Provided by: fig2dev_3.2.7a-5_amd64 bug

NAME

       fig2dev - translates Fig code to various graphics languages

SYNOPSIS

       fig2dev  -L language [-m mag] [-s fsize] [-Z maxdimension]
               [-D +/-rangelist [-K]] [other  options]  [fig-file
               [out-file]]

DESCRIPTION

       fig2dev translates fig code in the named fig-file into the specified graphics language and
       puts them in out-file.  The default fig-file and out-file are standard input and  standard
       output, respectively

       Xfig (Facility for Interactive Generation of figures) is a screen-oriented tool which runs
       under  the  X  Window  System,  and  allows  the  user  to  draw  and  manipulate  objects
       interactively.   This  version  of fig2dev is compatible with xfig versions 1.3, 1.4, 2.0,
       2.1, 3.0, 3.1 and 3.2.

       Xfig version 3.2.3 and later saves and allows the user  to  edit  comments  for  each  Fig
       object.   These  comments  are  output  with  several  of  the  output  languages, such as
       PostScript, CGM, EMF, LaTeX, MetaFont, PicTeX, (as % comments), tk (as  #  comments),  and
       pic (as .\" comments).

GENERAL OPTIONS (all drivers)

       -L language
              Set  the output graphics language.  Valid languages are box, cgm, dxf, epic, eepic,
              eepicemu, emf, eps, gbx (Gerber beta driver), gif, ibmgl, jpeg,  latex,  map  (HTML
              image  map), mf (MetaFont), mp (MetaPost), pcx, pdf, pdftex, pdftex_t, pic, pict2e,
              pictex, png, ppm, ps, pstex, pstex_t, pstricks, ptk (Perl/tk), shape (LaTeX  shaped
              paragraphs),  sld  (AutoCad  slide  format),  svg, textyl, tiff, tikz, tk (tcl/tk),
              tpic, xbm and xpm.

              Notes:
              You must have ghostscript installed to get the pdf output, and ghostscript and  the
              netpbm package to get the bitmap formats (png, jpeg, etc.).

       -h     Print help message with all options for all output languages then exit.

       -V     Print the program version number and exit.

       -D +/-rangelist
              With  +rangelist,  keep  only  those depths in the list.  With -rangelist, keep all
              depths except those in the list.  The rangelist may be a  list  of  comma-separated
              numbers  or  ranges  separated  by colon (:). For example, -D +10,40,55:70,80 means
              keep only layers 10, 40, 55 through 70, and 80.

       -K     The selection of the depths with the  -D  +/-rangelist  option  does  normally  not
              affect the calculation of the bounding box.  Thus the generated document might have
              a much larger bounding box than necessary. If -K is given then the bounding box  is
              adjusted to include only those objects in the selected depths.

       -G minor[:major][:unit]
              Draws  a  grid on the page.  Specify thin, or thin and thick line spacing in one of
              several units.  For example, -G .25:1cm draws a thin, gray line every .25 cm and  a
              thicker  gray  line  every 1 cm.  Specifying -G 1in draws a thin line every 1 inch.
              Fractions may be used, e.g. -G :1/2in will draw a thick line every 1/2 inch.
              Allowable units are: i, in, inch, f, ft, feet, c, cm, mm, and m.
              Only allowed for PostScript, EPS, PDF, pstricks, tikz and bitmap (GIF,  JPEG,  etc)
              drivers.

       -j     Enable the I18N internationalization facility.

       -m mag Set  the magnification at which the figure is rendered to mag.  The default is 1.0.
              This may not be used with the maxdimension option (-Z).

       -s fsize
              Set the default font size (in points, 1/72 inch) for text objects  to  fsize.   The
              default  is  11*mag,  and thus is scaled by the -m option.  If there is no scaling,
              the default font is eleven point Roman.

       -Z maxdimension
              Scale the figure so that the maximum dimension (width or  height)  is  maxdimension
              inches  or  cm,  depending  on whether the figure was saved with imperial or metric
              units.  This may not be used with the magnification option (-m).

       other options
              The other options are specific to the choice of  graphics  language,  as  described
              below.

OPTIONS COMMON TO ALL BITMAP FORMATS

       -b borderwidth
              Make blank border around figure of width borderwidth (1/72 inch).

       -F     Use  correct  font  sizes  (points, 1/72 inch) instead of the traditional size that
              xfig/fig2dev uses, which is 1/80 inch.  The corresponding xfig command-line  option
              is -correct_font_size.

       -g color
              Use color for the background.

       -N     Convert all colors to grayscale.

       -S smoothfactor
              This  will  smooth  the  output  by  passing  smoothfactor  to  ghostscript  in the
              -dTextAlphaBits and -dGraphicsAlphaBits  options  to  improve  font  rendering  and
              graphic  smoothing.   A  value  of 2 for smoothfactor provides some smoothing and 4
              provides more.

GIF OPTIONS

       -t color
              Use color for the transparent color in the GIF file.  This must be specified in the
              same  format  that ppmmake(1) allows.  It may allow an X11 color name, but at least
              you may use a six-digit hexadecimal RGBvalue using the # sign, e.g. #ff0000 (Red).

JPEG OPTIONS

       -q image_quality
              use the integer value image_quality for the JPEG "Quality"  factor.   Valid  values
              are 0 - 100, with the default being 75.

CGM OPTIONS

       CGM  is  Computer  Graphics Metafile, developed by ISO and ANSI and is a vector-based plus
       bitmap language.  Microsoft WORD, PowerPoint and probably other products can  import  this
       format and display it on the screen, something that they won't do with EPS files that have
       an ASCII preview.

       -a     Generate binary output.

       -r     Position arrowheads for CGM viewers that  display  rounded  arrowheads.   Normally,
              arrowheads  are  pointed, so fig2dev compensates for this by moving the endpoint of
              the line back so the tip of the arrowhead ends where the original endpoint  of  the
              line  was.   If the -r option is used, the position of arrows will NOT be corrected
              for compensating line width effects, because the rounded arrowhead  doesn't  extend
              beyond the endpoint of the line.

