Provided by: findutils_4.6.0+git+20190209-2_amd64 bug

NAME

       find - search for files in a directory hierarchy

SYNOPSIS

       find [-H] [-L] [-P] [-D debugopts] [-Olevel] [starting-point...] [expression]

DESCRIPTION

       This  manual page documents the GNU version of find.  GNU find searches the directory tree
       rooted at each given starting-point by evaluating the given expression from left to right,
       according  to  the rules of precedence (see section OPERATORS), until the outcome is known
       (the left hand side is false for and operations, true for or), at which point  find  moves
       on to the next file name.  If no starting-point is specified, `.' is assumed.

       If  you  are  using find in an environment where security is important (for example if you
       are using it to search directories that are writable by other users), you should read  the
       `Security  Considerations' chapter of the findutils documentation, which is called Finding
       Files and comes with findutils.  That  document  also  includes  a  lot  more  detail  and
       discussion than this manual page, so you may find it a more useful source of information.

OPTIONS

       The -H, -L and -P options control the treatment of symbolic links.  Command-line arguments
       following these are taken to be names of files or directories to be examined,  up  to  the
       first  argument  that  begins with `-', or the argument `(' or `!'.  That argument and any
       following arguments are taken to be the expression describing what is to be searched  for.
       If  no  paths  are  given,  the current directory is used.  If no expression is given, the
       expression -print is used  (but  you  should  probably  consider  using  -print0  instead,
       anyway).

       This  manual page talks about `options' within the expression list.  These options control
       the behaviour of find but are specified immediately after the last path  name.   The  five
       `real' options -H, -L, -P, -D and -O must appear before the first path name, if at all.  A
       double dash -- can also be used to signal that any remaining  arguments  are  not  options
       (though ensuring that all start points begin with either `./' or `/' is generally safer if
       you use wildcards in the list of start points).

       -P     Never follow symbolic links.  This is the default behaviour.  When find examines or
              prints  information  a  file, and the file is a symbolic link, the information used
              shall be taken from the properties of the symbolic link itself.

       -L     Follow symbolic links.  When find examines or prints information about  files,  the
              information  used  shall be taken from the properties of the file to which the link
              points, not from the link itself (unless it is a broken symbolic link  or  find  is
              unable  to  examine the file to which the link points).  Use of this option implies
              -noleaf.  If you later use the -P option, -noleaf will still be in effect.   If  -L
              is  in  effect  and  find  discovers  a  symbolic link to a subdirectory during its
              search, the subdirectory pointed to by the symbolic link will be searched.

              When the -L option is in effect, the -type predicate will always match against  the
              type of the file that a symbolic link points to rather than the link itself (unless
              the symbolic link is broken).  Actions that can  cause  symbolic  links  to  become
              broken  while  find  is  executing (for example -delete) can give rise to confusing
              behaviour.  Using -L causes the -lname and  -ilname  predicates  always  to  return
              false.

       -H     Do  not  follow symbolic links, except while processing the command line arguments.
              When find examines or prints information about files, the information used shall be
              taken  from the properties of the symbolic link itself.  The only exception to this
              behaviour is when a file specified on the command line is a symbolic link, and  the
              link  can  be  resolved.   For  that  situation, the information used is taken from
              whatever the link points to (that is, the link is followed).  The information about
              the  link  itself is used as a fallback if the file pointed to by the symbolic link
              cannot be examined.  If -H is in effect and one  of  the  paths  specified  on  the
              command line is a symbolic link to a directory, the contents of that directory will
              be examined (though of course -maxdepth 0 would prevent this).

       If more than one of -H, -L and -P is specified, each overrides the others;  the  last  one
       appearing on the command line takes effect.  Since it is the default, the -P option should
       be considered to be in effect unless either -H or -L is specified.

       GNU find frequently stats files during the processing of the command line  itself,  before
       any  searching  has  begun.   These options also affect how those arguments are processed.
       Specifically, there are a number of tests that compare files listed on  the  command  line
       against  a  file  we  are  currently considering.  In each case, the file specified on the
       command line will have been examined and some of its properties will have been saved.   If
       the  named  file is in fact a symbolic link, and the -P option is in effect (or if neither
       -H nor -L were specified), the information used for the comparison will be taken from  the
       properties  of  the symbolic link.  Otherwise, it will be taken from the properties of the
       file the link points to.  If find cannot follow the  link  (for  example  because  it  has
       insufficient  privileges  or  the link points to a nonexistent file) the properties of the
       link itself will be used.

       When the -H or -L options are in effect, any symbolic links  listed  as  the  argument  of
       -newer  will  be  dereferenced, and the timestamp will be taken from the file to which the
       symbolic link points.  The same consideration applies to -newerXY, -anewer and -cnewer.

       The -follow option has a similar effect to -L, though it takes effect at the  point  where
       it  appears (that is, if -L is not used but -follow is, any symbolic links appearing after
       -follow on the command line will be dereferenced, and those before it will not).

       -D debugopts
              Print diagnostic information; this can be helpful to  diagnose  problems  with  why
              find  is  not  doing  what  you  want.   The  list of debug options should be comma
              separated.  Compatibility of the debug options is not guaranteed  between  releases
              of  findutils.   For a complete list of valid debug options, see the output of find
              -D help.  Valid debug options include

              exec   Show diagnostic information relating to -exec, -execdir, -ok and -okdir

              opt    Prints diagnostic information relating to the optimisation of the expression
                     tree; see the -O option.

              rates  Prints a summary indicating how often each predicate succeeded or failed.

              search Navigate the directory tree verbosely.

              stat   Print  messages  as files are examined with the stat and lstat system calls.
                     The find program tries to minimise such calls.

              tree   Show the expression tree in its original and optimised form.

              all    Enable all of the other debug options (but help).

              help   Explain the debugging options.

       -Olevel
              Enables query optimisation.  The find program reorders tests to speed up  execution
              while  preserving the overall effect; that is, predicates with side effects are not
              reordered relative to each other.  The optimisations performed at each optimisation
              level are as follows.

              0      Equivalent to optimisation level 1.

              1      This  is  the  default optimisation level and corresponds to the traditional
                     behaviour.  Expressions are reordered so that tests based only on the  names
                     of files (for example -name and -regex) are performed first.

              2      Any  -type  or  -xtype tests are performed after any tests based only on the
                     names of files, but before any  tests  that  require  information  from  the
                     inode.   On  many  modern  versions  of  Unix,  file  types  are returned by
                     readdir() and so these predicates are faster  to  evaluate  than  predicates
                     which need to stat the file first.  If you use the -fstype FOO predicate and
                     specify a filesystem type FOO which  is  not  known  (that  is,  present  in
                     `/etc/mtab')  at  the  time  find  starts,  that  predicate is equivalent to
                     -false.

              3      At this optimisation level, the full cost-based query optimiser is  enabled.
                     The order of tests is modified so that cheap (i.e. fast) tests are performed
                     first and more expensive ones are performed  later,  if  necessary.   Within
                     each  cost  band,  predicates  are  evaluated  earlier or later according to
                     whether they are likely to succeed or not.  For  -o,  predicates  which  are
                     likely  to  succeed  are evaluated earlier, and for -a, predicates which are
                     likely to fail are evaluated earlier.

