Provided by: osmo-bsc-bs11-utils_1.3.0-2_amd64
bs11_config - Configuration of BS-11 BTS via RS232
bs11_config [options] [command]
bs11_config is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link. It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as - querying some essential configuration values - creating and deleting TRX1 objects - download of SAFETY LOAD software - download of BTS software - creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects) - setting the Tx output power of the RF amplifier It is part of the OpenBSC base station controller software from Osmocom.
-h,--help Print this help text -p,--port </dev/ttyXXX> Specify serial port -s,--software <file> Specify Software file -S,--safety <file> Specify Safety Load file -d,--delay <ms> Specify delay in milliseconds -D,--disconnect Disconnect BTS from BSC -w,--win-size <num> Specify Window Size -f,--forced Force Software Load
query Query the BS-11 about serial number and configuration disconnect Disconnect A-bis link (go into administrative state) resconnect Reconnect A-bis link (go into normal state) restart Restart the BTS software Download Software (only in administrative state) create-trx1 Create objects for TRX1 (Danger: Your BS-11 might overheat) delete-trx1 Delete objects for TRX1 pll-e1-locked Set the PLL to be locked to E1 clock pll-standalone Set the PLL to be in standalone mode pll-setvalue <value> Set the PLL set value pll-workvalue <value> Set the PLL work value oml-tei Set OML E1 TS and TEI bport0-star Set BPORT0 line config to star bport0-multidrop Set BPORT0 line config to multidrop bport1-multidrop Set BPORT1 line config to multidrop create-bport1 Create BPORT1 object delete-bport1 Delete BPORT1 object
This manual page was written by Ruben Undheim <firstname.lastname@example.org> for the Debian project (and may be used by others). 15 November 2018 BS11_CONFIG(1)