Provided by: tpm2-tools_3.1.3-2_amd64 bug

NAME

       tpm2_dictionarylockout(1) - setup or clear dictionary-attack-lockout parameters.

SYNOPSIS

       tpm2_dictionarylockout [OPTIONS]

DESCRIPTION

       tpm2_dictionarylockout(1)   -   setup   dictionary-attack-lockout   parameters   or  clear
       dictionary-attack-lockout state, if any passwd option is missing, assume NULL.

OPTIONS

       · -s, –setup-parameters=SETUP_PARAMETERS: specifies  the  tool  should  operate  to  setup
         dictionary-attack-lockout parameters.

       · -c, –clear-lockout: specifies the tool should operate to clear dictionary-attack-lockout
         state.

       · -l, -lockout-recovery-time=LOCKOUT_TIME: specifies  the  wait  time  in  seconds  before
         another TPM_RH_LOCKOUT authentication attempt can be made after a failed authentication.

       · -t,  –recovery-time=RECOVERY_TIME:  specifies  the  wait  time in seconds before another
         DA-protected-object authentication attempt can be made after max-tries number of  failed
         authentications.

       · -n, –max-tries=MAX_TRYS: specifies the maximum number of allowed authentication attempts
         on DA-protected-object; after which DA is activated.

       · -S, –input-session-handle=SESSION_HANDLE: Optional Input session handle  from  a  policy
         session for authorization.

COMMON OPTIONS

       This  collection  of options are common to many programs and provide information that many
       users may expect.

       · -h, –help: Display the tools manpage.  This requires the manpages to be installed or  on
         MANPATH, See man(1) for more details.

       · -v, –version: Display version information for this tool, supported tctis and exit.

       · -V,  –verbose:  Increase  the information that the tool prints to the console during its
         execution.  When using this option the file and line number are printed.

       · -Q, –quiet: Silence normal tool output to stdout.

       · -Z, –enable-errata: Enable the application of errata fixups.  Useful if an errata  fixup
         needs to be applied to commands sent to the TPM.  # TCTI ENVIRONMENT

       This  collection  of  environment variables that may be used to configure the various TCTI
       modules available.

       The values passed through these variables can be overridden on a per-command  basis  using
       the available command line options, see the TCTI_OPTIONS section.

       The variables respected depend on how the software was configured.

       · TPM2TOOLS_TCTI_NAME: Select the TCTI used for communication with the next component down
         the TSS stack.  In most configurations this will be the TPM but it could be a  simulator
         or proxy.  The current known TCTIs are:

         · tabrmd       -       The       new      resource      manager,      called      tabrmd
           (https://github.com/01org/tpm2-abrmd).

         · socket - Typically used with the old  resource  manager,  or  talking  directly  to  a
           simulator.

         · device - Used when talking directly to a TPM device file.

       · TPM2TOOLS_DEVICE_FILE:  When  using  the  device TCTI, specify the TPM device file.  The
         default is “/dev/tpm0”.

         Note: Using the tpm directly requires the users to ensure that  concurrent  access  does
         not  occur and that they manage the tpm resources.  These tasks are usually managed by a
         resource manager.  Linux 4.12 and greater supports an  in  kernel  resource  manager  at
         “/dev/tpmrm”, typically “/dev/tpmrm0”.

       · TPM2TOOLS_SOCKET_ADDRESS:  When  using  the  socket  TCTI, specify the domain name or IP
         address used.  The default is 127.0.0.1.

       · TPM2TOOLS_SOCKET_PORT: When using the socket TCTI, specify the port  number  used.   The
         default is 2321.

TCTI OPTIONS

       This  collection of options are used to configure the varous TCTI modules available.  They
       override any environment variables.

       · -T, –tcti=TCTI_NAME[:TCTI_OPTIONS]: Select the TCTI used for communication with the next
         component down the TSS stack.  In most configurations this will be the resource manager:
         tabrmd  (https://github.com/01org/tpm2-abrmd)  Optionally,  tcti  specific  options  can
         appended to TCTI_NAME by appending a : to TCTI_NAME.

         · For  the device TCTI, the TPM device file for use by the device TCTI can be specified.
           The default is /dev/tpm0.  Example: -T device:/dev/tpm0

         · For the socket TCTI, the domain name or IP address and port number used by the  socket
           can   be   specified.    The   default   are   127.0.0.1   and   2321.    Example:  -T
           socket:127.0.0.1:2321

         · For the abrmd TCTI, it takes no options.  Example: -T abrmd

EXAMPLES

              tpm2_dictionarylockout -c -p passwd
              tpm2_dictionarylockout -s -n 5 -t 6 -l 7 -p passwd

RETURNS

       0 on success or 1 on failure.

BUGS

       Github Issues (https://github.com/01org/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)