              The cost-based optimiser has a fixed idea of  how  likely  any  given  test  is  to
              succeed.  In some cases the probability takes account of the specific nature of the
              test (for example, -type f is assumed to be more likely to succeed than  -type  c).
              The  cost-based  optimiser  is  currently being evaluated.  If it does not actually
              improve  the  performance  of  find,  it  will  be  removed   again.    Conversely,
              optimisations  that  prove  to  be reliable, robust and effective may be enabled at
              lower  optimisation  levels  over  time.   However,  the  default  behaviour  (i.e.
              optimisation  level  1)  will  not  be  changed  in  the 4.3.x release series.  The
              findutils test suite runs all the tests on find  at  each  optimisation  level  and
              ensures that the result is the same.

EXPRESSION

       The part of the command line after the list of starting points is the expression.  This is
       a kind of query specification describing how we match files and what we do with the  files
       that were matched.  An expression is composed of a sequence of things:

       Tests  Tests return a true or false value, usually on the basis of some property of a file
              we are considering.  The -empty test for example is true only when the current file
              is empty.

       Actions
              Actions  have  side effects (such as printing something on the standard output) and
              return either true or false, usually based on whether or not they  are  successful.
              The  -print  action for example prints the name of the current file on the standard
              output.

       Global options
              Global options affect the operation of tests and actions specified on any  part  of
              the  command  line.   Global  options  always  return  true.  The -depth option for
              example makes find traverse the file system in a depth-first order.

       Positional options
              Positional options affect only tests or  actions  which  follow  them.   Positional
              options  always  return  true.   The  -regextype  option for example is positional,
              specifying the regular expression dialect for regular expressions  occurring  later
              on the command line.

       Operators
              Operators  join  together  the other items within the expression.  They include for
              example -o (meaning logical OR) and -a (meaning logical AND).  Where an operator is
              missing, -a is assumed.

       If  the  whole  expression  contains  no  actions  other  than -prune or -print, -print is
       performed on all files for which the whole expression is true.

       The -delete action also acts like an option (since it implies -depth).

   POSITIONAL OPTIONS
       Positional options always return true.  They affect only  tests  occurring  later  on  the
       command line.

       -daystart
              Measure  times  (for  -amin,  -atime,  -cmin,  -ctime,  -mmin, and -mtime) from the
              beginning of today rather than from 24 hours ago.  This option only  affects  tests
              which appear later on the command line.

       -follow
              Deprecated;  use  the  -L  option  instead.   Dereference  symbolic links.  Implies
              -noleaf.  The -follow option affects only those tests which appear after it on  the
              command  line.   Unless the -H or -L option has been specified, the position of the
              -follow option changes the behaviour of the -newer predicate; any files  listed  as
              the  argument  of -newer will be dereferenced if they are symbolic links.  The same
              consideration applies to -newerXY,  -anewer  and  -cnewer.   Similarly,  the  -type
              predicate  will  always  match  against  the  type of the file that a symbolic link
              points to rather than the link itself.  Using -follow causes the -lname and -ilname
              predicates always to return false.

       -regextype type
              Changes  the regular expression syntax understood by -regex and -iregex tests which
              occur later on the command line.  To see which regular expression types are  known,
              use -regextype help.  The Texinfo documentation (see SEE ALSO) explains the meaning
              of and differences between the various types of regular expression.

       -warn, -nowarn
              Turn warning messages on or off.  These warnings apply only  to  the  command  line
              usage,   not  to  any  conditions  that  find  might  encounter  when  it  searches
              directories.  The default behaviour corresponds to -warn if  standard  input  is  a
              tty, and to -nowarn otherwise.  If a warning message relating to command-line usage
              is produced, the exit status of find  is  not  affected.   If  the  POSIXLY_CORRECT
              environment  variable is set, and -warn is also used, it is not specified which, if
              any, warnings will be active.

   GLOBAL OPTIONS
       Global options always return true.  Global options take effect even for tests which  occur
       earlier on the command line.  To prevent confusion, global options should specified on the
       command-line after the list of start points, just before the first test, positional option
       or  action.  If you specify a global option in some other place, find will issue a warning
       message explaining that this can be confusing.

       The global options occur after the list of start points, and so are not the same  kind  of
       option as -L, for example.

       -d     A synonym for -depth, for compatibility with FreeBSD, NetBSD, MacOS X and OpenBSD.

       -depth Process  each directory's contents before the directory itself.  The -delete action
              also implies -depth.

       -help, --help
              Print a summary of the command-line usage of find and exit.

       -ignore_readdir_race
              Normally, find will emit an error message when it fails to stat  a  file.   If  you
              give  this option and a file is deleted between the time find reads the name of the
              file from the directory and the time it tries to stat the file,  no  error  message
              will be issued.  This also applies to files or directories whose names are given on
              the command line.  This option takes effect at the time the command line  is  read,
              which  means  that you cannot search one part of the filesystem with this option on
              and part of it with this option off (if you need to do that, you will need to issue
              two find commands instead, one with the option and one without it).

              Furthermore,  find  with  the -ignore_readdir_race option will ignore errors of the
              -delete action in the case the file has disappeared since the parent directory  was
              read:  it  will  not output an error diagnostic, and the return code of the -delete
              action will be true.

       -maxdepth levels
              Descend at most levels (a non-negative integer) levels  of  directories  below  the
              starting-points.   -maxdepth  0  means  only  apply  the  tests  and actions to the
              starting-points themselves.

       -mindepth levels
              Do not apply any tests or actions  at  levels  less  than  levels  (a  non-negative
              integer).  -mindepth 1 means process all files except the starting-points.

       -mount Don't  descend  directories on other filesystems.  An alternate name for -xdev, for
              compatibility with some other versions of find.

       -noignore_readdir_race
              Turns off the effect of -ignore_readdir_race.

       -noleaf
              Do not optimize by assuming that directories contain 2  fewer  subdirectories  than
              their  hard  link  count.  This option is needed when searching filesystems that do
              not follow the Unix directory-link convention, such as CD-ROM or MS-DOS filesystems
              or  AFS  volume  mount  points.   Each directory on a normal Unix filesystem has at
              least 2 hard links: its name and its `.' entry.  Additionally,  its  subdirectories
              (if any) each have a `..' entry linked to that directory.  When find is examining a
              directory, after it has statted 2 fewer subdirectories than  the  directory's  link
              count,  it  knows that the rest of the entries in the directory are non-directories
              (`leaf' files in the directory  tree).   If  only  the  files'  names  need  to  be
              examined,  there  is  no  need  to  stat them; this gives a significant increase in
              search speed.

       -version, --version
              Print the find version number and exit.

       -xdev  Don't descend directories on other filesystems.

   TESTS
       Some tests, for  example  -newerXY  and  -samefile,  allow  comparison  between  the  file
       currently  being  examined  and  some  reference file specified on the command line.  When
       these tests are used, the interpretation of  the  reference  file  is  determined  by  the
       options  -H,  -L  and -P and any previous -follow, but the reference file is only examined
       once, at the time the command line is parsed.  If the reference file  cannot  be  examined
       (for  example, the stat(2) system call fails for it), an error message is issued, and find
       exits with a nonzero status.

       Numeric arguments can be specified as

       +n     for greater than n,

       -n     for less than n,

       n      for exactly n.

       -amin n
              File was last accessed n minutes ago.

       -anewer file
              File was last accessed more recently than file was modified.  If file is a symbolic
              link  and  the -H option or the -L option is in effect, the access time of the file
              it points to is always used.

       -atime n
              File was last accessed n*24 hours ago.  When find  figures  out  how  many  24-hour
              periods ago the file was last accessed, any fractional part is ignored, so to match
              -atime +1, a file has to have been accessed at least two days ago.

