Provided by: sympa_6.2.40~dfsg-1_amd64 bug

NAME

       list_config - Configuration file for mailing list

DESCRIPTION

       config is main configuration file of the mailing list.

       Format of config is as following:

       ·   Lines beginning with "#" and containing only spaces are ignored.

       ·   There are parameters with single line and multiple lines:

           ·   On single line parameters, each line has the form "parameter value".  value may
               contain spaces but may not contain newlines.

               Several parameters may have multiple values.  If it's the case, values may be
               separated by comma (",") or parameter lines may be repeated.  Some of parameters
               must have one or more of limited values.

               Example:

                 subject This is subject of my list

                 remove_headers User-Agent,Importance

                 custom_headers X-List: mylist
                 custom_headers X-Face: %`-W7!?^]Sg'I-K>P<cdn&k:~A^{x>(]Gc{V...

                 rfc2369_header_fields post,owner

           ·   A multiple line parameter, so-called "paragraph", consists of the first line
               specifying parameter name and subsequent one or more sub-parameter lines.
               Paragraph must be separated by one or more empty lines from the other parameters.

               Several multiple line parameters may occur multiple times.

PARAMETERS

       Below is entire list of configuration parameters.  "Default" is built-in default value if
       any.

   List definition
       "subject"

       Subject of the list

       Format:
           /".+"/

       Default:
           None, mandatory.

       This parameter indicates the subject of the list, which is sent in response to the LISTS
       mail command. The subject is a free form text limited to one line.

       "visibility"

       Visibility of the list

       Format:
           Name of "visibility" scenario:

           "conceal" - conceal except for subscribers
           "intranet" - intranet access
           "noconceal" - no conceal
           "secret" - conceal even for subscribers
       Default:
           "default"

       This parameter indicates whether the list should feature in the output generated in
       response to a LISTS command or should be shown in the list overview of the web-interface.

       "topics"

       Topics for the list

       Format:
           Multiple values allowed, separated by ",".

           List topic.

       Default:
           None.

       This parameter allows the classification of lists. You may define multiple topics as well
       as hierarchical ones. WWSympa's list of public lists uses this parameter.

       "host"

       Deprecated.

       "lang"

       Language of the list

       Format:
           Language tag.

       Default:
           Value of "lang" parameter in sympa.conf or robot.conf.

       This parameter defines the language used for the list. It is used to initialize a user's
       language preference; Sympa command reports are extracted from the associated message
       catalog.

       "family_name"

       Family name

       Format:
           /$family_name/

       Default:
           None.

       "max_list_members"

       Maximum number of list members

       Format:
           Number of list members.

       Default:
           Value of "default_max_list_members" parameter in sympa.conf or robot.conf.

       limit for the number of subscribers. 0 means no limit.

       "priority"

       Priority

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           Value of "default_list_priority" parameter in sympa.conf or robot.conf.

       The priority with which Sympa will process messages for this list. This level of priority
       is applied while the message is going through the spool. The z priority will freeze the
       message in the spool.

   Sending/receiving setup
       "send"

       Who can send messages

       Format:
           Name of "send" scenario:

           "closed" - closed
           "confidential" - restricted to subscribers, messages from others are discarded
           "editordkim" - Moderated, no authentication needed if DKIM signature from moderator is
           OK
           "editorkey" - Moderated
           "editorkeyonly" - Moderated, even for moderators
           "editorkeyonlyauth" - Moderated, need authentication from moderator
           "intranet" - restricted to local domain
           "intranetorprivate" - restricted to local domain and subscribers
           "newsletter" - Newsletter, restricted to moderators
           "newsletterkeyonly" - Newsletter, restricted to moderators after confirmation
           "owner" - Restricted to list owners only
           "ownerauth" - Restricted to list owners with previous MD5 authentication
           "private" - restricted to subscribers
           "private_smime" - restricted to subscribers and checked smime signature
           "privateandeditorkey" - Moderated, restricted to subscribers
           "privateandnomultipartoreditorkey" - Moderated, for non subscribers sending multipart
           messages
           "privatekey" - restricted to subscribers with previous md5 authentication
           "privatekeyandeditorkeyonly" - Moderated, for subscribers and even moderators themself
           "privateoreditorkey" - Private, moderated for non subscribers
           "privateorpublickey" - Private, confirmation for non subscribers
           "public" - public list
           "public_nobcc" - public list, Bcc rejected (anti-spam)
           "publickey" - anyone no authentication if DKIM signature is OK
           "publicnoattachment" - public list multipart/mixed messages are forwarded to moderator
           "publicnomultipart" - public list multipart messages are rejected
       Default:
           "default"

       This parameter specifies who can send messages to the list.

       "delivery_time"

       Delivery time (hh:mm)

       Format:
           /"[0-2]?\d\:[0-6]\d"/

       Default:
           None.

