Provided by: tpm2-tools_3.1.3-2_amd64 bug

NAME

       tpm2_startup(1) - Send a startup command to the TPM.

SYNOPSIS

       tpm2_startup [OPTIONS]

DESCRIPTION

       tpm2_startup(1) Send a TPM2_Startup command with either TPM_SU_CLEAR or TPM_SU_STATE.

       NOTE:  Typically a Resource Manager or low-level/boot software will have already sent this
       command.

OPTIONS

       · -c, –clear:

         Startup type sent will be TPM_SU_CLEAR instead of TPM2_SU_STATE.

COMMON OPTIONS

       This collection of options are common to many programs and provide information  that  many
       users may expect.

       · -h,  –help: Display the tools manpage.  This requires the manpages to be installed or on
         MANPATH, See man(1) for more details.

       · -v, –version: Display version information for this tool, supported tctis and exit.

       · -V, –verbose: Increase the information that the tool prints to the  console  during  its
         execution.  When using this option the file and line number are printed.

       · -Q, –quiet: Silence normal tool output to stdout.

       · -Z,  –enable-errata: Enable the application of errata fixups.  Useful if an errata fixup
         needs to be applied to commands sent to the TPM.  # TCTI ENVIRONMENT

       This collection of environment variables that may be used to configure  the  various  TCTI
       modules available.

       The  values  passed through these variables can be overridden on a per-command basis using
       the available command line options, see the TCTI_OPTIONS section.

       The variables respected depend on how the software was configured.

       · TPM2TOOLS_TCTI_NAME: Select the TCTI used for communication with the next component down
         the  TSS stack.  In most configurations this will be the TPM but it could be a simulator
         or proxy.  The current known TCTIs are:

         · tabrmd      -      The      new      resource       manager,       called       tabrmd
           (https://github.com/01org/tpm2-abrmd).

         · socket  -  Typically  used  with  the  old  resource manager, or talking directly to a
           simulator.

         · device - Used when talking directly to a TPM device file.

       · TPM2TOOLS_DEVICE_FILE: When using the device TCTI, specify the  TPM  device  file.   The
         default is “/dev/tpm0”.

         Note:  Using  the  tpm directly requires the users to ensure that concurrent access does
         not occur and that they manage the tpm resources.  These tasks are usually managed by  a
         resource  manager.   Linux  4.12  and  greater supports an in kernel resource manager at
         “/dev/tpmrm”, typically “/dev/tpmrm0”.

       · TPM2TOOLS_SOCKET_ADDRESS: When using the socket TCTI, specify  the  domain  name  or  IP
         address used.  The default is 127.0.0.1.

       · TPM2TOOLS_SOCKET_PORT:  When  using  the socket TCTI, specify the port number used.  The
         default is 2321.

TCTI OPTIONS

       This collection of options are used to configure the varous TCTI modules available.   They
       override any environment variables.

       · -T, –tcti=TCTI_NAME[:TCTI_OPTIONS]: Select the TCTI used for communication with the next
         component down the TSS stack.  In most configurations this will be the resource manager:
         tabrmd  (https://github.com/01org/tpm2-abrmd)  Optionally,  tcti  specific  options  can
         appended to TCTI_NAME by appending a : to TCTI_NAME.

         · For the device TCTI, the TPM device file for use by the device TCTI can be  specified.
           The default is /dev/tpm0.  Example: -T device:/dev/tpm0

         · For  the socket TCTI, the domain name or IP address and port number used by the socket
           can  be   specified.    The   default   are   127.0.0.1   and   2321.    Example:   -T
           socket:127.0.0.1:2321

         · For the abrmd TCTI, it takes no options.  Example: -T abrmd

EXAMPLES

              tpm2_startup
              tpm2_startup -c

RETURNS

       0 on success or 1 on failure.

BUGS

       Github Issues (https://github.com/01org/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)