       -cmin n
              File's status was last changed n minutes ago.

       -cnewer file
              File's status was last changed more recently than file was modified.  If file is  a
              symbolic  link  and  the -H option or the -L option is in effect, the status-change
              time of the file it points to is always used.

       -ctime n
              File's status was last changed n*24 hours ago.  See  the  comments  for  -atime  to
              understand how rounding affects the interpretation of file status change times.

       -empty File is empty and is either a regular file or a directory.

       -executable
              Matches  files which are executable and directories which are searchable (in a file
              name resolution sense) by the current user.  This takes into account access control
              lists  and  other  permissions  artefacts  which the -perm test ignores.  This test
              makes use of the access(2) system call, and so can be fooled by NFS  servers  which
              do  UID  mapping (or root-squashing), since many systems implement access(2) in the
              client's kernel and so cannot make use of the UID mapping information held  on  the
              server.   Because  this  test  is  based only on the result of the access(2) system
              call, there is no guarantee that a file for which this test succeeds  can  actually
              be executed.

       -false Always false.

       -fstype type
              File  is  on  a  filesystem  of  type  type.  The valid filesystem types vary among
              different versions of Unix;  an  incomplete  list  of  filesystem  types  that  are
              accepted on some version of Unix or another is: ufs, 4.2, 4.3, nfs, tmp, mfs, S51K,
              S52K.  You can use -printf  with  the  %F  directive  to  see  the  types  of  your
              filesystems.

       -gid n File's numeric group ID is n.

       -group gname
              File belongs to group gname (numeric group ID allowed).

       -ilname pattern
              Like  -lname,  but  the match is case insensitive.  If the -L option or the -follow
              option is in effect, this test returns false unless the symbolic link is broken.

       -iname pattern
              Like -name, but the match is case insensitive.  For example, the patterns `fo*' and
              `F??'  match  the  file names `Foo', `FOO', `foo', `fOo', etc.  The pattern `*foo*`
              will also match a file called '.foobar'.

       -inum n
              File has inode number n.  It is normally easier to use the -samefile test instead.

       -ipath pattern
              Like -path.  but the match is case insensitive.

       -iregex pattern
              Like -regex, but the match is case insensitive.

       -iwholename pattern
              See -ipath.  This alternative is less portable than -ipath.

       -links n
              File has n hard links.

       -lname pattern
              File  is  a  symbolic  link  whose  contents  match  shell  pattern  pattern.   The
              metacharacters  do not treat `/' or `.' specially.  If the -L option or the -follow
              option is in effect, this test returns false unless the symbolic link is broken.

       -mmin n
              File's data was last modified n minutes ago.

       -mtime n
              File's data was last modified n*24 hours ago.   See  the  comments  for  -atime  to
              understand how rounding affects the interpretation of file modification times.

       -name pattern
              Base  of  file  name  (the path with the leading directories removed) matches shell
              pattern pattern.  Because the leading  directories  are  removed,  the  file  names
              considered  for  a match with -name will never include a slash, so `-name a/b' will
              never match anything (you probably need to use -path instead).  A warning is issued
              if you try to do this, unless the environment variable POSIXLY_CORRECT is set.  The
              metacharacters (`*', `?', and `[]') match a `.' at the start of the base name (this
              is  a  change  in  findutils-4.2.2;  see  section STANDARDS CONFORMANCE below).  To
              ignore a directory and the files under it,  use  -prune;  see  an  example  in  the
              description of -path.  Braces are not recognised as being special, despite the fact
              that some shells including Bash imbue  braces  with  a  special  meaning  in  shell
              patterns.   The  filename  matching  is  performed  with  the use of the fnmatch(3)
              library function.  Don't forget to enclose  the  pattern  in  quotes  in  order  to
              protect it from expansion by the shell.

       -newer file
              File  was  modified more recently than file.  If file is a symbolic link and the -H
              option or the -L option is in effect, the modification time of the file  it  points
              to is always used.

       -newerXY reference
              Succeeds  if  timestamp X of the file being considered is newer than timestamp Y of
              the file reference.  The letters X and Y can be any of the following letters:

              a   The access time of the file reference
              B   The birth time of the file reference
              c   The inode status change time of reference
              m   The modification time of the file reference
              t   reference is interpreted directly as a time

              Some combinations are invalid; for example, it is invalid for  X  to  be  t.   Some
              combinations  are not implemented on all systems; for example B is not supported on
              all systems.  If an invalid or unsupported combination of XY is specified, a  fatal
              error  results.   Time specifications are interpreted as for the argument to the -d
              option of GNU date.  If you try to use the birth time of a reference file, and  the
              birth  time  cannot be determined, a fatal error message results.  If you specify a
              test which refers to the birth time of files being examined, this  test  will  fail
              for any files where the birth time is unknown.

       -nogroup
              No group corresponds to file's numeric group ID.

       -nouser
              No user corresponds to file's numeric user ID.

       -path pattern
              File  name  matches  shell pattern pattern.  The metacharacters do not treat `/' or
              `.' specially; so, for example,
                        find . -path "./sr*sc"
              will print an entry for a directory called `./src/misc' (if one exists).  To ignore
              a  whole  directory  tree,  use -prune rather than checking every file in the tree.
              For example, to skip the directory `src/emacs' and all files and directories  under
              it, and print the names of the other files found, do something like this:
                        find . -path ./src/emacs -prune -o -print
              Note  that the pattern match test applies to the whole file name, starting from one
              of the start points named on the command line.  It would only make sense to use  an
              absolute path name here if the relevant start point is also an absolute path.  This
              means that this command will never match anything:
                        find bar -path /foo/bar/myfile -print
              Find compares the -path argument with the concatenation of a directory name and the
              base  name of the file it's examining.  Since the concatenation will never end with
              a slash, -path arguments ending in a slash will match  nothing  (except  perhaps  a
              start  point specified on the command line).  The predicate -path is also supported
              by HP-UX find and is part of the POSIX 2008 standard.

       -perm mode
              File's permission bits are exactly mode (octal or symbolic).  Since an exact  match
              is  required,  if  you  want  to  use this form for symbolic modes, you may have to
              specify a rather complex mode string.  For example  `-perm  g=w'  will  only  match
              files  which  have mode 0020 (that is, ones for which group write permission is the
              only permission set).  It is more likely that you will want to use the `/'  or  `-'
              forms,  for  example  `-perm  -g=w',  which  matches  any  file  with  group  write
              permission.  See the EXAMPLES section for some illustrative examples.

       -perm -mode
              All of the permission bits mode are set for the file.  Symbolic modes are  accepted
              in this form, and this is usually the way in which you would want to use them.  You
              must specify `u', `g' or `o' if you use a symbolic mode.  See the EXAMPLES  section
              for some illustrative examples.

       -perm /mode
              Any  of the permission bits mode are set for the file.  Symbolic modes are accepted
              in this form.  You must specify `u', `g' or `o' if you use a  symbolic  mode.   See
              the EXAMPLES section for some illustrative examples.  If no permission bits in mode
              are set, this test matches any file (the idea here is to  be  consistent  with  the
              behaviour of -perm -000).

       -perm +mode
              This  is no longer supported (and has been deprecated since 2005).  Use -perm /mode
              instead.

       -readable
              Matches files which are readable by the current  user.   This  takes  into  account
              access  control lists and other permissions artefacts which the -perm test ignores.
              This test makes use of the access(2) system call, and  so  can  be  fooled  by  NFS
              servers  which  do  UID  mapping  (or root-squashing), since many systems implement
              access(2) in the client's kernel  and  so  cannot  make  use  of  the  UID  mapping
              information held on the server.