       If this parameter is present, non-digest messages will be delivered to subscribers at this
       time: When this time has been past, delivery is postponed to the same time in next day.

       "digest"

       Digest frequency

       Single occurrence

       Definition of digest mode. If this parameter is present, subscribers can select the option
       of receiving messages in multipart/digest MIME format, or as a plain text digest. Messages
       are then grouped together, and compiled messages are sent to subscribers according to the
       frequency selected with this parameter.

       "digest.days"

       days

       Format:
           Multiple occurrences allowed.

           Day of week, 0 - 6.

       Default:
           None, mandatory.

       "digest.hour"

       hour

       Format:
           /"\d+"/

       Default:
           None, mandatory.

       "digest.minute"

       minute

       Format:
           /"\d+"/

       Default:
           None, mandatory.

       "digest_max_size"

       Digest maximum number of messages

       Format:
           Number of messages.

       Default:
           25

       "available_user_options"

       Available subscription options

       Single occurrence

       "available_user_options.reception"

       reception mode

       Format:
           Multiple values allowed, separated by ",".

           Reception mode of list member.

       Default:
           "mail,notice,digest,digestplain,summary,nomail,txt,urlize,not_me"

       Only these modes will be allowed for the subscribers of this list. If a subscriber has a
       reception mode not in the list, Sympa uses the mode specified in the default_user_options
       paragraph.

       "default_user_options"

       Subscription profile

       Single occurrence

       Default profile for the subscribers of the list.

       "default_user_options.reception"

       reception mode

       Format:
           Reception mode of list member.

       Default:
           "mail"

       Mail reception mode.

       "default_user_options.visibility"

       visibility

       Format:
           Visibility mode of list memeber.

       Default:
           "noconceal"

       Visibility of the subscriber.

       "msg_topic"

       Topics for message categorization

       Multiple occurrences allowed

       This paragraph defines a topic used to tag a message of a list, named by msg_topic.name
       ("other" is a reserved word), its title is msg_topic.title. The msg_topic.keywords entry
       is optional and allows automatic tagging. This should be a list of keywords, separated by
       ','.

       "msg_topic.name"

       Message topic name

       Format:
           /"[\-\w]+"/

       Default:
           None, mandatory.

       "msg_topic.keywords"

       Message topic keywords

       Format:
           /"[^,\n]+(,[^,\n]+)*"/

       Default:
           None.

       "msg_topic.title"

       Message topic title

       Format:
           /".+"/

       Default:
           None, mandatory.

       "msg_topic_keywords_apply_on"

       Defines to which part of messages topic keywords are applied

       Format:
           "subject" - subject field
           "body" - message body
           "subject_and_body" - subject and body
       Default:
           "subject"

       This parameter indicates which part of the message is used to perform automatic tagging.

       "msg_topic_tagging"

       Message tagging

       Format:
           "required_sender" - required to post message
           "required_moderator" - required to distribute message
           "optional" - optional
       Default:
           "optional"

       This parameter indicates if the tagging is optional or required for a list.

       "reply_to_header"

       Reply address

       Single occurrence

       This defines what Sympa will place in the Reply-To: SMTP header field of the messages it
       distributes.

       "reply_to_header.value"

       value

       Format:
           "sender" - sender
           "list" - list
           "all" - all
           "other_email" - other email address
       Default:
           "sender"

       This parameter indicates whether the Reply-To: field should indicate the sender of the
       message (sender), the list itself (list), both list and sender (all) or an arbitrary
       e-mail address (defined by the other_email parameter).

       Note: it is inadvisable to change this parameter, and particularly inadvisable to set it
       to list. Experience has shown it to be almost inevitable that users, mistakenly believing
       that they are replying only to the sender, will send private messages to a list. This can
       lead, at the very least, to embarrassment, and sometimes to more serious consequences.

       "reply_to_header.other_email"

       other email address

       Format:
           /$email/

       Default:
           None.

       If value was set to other_email, this parameter defines the e-mail address used.

       "reply_to_header.apply"

       respect of existing header field

       Format:
           "forced" - overwrite Reply-To: header field
           "respect" - preserve existing header field
       Default:
           "respect"

       The default is to respect (preserve) the existing Reply-To: SMTP header field in incoming
       messages. If set to forced, Reply-To: SMTP header field will be overwritten.

       "anonymous_sender"

       Anonymous sender

       Format:
           /".+"/

       Default:
           None.

       To hide the sender's email address before distributing the message. It is replaced by the
       provided email address.

       "custom_header"

       Custom header field

       Format:
           Multiple occurrences allowed.

           /"\S+:\s+.*"/

       Default:
           None.

       This parameter is optional. The headers specified will be added to the headers of messages
       distributed via the list. As of release 1.2.2 of Sympa, it is possible to put several
       custom header lines in the configuration file at the same time.