DXF OPTIONS

       DXF is the Drawing Interchange File Format.  The output to DXF is experimental.

       -a     Select ANSI A paper size instead of the default ISO A4.

       -d xll,yll,xur,yur
              Restrict plotting to a rectangular area of the plotter paper which has a lower left
              hand corner at (xll,yll) and a upper right hand  corner  at  (xur,yur).   All  four
              numbers  are  in inches and follow -d in a comma-separated list - xll,yll,xur,yur -
              with no spaces between them.

       -P     Rotate the figure to portrait mode. The default is landscape mode.

       -v     Plot the figure upside-down in portrait mode or backwards in landscape mode.

EMF OPTIONS

       EMF is Enhanced Metafile, developed  by  Microsoft  and  is  a  vector-based  plus  bitmap
       language.   Microsoft  WORD, PowerPoint and probably other products can import this format
       and display it on the screen, something that they won't do with EPS  files  that  have  an
       ASCII preview.

       -l lang
              Set  the  compatibility  level to lang, where lang is one of win95, win98 or winnt.
              The default is winnt.

       -r     Position arrowheads for EMF viewers  that  display  rounded  arrowheads.   See  the
              discussion of the -r option for the CGM output driver above.

EPIC OPTIONS

       EPIC is an enhancement to LaTeX picture drawing environment.

       EEPIC  is  an  extension  to  EPIC  and  LaTeX picture drawing environment which uses tpic
       specials as a graphics mechanism.  It was written by Conrad Kwok of Division  of  Computer
       Science at University of California, Davis.  Conrad Kwok has also written the EEPIC driver
       of fig2dev.

       EEPIC-EMU is an EEPIC emulation package which does not use tpic specials.

       -d factor
              Scale arrowheads by factor.  The width and height of arrowheads is divided by  this
              factor.   This is because EPIC arrowheads are normally about double the size of TeX
              arrowheads.

       -E num Set encoding for text translation (0 =  none,  1  =  ISO-8859-1,  2  =  ISO-8859-2;
              default 1).

       -F     Don't  set  the  font  face,  series,  and  style;  only  set  it's  size  and  the
              baselineskip. By default, fig2dev sets all 5 font  parameters  when  it  puts  some
              text.  The  disadvantage  is  that you can't set the font from your LaTeX document.
              With this option on, you can set the font from your LaTeX document.

              If any of the pictures included in your LaTeX document has been generated with  -F,
              then all pictures must be generated with this option.

       -f font
              Set  the  default  font used for text objects to font, where font is one of rm, bf,
              it, sf or tt.  The default is rm.

       -l lwidth
              Use "\thicklines" when the width of the line is equal or wider  than  lwidth.   The
              default is 2.

       -P     Generate  a  complete  LaTeX file. In other words, the output file can be formatted
              without requiring any changes.

       -R dummyarg
              Allow rotated text. Rotated text will be set using the \rotatebox command.  So, you
              will  need  to  include  "\usepackage{graphics}"  in  the  preamble  of  your LaTeX
              document.  A dummy argument is required after the -R.

              If this option is not set, then rotated text will be set horizontally.

       -S scale
              Set the scale to which the figure is rendered.  This option automatically sets  the
              magnification  and fsize to scale/12 and scale respectively.  Scale must be between
              8 and 12, inclusively.

       -t stretch
              Set the stretch factor of dashed lines to stretch.  The default is 30.

       -v     Include comments in the output file.

       -W     Enable variable line width.  By default, only two line widths  are  available:  The
              normal  line width ("\thinlines"), and thick lines ("\thicklines"). See also the -l
              option above.

       -w     Disable variable line width. Only "\thicklines" and/or "\thinlines"  commands  will
              be generated in the output file.

              When  variable line width option is enabled, the "\thinlines" command is still used
              when the line width is less than LineThick. One potential problem is that the width
              of  "\thinlines"  is 0.4pt but the resolution of Fig is 1/80 inch (approx. 1pt). If
              LineThick is set to 2, normal lines will be drawn in 0.4pt wide lines but the  next
              line  width  is already 2pt. One possible solution is to set LineThick to 1 and set
              the width of those lines you want to be drawn in "\thinlines"  to 0.

              Due to this problem, variable line width is disabled by default (-w).

IBM-GL (HP/GL) OPTIONS

       IBM-GL  (IBM  Graphics  Language)  is  compatible  with  HP-GL  (Hewlett-Packard  Graphics
       Language).

       -a     Select ANSI A paper size instead of the default ISO A4.

       -c     Generate  instructions  for  an  IBM  6180  Color  Plotter  without an IBM Graphics
              Enhancement Cartridge (IBM-GEC).

       -d xll,yll,xur,yur
              Restrict plotting to a rectangular area of the plotter paper which has a lower left
              hand  corner  at  (xll,yll)  and  a upper right hand corner at (xur,yur).  All four
              numbers are in inches and follow -d in a comma-separated list -  xll,yll,xur,yur  -
              with no spaces between them.

       -f fontfile
              Load  text character specifications from the table in the file fontfile.  The table
              must have 36 entries - one for each font plus a default.  Each entry consists of  5
              numbers which specify the
              1.) standard character set (0 - 4, 6 - 9, 30 - 39),
              2.) alternate character set (0 - 4, 6 - 9, 30 - 39),
              3.) character slant angle (degrees),
              4.) character width scale factor and
              5.) character height scale factor.

       -k     Precede output with PCL command to use HP/GL.

       -l pattfile
              Load  area  fill line patterns from the table in the pattfile file.  The table must
              have 21 entries - one for each of the area fill patterns.  Each entry consists of 5
              numbers which specify the
              1.) pattern number (-1 - 6),
              2.) pattern length (inches),
              3.) fill type (1 - 5),
              4.) fill spacing (inches) and
              5.) fill angle (degrees).

       -P     Rotate the figure to portrait mode. The default is landscape mode.

       -p penfile
              Load plotter pen specifications from the table in the penfile file.  The table must
              have 9 entries - one for each color plus a  default.   Each  entry  consists  of  2
              numbers which specify the
              1.) pen number (1 - 8) and
              2.) pen thickness (millimeters).