       -regex pattern
              File  name  matches regular expression pattern.  This is a match on the whole path,
              not a search.  For example, to match a file  named  `./fubar3',  you  can  use  the
              regular  expression `.*bar.' or `.*b.*3', but not `f.*r3'.  The regular expressions
              understood by find are by  default  Emacs  Regular  Expressions  (except  that  `.'
              matches newline), but this can be changed with the -regextype option.

       -samefile name
              File  refers  to  the  same  inode as name.  When -L is in effect, this can include
              symbolic links.

       -size n[cwbkMG]
              File uses n units of space, rounding up.  The following suffixes can be used:

              `b'    for 512-byte blocks (this is the default if no suffix is used)

              `c'    for bytes

              `w'    for two-byte words

              `k'    for kibibytes (KiB, units of 1024 bytes)

              `M'    for mebibytes (MiB, units of 1024 * 1024 = 1048576 bytes)

              `G'    for gibibytes (GiB, units of 1024 * 1024 * 1024 = 1073741824 bytes)

              The size is simply the st_size member of the struct stat populated by the lstat (or
              stat) system call, rounded up as shown above.  In other words, it's consistent with
              the result you get for ls  -l.   Bear  in  mind  that  the  `%k'  and  `%b'  format
              specifiers  of  -printf  handle  sparse  files  differently.  The `b' suffix always
              denotes 512-byte blocks and never 1024-byte  blocks,  which  is  different  to  the
              behaviour of -ls.

              The  +  and - prefixes signify greater than and less than, as usual; i.e., an exact
              size of n units does not match.  Bear in mind that the size is rounded  up  to  the
              next  unit.   Therefore -size -1M is not equivalent to -size -1048576c.  The former
              only matches empty files, the latter matches files from 0 to 1,048,575 bytes.

       -true  Always true.

       -type c
              File is of type c:

              b      block (buffered) special

              c      character (unbuffered) special

              d      directory

              p      named pipe (FIFO)

              f      regular file

              l      symbolic link; this is never true if the -L option or the -follow option  is
                     in  effect,  unless  the symbolic link is broken.  If you want to search for
                     symbolic links when -L is in effect, use -xtype.

              s      socket

              D      door (Solaris)

              To search for more than one type at once, you can supply the combined list of  type
              letters separated by a comma `,' (GNU extension).

       -uid n File's numeric user ID is n.

       -used n
              File was last accessed n days after its status was last changed.

       -user uname
              File is owned by user uname (numeric user ID allowed).

       -wholename pattern
              See -path.  This alternative is less portable than -path.

       -writable
              Matches  files  which  are  writable  by the current user.  This takes into account
              access control lists and other permissions artefacts which the -perm test  ignores.
              This  test  makes  use  of  the  access(2) system call, and so can be fooled by NFS
              servers which do UID mapping (or  root-squashing),  since  many  systems  implement
              access(2)  in  the  client's  kernel  and  so  cannot  make  use of the UID mapping
              information held on the server.

       -xtype c
              The same as -type unless the file is a symbolic link.  For symbolic links:  if  the
              -H  or  -P option was specified, true if the file is a link to a file of type c; if
              the -L option has been given, true if c is  `l'.   In  other  words,  for  symbolic
              links, -xtype checks the type of the file that -type does not check.

       -context pattern
              (SELinux only) Security context of the file matches glob pattern.

   ACTIONS
       -delete
              Delete  files;  true if removal succeeded.  If the removal failed, an error message
              is issued.  If  -delete  fails,  find's  exit  status  will  be  nonzero  (when  it
              eventually exits).  Use of -delete automatically turns on the `-depth' option.

              Warnings: Don't forget that the find command line is evaluated as an expression, so
              putting -delete first will make find try to delete everything  below  the  starting
              points  you  specified.   When testing a find command line that you later intend to
              use with -delete, you should explicitly specify -depth  in  order  to  avoid  later
              surprises.   Because  -delete  implies  -depth,  you cannot usefully use -prune and
              -delete together.

              Together with the -ignore_readdir_race option,  find  will  ignore  errors  of  the
              -delete  action in the case the file has disappeared since the parent directory was
              read: it will not output an error diagnostic, and the return code  of  the  -delete
              action will be true.

       -exec command ;
              Execute command; true if 0 status is returned.  All following arguments to find are
              taken to be arguments to the  command  until  an  argument  consisting  of  `;'  is
              encountered.   The string `{}' is replaced by the current file name being processed
              everywhere it occurs in the arguments to the command, not just in  arguments  where
              it  is  alone, as in some versions of find.  Both of these constructions might need
              to be escaped (with a `\') or quoted to protect them from expansion by  the  shell.
              See  the  EXAMPLES  section  for  examples  of  the  use  of the -exec option.  The
              specified command is run once for each matched file.  The command  is  executed  in
              the starting directory.  There are unavoidable security problems surrounding use of
              the -exec action; you should use the -execdir option instead.

       -exec command {} +
              This variant of the -exec action runs the specified command on the selected  files,
              but  the command line is built by appending each selected file name at the end; the
              total number of invocations of the command will be much less  than  the  number  of
              matched  files.   The  command line is built in much the same way that xargs builds
              its command lines.  Only one instance of `{}' is allowed within  the  command,  and
              (when  find  is being invoked from a shell) it should be quoted (for example, '{}')
              to protect it from interpretation by  shells.   The  command  is  executed  in  the
              starting  directory.   If any invocation with the `+' form returns a non-zero value
              as exit status, then find returns a non-zero exit status.  If  find  encounters  an
              error, this can sometimes cause an immediate exit, so some pending commands may not
              be run at all.  This variant of -exec always returns true.

       -execdir command ;

       -execdir command {} +
              Like -exec, but the specified command is run from the subdirectory  containing  the
              matched  file,  which  is not normally the directory in which you started find.  As
              with -exec, the {} should be quoted if find is being invoked from a shell.  This  a
              much  more secure method for invoking commands, as it avoids race conditions during
              resolution of the paths to the matched files.  As with the -exec  action,  the  `+'
              form  of  -execdir will build a command line to process more than one matched file,
              but any given invocation of command will only list files that  exist  in  the  same
              subdirectory.   If you use this option, you must ensure that your $PATH environment
              variable does not reference `.'; otherwise, an attacker can run any  commands  they
              like  by  leaving  an appropriately-named file in a directory in which you will run
              -execdir.  The same applies to having entries in $PATH which are empty or which are
              not  absolute  directory names.  If any invocation with the `+' form returns a non-
              zero value as exit status, then find returns  a  non-zero  exit  status.   If  find
              encounters  an  error,  this can sometimes cause an immediate exit, so some pending
              commands may not be run at all.  The result of the action depends on whether the  +
              or  the  ;  variant is being used; -execdir command {} + always returns true, while
              -execdir command {} ; returns true only if command returns 0.

       -fls file
              True; like -ls but write to file like -fprint.  The output file is always  created,
              even  if  the  predicate  is  never matched.  See the UNUSUAL FILENAMES section for
              information about how unusual characters in filenames are handled.

       -fprint file
              True; print the full file name into file file.  If file does not exist when find is
              run,  it  is  created;  if  it  does  exist,  it  is  truncated.   The  file  names
              `/dev/stdout' and `/dev/stderr' are handled specially; they refer to  the  standard
              output and standard error output, respectively.  The output file is always created,
              even if the predicate is never matched.  See  the  UNUSUAL  FILENAMES  section  for
              information about how unusual characters in filenames are handled.

