Provided by: texlive-binaries_2018.20181218.49446-2_amd64

#### NAME

```       etex - extended (plain) TeX

```

#### SYNOPSIS

```       etex [options] [&format] [file|\commands]

```

#### DESCRIPTION

```       Run  the e-TeX typesetter on file, by default creating file.dvi.  If the file argument has
no extension, ".tex" will be appended to it.  Instead  of  a  filename,  a  set  of  e-TeX
commands  can  be  given,  the first of which must start with a backslash.  With a &format
argument e-TeX uses a different set of precompiled commands, contained in  format.fmt;  it
is usually better to use the -fmt format option instead.

e-TeX is the first concrete result of an international research & development project, the
NTS Project, which was established under the aegis of DANTE e.V. during 1992. The aims  of
the  project  are  to  perpetuate  and  develop  the  spirit and philosophy of TeX, whilst
respecting Knuth's wish that TeX should remain frozen.

e-TeX can be used in two different modes: in compatibility  mode  it  is  supposed  to  be
completely  interchangable with standard TeX.  In extended mode several new primitives are
added that facilitate (among other things) bidirectional typesetting.

An extended mode format is generated by prefixing the name of  the  source  file  for  the
format with an asterisk (*).

e-TeX's  handling  of  its  command-line  arguments  is  similar  to that of the other TeX
programs in the web2c implementation.

```

#### OPTIONS

```       This version of e-TeX understands the following command line options.

-fmt format
Use format as the name of the format to be used, instead of the name by which e-TeX
was called or a %& line.

-enc   Enable  the  encTeX  extensions.  This option is only effective in combination with
-ini.      For     documentation     of     the     encTeX      extensions      see
http://www.olsak.net/enctex.html.

-etex  Enable  the  e-TeX  extensions.   This option is only effective in combination with
-ini.

-file-line-error
Print error messages in the form file:line:error which is similar to the  way  many
compilers format them.

-no-file-line-error
Disable printing error messages in the file:line:error style.

-file-line-error-style
This is the old name of the -file-line-error option.

-halt-on-error
Exit with an error code when an error is encountered during processing.

-help  Print help message and exit.

-ini   Start  in  INI  mode,  which is used to dump formats.  The INI mode can be used for
typesetting, but no format is preloaded, and  basic  initializations  like  setting
catcodes may be required.

-interaction mode
Sets  the  interaction  mode.   The  mode  can  be  either  batchmode, nonstopmode,
scrollmode, and errorstopmode.  The meaning of these modes is the same as  that  of
the corresponding \commands.

-ipc   Send  DVI output to a socket as well as the usual output file.  Whether this option
is available is the choice of the installer.

-ipc-start
As -ipc, and starts the server at the other end as well.  Whether  this  option  is
available is the choice of the installer.

-jobname name
Use name for the job name, instead of deriving it from the name of the input file.

Sets  path  searching  debugging  flags according to the bitmask.  See the Kpathsea
manual for details.

-mktex fmt
Enable mktexfmt, where fmt must be either tex or tfm.

-mltex Enable MLTeX extensions.  Only effective in combination with -ini.

-no-mktex fmt
Disable mktexfmt, where fmt must be either tex or tfm.

-output-comment string
Use string for the DVI file comment instead of the date.

-output-directory directory
Write output files in directory instead of the current directory.   Look  up  input
files in directory first, the along the normal search path.

-parse-first-line
If the first line of the main input file begins with %& parse it to look for a dump
name or a -translate-file option.

-no-parse-first-line
Disable parsing of the first line of the main input file.

-progname name
Pretend to be program name.  This affects both  the  format  used  and  the  search
paths.

-recorder
Enable  the  filename  recorder.  This leaves a trace of the files opened for input
and output in a file with extension .fls.

-shell-escape
Enable the \write18{command} construct.  The command  can  be  any  shell  command.
This construct is normally disallowed for security reasons.

-no-shell-escape
Disable  the  \write18{command}  construct,  even if it is enabled in the texmf.cnf
file.

-src-specials
Insert source specials into the DVI file.

-src-specials where
Insert source specials in certain placed of  the  DVI  file.   where  is  a  comma-
separated value list: cr, display, hbox, math, par, parent, or vbox.

-translate-file tcxname
Use  the  tcxname  translation table to set the mapping of input characters and re-
mapping of output characters.

-default-translate-file tcxname
Like -translate-file except that a %& line can overrule this setting.

-version
Print version information and exit.

