Provided by: libcrypt-ssleay-perl_0.73.06-1build2_amd64 bug

NAME

       Crypt::SSLeay - OpenSSL support for LWP

HEARTBLEED WARNING

       "perl Makefile.PL" will display a warning if it thinks your OpenSSL might be vulnerable to
       the  Heartbleed Bug <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0160>. You
       can, of course, go ahead and install the module, but you should be aware that your system
       might be exposed to an extremely serious vulnerability. This is just a heuristic based on
       the version reported by OpenSSL. It is entirely possible that your distrbution actually
       pushed a patched library, so if you have concerns, you should investigate further.

SYNOPSIS

           use Net::SSL;
           use LWP::UserAgent;

           my $ua  = LWP::UserAgent->new(
               ssl_opts => { verify_hostname => 0 },
           );

           my $response = $ua->get('https://www.example.com/');
           print $response->content, "\n";

DESCRIPTION

       This Perl module provides support for the HTTPS protocol under LWP, to allow an
       LWP::UserAgent object to perform GET, HEAD, and POST requests over encrypted socket
       connections. Please see LWP for more information on POST requests.

       The "Crypt::SSLeay" package provides "Net::SSL", which, if requested, is loaded by
       "LWP::Protocol::https" for https requests and provides the necessary SSL glue.

       This distribution also makes following deprecated modules available:

           Crypt::SSLeay::CTX
           Crypt::SSLeay::Conn
           Crypt::SSLeay::X509

DO YOU NEED Crypt::SSLeay?

       Starting with version 6.02 of LWP, "https" support was unbundled into
       LWP::Protocol::https. This module specifies as one of its prerequisites IO::Socket::SSL
       which is automatically used by LWP::UserAgent unless this preference is overridden
       separately. "IO::Socket::SSL" is a more complete implementation, and, crucially, it allows
       hostname verification.  "Crypt::SSLeay" does not support this. At this point,
       "Crypt::SSLeay" is maintained to support existing software that already depends on it.
       However, it is possible that your software does not really depend on "Crypt::SSLeay", only
       on the ability of "LWP::UserAgent" class to communicate with sites over SSL/TLS.

       If are using version "LWP" 6.02 or later, and therefore have installed
       "LWP::Protocol::https" and its dependencies, and do not explicitly "use" "Net::SSL" before
       loading "LWP::UserAgent", or override the default socket class, you are probably using
       "IO::Socket::SSL" and do not really need "Crypt::SSLeay".

       If you have both "Crypt::SSLeay" and "IO::Socket::SSL" installed, and would like to force
       "LWP::UserAgent" to use "Crypt::SSLeay", you can use:

           use Net::HTTPS;
           $Net::HTTPS::SSL_SOCKET_CLASS = 'Net::SSL';
           use LWP::UserAgent;

       or

           local $ENV{PERL_NET_HTTPS_SSL_SOCKET_CLASS} = 'Net::SSL';
           use LWP::UserAgent;

       or

           use Net::SSL;
           use LWP::UserAgent;

ENVIRONMENT VARIABLES

       Specify SSL Socket Class
           $ENV{PERL_NET_HTTPS_SSL_SOCKET_CLASS} can be used to instruct "LWP::UserAgent" to use
           "Net::SSL" for HTTPS support rather than "IO::Socket::SSL".

       Proxy Support
               $ENV{HTTPS_PROXY} = 'http://proxy_hostname_or_ip:port';

       Proxy Basic Authentication
               $ENV{HTTPS_PROXY_USERNAME} = 'username';
               $ENV{HTTPS_PROXY_PASSWORD} = 'password';

       SSL diagnostics and Debugging
               $ENV{HTTPS_DEBUG} = 1;

       Default SSL Version
               $ENV{HTTPS_VERSION} = '3';

       Client Certificate Support
               $ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
               $ENV{HTTPS_KEY_FILE}  = 'certs/notacakeynopass.pem';

       CA cert Peer Verification
               $ENV{HTTPS_CA_FILE}   = 'certs/ca-bundle.crt';
               $ENV{HTTPS_CA_DIR}    = 'certs/';

       Client PKCS12 cert support
               $ENV{HTTPS_PKCS12_FILE}     = 'certs/pkcs12.pkcs12';
               $ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';

INSTALL

   OpenSSL
       You must have OpenSSL installed before compiling this module. You can get the latest
       OpenSSL package from <https://www.openssl.org/source/>. We no longer support pre-2000
       versions of OpenSSL.

