Provided by: slic3r_1.3.0+dfsg1-3_amd64 bug

NAME

       slic3r - Slice 3D models into G-Code for 3D-printing

SYNOPSIS

       slic3r [ OPTIONS ] [ file.stl ] [ file2.stl ] ...

DESCRIPTION

       Slic3r  is  a  STL-to-GCODE  translator  for  RepRap  3D  printers  written  by Alessandro
       Ranellucci <aar@cpan.org> - http://slic3r.org/

OPTIONS

       Common options:

              --help Output usage screen and exit

              --version
                     Output the version of Slic3r and exit

              --save <file>
                     Save configuration to the specified file

              --load <file>
                     Load configuration from the specified file. It can be used more than once to
                     load options from multiple files.

              -o, --output <file>
                     File  to  output  gcode to (by default, the file will be saved into the same
                     directory as the input file using the --output-filename-format  to  generate
                     the  filename.) If a directory is specified for this option, the output will
                     be saved under that  directory,  and  the  filename  will  be  generated  by
                     --output-filename-format.

       Non-slicing actions (no G-code will be generated):

              --repair
                     Repair given STL files and save them as <name>_fixed.obj

              --cut <z>
                     Cut   given   input   files  at  given  Z  (relative)  and  export  them  as
                     <name>_upper.stl and <name>_lower.stl

              --split
                     Split the shells contained in given STL file into several STL files

              --info Output information about the supplied file(s) and exit

              -j, --threads <num> Number of threads to use (1+, default: 2)

       GUI options:

              --no-plater
                     Disable the plater tab

              --gui-mode
                     Overrides the configured mode (simple/expert)

              --autosave <file>
                     Automatically export current configuration to the specified file

       Output options:

              --output-filename-format
                     Output file name format; all config options enclosed  in  brackets  will  be
                     replaced   by   their   values,   as   well   as  [input_filename_base]  and
                     [input_filename] (default: [input_filename_base].gcode)

              --post-process
                     Generated G-code will be processed with the supplied script; call this  more
                     than once to process through multiple scripts.

              --export-svg
                     Export a SVG file containing slices instead of G-code.

              -m, --merge
                     If  multiple  files  are supplied, they will be composed into a single print
                     rather than processed individually.

       Printer options:

              --nozzle-diameter
                     Diameter of nozzle in mm (default: 0.5)

              --print-center
                     Coordinates in mm of the point to center the print around (default: 100,100)

              --z-offset
                     Additional height in mm to add to vertical coordinates (+/-, default: 0)

              --gcode-flavor
                     The          type          of          G-code          to           generate
                     (reprap/teacup/makerware/sailfish/mach3/no-extrusion, default: reprap)

              --use-relative-e-distances Enable this to get relative E values (default: no)

              --use-firmware-retraction
                     Enable firmware-controlled retraction using G10/G11 (default: no)

              --use-volumetric-e
                     Express E in cubic millimeters and prepend M200 (default: no)

              --gcode-arcs
                     Use  G2/G3  commands  for  native  arcs  (experimental, not supported by all
                     firmwares)

              --gcode-comments
                     Make G-code verbose by adding comments (default: no)

              --vibration-limit
                     Limit the frequency of moves on X and Y  axes  (Hz,  set  zero  to  disable;
                     default: 0)

              --pressure-advance
                     Adjust  pressure  using  the experimental advance algorithm (K constant, set
                     zero to disable; default: 0)

       Filament options:

              --filament-diameter
                     Diameter in mm of your raw filament (default: 3)

              --extrusion-multiplier
                     Change this to alter the amount of plastic extruded. There  should  be  very
                     little  need  to  change  this value, which is only useful to compensate for
                     filament packing (default: 1)

              --temperature
                     Extrusion temperature in degree Celsius, set 0 to disable (default: 200)

              --first-layer-temperature Extrusion temperature for  the  first  layer,  in  degree
              Celsius,
                     set 0 to disable (default: same as --temperature)

              --bed-temperature
                     Heated bed temperature in degree Celsius, set 0 to disable (default: 0)

              --first-layer-bed-temperature Heated bed temperature for the first layer, in degree
              Celsius,
                     set 0 to disable (default: same as --bed-temperature)

       Speed options:

              --travel-speed
                     Speed of non-print moves in mm/s (default: 130)

              --perimeter-speed
                     Speed of print moves for perimeters in mm/s (default: 30)

              --small-perimeter-speed
                     Speed of print moves for small perimeters in mm/s or % over perimeter  speed
                     (default: 30)

              --external-perimeter-speed
                     Speed  of print moves for the external perimeter in mm/s or % over perimeter
                     speed (default: 70%)

              --infill-speed
                     Speed of print moves in mm/s (default: 60)

              --solid-infill-speed Speed of print moves for solid surfaces  in  mm/s  or  %  over
              infill speed
                     (default: 60)

