Provided by: sxiv_25-1_amd64 bug

NAME

       sxiv - Simple X Image Viewer

SYNOPSIS

       sxiv  [-abcfhiopqrtvZ] [-A FRAMERATE] [-e WID] [-G GAMMA] [-g GEOMETRY] [-N NAME] [-n NUM]
       [-S DELAY] [-s MODE] [-z ZOOM] FILE...

DESCRIPTION

       sxiv is a simple image viewer for X.

       It has two modes of operation: image and thumbnail mode. The default  is  image  mode,  in
       which  only  the  current  image  is  shown. In thumbnail mode a grid of small previews is
       displayed, making it easy to choose an image to open.

       Please note, that the fullscreen mode requires an EWMH/NetWM compliant window manager.

OPTIONS

       -A FRAMERATE
              Play animations with a constant frame rate set to FRAMERATE.

       -a     Play animations of multi-frame images.

       -b     Do not show info bar on bottom of window.

       -c     Remove all orphaned cache files from the thumbnail cache directory and exit.

       -e WID Embed sxiv's window into window whose ID is WID.

       -f     Start in fullscreen mode.

       -G GAMMA
              Set image gamma to GAMMA (-32..32).

       -g GEOMETRY
              Set window position and size. See section GEOMETRY SPECIFICATIONS of X(7) for  more
              information on GEOMETRY argument.

       -N NAME
              Set the resource name of sxiv's X window to NAME.

       -n NUM Start at picture number NUM.

       -h     Print brief usage information to standard output and exit.

       -i     Read names of files to open from standard input. Also done if FILE is `-'.

       -o     Write  list  of  all  marked files to standard output when quitting. In combination
              with -i sxiv can be used as a visual filter/pipe.

       -p     Enable private mode, in which sxiv does not write any cache or temporary files.

       -q     Be quiet, disable warnings to standard error stream.

       -r     Search the given directories recursively for images to view.

       -S DELAY
              Start in slideshow mode. Set the delay between images to DELAY seconds.  DELAY  may
              be a floating point number.

       -s MODE
              Set  scale  mode  according  to MODE character. Supported modes are: [d]own, [f]it,
              [w]idth, [h]eight.

       -t     Start in thumbnail mode.

       -v     Print version information to standard output and exit.

       -Z     The same as `-z 100'.

       -z ZOOM
              Set zoom level to ZOOM percent.

KEYBOARD COMMANDS

   General
       The following keyboard commands are available in both image and thumbnail mode:

       0-9    Prefix the next command with a number (denoted via count).

       q      Quit sxiv.

       Return Switch to thumbnail mode / open selected image in image mode.

       f      Toggle fullscreen mode.

       b      Toggle visibility of info bar on bottom of window.

       Ctrl-x Send the next key to the external key-handler. See section EXTERNAL KEY HANDLER for
              more information.

       g      Go to the first image.

       G      Go to the last image, or image number count.

       r      Reload image.

       D      Remove current image from file list and go to next image.

       Ctrl-h, Ctrl-Left
              Scroll left one screen width.

       Ctrl-j, Ctrl-Down
              Scroll down one screen height.

       Ctrl-k, Ctrl-Up
              Scroll up one screen height.

       Ctrl-l, Ctrl-Right
              Scroll right one screen width.

       +      Zoom in.

       -      Zoom out.

       m      Mark/unmark the current image.

       M      Reverse all image marks.

       Ctrl-M Repeat  last  mark  action  on  all  images from the last marked/unmarked up to the
              current one.

       Ctrl-m Remove all image marks.

       N      Go count marked images forward.

       P      Go count marked images backward.

       {      Decrease gamma correction by count steps.

       }      Increase gamma correction by count steps.

       Ctrl-g Reset gamma correction.

   Thumbnail mode
       The following keyboard commands are only available in thumbnail mode:

       h, Left
              Move selection left count times.

       j, Down
              Move selection down count times.

       k, Up  Move selection up count times.

       l, Right
              Move selection right count times.

       R      Reload all thumbnails.

   Image mode
       The following keyboard commands are only available in image mode:

       Navigate image list:

       n, Space
              Go count images forward.

       p, Backspace
              Go count images backward.