       If you are building OpenSSL from source, please follow the directions included in the
       source package.

   Crypt::SSLeay via Makefile.PL
       "Makefile.PL" accepts the following command line arguments:

       "incpath"
           Path to OpenSSL headers. Can also be specified via $ENV{OPENSSL_INCLUDE}.  If the
           command line argument is provided, it overrides any value specified via the
           environment variable. Of course, you can ignore both the command line argument and the
           environment variable, and just add the path to your compiler specific environment
           variable such as "CPATH" or "INCLUDE" etc.

       "libpath"
           Path to OpenSSL libraries. Can also be specified via $ENV{OPENSSL_LIB}.  If the
           command line argument is provided, it overrides any value specified by the environment
           variable. Of course, you can ignore both the command line argument and the environment
           variable and just add the path to your compiler specific environment variable such as
           "LIBRARY_PATH" or "LIB" etc.

       "live-tests"
           Use "--live-tests" to request tests that try to connect to an external web site, and
           "--no-live_tests" to prevent such tests from running. If you run "Makefile.PL"
           interactively, and this argument is not specified on the command line, you will be
           prompted for a value.

           Default is false.

       "static"
           Boolean. Default is false. TODO: Does it work?

       "verbose"
           Boolean. Default is false. If you pass "--verbose" on the command line, both
           "Devel::CheckLib" and "ExtUtils::CBuilder" instances will be configured to echo what
           they are doing.

       If everything builds OK, but you get failures when during tests, ensure that
       "LD_LIBRARY_PATH" points to the location where the correct shared libraries are located.

       If you are using a custom OpenSSL build, please keep in mind that "Crypt::SSLeay" must be
       built using the same compiler and build tools used to build "perl" and OpenSSL. This can
       be more of an issue on Windows. If you are using Active State Perl, install the MinGW
       package distributed by them, and build OpenSSL using that before trying to build this
       module. If you have built your own Perl using Microsoft SDK tools or IDEs, make sure you
       build OpenSSL using the same tools.

       Depending on your OS, pre-built OpenSSL packages may be available. To get the require
       headers and import libraries, you may need to install a development version of your
       operating system's OpenSSL library package. The key is that "Crypt::SSLeay" makes calls to
       the OpenSSL library, and how to do so is specified in the C header files that come with
       the library. Some systems break out the header files into a separate package from that of
       the libraries. Once the program has been built, you don't need the headers any more.

   Crypt::SSLeay
       The latest Crypt::SSLeay can be found at your nearest CPAN mirror, as well as
       <https://metacpan.org/pod/Crypt::SSLeay>.

       Once you have downloaded it, "Crypt::SSLeay" installs easily using the standard build
       process:

           $ perl Makefile.PL
           $ make
           $ make test
           $ make install

       or

           $ cpanm Crypt::SSLeay

       If you have OpenSSL headers and libraries in nonstandard locations, you can use

           $ perl Makefile.PL --incpath=... --libpath=...

       If you would like to use "cpanm" with such custom locations, you can do

           $ OPENSSL_INCLUDE=... OPENSSL_LIB=... cpanm Crypt::SSLeay

       For example, on OS X (Mac) with Homebrew:

           $ brew install openssl
           $ OPENSSL_INCLUDE=$(brew --prefix openssl)/include OPENSSL_LIB=$(brew --prefix openssl)/lib cpanm Crypt::SSLeay

       or, on Windows,

           > set OPENSSL_INCLUDE=...
           > set OPENSSL_LIB=...
           > cpanm Crypt::SSLeay

       If you are on Windows, and using a MinGW distribution bundled with ActiveState Perl or
       Strawberry Perl, you would use "dmake" rather than "make". If you are using Microsoft's
       build tools, you would use "nmake".

       For unattended (batch) installations, to be absolutely certain that Makefile.PL does not
       prompt for questions on STDIN, set the environment variable "PERL_MM_USE_DEFAULT=1" as
       with any CPAN module built using ExtUtils::MakeMaker.

