Provided by: transmission-cli_2.94-2ubuntu1_amd64
transmission-remote — a remote control utility for transmission-daemon(1) and transmission(1)
transmission-remote [host:port | host | port] [-a filenames-or-URLs] [-as] [-AS] [-asd number] [-asu number] [-asc] [-ASC] [-b] [-c path | -C] [-d number | -D] [-e size] [-er | -ep | -et] [--exit] [-f] [-g files] [-G files] [-gsr ratio] [-GSR] [-h] [-i] [-ic] [-if] [-ip] [-it] [-l] [-m | -M] [-n user:pass] [-ne] [-N netrc] [-o | -O] [-p port] [-Bh] [-Bn] [-Bl] [-ph files] [-pl files] [-pn files] [-pr peers] [-r] [-rad] [-s | -S] [-sr ratio] [-SR] [-srd] [-si] [-st] [-t all | active | id | hash] [-hl] [-HL] [-u number | -U] [-utp | -no-utp] [-v] [-V] [-w download-dir] [-x | -X] [-y | -Y] [-pi]
transmission-remote is a remote control utility for transmission(1) and transmission-daemon(1). By default, transmission-remote connects to the transmission session at localhost:9091. Other sessions can be controlled by specifying a different host and/or port.
-a --add filenames-or-URLs Add torrents to transmission. -b --debug Enable debugging mode. -as --alt-speed Use the alternate Limits. -AS --no-alt-speed Don't use the alternate Limits. -asd --alt-speed-downlimit limit Limit the alternate download speed to limit kilobytes per second. -asu --alt-speed-uplimit limit Limit the alternate upload speed to limit kilobytes per second. -asc --alt-speed-scheduler Use the scheduled on/off times. -ASC --no-alt-speed-scheduler Don't use the scheduled on/off days and times. --alt-speed-time-begin time Time to start using the alt speed limits (in hhmm). --alt-speed-time-end time Time to stop using the alt speed limits (in hhmm). --alt-speed-days days Set the number of days on which to enable the speed scheduler, using a list such as "2,4-6". --torrent-done-script filename Specify a file to run each time a torrent finishes --no-torrent-done-script Don't run any script when a torrent finishes -c --incomplete-dir dir When adding new torrents, store their contents in directory until the torrent is done. -C --no-incomplete-dir Don't store incomplete torrents in a different directory. -d --downlimit limit Limit the maximum download speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -D --no-downlimit Disable download speed limits. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -e --cache size Set the session's maximum memory cache size in MiB. This cache is used to reduce disk IO. -er --encryption-required Encrypt all peer connections. -ep --encryption-preferred Prefer encrypted peer connections. -et --encryption-tolerated Prefer unencrypted peer connections. --exit Tell the Transmission to initiate a shutdown. -f --files Get a file list for the current torrent(s) -g --get all | file-index | files Mark file(s) for download. all marks all all of the torrent's files for downloading, file-index adds a single file to the download list, and files adds multiple files to the download list, such as "-g1,3-5" to add files #1, #3, #4, and #5 to the download list. -G --no-get all | file-index | files Mark file(s) for not downloading. -gsr --global-seedratio ratio All torrents, unless overridden by a per-torrent setting, should seed until a specific ratio -GSR --no-global-seedratio All torrents, unless overridden by a per-torrent setting, should seed regardless of ratio -h --help Print command-line option descriptions. -i --info Show details of the current torrent(s) -if --info-files List the specified torrent's files -ip --info-peers List the specified torrent's peers -ic --info-pieces List the specified torrent's pieces -it --info-trackers List the specified torrent's trackers -si --session-info List session information from the server -st --session-stats List statistical information from the server -l --list List all torrents -m --portmap Enable portmapping via NAT-PMP or UPnP -M --no-portmap Disable portmapping -n --auth username:password Set the username and password for authentication -ne --authenv Set the authentication information from the TR_AUTH environment variable which must be formatted as username:password. -N --netrc filename Set the authentication information from a netrc file. See netrc(5) for more information. -o --dht Enable distributed hash table (DHT). -O --no-dht Disable distribued hash table (DHT). -p --port port Set the port for use when listening for incoming peer connections -Bh --bandwidth-high Give this torrent first chance at available bandwidth -Bn --bandwidth-normal Give this torrent the bandwidth left over by high priority torrents -Bl --bandwidth-low Give this torrent the bandwidth left over by high and normal priority torrents -ph --priority-high all | file-index | files Try to download the specified file(s) first. all marks all of the torrent's files as normal priority, file-index sets a single file's priority as normal, and files sets multiple files' priorities as normal, such as "-pn1,3-5" to normalize files #1, #3, #4, and #5. -pn --priority-normal all | file-index | files Try to download the specified files normally. -pl --priority-low all | file-index | files Try to download the specified files last -pr --peers number Set the maximum number of peers. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -r --remove Remove the current torrent(s). This does not delete the downloaded data. -rad --remove-and-delete Remove the current torrent(s) and delete their downloaded data. --reannounce Reannounce the current torrent(s). This is the same as the GUI's "ask tracker for more peers" button. --move Move the current torrents' data from their current locations to the specified directory. --find Tell Transmission where to look for the current torrents' data. -sr --seedratio ratio Let the current torrent(s) seed until a specific ratio -SR --no-seedratio Let the current torrent(s) seed regardless of ratio -srd --seedratio-default Let the current torrent(s) use the global seedratio settings -td --tracker-add tracker Add a tracker to a torrent -tr --tracker-remove trackerId Remove a tracker from a torrent -s --start Start the current torrent(s) -S --stop Stop the current torrent(s) from downloading or seeding --start-paused Start added torrents paused --no-start-paused Start added torrents unpaused -t --torrent all | active | id | torrent-hash Set the current torrent(s) for use by subsequent options. The literal all will apply following requests to all torrents; the literal active will apply following requests to recently-active torrents; and specific torrents can be chosen by id or hash. To set more than one current torrent, join their ids together in a list, such as "-t2,4,6-8" to operate on the torrents whose IDs are 2, 4, 6, 7, and 8. --trash-torrent Delete torrents after adding --no-trash-torrent Do not delete torrents after adding -hl --honor-session Make the current torrent(s) honor the session limits. -HL --no-honor-session Make the current torrent(s) not honor the session limits. -u --uplimit limit Limit the maximum upload speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -U --no-uplimit Disable upload speed limits. --utp Enable uTP for peer connections. --no-utp Disable uTP for peer connections. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -v --verify Verify the current torrent(s) -V --version Show version number and exit -w --download-dir directory When used in conjunction with --add, set the new torrent's download folder. Otherwise, set the default download folder. -x --pex Enable peer exchange (PEX). -X --no-pex Disable peer exchange (PEX). -y --lds Enable local peer discovery (LPD). -Y --no-lds Disable local peer discovery (LPD). -pi --peer-info List the current torrent's connected peers. In the `status' section of the list, the following shorthand is used: D: Downloading from this peer d: We would download from this peer if they would let us E: Encrypted connection H: Peer was found through DHT I: Peer is an incoming connection K: Peer has unchoked us, but we're not interested O: Optimistic unchoked T: Peer is connected over uTP U: Uploading to peer u: We would upload to this peer if they asked X: Peer was discovered through Peer Exchange (PEX) ?: We unchoked this peer, but they're not interested --blocklist-update Update blocklist from URL specified in remote client's settings with blocklist-url key.
List all torrents: $ transmission-remote -l List all active torrents: $ transmission-remote -tactive -l Set download and upload limits to 400 kB/sec and 60 kB/sec: $ transmission-remote -d400 -u60 $ transmission-remote --downlimit=400 --uplimit=60 Set alternate download and upload limits to 100 kB/sec and 20 kB/sec: $ transmission-remote -asd100 -asu20 $ transmission-remote --alt-speed-downlimit=100 --alt-speed-uplimit=20 Set the scheduler to use the alternate speed limits on weekdays between 10AM and 11PM $ transmission-remote --alt-speed-time-begin=1000 $ transmission-remote --alt-speed-time-end=2300 $ transmission-remote --alt-speed-days=1-5 $ transmission-remote --alt-speed-scheduler List all torrents' IDs and states: $ transmission-remote -l List all torrents from a remote session that requires authentication: $ transmission-remote host:9091 --auth=username:password -l Start all torrents: $ transmission-remote -tall --start Add two torrents: $ transmission-remote -a one.torrent two.torrent Add all torrents in ~/Desktop: $ transmission-remote -a ~/Desktop/*torrent Get detailed information on the torrent whose ID is '1': $ transmission-remote -t1 -i Get a list of a torrent's files: $ transmission-remote -t1 -f Download only its second and fourth files: $ transmission-remote -t1 -Gall -g2,4 Set all torrents' first two files' priorities to high: $ transmission-remote -tall -ph1,2 Set all torrents' files' priorities to normal: $ transmission-remote -tall -pnall
http_proxy Sets the proxy to use for http tracker announces.
Jordan Lee, Josh Elsasser, Eric Petit, and Mitchell Livingston.
transmission-create(1), transmission-daemon(1), transmission-edit(1), transmission-gtk(1), transmission-qt(1), transmission-remote(1), transmission-show(1) https://transmissionbt.com/