       -S speed
              Set the pen speed to speed (centimeters/second).

       -v     Plot  the figure upside-down in portrait mode or backwards in landscape mode.  This
              allows you  to  write  on  the  top  surface  of  overhead  transparencies  without
              disturbing the plotter ink on the bottom surface.

       -x offset
              Shift figure left by offset inches.

       -y offset
              Shift figure up by offset inches.

       Fig2dev  may  be installed with either ANSI A or ISO A4 default paper size.  The -a option
       selects the alternate paper size.  Fig2dev does not fill closed splines.  The  IBM-GEC  is
       required  to  fill  other polygons.  Fig2dev may be installed for plotters with or without
       the IBM-GEC.  The -c option selects the alternate instruction set.

LATEX OPTIONS

       -b borderwidth
              Make blank border around figure of width borderwidth (1/72 inch).

       -d dmag
              Set a separate magnification for the length of line dashes to dmag.

       -E num Set encoding for latex text translation (0 = no translation, 1 =  ISO-8859-1,  2  =
              ISO-8859-2; default 1).

       -F     Don't  set  the  font  face,  series,  and  style;  only  set  it's  size  and  the
              baselineskip. By default, fig2dev sets all 5 font  parameters  when  it  puts  some
              text.  The  disadvantage  is  that you can't set the font from your LaTeX document.
              With this option on, you can set the font from your LaTeX document.

              If any of the pictures included in your LaTeX document has been generated with  -F,
              then all pictures must be generated with this option.

       -f font
              Set  the  default  font used for text objects to font, where font is one of rm, bf,
              it, sf or tt.  The default is rm.

       -l lwidth
              Sets the threshold between LaTeX thin and thick  lines  to  lwidth  pixels.   LaTeX
              supports  only  two  different  line  widths: \thinlines and \thicklines.  Lines of
              width greater than lwidth pixels are drawn as \thicklines.  Also affects  the  size
              of dots in dotted line style.  The default is 1.

       -v     Verbose mode. Include comments in the otput file.

       LaTeX  cannot accurately represent all the graphics objects which can be described by Fig.
       For example, the possible slopes which lines may have are limited.  Some objects, such  as
       spline curves, cannot be drawn at all.  Fig2latex chooses the closest possible line slope,
       and prints error messages when objects cannot be drawn accurately.

MAP (HTML image map) OPTIONS

       Xfig version 3.2.3 and later saves and allows the user  to  edit  comments  for  each  Fig
       object.   The fig2dev map output language will produce an HTML image map using Fig objects
       that have href="some_html_reference" in their comments.  Any Fig  object  except  compound
       objects  may  be  used for this.  Usually, besides generating the map file, you would also
       generate a PNG file, which is the image to which the map refers.

       For example, you may have an xfig drawing with an imported  image  that  has  the  comment
       href="go_here.html"  and  a  box  object  with  a  comment href="go_away.html".  This will
       produce an image map file such the user may click on the image and the browser  will  load
       the  "go_here.html" page, or click on the box and the browser will load the "go_away.html"
       page.

       After the map file is generated by fig2dev you will need  to  edit  it  to  fill  out  any
       additional information it may need.

       -b borderwidth
              Make blank border around figure of width borderwidth (1/72 inch).

METAFONT OPTIONS

       Fig2dev  scales  the figure by 1/8 before generating METAFONT code.  The magnification can
       be further changed with the -m option or by giving magnification options to mf.

       In order to process the generated METAFONT code, the mfpic macros must be installed  where
       mf  can  find  them.  The  mfpic  macro  package  is  available at any CTAN cite under the
       subdirectory: graphics/mfpic

       -C code
              Specify the starting METAFONT font code. The default is 32.

       -n name
              Specify the name to use in the output file.

       -p pen_magnification
              Specify how much the line width  should  be  magnified  compared  to  the  original
              figure. The default is 1.

       -t top Specify the top of the whole coordinate system.  The default is ypos.

       -x xmin
              Specify the minimum x coordinate value of the figure (inches). The default is 0.

       -y ymin
              Specify the minimum y coordinate value of the figure (inches). The default is 0.

       -X xmax
              Specify the maximum x coordinate value of the figure (inches). The default is 8.

       -Y ymax
              Specify the maximum y coordinate value of the figure (inches). The default is 8.

METAPOST OPTIONS

       -d file
              Include file content as additional header.

       -i file
              Include file content via \input-command.

       -M     Multipage mode, generate one figure for each depth.

       -o     Old mode (no latex).

       -p number
              Adds the line "prologues:=number" to the output.

PIC OPTIONS

       -f font
              Set the default font used for text objects to font, where font is one of R (roman),
              B (bold), I (italic), H (sans serif) or C (typewriter).  The default is R.

       -p ext Enables the use of certain PIC extensions which are known to work  with  the  groff
              package;  compatibility  with  DWB  PIC is unknown.  The extensions enabled by each
              option are:

           arc     Allow ARC_BOX i.e. use rounded corners
           line    Use the 'line_thickness' value
           fill    Allow ellipses to be filled
           all     Use all of the above
           psfont  Don't convert PostScript fonts generic type
                   (useful for files going to be Ditroff'ed for
                   and printed on PS printer). DWB-compatible.
           allps   Use all of the above (i.e. "all" + "psfont")

PICT2E OPTIONS

       PICT2E is an enhancement to the LaTeX picture environment.  It  is  enabled  by  inserting
       "\usepackage{pict2e}" in the document preamble. Depending on the content of the figure, it
       may be necessary to also include "\usepackage{color}" and "\usepackage{graphics}". Figures
       produced  with  the  PICT2E  driver  can be processed with any LaTeX engine, e.g., LaTeX +
       dvips, LaTeX + dvipdfm, pdflatex, xelatex, ConTeX, etc.  Pattern fills are  not  supported
       by  the  PICT2E  output  language.  The  PICT2E  driver  renders  patterns  by filling the
       respective area with the pen-color at 25% intensity, i.e., a 75% tint  of  the  pen-color.
       The  PICT2E  driver allows one to choose any font available to the LaTeX engine, including
       PostScript fonts.

