference/reduction rules, the sort technology, the ordering and precedence as well as the splitting and selection strategy are set. In auto mode SPASS is complete. Mixing the auto mode with user defined options may destroy completeness. Default is 1. -Stdin Enables/disables input in SPASS via stdin. The file argument is ignored. Default is 0. -Interactive Enables/disables the interactive mode. First, SPASS is given a set of axioms and then the prover accepts subsequent proof tasks. Default is 0. -Flotter Enables/disables the CNF translation mode of SPASS. If the option is set, SPASS only performs a clause normal form translation. If no output file argument is given SPASS prints the CNF to stdout. Default is 0. -SOS Enables/disables the set of support strategy. Default is 0. -Splits=nSets the number of possible splitting applications ton. Ifn=-1 then the number of splits is not limited. Default is 0. -Memory=nSets the amount of memory available to SPASS for the proof search tonbytes. The memory needed to startup SPASS cannot be restricted. Default is -1 meaning that memory allocations is only restricted by available memory. -TimeLimit=nSets a time limit for the proof search tonseconds. Default is -1 meaning that SPASS may run forever. The time limit is polled when SPASS selects a new clause for inferences. If a single inference step causes an explosion to the number of generated clauses it may therefore happen that a given time limit is significantly exceeded. -DocSST Enables/disables documentation output for static soft typing. The used sort theory as well as the (failed) proof attempt for the sort constraint is printed. Default is 0. -DocProof Enables/disables proof documentation. If SPASS finds a proof it is eventually printed. If SPASS finds a saturation, the saturated set of clauses is eventually printed. Enabling proof documentation may significantly decrease SPASS's performance, because the prover must store clauses that can be thrown away otherwise. Default is 0. -DocSplit Sets the documentation of split backtracking steps. If set to 1, the current backtracking level is printed. If set to 2, it also prints in case of a split backtrack the backtracked clauese. Default is 0. -Loops Sets the maximal number of mainloop iterations for SPASS. Default is -1. -PSub Enables/disables printing of subsumed clauses. Default is 0. -PRew Enables/disables printing of simple rewrite applications. Default is 0. -PCon Enables/disables printing of condensation applications. Default is 0. -PTaut Enables/disables printing of tautology deletion applications. Default is 0. -PObv Enables/disables printing of obvious reduction applications. Default is 0. -PSSi Enables/disables printing of sort simplification applications. Default is 0. -PSST Enables/disables printing of static soft typing applications. All deleted clauses are printed. Default is 0. -PMRR Enables/disables printing of matching replacement resolution applications. Default is 0. -PUnC Enables/disables printing of unit conflict applications. Default is 0. -PAED Enables/disables printing of clauses where redundant equations have been removed (assignment equation deletion). -PDer Enables/disables printing of clauses derived by inferences. Default is 0. -PGiven Enables/disables printing of the given clause, selected to perform inferences. Default is 0. -PLabels Enables/disables printing of labels. If the -DocProof is set and no labels for formulae are provided by the input, SPASS generates generic labels that are then printed by enabling this option. Default is 0. -PKept Enables/disables printing of kept clauses. These are clauses generated by inferences (backtracking) that are not redundant. Clauses derived during input reduction/saturation are not printed. Default is 0. -PProblem Enables/disables printing of the input clause set. Default is 1. -PEmptyClause Enables/disables printing of derived empty clauses. Default is 0. -PStatistic Enables/disables printing of a final statistics on derived/backtracked/kept clauses, performed splits, used time and used space. Default is 1. -FPModel Enables/disables the output of an eventually found model to a file. If set to 1, all clauses in the final set are printed. If set to 2, only potentially productive clauses are printed, that are clauses with no selected negative literal and a maximal positive one. If <problemfile> is the name of the input problem and the eventually generated set is saturated, the saturation is printed to the file <problemfile>.model, for otherwise to <problemfile>.clauses. The latter case may, e.g., be caused by a time limit. Default is 0. -FPDFGProof Enables/disables the output of an eventually found proof to a file. Using this option requires to set the option -DocProof. If <problemfile> is the name of the input problem the proof is printed to <problemfile>.prf. Default is 0. -PFlags Enables/disables the output of all flag values. The flag settings are printed at the end of a SPASS run in form of a DFG-Syntax input section. Default is 0. -POptSkolem Enables/disables the output of optimized Skolemization applications. Default is 0. -PStrSkolem Enables/disables the output of strong Skolemization applications. Default is 0. -PBDC Enables/disables the output of clauses deleted because of bound restrictions. Default is 0. -PBInc Enables/disables the output of bound restriction changes. Default is 0. -PApplyDefs Enables/disables printing of expansions of atom definitions. Default is 0. -Select Sets the selection strategy for SPASS. If set to 0 no selection of negative literals is done. If set to any other value, at most one negative literal in a clause is selected. If set to 1 negative literals in clauses with more than one maximal literal are selected. Either a negative literal with a predicate from the selection list (see below) is chosen or if no such negative literal is available, a negative literal with maximal weight is chosen. If set to 2 negative literals are always selected. Again, either a negative literal with a predicate from the selection list (see below) is chosen or if no such negative literal is available, a negative literal with maximal weight is chosen. The latter case results in an ordered hyperresolution like behavior of ordered resolution. If set to 3 any negative literal with a predicate specified by the selection