```

#### ENVIRONMENT

```       See the Kpathsearch library documentation (the `Path  specifications'  node)  for  precise
details  of  how the environment variables are used.  The kpsewhich utility can be used to
query the values of the variables.

One caveat: In most e-TeX formats, you cannot use ~ in a filename you give directly to  e-
TeX,  because  ~  is  an active character, and hence is expanded, not taken as part of the
filename.  Other programs, such as Metafont, do not have this problem.

TEXMFOUTPUT
Normally, e-TeX puts its output files in the current directory.  If any output file
cannot  be  opened  there,  it  tries  to open it in the directory specified in the
environment variable TEXMFOUTPUT.  There is no default  value  for  that  variable.
For  example,  if  you say etex paper and the current directory is not writable, if
TEXMFOUTPUT has the value  /tmp,  e-TeX  attempts  to  create  /tmp/paper.log  (and
/tmp/paper.dvi,  if any output is produced.)  TEXMFOUTPUT is also checked for input
files, as TeX often generates files that need to be subsequently read;  for  input,
no  suffixes  (such  as  ``.tex'')  are  added by default, the input name is simply
checked as given.

TEXINPUTS
Search path for \input and \openin files.  This should start with  ``.'',  so  that
user files are found before system files.  An empty path component will be replaced
with the paths defined in the  texmf.cnf  file.   For  example,  set  TEXINPUTS  to
".:/home/user/tex:"  to  prepend the current direcory and ``/home/user/tex'' to the
standard search path.

TEXFORMATS
Search path for format files.

TEXPOOL
search path for etex internal strings.

TEXEDIT
Command template for switching to editor.  The default, usually vi, is set when  e-
TeX is compiled.

TFMFONTS
Search path for font metric (.tfm) files.

```

#### FILES

```       The location of the files mentioned below varies from system to system.  Use the kpsewhich
utility to find their locations.

etex.pool
Text file containing e-TeX's internal strings.

texfonts.map
Filename mapping definitions.

*.tfm  Metric files for e-TeX's fonts.

*.fmt  Predigested e-TeX format (.fmt) files.

```

#### NOTES

```       Starting with  version  1.40,  pdfTeX  incorporates  the  e-TeX  extensions,  so  in  this
installation eTeX may be just a symbolic link to pdfTeX.  See pdftex(1).  This manual page
is not meant to be exhaustive.  The complete documentation for this version of  e-TeX  can
be found in the info manual Web2C: A TeX implementation.

```

#### BUGS

```       This  version of e-TeX implements a number of optional extensions.  In fact, many of these
extensions conflict to a greater or lesser extent with the definition of e-TeX.  When such
extensions  are  enabled,  the banner printed when e-TeX starts is changed to print e-TeXk

This version of e-TeX fails to trap arithmetic  overflow  when  dimensions  are  added  or
subtracted.   Cases  where  this  occurs are rare, but when it does the generated DVI file
will be invalid.

```

#### SEEALSO

```       pdftex(1), tex(1), mf(1).

```

#### AUTHORS

```       e-TeX was developed by Peter Breitenlohner and the NTS team;  Peter  later  continued  its
development outside of the team.

TeX  was  designed  by Donald E. Knuth, who implemented it using his Web system for Pascal
programs.  It was ported to Unix at Stanford by Howard Trickey, and at  Cornell  by  Pavel
Curtis.   The  version now offered with the Unix TeX distribution is that generated by the
Web to C system (web2c), originally written by Tomas Rokicki and Tim Morgan.

The encTeX extensions were written by Petr Olsak.
```