       -b borderwidth
              Make blank border around figure of width borderwidth*(1/72) inches.

       -C num Do not emit a \color-command for the color number num. (0 = black, 1 =  blue,  2  =
              green  - see the color chooser widget in Xfig).  By default, fig2dev does not issue
              a \color-command for objects which have the color set to "Default" in  xfig.   With
              this option, the "\color"-command is also omitted for objects having the color num.
              The color of these objects, as well as of those having the color set to  "Default",
              is picked up from the including LaTeX-document.

              The option -C 0 is particularly useful.  By default, xfig starts with the color set
              to black.  Then, fig2dev emits "\color{black}" commands, and the color-package must
              be included in the document preamble.  For black text and black-and-white drawings,
              this is superfluous.

       -e     Do not try  to  be  compatible  with  epic/eepic.   By  default,  you  can  include
              "\usepackage{pict2e,  epic,  eepic}"  (in this order!) in the document preamble and
              mix LaTeX pictures using the epic/eepic command set and pictures produced with  the
              PICT2E  output  language  within  one  document. With this option on, epic or eepic
              pictures can not be mixed with PICT2E-pictures.

              By default, fig2dev avoids the use of the "\circle" and "\oval"-commands, which are
              defined  by  epic,  in  lieu  of  the  "\circlearc"-command exclusive to pict2e. In
              addition, line widths are not only set using "\linethickness", but  also  with  the
              eepic-command "\allinethickness" (if it is defined).

       -E num Set  encoding  for  text  translation  (0  =  no  translation,  1 = ISO-8859-1, 2 =
              ISO-8859-2; default 1).  For instance, to use utf8-encoded  text,  first  create  a
              text object, then edit the text using the edit-button in xfig. Convert the fig-file
              to pict2e with the option -E 0 and  include  "\usepackage[utf8]{inputenc}"  in  the
              LaTeX  file  In  xfig,  the  text  typed in may not be displayed correctly, but the
              document produced from the LaTeX file will show the same text as was typed in.

       -F     Do not set the font family, series or shape.  By default,  fig2dev  sets  the  font
              family,  series,  shape, font size and baselineskip.  With this option on, the text
              font  can   be   set   from   the   including   LaTeX-document,   e.g.,   "\itshape
              \input{fig1.pict2e}".  See also -o (no font size).

       -f font
              Set  the default font used for text objects to font.  The string font may be one of
              rm, bf, it, sf, tt, \rmfamily, \bfseries, \itshape, \sffamily, \ttfamily, or one of
              the 35 standard PostScript font names.  The default is \rmfamily.

       -i dir Prepend  the  string  dir  to  graphics  files included in the pict2e-picture.  For
              instance, having imported "image.jpg" in xfig, with -i  '$HOME/Figures/'  the  code
              "\incudegraphics{$HOME/Figures/image.jpg}" will be generated.

       -o     Do not set the font size or baselineskip. Text will be rendered at the size that is
              in force where the pict2e-code is inserted into the LaTeX-document,  e.g.,  "\small
              \input{fig1.pict2e}".  See also -F (no font properties).

       -O     Do  not  quote  characters special to TeX/LaTeX.  Useful to get, e.g., an italic x,
              not $x$, because it was forgotten to set  the  text-flag  "special-text"  in  xfig.
              This option effectively sets the "special-text" flag for all text.

       -P     Pagemode, generate a stand-alone LaTeX-file as out-file. The document produced from
              the LaTeX-file will have the paper size equal to the figure's bounding box (but see
              the  -b  option  to  add  a  margin).   The  generated LaTeX-file calls the package
              "geometry.sty" to set the paper size.

       -R num Replace arrowheads num by LaTeX-arrows ("\vector").  The  number  of  an  arrowhead
              ("Arrow Type" in xfig) can be found by opening the arrow chooser widget in xfig and
              counting the arrows, starting from 1.  For instance,  to  replace  filled  triangle
              arrowheads with LaTeX \vector-commands, use -R 3.

       -r     Replace all arrows by LaTeX-arrows.

       -T     Only use TeX fonts, even where PostScript-fonts are specified.

       -v     Verbose  mode. Write comment lines into the output file, usually naming the type of
              the object that is drawn.

       -w     Remove the suffix from included  graphics-files.   With  this  option  on,  fig2dev
              generates   code   that   contains,   e.g.,  "\includegraphics{fig1}",  instead  of
              "\includegraphics{fig1.eps}".

PICTEX OPTIONS

       In order to include PiCTeX pictures into a document, it is necessary to  load  the  PiCTeX
       macros.

       PiCTeX  uses  TeX  integer register arithmetic to generate curves, and so it is very slow.
       PiCTeX draws curves by \put-ing the psymbol repeatedly, and so requires a large amount  of
       TeX's internal memory, and generates large DVI files.  The size of TeX's memory limits the
       number of plot symbols in a picture.  As a result, it is best to use  PiCTeX  to  generate
       small pictures.

       -a     Anonymous mode. Do not write the user name into the output file.

       -E num Set  encoding  for  latex text translation (0 = no translation, 1 = ISO-8859-1, 2 =
              ISO-8859-2; default 1).

       -f font
              Set the default font used for text objects to font, where font is one  of  rm,  bf,
              it, sf or tt.  The default is rm.

       -l dimen
              Set line thickness to dimen. Default "1pt".

       -p psymbol
              Set the psymbol.  Default "\makebox(0,0)[l]{\tencirc\symbol{'160}}".

       -r     Do  not  allow  rotated  text. Otherwise, files with PiCTeX macros and rotated text
              need to be processed with dvips.

GBX OPTIONS (Gerber, RS-247-X)

       Typically you will wish to set the y scale to -1.  See -g for more information.

       -d [mm|in]
              Output dimensions should be assumed to be millimeters (mm)  or  inches  (in).   The
              default is millimeters.