list (see below) is selected. Default is 1. -RInput Enables/disables the reduction of the initial clause set. Default is 1. -Sorts Determines the monadic literals that built the sort constraint for the initial clause set. If set to 0, no sort constraint is built. If set to 1, all negative monadic literals with a variable as argument form the sort constraint. If set to 2, all negative monadic literals form the sort constraint. Setting -Sorts to 2 may harm completeness, since sort constraints are subject to the basic strategy and to static soft typing. Default is 1. -SatInput Enables/disables input saturation. The saturation is incomplete but is guaranteed to terminate. Default is 0. -WDRatio Sets the ratio between given clauses selected by weight or the depth in the search space. The weight is the sum of all symbol weights determined by the -FuncWeight and -VarWeight options. The depth of all initial clauses is 0 and clauses generated by inferences get the maximal depth of a parent clause plus 1. Default is 5, meaning that 4 clauses are selected by weight and the fifth clause is selected by depth. -PrefCon Sets the ratio to compute the weight for conjecture clauses and therefore allows to prefer those. Default is 0 meaning that the weight computation for conjecture clauses is not changed. -FullRed Enables/disables full reduction. If set to 0, only the set of worked off clauses is completely inter-reduced. If set to 1, all currently hold clauses (worked off and usable) are completely inter-reduced. Default is 1. -FuncWeight Sets the weight of function/predicate symbols. The weight of clauses is the sum of all symbol weights. This weight is considered for the selection of the given clause. Default is 1. -VarWeight Sets the weight of variable symbols (see -FuncWeight). Default is 1. -PrefVar Enables/disables the preference for clauses with many variables. While clauses are selected by weight, if this option is set and two clauses have the same weight, the clause with more variable occurrences is preferred. Default is 0. -BoundMode Selects the mode for bound restrictions. Mode 0 means no restriction, if set to 1 all newly generated clauses are restricted by weight (see -BoundStart) and if set to 2 clauses are restricted by depth. Default is 0. -BoundStart The start restriction of the selected bound mode. For example, if bound mode is 1 and bound start set to 5, all clauses with a weight larger than 5 are deleted until the set is saturated. This causes an increase of the used bound value that is determined by the minimal increase saving a before deleted clause. Default is -1 meaning no bound restriction. -BoundLoops The number of loops applying the actions restrictions/increasing bound. If the number of loops is exceeded all bound restrictions are cancelled. Default is 1. -ApplyDefs Sets the maximal number of applications of atom definitions to input formulae. Default is 0, meaning no applications at all. -Ordering Sets the term ordering. If 0 then KBO is selected, if 1 the RPOS is selected. Default is 0. -CNFQuantExch If set, non-constant Skolem terms in the clausal form of the conjecture are replaced by constants. Will automatically be set for the optimized functional translation of modal or description logic formulae. Default is 0. -CNFOptSkolem Enables/disables optimized Skolemization. Default is 1. -CNFStrSkolem Enables/disables Strong Skolemization. Default is 1. -CNFProofSteps Sets the maximal number of proof steps in an optimized Skolemization proof attempt. Default is 100. -CNFSub Enables/disables subsumption on the clauses generated by the CNF procedure. Default is 1. -CNFCon Enables/disables condensing on the clauses generated by the CNF procedure. Default is 1. -CNFRedTime Sets the overall amount of time in seconds to be spend on reduction during CNF transformation. Affected reductions are optimized Skolemization, condensing, and subsumption. Default is -1 meaning that the reduction time is not limited at all. -CNFRenaming Enables/disables formula renaming. If set to 1 optimized renaming is enabled that minimizes the number of eventually generated clauses. If set to 2 complex renaming is enabled that introduces a new Skolem predicate for every complex formula, i.e., any formula that is not a literal. If set to 3 quantification renaming is enabled that introduces a new Skolem predicate for every subformula starting with a quantifier. Default is 1. -CNFRenMatch If set, renaming variant subformulae are replaced by the same Skolem literal. Default is 1. -CNFPRenaming Enables/disables the printing of formula renaming applications. Default is 0. -CNFFEqR Enables/disables certain equality reduction techniques on the formula level. Default is 1. -IEmS Enables/disables the inference rule Empty Sort. Default is 0. -ISoR Enables/disables the inference rule Sort Resolution. Default is 0. -IEqR Enables/disables the inference rule Equality Resolution. Default is 0. -IERR Enables/disables the inference rule Reflexivity Resolution. Default is 0. -IEqF Enables/disables the inference rule Equality Factoring. Default is 0. -IMPm Enables/disables the inference rule Merging Paramodulation. Default is 0. -ISpR Enables/disables the inference rule Superposition Right. Default is 0. -IOPm Enables/disables the inference rule Ordered Paramodulation. Default is 0. -ISPm Enables/disables the inference rule Standard Paramodulation. Default is 0. -ISpL Enables/disables the inference rule Superposition Left. Default is 0. -IORe Enables/disables the inference rule Ordered Resolution. If set to 1, Ordered Resolution is enabled but no resolution inferences with equations are generated. If set to 2, equations are considered for Ordered Resolution steps as well. Default is 0. -ISRe Enables/disables the inference rule Standard Resolution. If set to 1, Standard Resolution is enabled but no resolution inferences with equations are generated. If set to 2, equations are considered for Standard Resolution steps as well. Default is 0. -ISHy Enables/disables the inference rule Standard Hyper-Resolution. Default is 0. -IOHy Enables/disables the inference rule Ordered Hyper-Resolution. Default is 0. -IURR Enables/disables the inference rule Unit Resulting Resolution. Default is 0. -IOFc Enables/disables the inference rule Ordered Factoring. If set to 1, Ordered Factoring