       VMS

       I do not have any experience with VMS. If OpenSSL headers and libraries are not in
       standard locations searched by your build system by default, please set things up so that
       they are. If you have generic instructions on how to do it, please open a ticket on RT
       with the information so I can add it to this document.

PROXY SUPPORT

       LWP::UserAgent and Crypt::SSLeay have their own versions of proxy support. Please read
       these sections to see which one is appropriate.

   LWP::UserAgent proxy support
       "LWP::UserAgent" has its own methods of proxying which may work for you and is likely to
       be incompatible with "Crypt::SSLeay" proxy support.  To use "LWP::UserAgent" proxy
       support, try something like:

           my $ua = LWP::UserAgent->new;
           $ua->proxy([qw( https http )], "$proxy_ip:$proxy_port");

       At the time of this writing, libwww v5.6 seems to proxy https requests fine with an Apache
       mod_proxy server.  It sends a line like:

           GET https://www.example.com HTTP/1.1

       to the proxy server, which is not the "CONNECT" request that some proxies would expect, so
       this may not work with other proxy servers than mod_proxy. The "CONNECT" method is used by
       "Crypt::SSLeay"'s internal proxy support.

   Crypt::SSLeay proxy support
       For native "Crypt::SSLeay" proxy support of https requests, you need to set the
       environment variable "HTTPS_PROXY" to your proxy server and port, as in:

           # proxy support
           $ENV{HTTPS_PROXY} = 'http://proxy_hostname_or_ip:port';
           $ENV{HTTPS_PROXY} = '127.0.0.1:8080';

       Use of the "HTTPS_PROXY" environment variable in this way is similar to
       "LWP::UserAgent-"env_proxy()> usage, but calling that method will likely override or break
       the "Crypt::SSLeay" support, so do not mix the two.

       Basic auth credentials to the proxy server can be provided this way:

           # proxy_basic_auth
           $ENV{HTTPS_PROXY_USERNAME} = 'username';
           $ENV{HTTPS_PROXY_PASSWORD} = 'password';

       For an example of LWP scripting with "Crypt::SSLeay" native proxy support, please look at
       the eg/lwp-ssl-test script in the "Crypt::SSLeay" distribution.

CLIENT CERTIFICATE SUPPORT

       Client certificates are supported. PEM encoded certificate and private key files may be
       used like this:

           $ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
           $ENV{HTTPS_KEY_FILE}  = 'certs/notacakeynopass.pem';

       You may test your files with the eg/net-ssl-test program, bundled with the distribution,
       by issuing a command like:

           perl eg/net-ssl-test -cert=certs/notacacert.pem \
               -key=certs/notacakeynopass.pem -d GET $HOST_NAME

       Additionally, if you would like to tell the client where the CA file is, you may set
       these.

           $ENV{HTTPS_CA_FILE} = "some_file";
           $ENV{HTTPS_CA_DIR}  = "some_dir";

       Note that, if specified, $ENV{HTTPS_CA_FILE} must point to the actual certificate file.
       That is, $ENV{HTTPS_CA_DIR} is *not* the path were $ENV{HTTPS_CA_FILE} is located.

       For certificates in $ENV{HTTPS_CA_DIR} to be picked up, follow the instructions on
       <http://www.openssl.org/docs/ssl/SSL_CTX_load_verify_locations.html>

       There is no sample CA cert file at this time for testing, but you may configure
       eg/net-ssl-test to use your CA cert with the -CAfile option.

       (TODO: then what is the ./certs directory in the distribution?)

   Creating a test certificate
       To create simple test certificates with OpenSSL, you may run the following command:

           openssl req -config /usr/local/openssl/openssl.cnf \
               -new -days 365 -newkey rsa:1024 -x509 \
               -keyout notacakey.pem -out notacacert.pem

       To remove the pass phrase from the key file, run:

           openssl rsa -in notacakey.pem -out notacakeynopass.pem

   PKCS12 support
       The directives for enabling use of PKCS12 certificates is:

           $ENV{HTTPS_PKCS12_FILE}     = 'certs/pkcs12.pkcs12';
           $ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';

       Use of this type of certificate takes precedence over previous certificate settings
       described.