       -p [pos|neg]
              Select  the  image  polarity.  For positive images lines drawn in the fig file will
              generate lines of material.  For negative images lines drawn in the fig  file  will
              result  in removed material.  Consider etching a chrome on glass transmission mask.
              Drawing lines in the fig file and choosing 'neg' will result in these  lines  being
              etched through the chrome, leaving transparent lines.

       -g <x scale>x<y scale>+<x offset>+<y offset>
              This  controls  the  geometry  of  the  output, scaling the dimensions as shown and
              applying the given offset.  Typically you will wish to  set  the  y  scale  to  -1,
              mirroring about the x axis.  This is because Gerber assumes the origin to be bottom
              left, while xfig selects top left.

       -f <n digits>.<n digits>
              This controls the number of digits  of  precision  before  and  after  the  implied
              decimal point.  With -f 5.3 the following number 12345678 corresponds to 12345.678.
              Whereas with -f 3.5 it corresponds to 123.45678.   The  default  is  for  3  places
              before  the  decimal point and 5 after.  This corresponds, to a range of 0 to 1m in
              10 micron increments.

       -v     Output comments describing the type of objects being output.  The text  appears  as
              comments starting with ## on each line in the output file.

POSTSCRIPT, ENCAPSULATED POSTSCRIPT (EPS), and PDF OPTIONS

       With  PostScript, xfig can be used to create multiple page figures.  Specify the -M option
       to produce a multi-page output.  For posters, add -O to overlap the pages slightly to  get
       around  the problem of the unprintable area in most printers, then cut and paste the pages
       together.  Great for text with very big letters.

       The EPS driver has the following differences from PostScript:
           o No showpage is generated because the output is meant to  be  imported  into  another
           program or document and not printed
           o The landscape/portrait options are ignored
           o The centering option is ignored
           o The multiple-page option is ignored
           o The paper size option is ignored
           o The x/y offset options are ignored

       The EPS driver has the following two special options:

       -B 'Wx [Wy X0 Y0]'
              This  specifies  that the bounding box of the EPS file should have the width Wx and
              the height Wy.  Note that it doesn't scale the figure to this size, it merely  sets
              the  bounding  box.   If a value less than or equal to 0 is specified for Wx or Wy,
              these are set to the width/height respectively of the figure.  Origin  is  relative
              to  screen (0,0) (upper-left).  Wx, Wy, X0 and Y0 are interpreted in centimeters or
              inches depending on the measure given in the  fig-file.   Remember  to  put  either
              quotes (") or apostrophes (') to group the arguments to -B.

       -R 'Wx [Wy X0 Y0]'
              Same as the -B option except that X0 and Y0 is relative to the lower left corner of
              the figure.  Remember to put either quotes (") or  apostrophes  (')  to  group  the
              arguments to -R.

       The  PDF  driver  accepts  all  of  the PostScript options, if the -P (pagemode) option is
       given.  In this case, the size of the PDF is the pagesize given in the file  or  set  from
       the  command line via the -z option.  Otherwise, if -P is not given, the PDF is cropped to
       the bounding box of the figure (optionally with a  blank  border  margin  set  by  the  -b
       option), and all of the EPS options are supported.

       Text  can now include various ISO-character codes above 0x7f, which is useful for language
       specific characters to be printed directly.  Not all ISO-characters are implemented.

       Color support: Colored objects created by  Fig  can  be  printed  on  a  color  postscript
       printer.  There  are  32 standard colors: black, yellow, white, gold, five shades of blue,
       four shades of green, four shades of cyan, four shades of red,  five  shades  of  magenta,
       four  shades  of  brown,  and  four shades of pink.  In addition there may be user-defined
       colors in the file.  See the xfig FORMAT3.2 file for the definition of these colors.  On a
       monochrome  printer,  colored  objects  will  be  mapped  into different grayscales by the
       printer.  Filled objects are printed using the given area fill and color.   There  are  21
       "shades"  going  from black to full saturation of the fill color, and 21 more "tints" from
       full saturation + 1 to white.  In addition, there are 16 patterns such as bricks, diagonal
       lines, crosshatch, etc.

       -A     Add an ASCII (EPSI) preview.  Not for PDF.

       -a     Anonymous mode. Do not write the user's login name into the output file.

       -b borderwidth
              Make blank border around figure of width borderwidth (1/72 inch).

       -C dummy_arg
              Add  a  color  *binary*  TIFF  preview  for  Microsoft  products that need a binary
              preview.  See also -T (monochrome preview).  A dummy argument must be supplied  for
              historical reasons.  Not for PDF output.

       -c     Center  the  figure  on  the  page.  The centering may not be accurate if there are
              texts in the fig_file that extends too far to the right of other objects.

       -e     Put the figure against the edge (not centered) of the page.  Not available in EPS.

       -F     Use correct font sizes (points, 1/72 inch) instead of  the  traditional  size  that
              xfig/fig2dev  uses, which is 1/80 inch.  The corresponding xfig command-line option
              is -correct_font_size.

       -f font
              Set the default font used for text objects to font, where font is  one  of  the  35
              standard PostScript font names.  The default is Times-Roman.

       -g color
              Use color for the background.

       -l dummy_arg
              Generate  figure in landscape mode.  The dummy argument is ignored, but must appear
              on the command line for reasons of compatibility.  This option  will  override  the
              orientation  specification  in  the  file  (for file versions 3.0 and higher).  Not
              available in EPS.

       -M     Generate multiple pages if figure exceeds paper size.  Not available in EPS.

       -N     Convert all colors to grayscale.

       -n name
              Set the Title part of the PostScript output to name.  This is useful when the input
              to fig2dev comes from standard input.

       -O     When  used  with  -M,  overlaps the pages slightly to get around the problem of the
              unprintable area in most printers.  Not available in EPS.

       -p dummy_arg
              Generate figure in portrait mode.  The dummy argument is ignored, but  must  appear
              on  the  command  line for reasons of compatibility.  This option will override the
              orientation specification in the file (for file versions 3.0 and higher).  This  is
              the default for Fig files of version 2.1 or lower.  Not available in EPS.