is enabled but only factoring inferences with positive literals are generated. If set to 2, negative literals are considered for inferences as well. Default is 0. -ISFc Enables/disables the inference rule Standard Factoring. Default is 0. -IUnR Enables/disables the inference rule Unit Resolution. Default is 0. -IBUR Enables/disables the inference rule Bounded Depth Unit Resolution. Default is 0. -IDEF Enables/disables the inference rule Apply Definitions. Currently not supported. Default is 0. -RFRew Enables/disables the reduction rule Forward Rewriting. If set to 1 unit rewriting and non-unit rewriting based on a subsumption test is activated. If set to 2 in addition to unit and non-unit rewriting local contextual rewriting is activated. If set to 3 in addition to unit and non-unit rewriting subterm contextual rewriting is activiated. Subterm contextual rewriting subsumes local contextual rewriting. If set to 4 in addition of the rewriting rules of 3, subterm contextual rewriting also tests for negative literal elimination. Default is 0. -RBRew Enables/disables the reduction rule Backward Rewriting. Same values and meaning as for flag -RFRew but used in backward direction. Default is 0. -RFMRR Enables/disables the reduction rule Forward Matching Replacement Resolution. Default is 0. -RBMRR Enables/disables the reduction rule Backward Matching Replacement Resolution. Default is 0. -RObv Enables/disables the reduction rule Obvious Reduction. Default is 0. -RUnC Enables/disables the reduction rule Unit Conflict. Default is 0. -RTer Enables/disables the terminator by setting the maximal number of non-unit clauses to be used during the search. Default is 0. -RTaut Enables/disables the reduction rule Tautology Deletion. If set to 1, only syntactic tautologies are detected and deleted. If set to 2, additionally semantic tautologies are removed. Default is 0. -RSST Enables/disables the reduction rule Static Soft Typing. Default is 0. -RSSi Enables/disables the reduction rule Sort Simplification. Default is 0. -RFSub Enables/disables the reduction rule Forward Subsumption Deletion. Default is 0. -RBSub Enables/disables the reduction rule Backward Subsumption Deletion. Default is 0. -RAED Enables/disables the reduction rule Assignment Equation Deletion. This rule removes particular occurrences of equations from clauses. If set to 1, the reduction is guaranteed to be sound. If set to 2, the reduction is only sound if any potential model of the considered problem has a non-trivial domain. Default is 0. -RCon Enables/disables the reduction rule Condensation. Default is 0. -TDfg2OtterOptions Enables/disables the inclusion of an Otter options header. This option only applies to dfg2otter. If set to 1 it includes a setting that makes Otter nearly complete. If set to 2 it activates auto modus and if set to 3 it activates the auto2 modus. Default is 0. -EML A special EML flag for modal logic or description logic formulae. Never needs to be set explicitly. Is set during parsing. -EMLAuto Intended for EML Autonomous mode, as yet not functional. Default is 0. -EMLTranslation Determines the translation method used for modal logic or description logic formulae. If set to 0, the standard relational translation method (which is determined by the usual Kripke semantics) is used. If set to 1, the functional translation method is used. If set to 2, the optimised functional translation method is used. If set to 3, the semi-functional translation method is used. A variation of the optimised functional translation method is used, when the following settings are specified: -EMLTranslation=2 -EMLFuncNary=1. The translation will be in terms of n-ary predicates instead of unary predicates and paths. In the current implementation the standard relational translation method is most general. Some restrictions apply to the other methods. The functional translation method and semi-functional translation methods are available only for the basic multi-modal logic K(m) possibly with serial (total) modalities (-EMLTheory=1), plus nominals (ABox statements), terminological axioms and general inclusion and equivalence axioms. The optimised functional translation methods are implemented only for K(m), possibly with serial modalities. Default is 0. -EML2Rel If set, propositional/Boolean-type formulae are converted to relational formulae before they are translated to first-order logic. Default is 0. -EMLTheory Determines which background theory is assumed. If set to 0, the background theory is empty. If set to 1, then seriality (the background theory for KD) is added for all modalities. If set to 2, then reflexivity (the background theory for KT) is added for all modalities. If set to 3, then symmetry (the background theory for KB) is added for all modalities. If set to 4, then transitivity (the background theory for K4) is added for all modalities. If set to 5, then Euclideanness (the background theory for K5) is added for all modalities. If set to 6, then transitivity and Euclideanness (the background theory for S4) is added for all modalities. If set to 7, then reflexivity, transitivity and Euclideanness (the background theory for S5) is added for all modalities. Default is 0. -EMLFuncNdeQ If set, diamond formulae are translated according to tr(dia(phi),s) = nde(s) /\ exists x tr(phi,[s x]) (a nde / quantifier formula), otherwise the translation is in accordance with tr(dia(phi),s) = exists x nde(s) /\ tr(phi,[s x]) (a quantifier / nde formula). The transltion for box formulae is defined dually. Setting this flag is only meaningful when the flag for the functional or semi functional translation method is set. Default is 1. -EMLFuncNary If set, the functional translation into fluted logic is used. This means n-ary predicate symbols are used instead of unary predicate symbols and paths. Setting this flag is only meaningful for testing local satisfiability/validity in multi-modal K. Default is 0. -EMLFFSorts If set, sorts for terms are used. Default is 0. -EMLElimComp If set, try to eliminate relational composition in modal parameters. Default is 0. -EMLPTrans If set, the EML to first-order logic translation is documented. Default is 0. -TPTP If set, SPASS expects an input file in TPTP syntax. Default is 0. -rf If set, SPASS deletes the input file before termination. Default is 0.