              --top-solid-infill-speed  Speed  of  print moves for top surfaces in mm/s or % over
              solid infill speed
                     (default: 50)

              --support-material-speed
                     Speed of support material print moves in mm/s (default: 60)

              --support-material-interface-speed
                     Speed of support material interface print moves in mm/s or  %  over  support
                     material speed (default: 100%)

              --bridge-speed
                     Speed of bridge print moves in mm/s (default: 60)

              --gap-fill-speed
                     Speed of gap fill print moves in mm/s (default: 20)

              --first-layer-speed  Speed  of print moves for bottom layer, expressed either as an
              absolute
                     value or as a percentage over normal speeds (default: 30%)

       Acceleration options:

              --perimeter-acceleration
                     Overrides firmware's default acceleration for perimeters. (mm/s^2, set  zero
                     to disable; default: 0)

              --infill-acceleration
                     Overrides  firmware's  default acceleration for infill. (mm/s^2, set zero to
                     disable; default: 0)

              --bridge-acceleration
                     Overrides firmware's default acceleration for bridges. (mm/s^2, set zero  to
                     disable; default: 0)

              --first-layer-acceleration
                     Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
                     to disable; default: 0)

              --default-acceleration
                     Acceleration will be reset to this value after the specific  settings  above
                     have been applied. (mm/s^2, set zero to disable; default: 130)

       Accuracy options:

              --layer-height
                     Layer height in mm (default: 0.4)

              --first-layer-height Layer height for first layer (mm or %, default: 0.35)

              --infill-every-layers
                     Infill every N layers (default: 1)

              --solid-infill-every-layers
                     Force a solid layer every N layers (default: 0)

       Print options:

              --perimeters
                     Number of perimeters/horizontal skins (range: 0+, default: 3)

              --top-solid-layers
                     Number of solid layers to do for top surfaces (range: 0+, default: 3)

              --bottom-solid-layers
                     Number of solid layers to do for bottom surfaces (range: 0+, default: 3)

              --solid-layers
                     Shortcut for setting the two options above at once

              --fill-density
                     Infill density (range: 0%-100%, default: 40%)

              --fill-angle
                     Infill angle in degrees (range: 0-90, default: 45)

              --fill-pattern
                     Pattern to use to fill non-solid layers (default: honeycomb)

              --external-fill-pattern Pattern to use to fill solid layers (default: rectilinear)

              --start-gcode
                     Load  initial G-code from the supplied file. This will overwrite the default
                     command (home all axes [G28]).

              --end-gcode
                     Load final G-code from the supplied file. This will  overwrite  the  default
                     commands  (turn  off  temperature  [M104  S0],  home X axis [G28 X], disable
                     motors [M84]).

              --layer-gcode
                     Load layer-change G-code from the supplied file (default: nothing).

              --toolchange-gcode
                     Load tool-change G-code from the supplied file (default: nothing).

              --seam-position
                     Position of loop starting points (random/nearest/aligned, default: aligned).

              --external-perimeters-first Reverse perimeter order. (default: no)

              --spiral-vase
                     Experimental option to raise Z gradually when printing  single-walled  vases
                     (default: no)

              --only-retract-when-crossing-perimeters
                     Disable  retraction  when  travelling  between  infill paths inside the same
                     island.  (default: no)

              --solid-infill-below-area
                     Force solid infill when a region has a  smaller  area  than  this  threshold
                     (mm^2, default: 70)

              --infill-only-where-needed
                     Only infill under ceilings (default: no)

              --infill-first
                     Make infill before perimeters (default: no)

                     Quality options (slower slicing):

              --extra-perimeters
                     Add more perimeters when needed (default: yes)

              --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed
                     (default: no)

              --thin-walls
                     Detect single-width walls (default: yes)

              --overhangs
                     Experimental option  to  use  bridge  flow,  speed  and  fan  for  overhangs
                     (default: yes)

       Support material options:

              --support-material
                     Generate support material for overhangs

              --support-material-threshold
                     Overhang  threshold  angle  (range:  0-90,  set  0  for automatic detection,
                     default: 0)

              --support-material-pattern
                     Pattern to use for support material (default: pillars)

              --support-material-spacing
                     Spacing between pattern lines (mm, default: 2.5)

              --support-material-angle
                     Support material angle in degrees (range: 0-90, default: 0)

              --support-material-interface-layers
                     Number of perpendicular layers between  support  material  and  object  (0+,
                     default: 3)

              --support-material-interface-spacing
                     Spacing  between  interface  pattern  lines (mm, set 0 to get a solid layer,
                     default: 0)

              --raft-layers
                     Number of layers to raise the printed objects by (range: 0+, default: 0)

              --support-material-enforce-layers
                     Enforce support material on the specified  number  of  layers  from  bottom,
                     regardless of --support-material and threshold (0+, default: 0)