       -fprint0 file
              True;  like  -print0  but  write  to  file like -fprint.  The output file is always
              created, even if the predicate is never matched.  See the UNUSUAL FILENAMES section
              for information about how unusual characters in filenames are handled.

       -fprintf file format
              True;  like  -printf  but  write  to  file like -fprint.  The output file is always
              created, even if the predicate is never matched.  See the UNUSUAL FILENAMES section
              for information about how unusual characters in filenames are handled.

       -ls    True;  list  current  file in ls -dils format on standard output.  The block counts
              are of 1 KB blocks, unless the environment  variable  POSIXLY_CORRECT  is  set,  in
              which  case  512-byte  blocks  are  used.   See  the  UNUSUAL FILENAMES section for
              information about how unusual characters in filenames are handled.

       -ok command ;
              Like -exec but ask the user first.  If the user agrees, run the command.  Otherwise
              just  return  false.   If the command is run, its standard input is redirected from
              /dev/null.

              The response to the prompt is matched against a  pair  of  regular  expressions  to
              determine if it is an affirmative or negative response.  This regular expression is
              obtained from the system if the `POSIXLY_CORRECT' environment variable is  set,  or
              otherwise  from  find's  message  translations.   If  the  system  has  no suitable
              definition, find's own definition will be used.  In either case, the interpretation
              of  the  regular  expression  itself  will be affected by the environment variables
              'LC_CTYPE' (character classes) and 'LC_COLLATE' (character ranges  and  equivalence
              classes).

       -okdir command ;
              Like  -execdir but ask the user first in the same way as for -ok.  If the user does
              not agree, just return false.  If  the  command  is  run,  its  standard  input  is
              redirected from /dev/null.

       -print True;  print  the full file name on the standard output, followed by a newline.  If
              you are piping the output of find into another program and there  is  the  faintest
              possibility  that  the  files  which you are searching for might contain a newline,
              then you should seriously consider using the -print0 option instead of -print.  See
              the  UNUSUAL  FILENAMES  section  for  information  about how unusual characters in
              filenames are handled.

       -print0
              True; print the full file name on the standard output, followed by a null character
              (instead  of  the newline character that -print uses).  This allows file names that
              contain newlines or other types of white  space  to  be  correctly  interpreted  by
              programs that process the find output.  This option corresponds to the -0 option of
              xargs.

       -printf format
              True; print format on  the  standard  output,  interpreting  `\'  escapes  and  `%'
              directives.   Field  widths  and precisions can be specified as with the `printf' C
              function.  Please note that many of the fields are printed as %s  rather  than  %d,
              and  this may mean that flags don't work as you might expect.  This also means that
              the `-' flag does work (it forces  fields  to  be  left-aligned).   Unlike  -print,
              -printf  does  not  add  a  newline  at  the  end  of  the string.  The escapes and
              directives are:

              \a     Alarm bell.

              \b     Backspace.

              \c     Stop printing from this format immediately and flush the output.

              \f     Form feed.

              \n     Newline.

              \r     Carriage return.

              \t     Horizontal tab.

              \v     Vertical tab.

              \0     ASCII NUL.

              \\     A literal backslash (`\').

              \NNN   The character whose ASCII code is NNN (octal).

              A `\' character  followed  by  any  other  character  is  treated  as  an  ordinary
              character, so they both are printed.

              %%     A literal percent sign.

              %a     File's last access time in the format returned by the C `ctime' function.

              %Ak    File's last access time in the format specified by k, which is either `@' or
                     a directive for the C `strftime' function.  The possible values  for  k  are
                     listed  below;  some  of  them might not be available on all systems, due to
                     differences in `strftime' between systems.

                     @      seconds since Jan. 1, 1970, 00:00 GMT, with fractional part.

                     Time fields:

                     H      hour (00..23)

                     I      hour (01..12)

                     k      hour ( 0..23)

                     l      hour ( 1..12)

                     M      minute (00..59)

                     p      locale's AM or PM

                     r      time, 12-hour (hh:mm:ss [AP]M)

                     S      Second (00.00 .. 61.00).  There is a fractional part.

                     T      time, 24-hour (hh:mm:ss.xxxxxxxxxx)

                     +      Date and time, separated by `+', for example `2004-04-28+22:22:05.0'.
                            This  is  a GNU extension.  The time is given in the current timezone
                            (which may be affected by setting the TZ environment variable).   The
                            seconds field includes a fractional part.

                     X      locale's  time  representation (H:M:S).  The seconds field includes a
                            fractional part.

                     Z      time zone (e.g., EDT), or nothing if no time zone is determinable

                     Date fields:

                     a      locale's abbreviated weekday name (Sun..Sat)

                     A      locale's full weekday name, variable length (Sunday..Saturday)

                     b      locale's abbreviated month name (Jan..Dec)

                     B      locale's full month name, variable length (January..December)

                     c      locale's date and time (Sat Nov 04 12:02:33 EST 1989).  The format is
                            the  same  as for ctime(3) and so to preserve compatibility with that
                            format, there is no fractional part in the seconds field.

                     d      day of month (01..31)

                     D      date (mm/dd/yy)

                     h      same as b

                     j      day of year (001..366)

                     m      month (01..12)

                     U      week number of year with Sunday as first day of week (00..53)

                     w      day of week (0..6)

                     W      week number of year with Monday as first day of week (00..53)

                     x      locale's date representation (mm/dd/yy)

                     y      last two digits of year (00..99)

                     Y      year (1970...)

              %b     The amount of disk space used for this file in 512-byte blocks.  Since  disk
                     space is allocated in multiples of the filesystem block size this is usually
                     greater than %s/512, but it can also be smaller if  the  file  is  a  sparse
                     file.

              %c     File's  last  status  change  time  in  the format returned by the C `ctime'
                     function.

              %Ck    File's last status change time in the format specified by k,  which  is  the
                     same as for %A.

              %d     File's depth in the directory tree; 0 means the file is a starting-point.

              %D     The  device  number  on  which  the  file exists (the st_dev field of struct
                     stat), in decimal.

              %f     File's name with any leading directories removed (only the last element).

              %F     Type of the filesystem the file is on; this value can be used for -fstype.

              %g     File's group name, or numeric group ID if the group has no name.

              %G     File's numeric group ID.

              %h     Leading directories of file's name (all but the last element).  If the  file
                     name  contains  no  slashes  (since  it  is in the current directory) the %h
                     specifier expands to `.'.

              %H     Starting-point under which file was found.

              %i     File's inode number (in decimal).

              %k     The amount of disk space used for this file  in  1 KB  blocks.   Since  disk
                     space is allocated in multiples of the filesystem block size this is usually
                     greater than %s/1024, but it can also be smaller if the  file  is  a  sparse
                     file.

              %l     Object of symbolic link (empty string if file is not a symbolic link).

              %m     File's  permission  bits  (in  octal).   This  option uses the `traditional'
                     numbers  which  most  Unix  implementations  use,  but  if  your  particular
                     implementation  uses an unusual ordering of octal permissions bits, you will
                     see a difference between the actual value of the file's mode and the  output
                     of %m.  Normally you will want to have a leading zero on this number, and to
                     do this, you should use the # flag (as in, for example, `%#m').

              %M     File's permissions (in  symbolic  form,  as  for  ls).   This  directive  is
                     supported in findutils 4.2.5 and later.

              %n     Number of hard links to file.