       -T     Add  a  monochrome  *binary* TIFF preview for Microsoft products that need a binary
              preview.  See also -C (color preview).  Not available for PDF output.

       -x offset
              Shift the figure in the X direction by offset PostScript  points  (1/72  inch).   A
              negative  value  shifts  the  figure to the left and a positive value to the right.
              Not available in EPS.

       -y offset
              Shift the figure in the Y direction by offset points (1/72 inch).  A negative value
              shifts the figure up and a positive value down.  Not available in EPS.

       -z papersize
              Set the papersize.  Not available in EPS.
              Available paper sizes are:

                  Letter    (8.5" x 11" also A),
                  Legal     ( 11" x 14")

                  Ledger    ( 11" x 17"),
                  Tabloid   ( 17" x 11", really Ledger in Landscape mode),
                  A         (8.5" x 11" also Letter),
                  B         ( 11" x 17" also Ledger),
                  C         ( 17" x 22"),
                  D         ( 22" x 34"),
                  E         ( 34" x 44"),
                  A9        ( 37 mm x  52 mm),
                  A8        ( 52 mm x  74 mm),
                  A7        ( 74 mm x 105 mm),
                  A6        (105 mm x 148 mm),
                  A5        (148 mm x 210 mm),
                  A4        (210 mm x 297 mm),
                  A3        (297 mm x 420 mm),
                  A2        (420 mm x 594 mm),
                  A1        (594 mm x 841 mm),
                  A0        (841 mm x1189 mm),
                  B10       ( 32 mm x  45 mm),
                  B9        ( 45 mm x  64 mm),
                  B8        ( 64 mm x  91 mm),
                  B7        ( 91 mm x 128 mm),
                  B6        (128 mm x 182 mm),
                  B5        (182 mm x 257 mm),
                  B4        (257 mm x 364 mm),
                  B3        (364 mm x 515 mm),
                  B2        (515 mm x 728 mm),
                  B1        (728 mm x1030 mm),
                  B0        (1030mm x1456 mm).

PSTEX and PDFTEX OPTIONS

       The  pstex  and pdftex languages are a variant of ps which suppress text that has the text
       flag "TeX Text" set.  The pstex_t and pdftex_t languages have the complementary  behavior:
       they generate only the text that has the "Tex Text" flag set and the commands necessary to
       position this text. They also generate the commands necessary to overlay the PostScript or
       PDF file generated using pstex/pdftex.  These two drivers can be used to generate a figure
       which combines the flexibility of PostScript graphics with LaTeX text formatting  of  text
       flagged as "TeX Text".

       The pstex and pdftex drivers accept the same options that the EPS driver accepts.

       -n name
              Set the Title part of the PostScript output to name.  This is useful when the input
              to fig2dev comes from standard input.

PSTEX_T and PDFTEX_T OPTIONS

       The pstex_t and pdftex_t languages produce only the text flagged with the "TeX Text" flag,
       the  commands  necessary  to position this text, and the commands necessary to overlay the
       PostScript or PDF file generated using pstex or pdftex (see above).

       -E num Set encoding for  latex  text  translation  (0  no  translation,  1  ISO-8859-1,  2
              ISO-8859-2; default 1)

       -F     Don't  set  the  font  face,  series,  and  style;  only  set  it's  size  and  the
              baselineskip. By default, fig2dev sets all 5 font  parameters  when  it  puts  some
              text.  The  disadvantage  is  that you can't set the font from your LaTeX document.
              With this option on, you can set the font from your LaTeX document (like  "\sfshape
              \input picture.eepic").

       -p file
              specifies  the name of the PostScript file to be overlaid.  If not set or its value
              is null then no PS file will be inserted.

PSTricks OPTIONS

       The PSTricks driver provides full LaTeX text and math formatting for XFig drawings without
       overlaying  separate  outputs  as in the PSTEX methods.  The output matches the quality of
       output of the PostScript driver except for text, where the Latex font selection  mechanism
       is  used as for other fig2dev LaTeX drivers. In addition, text is rendered black, although
       font color-changing LaTex code can be embedded in the  drawing.   The  generated  PSTricks
       code  is  meant  to  be readable.  Each command stands alone, not relying on global option
       state variables.  Thus the user can easily use XFig to rough out a PSTricks drawing,  then
       finish by hand editing.

       To  use  the  driver's  output,  give the command "\usepackage{pstricks}" in your document
       preamble.  The graphicx and pstricks-add packages may also be  required.   The  former  is
       used  for  bitmap  graphics  and the second for complex line styles and/or hollow PSTricks
       arrows (with the -R 1 option).  The driver will tell you which packages  are  needed.   In
       the  document  body,  include  the  figure with "\input{pstfile}" where pstfile.tex is the
       output file.  Use the XFig special flag to have text passed  as-is  to  LaTeX.   For  non-
       special  text,  the same mechanism as the LaTeX and epic driver mechanism is used to match
       font specs, but this is imprecise.

       Known bugs and limitations.
              PSTricks support for join styles is version dependent. Raw postscript  is  inserted
              with  "\pstVerb"  for  old versions when other than angle joins are needed.  The -t
              option controls this behavior. PSTricks does not support rotated ellipses directly,
              so  a  rput command is emitted that rotates and locates a horizontal ellipse.  This
              makes a problem with hatch patterns, which are moved and  rotated  along  with  the
              ellipse.   Hatch  rotation  is  fixed  by a counter-rotation, but the origin is not
              adjusted, so registration with adjacent hatch patterns will be incorrect.   Flipped
              bitmap  graphics  use  an  undocumented feature of the graphicx package: a negative
              height flips the image vertically.  This appears to work  reliably.   However,  you
              may  want  to  flip  graphics  with  another  program before including them in Xfig
              drawings just to be sure.  With the -p option, the driver attempts to convert  non-
              EPS  pictures  to EPS with the TeX distribution's bmeps program, but bmeps does not
              know about very many file formats including gif.

       -f font
              Set the default font used for text objects to font, where font is one  of  rm,  bf,
              it, sf or tt.  The default is rm.