       [      Go count * 10 images backward.

       ]      Go count * 10 images forward.

       Handle multi-frame images:

       Ctrl-n Go count frames of a multi-frame image forward.

       Ctrl-p Go count frames of a multi-frame image backward.

       Ctrl-Space
              Play/stop animations of multi-frame images.

       Panning:

       h, Left
              Scroll image 1/5 of window width or count pixel left.

       j, Down
              Scroll image 1/5 of window height or count pixel down.

       k, Up  Scroll image 1/5 of window height or count pixel up.

       l, Right
              Scroll image 1/5 of window width or count pixel right.

       H      Scroll to left image edge.

       J      Scroll to bottom image edge.

       K      Scroll to top image edge.

       L      Scroll to right image edge.

       Zooming:

       =      Set zoom level to 100%, or count%.

       w      Set zoom level to 100%, but fit large images into window.

       W      Fit image to window.

       e      Fit image to window width.

       E      Fit image to window height.

       Rotation:

       <      Rotate image counter-clockwise by 90 degrees.

       >      Rotate image clockwise by 90 degrees.

       ?      Rotate image by 180 degrees.

       Flipping:

       |      Flip image horizontally.

       _      Flip image vertically.

       Miscellaneous:

       a      Toggle anti-aliasing.

       A      Toggle visibility of alpha-channel, i.e. image transparency.

       s      Toggle slideshow mode and/or set the delay between images to count seconds.

MOUSE COMMANDS

       The following mouse mappings are available in image mode:

       General:

       Button3
              Switch to thumbnail mode.

       Navigate image list:

       Button1
              Go to the next image if the mouse cursor is in the right part of the window  or  to
              the previous image if it is in the left part.

       Panning:

       Button2
              Pan  the  image  according to the mouse cursor position in the window while keeping
              this button pressed down.

       Zooming:

       ScrollUp
              Zoom in.

       ScrollDown
              Zoom out.

STATUS BAR

       The information displayed on the left side of the status bar  can  be  replaced  with  the
       output  of  a user-provided script, which is called by sxiv whenever an image gets loaded.
       The path of this script is $XDG_CONFIG_HOME/sxiv/exec/image-info and the  arguments  given
       to it are: 1) path to image file, 2) image width, 3) image height.

       There    is    also    an    example    script    installed    together   with   sxiv   as
       /usr/share/sxiv/exec/image-info.

EXTERNAL KEY HANDLER

       Additional external keyboard commands can be defined using a handler  program  located  in
       $XDG_CONFIG_HOME/sxiv/exec/key-handler.   The  handler is invoked by pressing Ctrl-x.  The
       next key combo is passed as its first argument. Passed via stdin are  the  images  to  act
       upon,  one  path  per line: all marked images, if in thumbnail mode and at least one image
       has been marked, otherwise the current  image.   sxiv(1)  will  block  until  the  handler
       terminates. It then checks which images have been modified and reloads them.

       The  key  combo  argument  has the following form: "[C-][M-][S-]KEY", where C/M/S indicate
       Ctrl/Meta(Alt)/Shift  modifier  states  and  KEY  is   the   X   keysym   as   listed   in
       /usr/include/X11/keysymdef.h without the "XK_" prefix.

       There  is also an example script installed together with sxiv as /usr/share/sxiv/exec/key-
       handler.

THUMBNAIL CACHING

       sxiv stores all thumbnails under $XDG_CACHE_HOME/sxiv/.

       Use the command line option -c to remove all orphaned cache files. Additionally,  run  the
       following command afterwards inside the cache directory to remove empty subdirectories:

              find . -depth -type d -empty ! -name '.' -exec rmdir {} \;

AUTHOR

       Bert Muennich   <ber.t at posteo.de>

CONTRIBUTORS

       Bastien Dejean  <nihilhill at gmail.com>
       Dave Reisner    <d at falconindy.com>
       Fung SzeTat     <sthorde at gmail.com>
       Max Voit        <mvdev at with-eyes.net>

HOMEPAGE

       https://github.com/muennich/sxiv

SEE ALSO

       feh(1), qiv(1)

                                             sxiv-25                                      SXIV(1)