              %p     File's name.

              %P     File's  name  with  the  name of the starting-point under which it was found
                     removed.

              %s     File's size in bytes.

              %S     File's sparseness.  This is calculated as (BLOCKSIZE*st_blocks  /  st_size).
                     The  exact  value  you  will get for an ordinary file of a certain length is
                     system-dependent.  However, normally sparse files will have values less than
                     1.0,  and  files which use indirect blocks may have a value which is greater
                     than 1.0.  In general the number of blocks used by a  file  is  file  system
                     dependent.  The value used for BLOCKSIZE is system-dependent, but is usually
                     512 bytes.  If the file size is zero, the value printed  is  undefined.   On
                     systems  which lack support for st_blocks, a file's sparseness is assumed to
                     be 1.0.

              %t     File's last modification time in  the  format  returned  by  the  C  `ctime'
                     function.

              %Tk    File's  last  modification  time  in the format specified by k, which is the
                     same as for %A.

              %u     File's user name, or numeric user ID if the user has no name.

              %U     File's numeric user ID.

              %y     File's type (like in ls -l), U=unknown type (shouldn't happen)

              %Y     File's type (like %y), plus follow symlinks: `L'=loop, `N'=nonexistent,  `?'
                     for any other error when determining the type of the symlink target.

              %Z     (SELinux only) file's security context.

              %{ %[ %(
                     Reserved for future use.

              A  `%'  character  followed  by  any  other  character  is discarded, but the other
              character is printed (don't rely on this,  as  further  format  characters  may  be
              introduced).   A  `%'  at the end of the format argument causes undefined behaviour
              since there is no following character.  In some locales,  it  may  hide  your  door
              keys, while in others it may remove the final page from the novel you are reading.

              The %m and %d directives support the # , 0 and + flags, but the other directives do
              not, even if they print numbers.  Numeric directives  that  do  not  support  these
              flags  include  G,  U, b, D, k and n.  The `-' format flag is supported and changes
              the alignment of a field from right-justified  (which  is  the  default)  to  left-
              justified.

              See  the  UNUSUAL FILENAMES section for information about how unusual characters in
              filenames are handled.

       -prune True; if the file is a directory, do not descend into  it.   If  -depth  is  given,
              false;  no  effect.  Because -delete implies -depth, you cannot usefully use -prune
              and -delete together.

       -quit  Exit immediately.  No child processes will be  left  running,  but  no  more  paths
              specified  on  the  command  line  will  be  processed.  For example, find /tmp/foo
              /tmp/bar -print -quit will print only /tmp/foo.  Any command lines which have  been
              built up with -execdir ... {} + will be invoked before find exits.  The exit status
              may or may not be zero, depending on whether an error has already occurred.

   OPERATORS
       Listed in order of decreasing precedence:

       ( expr )
              Force precedence.  Since parentheses are special to the shell,  you  will  normally
              need  to  quote them.  Many of the examples in this manual page use backslashes for
              this purpose: `\(...\)' instead of `(...)'.

       ! expr True if expr is false.  This character  will  also  usually  need  protection  from
              interpretation by the shell.

       -not expr
              Same as ! expr, but not POSIX compliant.

       expr1 expr2
              Two  expressions  in  a row are taken to be joined with an implied -a; expr2 is not
              evaluated if expr1 is false.

       expr1 -a expr2
              Same as expr1 expr2.

       expr1 -and expr2
              Same as expr1 expr2, but not POSIX compliant.

       expr1 -o expr2
              Or; expr2 is not evaluated if expr1 is true.

       expr1 -or expr2
              Same as expr1 -o expr2, but not POSIX compliant.

       expr1 , expr2
              List; both expr1 and expr2 are always evaluated.  The value of expr1 is  discarded;
              the  value of the list is the value of expr2.  The comma operator can be useful for
              searching for several different types  of  thing,  but  traversing  the  filesystem
              hierarchy  only  once.  The -fprintf action can be used to list the various matched
              items into several different output files.

       Please note that -a when specified implicitly (for example by two tests appearing  without
       an  explicit  operator  between  them)  or explicitly has higher precedence than -o.  This
       means that find . -name afile -o -name bfile -print will never print afile.

UNUSUAL FILENAMES

       Many of the actions of find result in the printing of data which is under the  control  of
       other  users.   This  includes  file  names, sizes, modification times and so forth.  File
       names are a potential problem since they can contain any character except  `\0'  and  `/'.
       Unusual  characters  in  file names can do unexpected and often undesirable things to your
       terminal (for example, changing the settings of your function  keys  on  some  terminals).
       Unusual characters are handled differently by various actions, as described below.

       -print0, -fprint0
              Always  print  the  exact  filename,  unchanged,  even  if the output is going to a
              terminal.

       -ls, -fls
              Unusual characters are always escaped.  White space, backslash,  and  double  quote
              characters  are  printed  using  C-style  escaping (for example `\f', `\"').  Other
              unusual characters are printed using an octal escape.  Other  printable  characters
              (for  -ls and -fls these are the characters between octal 041 and 0176) are printed
              as-is.

       -printf, -fprintf
              If the output is not going to a terminal, it  is  printed  as-is.   Otherwise,  the
              result  depends  on  which directive is in use.  The directives %D, %F, %g, %G, %H,
              %Y, and %y expand to values which are not under control of files'  owners,  and  so
              are  printed  as-is.  The directives %a, %b, %c, %d, %i, %k, %m, %M, %n, %s, %t, %u
              and %U have values which are under the control of files' owners but which cannot be
              used  to  send arbitrary data to the terminal, and so these are printed as-is.  The
              directives %f, %h, %l, %p and %P are quoted.  This quoting is performed in the same
              way  as for GNU ls.  This is not the same quoting mechanism as the one used for -ls
              and -fls.  If you are able to decide what format to use for the output of find then
              it  is  normally  better  to  use `\0' as a terminator than to use newline, as file
              names can  contain  white  space  and  newline  characters.   The  setting  of  the
              `LC_CTYPE'  environment  variable  is used to determine which characters need to be
              quoted.

       -print, -fprint
              Quoting is handled in the same way as for -printf and -fprintf.  If you  are  using
              find  in  a  script  or in a situation where the matched files might have arbitrary
              names, you should consider using -print0 instead of -print.

       The -ok and -okdir actions print the current filename as-is.  This may change in a  future
       release.

STANDARDS CONFORMANCE

       For  closest  compliance  to  the  POSIX  standard,  you  should  set  the POSIXLY_CORRECT
       environment variable.  The following options are specified in the POSIX standard (IEEE Std
       1003.1-2008, 2016 Edition):

       -H     This option is supported.

       -L     This option is supported.

       -name  This option is supported, but POSIX conformance depends on the POSIX conformance of
              the  system's  fnmatch(3)  library  function.    As   of   findutils-4.2.2,   shell
              metacharacters  (`*',  `?'  or  `[]' for example) will match a leading `.', because
              IEEE PASC interpretation 126  requires  this.   This  is  a  change  from  previous
              versions of findutils.

       -type  Supported.   POSIX  specifies  `b', `c', `d', `l', `p', `f' and `s'.  GNU find also
              supports `D', representing a Door, where the OS provides these.   Furthermore,  GNU
              find allows multiple types to be specified at once in a comma-separated list.