       -G dummy_arg
              Draws  a  standard  PSTricks  grid  in  light  gray,  ignoring the size parameters,
              numbered in PSTricks units.

       -l weight
              Sets a line weight factor that is multiplied by the actual  Fig  line  width.   The
              default value 0.5 roughly matches the output of the PS driver.

       -n 0|1|2|3
              Sets  environment type.  Default 0 creates a \picture environment with bounding box
              exactly enclosing the picture (but see -x and  -y  ).   A  1  emits  bare  PSTricks
              commands with no environment at all, which can be used with \input{commands} inside
              an existing \pspicture.  A 2 emits a complete LaTeX document.  A  3  also  emits  a
              complete  LaTeX  document  but attempts to set the PSTricks unit to fit a 7.5 by 10
              inch (portrait aspect) box.

       -P     Shorthand for -n 3.

       -p dir Attempts to run the bmeps program to translate  picture  files  to  EPS,  which  is
              required  by  PSTricks.   The translated files go in dir , which must already exist
              (the driver will not create it). Moreover, (BIG CAVEAT HERE) the driver  overwrites
              files   with  impunity  in  this  directory!   Don't  put  your  stuff  here.   The
              includegraphics commands in the output file refer to this directory.  Even  if  the
              -p  option  is  not  used, includegraphics commands follow this convention with the
              default directory ./eps  .   In  this  case,  the  user  must  do  the  conversions
              independently.   The  bmeps  program  is  part of the standard TeX distribution. It
              converts the following formats to EPS: png jpg pnm tif.   You  can  see  the  bmeps
              command with the -v option.

       -R 0|1|2
              Sets  arrow style.  With the default style 0, Fig arrows are converted to lines and
              polygons.  With style 1, the Fig arrowhead dimensions  are  converted  to  PSTricks
              arrowhead  dimensions  and  PSTricks  arrowhead options are emitted.  Hollow arrows
              will require the additional package pstricks-add.  With style 2, PSTricks arrowhead
              options are emitted with no dimensions at all, and arrowhead size may be controlled
              globally with psset.

       -S scale
              Scales the image according to the same convention as the EPIC driver, i.e., to size
              scale/12.

       -t version
              Provides the driver with PSTricks version number so output can match expected LaTeX
              input.

       -v     Print verbose warnings and extra comments in the output file.  Information provided
              includes font substitution details, the bmeps commands used for picture conversion,
              if any, and one comment per Fig object in the output.

       -x marginsize
              Adds marginsize on the left and right of the PStricks bounding  box.   By  default,
              the box exactly encloses the image.

       -y marginsize
              Adds  marginsize  on  the top and bottom of the PStricks bounding box.  By default,
              the box exactly encloses the image.

       -z 0|1|2
              Sets font handling option.  Default option 0 attempts to honor Fig font  names  and
              sizes, finding the best match with a standard LaTeX font.  Option 1 sets LaTeX font
              size only.  Option 2 issues no font commands at all.

TEXTYL OPTIONS

       -f font
              Set the default font used for text objects to font, where font is one  of  rm,  bf,
              it, sf or tt.  The default is rm.

       -l lwidth
              Set the line thickness. lwidth must be a value between 1 and 12.

TIKZ OPTIONS

       TIKZ  is  a  powerful  frontend  to  the  Portable Graphics Format (PGF) developed by Till
       Tantau, now at the University of L├╝beck.  TIKZ was developed to be as platform-independent
       as  possible,  i.e.,  tikz-code  can  be  processed  with plain TeX, pdftex, xetex, LaTeX,
       ConTeX, pdflatex, lualatex, or combinations of LaTeX + dvips, LaTeX + dvipdfm  or  others.
       The  TIKZ-code  emitted  by  fig2dev  tries to maintain this portability.  For instance, a
       tikz-picture is commenced  with \tikzpicture (TeX-style), to not  exclude  any  processing
       engine.   However, the stand-alone file produced with the -P option must be processed with
       a LaTeX-engine.  In addition, font-commands may require a LaTeX engine.

       -b borderwidth
              Make blank border around figure of width borderwidth*(1/72) inches.

       -C num Do not emit a \color-command for the color number num. (0 = black, 1 =  blue,  2  =
              green  - see the color chooser widget in Xfig).  By default, fig2dev does not issue
              a \color-command for objects which have the color set to "Default" in  xfig.   With
              this option, the "\color"-command is also omitted for objects having the color num.
              The color of these objects, as well as of those having the color set to  "Default",
              is picked up from the including document.

       -E num Set  encoding  for  text  translation  (0  =  no  translation,  1 = ISO-8859-1, 2 =
              ISO-8859-2; default 1).  For instance, to use utf8-encoded  text,  first  create  a
              text object, then edit the text using the edit-button in xfig. Convert the fig-file
              to tikz with the option -E 0 and include "\usepackage[utf8]{inputenc}" in the LaTeX
              file  (not  necessary  when using xelatex).  In  xfig, the text typed in may not be
              displayed correctly, but the document produced from the LaTeX file  will  show  the
              same text as was typed in.

       -F     Do  not  set  the  font family, series or shape.  By default, fig2dev sets the font
              family, series, shape, font size and baselineskip.  As a side effect, this requires
              the  New Font Selection Scheme (NFSS) of LaTeX.  With this option on, the text font
              can be set from the including document, which may be TeX or LaTeX.  See also -o (no
              font size).

       -f font
              Set  the default font used for text objects to font.  The string font may be one of
              rm, bf, it, sf, tt, \rmfamily, \bfseries, \itshape, \sffamily, \ttfamily, or one of
              the 35 standard PostScript font names.  The default is \rmfamily.

       -i dir Prepend  the  string  dir  to  graphics  files  included  in the tikz-picture.  For
              instance, having imported "image.jpg" in xfig, with - i '$HOME/Figures/'  the  code
              "\pgfimage[width=..., height=...]{$HOME/Figures/image.jpg}" will be generated.