              --dont-support-bridges
                     Experimental  option  for  preventing  support material from being generated
                     under bridged areas (default: yes)

       Retraction options:

              --retract-length
                     Length of retraction in mm when pausing extrusion (default: 1)

              --retract-speed
                     Speed for retraction in mm/s (default: 30)

              --retract-restart-extra
                     Additional amount of filament in mm to push  after  compensating  retraction
                     (default: 0)

              --retract-before-travel
                     Only retract before travel moves of this length in mm (default: 2)

              --retract-lift
                     Lift Z by the given distance in mm when retracting (default: 0)

              --retract-layer-change
                     Enforce a retraction before each Z move (default: yes)

              --wipe Wipe the nozzle while doing a retraction (default: no)

                     Retraction options for multi-extruder setups:

              --retract-length-toolchange
                     Length of retraction in mm when disabling tool (default: 1)

              --retract-restart-extra-toolchnage
                     Additional  amount  of filament in mm to push after switching tool (default:
                     0)

       Cooling options:

              --cooling
                     Enable fan and cooling control

              --min-fan-speed
                     Minimum fan speed (default: 35%)

              --max-fan-speed
                     Maximum fan speed (default: 100%)

              --bridge-fan-speed
                     Fan speed to use when bridging (default: 100%)

              --fan-below-layer-time Enable fan if layer print time  is  below  this  approximate
              number
                     of seconds (default: 60)

              --slowdown-below-layer-time Slow down if layer print time is below this approximate
              number
                     of seconds (default: 30)

              --min-print-speed
                     Minimum print speed (mm/s, default: 10)

              --disable-fan-first-layers Disable fan for the first N layers (default: 1)

              --fan-always-on
                     Keep fan always on at min fan speed, even for layers that don't need cooling

       Skirt options:

              --skirts
                     Number of skirts to draw (0+, default: 1)

              --skirt-distance
                     Distance in mm between innermost skirt and object (default: 6)

              --skirt-height
                     Height of skirts to draw (expressed in layers, 0+, default: 1)

              --min-skirt-length
                     Generate no less than the number of loops required to consume this length of
                     filament on the first layer, for each extruder (mm, 0+, default: 0)

              --brim-width
                     Width  of  the brim that will get added to each object to help adhesion (mm,
                     default: 0)

       Transform options:

              --scale
                     Factor for scaling input object (default: 1)

              --rotate
                     Rotation angle in degrees (0-360, default: 0)

              --duplicate
                     Number of items with auto-arrange (1+, default: 1)

              --duplicate-grid
                     Number of items with grid arrangement (default: 1,1)

              --duplicate-distance
                     Distance in mm between copies (default: 0)

              --xy-size-compensation
                     Grow/shrink objects by the configured absolute distance (mm, default: 0)

       Sequential printing options:

              --complete-objects
                     When printing multiple objects  and/or  copies,  complete  each  one  before
                     starting the next one; watch out for extruder collisions (default: no)

              --extruder-clearance-radius  Radius  in  mm above which extruder won't collide with
              anything
                     (default: 20)

              --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance
              from
                     extruder tip and carriage bottom (default: 20)

       Miscellaneous options:

              --notes
                     Notes to be added as comments to the output file

              --resolution
                     Minimum detail resolution (mm, set zero for full resolution, default: 0)

                     Flow options (advanced):

              --extrusion-width
                     Set  extrusion  width  manually;  it  accepts either an absolute value in mm
                     (like 0.65) or a percentage over layer height (like 200%)

              --first-layer-extrusion-width
                     Set a different extrusion width for first layer

              --perimeter-extrusion-width
                     Set a different extrusion width for perimeters

              --external-perimeter-extrusion-width
                     Set a different extrusion width for external perimeters

              --infill-extrusion-width
                     Set a different extrusion width for infill

              --solid-infill-extrusion-width
                     Set a different extrusion width for solid infill

              --top-infill-extrusion-width
                     Set a different extrusion width for top infill

              --support-material-extrusion-width
                     Set a different extrusion width for support material

              --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)

       Multiple extruder options:

              --extruder-offset
                     Offset of each extruder, if firmware doesn't handle the displacement (can be
                     specified multiple times, default: 0x0)

              --perimeter-extruder
                     Extruder to use for perimeters (1+, default: 1)

              --infill-extruder
                     Extruder to use for infill (1+, default: 1)

              --solid-infill-extruder
                     Extruder to use for infill (1+, default: 1)

              --support-material-extruder
                     Extruder to use for support material (1+, default: 1)

              --support-material-interface-extruder
                     Extruder to use for support material interface (1+, default: 1)

              --ooze-prevention
                     Drop  temperature  and  park  extruders  outside  a full skirt for automatic
                     wiping (default: no)

              --standby-temperature-delta
                     Temperature difference to be applied when an  extruder  is  not  active  and
                     --ooze-prevention is enabled (default: -5)