**EXAMPLES**

To run SPASS on a single file without options: SPASS I<filename> To disable all SPASS output except for the final result: SPASS -PGiven=0 -PProblem=0 I<filename>

**NOTES**

You can also specify options for SPASS in the input problem. In the DFG syntax, you would use list_of_settings(SPASS). {* set_flag(DocProof,1). *} end_of_list. to set the DocProof flag. There are three types of options you can set in the input: set_flag(<flag>,<value>). Sets a flag to a value. Valid flags and values are described in the OPTIONS section. set_precedence(<comma-separated list of function and/or predicate symbols>). Sets the precedence for the listed symbols. The precedence is decreasing from left to right, i.e. the leftmost symbol has the highest precedence. Every entry in the list has the form SYMBOL | (SYMBOL, WEIGHT [, {l, r, m}]) You can use the second form to assign weights to symbols (for KBO) or a status (for RPOS). Status is either @t{l} for left-to-right, @t{m} for multiset, or @t{r} for right-to-left. Weight is given as an integer. set_DomPred(<comma-separated list of predicate symbols>). Listed predicate (DomPredfor dominant predicate) symbols are first ordered according to their precedence, not according to their argument lists. Only in case of equal predicates, the arguments are examined. For example, if we add the option set_DomPred(P). then in the clause -> R(f(x,y),a), P(x,a). the atomP(x,a)is strictly maximal. Predicates listed by theset_DomPredoption are compared according to the precedence. set_selection(<comma-separated list of predicate symbols>). Sets the selection list that can be employed by the Select flag (see above). set_ClauseFormulaRelation(<comma separated list auf tuples (<clause number>, sequence of axiom name strings)). This list is in particular set by FLOTTER and enables SPASS for an eventually found proof to show the relation between the clauses used in the proof and the input formulas. If combined with option DocProof, then there needs to be an entry for every clause number. Otherwise an error is reported. set_ClauseFormulaRelation((1,ax2),(2,ax1),(3,ax3,ax1)).

**SEE** **ALSO**

checkstat(1),filestat(1),pcs(1),pgen(1),rescmp(1),tpform(1),tpget(1),deprose(1),dfg2otter(1),dfg2otterpl(1),dfg2dfg(1)

**AUTHORS**

Contact : spass@mpi-inf.mpg.de