       -O     Do  not  quote  characters special to TeX/LaTeX.  Useful to get, e.g., an italic x,
              not $x$, because it was forgotten to set  the  text-flag  "special-text"  in  xfig.
              This option effectively sets the "special-text" flag for all text.

       -o     Do not set the font size or baselineskip. Text will be rendered at the size that is
              in force where the tikz-code is inserted into  the  document,  e.g.,  "\small\input
              fig1.tikz".  See also -F (no font properties).

       -P     Pagemode, generate a stand-alone LaTeX-file as out-file. The document produced from
              the LaTeX-file will have the paper size equal to the figure's bounding box (but see
              the  -b  option  to  add  a  margin).   The  generated LaTeX-file calls the package
              "geometry.sty" to set the paper size.

       -T     Only use TeX fonts, even where PostScript-fonts are specified.

       -v     Verbose mode. Write comment lines into the output file, usually naming the type  of
              the object that is drawn.

       -W     Do  not  emit  code  at the beginning of the file that allows one to set the figure
              width  or   height   from   the   including   TeX   document.    Otherwise,   e.g.,
              "\newdimen\XFigwidth\XFigwidth=\linewidth" would scale the following figures to the
              line width.

       -w     Remove the suffix from included  graphics-files.   With  this  option  on,  fig2dev
              generates    code    that    contains,    e.g.,    "\pgfimage{fig1}"   instead   of
              "\pgfimage{fig1.pdf}".

TK and PTK OPTIONS (tcl/tk and Perl/tk)

       Arc-boxes are not supported for the tk output language, and only  X  bitmap  pictures  are
       supported because of the canvas limitation in tk.
       Picture objects are not scaled with the magnification factor for tk output.
       Because  tk  scales  canvas  items according to the X display resolution, polygons, lines,
       etc. may be scaled differently than imported pictures (bitmaps)  which  aren't  scaled  at
       all.

       -g color
              Use color for the background.

       -l dummy_arg
              Generate  figure in landscape mode.  The dummy argument is ignored, but must appear
              on the command line for reasons of compatibility.  This option  will  override  the
              orientation specification in the file (for file versions 3.0 and higher).

       -p dummy_arg
              Generate  figure  in portrait mode.  The dummy argument is ignored, but must appear
              on the command line for reasons of compatibility.  This option  will  override  the
              orientation  specification in the file (for file versions 3.0 and higher).  This is
              the default for Fig files of version 2.1 or lower.

       -P     Generate canvas of full page size instead of using the bounding box of the figure's
              objects. The default is to use only the bounding box.

       -w     Wrap  the figure with code in order to generate a complete perl file.  That is, you
              can do fig2dev -L ptk -w f.fig f.pl; perl f.pl and a widget pops up that shows  the
              graphics contained in f.pl.  Only available for ptk output.

       -z papersize
              Set the paper size.  See the POSTSCRIPT OPTIONS for available paper sizes.  This is
              only used when the -P option (use full page) is used.

TPIC OPTIONS

       -f font
              Set the default font used for text objects to font.  The default is rm.  The string
              font  can  be  one of rm, bf, it, sf, tt, avant, avantcsc, avantd, avantdi, avanti,
              bookd, bookdi, bookl, booklcsc, bookli, chanc, cour, courb,  courbi,  couri,  helv,
              helvb,  helvbi,  helvc,  helvcb, helvcbi, helvci, helvcsc, helvi, pal, palb, palbi,
              palbu, palc, palcsc, pali, palsl,  palu,  palx,  times,  timesb,  timesbi,  timesc,
              timescsc, timesi, timessl or timesx.

SEE ALSO

       xfig(1), pic(1), pic2fig(1), transfig(1)

BUGS and RESTRICTIONS

       Please send bug reports, fixes, new features etc. to:
       thomas.loimer@tuwien.ac.at

COPYRIGHT

       Copyright (c) 1991 Micah Beck
       Parts Copyright (c) 1985-1988 Supoj Sutantavibul
       Parts Copyright (c) 1989-2015 Brian V. Smith
       Parts Copyright (c) 2015-2018 by Thomas Loimer

       Permission  to use, copy, modify, distribute, and sell this software and its documentation
       for any purpose is hereby granted without fee, provided that the  above  copyright  notice
       appear in all copies and that both that copyright notice and this permission notice appear
       in supporting documentation. The authors make no representations about the suitability  of
       this  software  for  any  purpose.   It  is  provided  "as  is" without express or implied
       warranty.

       THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,  INCLUDING  ALL  IMPLIED
       WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
       SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING  FROM  LOSS
       OF  USE,  DATA  OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
       ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

AUTHORS

       Micah Beck
       Cornell University
       Sept 28 1990

       and Frank Schmuck (then of Cornell University)
       and Conrad Kwok (then of U.C. Davis).

       Drivers contributed by
       Jose Alberto Fernandez R. (U. of Maryland)
       and Gary Beihl (MCC)

       Color support, ISO-character encoding and poster support by
       Herbert Bauer (heb@regent.e-technik.tu-muenchen.de)

       Modified from f2p (fig to PIC), by the author of Fig
       Supoj Sutanthavibul (supoj@sally.utexas.edu)
       University of Texas at Austin.

       MetaFont driver by
       Anthony Starks (ajs@merck.com)

       X-splines code by
       Carole Blanc (blanc@labri.u-bordeaux.fr)
       Christophe Schlick (schlick@labri.u-bordeaux.fr)
       The initial implementation was done by C. Feuille, S. Grobois, L. Maziere and  L.  Minihot
       as a student practice (Universite Bordeaux, France).

       Japanese text support for LaTeX output written by T. Sato (VEF00200@niftyserve.or.jp)

       The tk driver was written by
       Mike Markowski (mm@udel.edu) with a little touch-up by Brian Smith

       The CGM driver (Computer Graphics Metafile) was written by
       Philippe Bekaert (Philippe.Bekaert@cs.kuleuven.ac.be)

       The EMF driver (Enhanced Metafile) was written by
       Michael Schrick (m_schrick@hotmail.com)

       The GBX (Gerber) driver was written by
       Edward Grace (ej.grace@imperial.ac.uk).