       -ok    Supported.   Interpretation  of  the  response  is  according to the `yes' and `no'
              patterns selected by setting the  `LC_MESSAGES'  environment  variable.   When  the
              `POSIXLY_CORRECT'  environment  variable  is set, these patterns are taken system's
              definition of a positive  (yes)  or  negative  (no)  response.   See  the  system's
              documentation   for   nl_langinfo(3),  in  particular  YESEXPR  and  NOEXPR.   When
              `POSIXLY_CORRECT' is not set, the  patterns  are  instead  taken  from  find's  own
              message catalogue.

       -newer Supported.   If  the  file specified is a symbolic link, it is always dereferenced.
              This is a change from previous behaviour, which used to take the relevant time from
              the symbolic link; see the HISTORY section below.

       -perm  Supported.   If  the  POSIXLY_CORRECT  environment  variable  is not set, some mode
              arguments (for example +a+x) which  are  not  valid  in  POSIX  are  supported  for
              backward-compatibility.

       Other primaries
              The  primaries  -atime,  -ctime,  -depth,  -exec, -group, -links, -mtime, -nogroup,
              -nouser, -ok, -path, -print, -prune, -size, -user and -xdev are all supported.

       The POSIX standard specifies parentheses `(', `)', negation `!' and  the  `and'  and  `or'
       operators ( -a, -o).

       All  other  options,  predicates, expressions and so forth are extensions beyond the POSIX
       standard.  Many of these extensions are not unique to GNU find, however.

       The POSIX standard requires that find detects loops:

              The find utility shall detect  infinite  loops;  that  is,  entering  a  previously
              visited  directory  that  is  an  ancestor  of  the last file encountered.  When it
              detects an infinite loop, find shall write a diagnostic message to  standard  error
              and shall either recover its position in the hierarchy or terminate.

       GNU  find  complies  with these requirements.  The link count of directories which contain
       entries which are hard links to an ancestor will often be lower than they otherwise should
       be.   This  can  mean  that  GNU  find  will  sometimes  optimise  away  the visiting of a
       subdirectory which is actually a link to an ancestor.  Since find does not actually  enter
       such  a subdirectory, it is allowed to avoid emitting a diagnostic message.  Although this
       behaviour may be somewhat confusing, it is unlikely that anybody actually depends on  this
       behaviour.  If the leaf optimisation has been turned off with -noleaf, the directory entry
       will always be examined and the diagnostic message will be issued where it is appropriate.
       Symbolic links cannot be used to create filesystem cycles as such, but if the -L option or
       the -follow option is in use, a diagnostic message is issued when find encounters  a  loop
       of  symbolic links.  As with loops containing hard links, the leaf optimisation will often
       mean that find knows that it doesn't need to call stat() or chdir() on the symbolic  link,
       so this diagnostic is frequently not necessary.

       The  -d option is supported for compatibility with various BSD systems, but you should use
       the POSIX-compliant option -depth instead.

       The POSIXLY_CORRECT environment variable does not affect the behaviour of  the  -regex  or
       -iregex tests because those tests aren't specified in the POSIX standard.

ENVIRONMENT VARIABLES

       LANG   Provides  a  default value for the internationalization variables that are unset or
              null.

       LC_ALL If set to  a  non-empty  string  value,  override  the  values  of  all  the  other
              internationalization variables.

       LC_COLLATE
              The  POSIX standard specifies that this variable affects the pattern matching to be
              used for the -name option.  GNU find uses the fnmatch(3) library function,  and  so
              support for `LC_COLLATE' depends on the system library.  This variable also affects
              the interpretation of the response to -ok; while the `LC_MESSAGES' variable selects
              the actual pattern used to interpret the response to -ok, the interpretation of any
              bracket expressions in the pattern will be affected by `LC_COLLATE'.

       LC_CTYPE
              This  variable  affects  the  treatment  of  character  classes  used  in   regular
              expressions  and  also  with  the  -name  test,  if the system's fnmatch(3) library
              function supports this.  This variable  also  affects  the  interpretation  of  any
              character  classes in the regular expressions used to interpret the response to the
              prompt issued by -ok.  The `LC_CTYPE' environment variable will also  affect  which
              characters  are  considered  to  be unprintable when filenames are printed; see the
              section UNUSUAL FILENAMES.

       LC_MESSAGES
              Determines  the  locale  to  be  used  for  internationalised  messages.   If   the
              `POSIXLY_CORRECT'   environment   variable   is   set,  this  also  determines  the
              interpretation of the response to the prompt made by the -ok action.

       NLSPATH
              Determines the location of the internationalisation message catalogues.

       PATH   Affects the directories which are searched  to  find  the  executables  invoked  by
              -exec, -execdir, -ok and -okdir.

       POSIXLY_CORRECT
              Determines  the block size used by -ls and -fls.  If POSIXLY_CORRECT is set, blocks
              are units of 512 bytes.  Otherwise they are units of 1024 bytes.

              Setting this variable also turns off warning messages (that is, implies -nowarn) by
              default,  because  POSIX  requires that apart from the output for -ok, all messages
              printed on stderr are diagnostics and must result in a non-zero exit status.

              When POSIXLY_CORRECT is not set, -perm +zzz is treated just like -perm /zzz if +zzz
              is  not  a  valid  symbolic mode.  When POSIXLY_CORRECT is set, such constructs are
              treated as an error.

              When POSIXLY_CORRECT is set, the response to the prompt made by the -ok  action  is
              interpreted according to the system's message catalogue, as opposed to according to
              find's own message translations.

       TZ     Affects the time zone used for  some  of  the  time-related  format  directives  of
              -printf and -fprintf.

EXAMPLES

       find /tmp -name core -type f -print | xargs /bin/rm -f

       Find files named core in or below the directory /tmp and delete them.  Note that this will
       work incorrectly if there are any filenames containing newlines, single or double  quotes,
       or spaces.

       find /tmp -name core -type f -print0 | xargs -0 /bin/rm -f

       Find files named core in or below the directory /tmp and delete them, processing filenames
       in such a way that file or directory names containing single or double quotes,  spaces  or
       newlines  are  correctly  handled.  The -name test comes before the -type test in order to
       avoid having to call stat(2) on every file.

       find . -type f -exec file '{}' \;

       Runs `file' on every file in or below the current directory.  Notice that the  braces  are
       enclosed  in  single  quote  marks  to  protect  them  from interpretation as shell script
       punctuation.  The semicolon is similarly protected by  the  use  of  a  backslash,  though
       single quotes could have been used in that case also.

       find / \( -perm -4000 -fprintf /root/suid.txt '%#m %u %p\n' \) , \
       \( -size +100M -fprintf /root/big.txt '%-10s %p\n' \)

       Traverse   the   filesystem   just   once,  listing  setuid  files  and  directories  into
       /root/suid.txt and large files into /root/big.txt.

       find $HOME -mtime 0

       Search for files in your home directory which have been modified in the  last  twenty-four
       hours.   This command works this way because the time since each file was last modified is
       divided by 24 hours and any remainder is discarded.  That means that to match -mtime 0,  a
       file will have to have a modification in the past which is less than 24 hours ago.

       find /sbin /usr/sbin -executable \! -readable -print

       Search for files which are executable but not readable.

       find . -perm 664

       Search  for  files  which  have  read and write permission for their owner, and group, but
       which other users can read but not write to.  Files which meet  these  criteria  but  have
       other  permissions  bits  set  (for  example  if someone can execute the file) will not be
       matched.

       find . -perm -664

       Search for files which have read and write permission for their owner and group, and which
       other  users  can  read,  without regard to the presence of any extra permission bits (for
       example the executable bit).  This will match a file which has mode 0777, for example.