       (TODO: unclear? Meaning "the presence of this type of certificate"?)

SSL versions

       "Crypt::SSLeay" tries very hard to connect to any SSL web server accommodating servers
       that are buggy, old or simply not standards-compliant.  To this effect, this module will
       try SSL connections in this order:

       SSL v23
           should allow v2 and v3 servers to pick their best type

       SSL v3
           best connection type

       SSL v2
           old connection type

       Unfortunately, some servers seem not to handle a reconnect to SSL v3 after a failed
       connect of SSL v23 is tried, so you may set before using LWP or Net::SSL:

           $ENV{HTTPS_VERSION} = 3;

       to force a version 3 SSL connection first. At this time only a version 2 SSL connection
       will be tried after this, as the connection attempt order remains unchanged by this
       setting.

ACKNOWLEDGEMENTS

       Many thanks to the following individuals who helped improve "Crypt-SSLeay":

       Gisle Aas for writing this module and many others including libwww, for perl. The web will
       never be the same :)

       Ben Laurie deserves kudos for his excellent patches for better error handling, SSL
       information inspection, and random seeding.

       Dongqiang Bai for host name resolution fix when using a proxy.

       Stuart Horner of Core Communications, Inc. who found the need for building "--shared"
       OpenSSL libraries.

       Pavel Hlavnicka for a patch for freeing memory when using a pkcs12 file, and for inspiring
       more robust "read()" behavior.

       James Woodyatt is a champ for finding a ridiculous memory leak that has been the bane of
       many a Crypt::SSLeay user.

       Bryan Hart for his patch adding proxy support, and thanks to Tobias Manthey for submitting
       another approach.

       Alex Rhomberg for Alpha linux ccc patch.

       Tobias Manthey for his patches for client certificate support.

       Daisuke Kuroda for adding PKCS12 certificate support.

       Gamid Isayev for CA cert support and insights into error messaging.

       Jeff Long for working through a tricky CA cert SSLClientVerify issue.

       Chip Turner for a patch to build under perl 5.8.0.

       Joshua Chamas for the time he spent maintaining the module.

       Jeff Lavallee for help with alarms on read failures (CPAN bug #12444).

       Guenter Knauf for significant improvements in configuring things in Win32 and Netware
       lands and Jan Dubois for various suggestions for improvements.

       and many others who provided bug reports, suggestions, fixes and patches.

       If you have reported a bug or provided feedback, and you would like to be mentioned by
       name in this section, please file request on rt.cpan.org
       <http://rt.cpan.org/NoAuth/Bugs.html?Dist=Crypt-SSLeay>.

SEE ALSO

       Net::SSL
           If you have downloaded this distribution as of a dependency of another distribution,
           it's probably due to this module (which is included in this distribution).

       Net::SSLeay
           Net::SSLeay provides access to the OpenSSL API directly from Perl. See
           <https://metacpan.org/pod/Net::SSLeay/>.

       Building OpenSSL on 64-bit Windows 8.1 Pro using SDK tools
           My blog post
           <http://blog.nu42.com/2014/04/building-openssl-101g-on-64-bit-windows.html> might be
           helpful.

SUPPORT

       For issues related to using of "Crypt::SSLeay" & "Net::SSL" with Perl's LWP, please send
       email to "libwww@perl.org".

       For OpenSSL or general SSL support, including issues associated with building and
       installing OpenSSL on your system, please email the OpenSSL users mailing list at
       "openssl-users@openssl.org". See <http://www.openssl.org/support/community.html> for other
       mailing lists and archives.

       Please report all bugs using rt.cpan.org <http://rt.cpan.org/NoAuth/Bugs.html?Dist=Crypt-
       SSLeay>.

AUTHORS

       This module was originally written by Gisle Aas, and was subsequently maintained by Joshua
       Chamas, David Landgren, brian d foy and Sinan Unur.

COPYRIGHT

       Copyright (c) 2010-2014 A. Sinan Unur

       Copyright (c) 2006-2007 David Landgren

       Copyright (c) 1999-2003 Joshua Chamas

       Copyright (c) 1998 Gisle Aas

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       Artistic License 2.0 (see <http://www.perlfoundation.org/artistic_license_2_0>).