Provided by: pegasus-wms_4.4.0+dfsg-8_amd64
pegasus-tc-client - A full featured generic client to handle adds, deletes and queries to the Transformation Catalog (TC).
pegasus-tc-client [-Dproperty=value...] [-h] [-v] [-V] OPERATION TRIGGERS [OPTIONS]
The pegasus-tc-client command is a generic client that performs the three basic operation of adding, deleting and querying of any Transformation Catalog implemented to the TC API. The client implements all the operations supported by the TC API. It is up to the TC implementation whether they support all operations or modes. The following 3 operations are supported by the pegasus-tc-client. One of these operations have to be specified to run the client. ADD This operation allows the client to add or update entries in the Transformation Catalog. Entries can be added one by one on the command line or in bulk by using the BULK Trigger and providing a file with the necessary entries. Also Profiles can be added to either the logical transformation or the physical transformation. DELETE This operation allows the client to delete entries from the Transformation Catalog. Entries can be deleted based on logical transformation, by resource, by transformation type as well as the transformation system information. Also Profiles associated with the logical or physical transformation can be deleted. QUERY This operation allows the client to query for entries from the Transformation Catalog. Queries can be made for printing all the contents of the Catalog or for specific entries, for all the logical transformations or resources etc. See the TRIGGERS and VALID COMBINATIONS section for more details.
To select one of the 3 operations. -a, --add Perform addition operations on the TC. -d, --delete Perform delete operations on the TC. -q, --query Perform query operations on the TC.
Triggers modify the behavior of an OPERATION. For example, if you want to perform a bulk operation you would use a BULK Trigger or if you want to perform an operation on a Logical Transformation then you would use the LFN Trigger. The following 7 Triggers are available. See the VALID COMBINATIONS section for the correct grouping and usage. -B Triggers a bulk operation. -L Triggers an operation on a logical transformation. -P Triggers an operation on a physical transformation -R Triggers an operation on a resource. -E Triggers an operation on a Profile. -T Triggers an operation on a Type. -S Triggers an operation on a System information.
The following options are applicable for all the operations. -Dproperty=value The -D options allows an experienced user to override certain properties which influence the program execution, among them the default location of the user’s properties file and the PEGASUS home location. One may set several CLI properties by giving this option multiple times. The -D option(s) must be the first option on the command line. A CLI property take precedence over the properties file property of the same key. -l, --lfn logical The logical transformation to be added. The format is: NAMESPACE::NAME:VERSION. The name is always required, namespace and version are optional. -p, --pfn physical The physical transformation to be added. For INSTALLED executables its a local file path, for all others its a url. -t, --type type The type of physical transformation. Valid values are: INSTALLED, STATIC_BINARY, DYNAMIC_BINARY, SCRIPT, SOURCE, PACMAN_PACKAGE. -r, --resource resource The resourceID where the transformation is located. -e, --profile profiles The profiles for the transformation. Multiple profiles of same namespace can be added simultaneously by separating them with a comma ",". Each profile section is written as NAMESPACE::KEY=VALUE,KEY2=VALUE2 e.g. ENV::JAVA_HOME=/usr/bin/java2,PEGASUS_HOME=/usr/local/pegasus. To add multiple namespaces you need to repeat the -e option for each namespace. e.g. -e ENV::JAVA_HOME=/usr/bin/java -e GLOBUS::JobType=MPI,COUNT=10 -s, --system systeminfo The architecture, os, osversion and glibc if any for the executable. Each system info is written in the form ARCH::OS:OSVER:GLIBC -v, --verbose Displays the output in verbose mode (Lots of Debugging info). -V, --version Displays the Pegasus version. -h, --help Generates help
-o, --oldformat Generates the output in the old single line format -c, --conf path to property file
The following are valid combinations of OPERATIONS, TRIGGERS, OPTIONS for the pegasus-tc-client. ADD Add TC Entry -a -l lfn -p pfn -t type -r resource -s system [-e profiles...] Adds a single entry into the transformation catalog. Add PFN Profile -a -P -E -p pfn -t type -r resource -e profiles ... Adds profiles to a specified physical transformation on a given resource and of a given type. Add LFN Profile -a -L -E -l lfn -e profiles ... Adds profiles to a specified logical transformation. Add Bulk Entries -a -B -f file Adds entries in bulk mode by supplying a file containing the entries. The format of the file contains 6 columns. E.g. #RESOURCE LFN PFN TYPE SYSINFO PROFILES # isi NS::NAME:VER /bin/date INSTALLED ARCH::OS:OSVERS:GLIBC NS::KEY=VALUE,KEY=VALUE;NS2::KEY=VALUE,KEY=VALUE DELETE Delete all TC -d -BPRELST Deletes the entire contents of the TC. WARNING : USE WITH CAUTION. Delete by LFN -d -L -l lfn [-r resource] [-t type] Deletes entries from the TC for a particular logical transformation and additionally a resource and or type. Delete by PFN -d -P -l lfn -p pfn [-r resource] [-t type] Deletes entries from the TC for a given logical and physical transformation and additionally on a particular resource and or of a particular type. Delete by Type -d -T -t type [-r resource] Deletes entries from TC of a specific type and/or on a specific resource. Delete by Resource -d -R -r resource Deletes the entries from the TC on a particular resource. Delete by SysInfo -d -S -s sysinfo Deletes the entries from the TC for a particular system information type. Delete Pfn Profile -d -P -E -p pfn -r resource -t type [-e profiles ..] Deletes all or specific profiles associated with a physical transformation. Delete Lfn Profile -d -L -E -l lfn -e profiles .... Deletes all or specific profiles associated with a logical transformation. QUERY Query Bulk -q -B Queries for all the contents of the TC. It produces a file format TC which can be added to another TC using the bulk option. Query LFN -q -L [-r resource] [-t type] Queries the TC for logical transformation and/or on a particular resource and/or of a particular type. Query PFN -q -P -l lfn [-r resource] [-t type] Queries the TC for physical transformations for a give logical transformation and/or on a particular resource and/or of a particular type. Query Resource -q -R -l lfn [-t type] Queries the TC for resources that are registered and/or resources registered for a specific type of transformation. Query LFN Profile -q -L -E -l lfn Queries for profiles associated with a particular logical transformation Query Pfn Profile -q -P -E -p pfn -r resource -t type Queries for profiles associated with a particular physical transformation
These are the properties you will need to set to use either the File or Database TC. For more details please check the $PEGASUS_HOME/etc/sample.properties file. pegasus.catalog.transformation Identifies what impelemntation of TC will be used. If relative name is used then the path org.griphyn.cPlanner.tc is prefixed to the name and used as the class name to load. The default value if Text. Other supported mode is File pegasus.catalog.transformation.file The file path where the text based TC is located. By default the path $PEGASUS_HOME/var/tc.data is used.
$PEGASUS_HOME/var/tc.data is the suggested location for the file corresponding to the Transformation Catalog $PEGASUS_HOME/etc/properties is the location to specify properties to change what Transformation Catalog Implementation to use and the implementation related PROPERTIES. pegasus.jar contains all compiled Java bytecode to run the Pegasus planner.
PEGASUS_HOME Path to the PEGASUS installation directory. JAVA_HOME Path to the JAVA 1.4.x installation directory. CLASSPATH The classpath should be set to contain all necessary PEGASUS files for the execution environment. To automatically add the CLASSPATH to you environment, in the $PEGASUS_HOME directory run the script source setup-user-env.csh or source setup-user-env.sh.
Gaurang Mehta <gmehta at isi dot edu> Karan Vahi <vahi at isi dot edu> Pegasus Team http://pegasus.isi.edu