       find . -perm /222

       Search for files which are writable by somebody (their owner, or their group,  or  anybody
       else).

       find . -perm /220
       find . -perm /u+w,g+w
       find . -perm /u=w,g=w

       All  three  of  these  commands  do  the  same  thing,  but  the  first one uses the octal
       representation of the file mode, and the other two use the symbolic form.  These  commands
       all  search  for files which are writable by either their owner or their group.  The files
       don't have to be writable by both the owner and group to be matched; either will do.

       find . -perm -220
       find . -perm -g+w,u+w

       Both these commands do the same thing; search for files which are writable by  both  their
       owner and their group.

       find . -perm -444 -perm /222 \! -perm /111
       find . -perm -a+r -perm /a+w \! -perm /a+x

       These  two  commands both search for files that are readable for everybody ( -perm -444 or
       -perm -a+r), have at least one write bit set ( -perm /222  or  -perm  /a+w)  but  are  not
       executable for anybody ( ! -perm /111 and ! -perm /a+x respectively).

       cd /source-dir
       find . -name .snapshot -prune -o \( \! -name '*~' -print0 \)|
       cpio -pmd0 /dest-dir

       This  command  copies  the  contents  of  /source-dir  to  /dest-dir,  but omits files and
       directories named .snapshot (and anything in them).  It also omits  files  or  directories
       whose  name  ends in ~, but not their contents.  The construct -prune -o \( ... -print0 \)
       is quite common.  The idea here is that the expression before -prune matches things  which
       are  to  be  pruned.   However, the -prune action itself returns true, so the following -o
       ensures that the right hand side is evaluated only for those directories which didn't  get
       pruned (the contents of the pruned directories are not even visited, so their contents are
       irrelevant).  The expression on the right hand side of the -o is in parentheses  only  for
       clarity.   It  emphasises  that the -print0 action takes place only for things that didn't
       have -prune applied to them.  Because the default `and' condition between tests binds more
       tightly  than  -o,  this  is  the default anyway, but the parentheses help to show what is
       going on.

       find repo/ \( -exec test -d '{}'/.svn \; -or \
       -exec test -d {}/.git \; -or -exec test -d {}/CVS \; \) \
       -print -prune

       Given the  following  directory  of  projects  and  their  associated  SCM  administrative
       directories, perform an efficient search for the projects' roots:

       repo/project1/CVS
       repo/gnu/project2/.svn
       repo/gnu/project3/.svn
       repo/gnu/project3/src/.svn
       repo/project4/.git

       In  this  example,  -prune prevents unnecessary descent into directories that have already
       been discovered (for example we do  not  search  project3/src  because  we  already  found
       project3/.svn), but ensures sibling directories (project2 and project3) are found.

       find /tmp -type f,d,l

       Search  for  files,  directories,  and  symbolic links in the directory /tmp passing these
       types as a comma-separated list (GNU extension), which  is  otherwise  equivalent  to  the
       longer, yet more portable:

       find /tmp \( -type f -o -type d -o -type l \)

EXIT STATUS

       find exits with status 0 if all files are processed successfully, greater than 0 if errors
       occur.  This is deliberately a very broad description, but if the  return  value  is  non-
       zero, you should not rely on the correctness of the results of find.

       When  some  error  occurs,  find  may stop immediately, without completing all the actions
       specified.  For example, some starting points may not have been examined or  some  pending
       program invocations for -exec ... {} + or -execdir ... {} + may not have been performed.

SEE ALSO

       locate(1),  locatedb(5),  updatedb(1),  xargs(1), chmod(1), fnmatch(3), regex(7), stat(2),
       lstat(2), ls(1), printf(3), strftime(3), ctime(3)

       The full documentation for find is maintained as a Texinfo manual.  If the info  and  find
       programs are properly installed at your site, the command info find should give you access
       to the complete manual.

HISTORY

       As of findutils-4.2.2, shell metacharacters  (`*',  `?'  or  `[]'  for  example)  used  in
       filename patterns will match a leading `.', because IEEE POSIX interpretation 126 requires
       this.

       As of findutils-4.3.3, -perm /000 now matches all files instead of none.

       Nanosecond-resolution timestamps were implemented in findutils-4.3.3.

       As of findutils-4.3.11, the -delete action sets find's exit status to a nonzero value when
       it  fails.   However,  find will not exit immediately.  Previously, find's exit status was
       unaffected by the failure of -delete.

       Feature                Added in   Also occurs in
       -newerXY               4.3.3      BSD
       -D                     4.3.1
       -O                     4.3.1
       -readable              4.3.0
       -writable              4.3.0
       -executable            4.3.0
       -regextype             4.2.24
       -exec ... +            4.2.12     POSIX
       -execdir               4.2.12     BSD
       -okdir                 4.2.12
       -samefile              4.2.11
       -H                     4.2.5      POSIX
       -L                     4.2.5      POSIX
       -P                     4.2.5      BSD
       -delete                4.2.3
       -quit                  4.2.3
       -d                     4.2.3      BSD
       -wholename             4.2.0
       -iwholename            4.2.0
       -ignore_readdir_race   4.2.0
       -fls                   4.0
       -ilname                3.8
       -iname                 3.8
       -ipath                 3.8
       -iregex                3.8

       The syntax -perm +MODE was removed in findutils-4.5.12, in favour  of  -perm  /MODE.   The
       +MODE syntax had been deprecated since findutils-4.2.21 which was released in 2005.

NON-BUGS

   Operator precedence surprises
       The  command  find . -name afile -o -name bfile -print will never print afile because this
       is actually equivalent to find . -name afile -o \( -name bfile  -a  -print  \).   Remember
       that  the  precedence  of  -a  is  higher  than  that  of -o and when there is no operator
       specified between tests, -a is assumed.

   “paths must precede expression” error message
       $ find . -name *.c -print
       find: paths must precede expression
       find: possible unquoted pattern after predicate `-name'?

       This happens when the shell could expand the pattern  *.c  to  more  than  one  file  name
       existing  in  the  current  directory, and passing the resulting file names in the command
       line to find like this:
       find . -name frcode.c locate.c word_io.c -print
       That command is of course not going to work, because the -name  predicate  allows  exactly
       only  one  pattern  as argument.  Instead of doing things this way, you should enclose the
       pattern in quotes or escape the wildcard, thus allowing find to use the pattern  with  the
       wildcard  during  the  search for file name matching instead of file names expanded by the
       parent shell:
       $ find . -name '*.c' -print
       $ find . -name \*.c -print

COPYRIGHT

       Copyright © 1990-2019 Free Software Foundation, Inc.  License GPLv3+: GNU GPL version 3 or
       later <https://gnu.org/licenses/gpl.html>.
       This  is free software: you are free to change and redistribute it.  There is NO WARRANTY,
       to the extent permitted by law.

BUGS

       There are security problems inherent in the behaviour that the  POSIX  standard  specifies
       for  find,  which  therefore cannot be fixed.  For example, the -exec action is inherently
       insecure, and -execdir should  be  used  instead.   Please  see  Finding  Files  for  more
       information.

       The environment variable LC_COLLATE has no effect on the -ok action.

       The     best     way     to     report    a    bug    is    to    use    the    form    at
       https://savannah.gnu.org/bugs/?group=findutils.  The reason for this is that you will then
       be  able  to track progress in fixing the problem.  Other comments about find(1) and about
       the findutils package in general can be sent to the bug-findutils mailing list.   To  join
       the list, send email to bug-findutils-request@gnu.org.

                                                                                          FIND(1)