       "custom_subject"

       Subject tagging

       Format:
           /".+"/

       Default:
           None.

       This parameter is optional. It specifies a string which is added to the subject of
       distributed messages (intended to help users who do not use automatic tools to sort
       incoming messages). This string will be surrounded by [] characters.

       "footer_type"

       Attachment type

       Format:
           "mime" - add a new MIME part
           "append" - append to message body
       Default:
           "mime"

       List owners may decide to add message headers or footers to messages sent via the list.
       This parameter defines the way a footer/header is added to a message.

       mime:

       The default value. Sympa will add the footer/header as a new MIME part.

       append:

       Sympa will not create new MIME parts, but will try to append the header/footer to the body
       of the message. Predefined message-footers will be ignored. Headers/footers may be
       appended to text/plain messages only.

       "max_size"

       Maximum message size

       Format:
           Number of bytes.

       Default:
           Value of "max_size" parameter in sympa.conf or robot.conf.

       Maximum size of a message in 8-bit bytes.

       "merge_feature"

       Allow message personalization

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "merge_feature" parameter in sympa.conf.

       "message_hook"

       Hook modules for message processing

       Single occurrence

       "message_hook.pre_distribute"

       A hook on the messages before distribution

       Format:
           /"(::|\w)+"/

       Default:
           None.

       "message_hook.post_archive"

       A hook on the messages just after archiving

       Format:
           /"(::|\w)+"/

       Default:
           None.

       "reject_mail_from_automates_feature"

       Reject mail from automatic processes (crontab, etc)?

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "reject_mail_from_automates_feature" parameter in sympa.conf.

       "remove_headers"

       Incoming SMTP header fields to be removed

       Format:
           Multiple values allowed, separated by ",".

           /"\S+"/

       Default:
           Value of "remove_headers" parameter in sympa.conf.

       "remove_outgoing_headers"

       Outgoing SMTP header fields to be removed

       Format:
           Multiple values allowed, separated by ",".

           /"\S+"/

       Default:
           Value of "remove_outgoing_headers" parameter in sympa.conf.

       "rfc2369_header_fields"

       RFC 2369 Header fields

       Format:
           Multiple values allowed, separated by ",".

           "help" - help
           "subscribe" - subscription
           "unsubscribe" - unsubscription
           "post" - posting address
           "owner" - owner
           "archive" - list archive
       Default:
           Value of "rfc2369_header_fields" parameter in sympa.conf.

       "forced_reply_to"

       Deprecated.

       "reply_to"

       Deprecated.

   Privileges
       "info"

       Who can view list information

       Format:
           Name of "info" scenario:

           "conceal" - restricted to subscribers - Silent rejection otherwise.
           "open" - for anyone
           "private" - restricted to subscribers
       Default:
           "default"

       "subscribe"

       Who can subscribe to the list

       Format:
           Name of "subscribe" scenario:

           "auth" - subscription request confirmed
           "auth_notify" - need authentication (notification is sent to owners)
           "auth_notifydkim" - need authentication unless DKIM signature is OK (notification is
           sent to owners)
           "auth_owner" - requires authentication then owner approval
           "auth_ownerdkim" - requires authentication unless DKIM signature is OK, then owner
           approval
           "authdkim" - subscription request confirmed
           "closed" - subscription is impossible
           "intranet" - restricted to local domain users
           "intranetorowner" - local domain users or owner approval
           "open" - for anyone without authentication
           "open_notify" - anyone, notification is sent to list owner
           "open_quiet" - anyone, no welcome message
           "owner" - owners approval
           "smime" - requires S/MIME signed
           "smimeorowner" - requires S/MIME signed or owner approval
       Default:
           "default"

       The subscribe parameter defines the rules for subscribing to the list.

       "add"

       Who can add subscribers

       Format:
           Name of "add" scenario:

           "auth" - restricted to owner with authentication
           "authdkim" - restricted to owner without authentication if DKIM signature is OK.
           "closed" - add impossible
           "owner" - add performed by list owner does not need authentication
           "owner_notify" - add performed by owner does not need authentication (notification)
           "ownerdkim" - add performed by list owner does not need authentication if DKIM
           signature OK
       Default:
           "default"

       Privilege for adding (ADD command) a subscriber to the list

       "unsubscribe"

       Who can unsubscribe

       Format:
           Name of "unsubscribe" scenario:

           "auth" - need authentication
           "auth_notify" - authentication requested, notification sent to owner
           "auth_notifydkim" - authentication requested unless DKIM signature is OK, notification
           sent to owner
           "authdkim" - need authentication unless DKIM signature is OK
           "closed" - impossible
           "open" - open
           "open_notify" - open with mail confirmation, owner is notified
           "owner" - owners approval
       Default:
           "default"

       This parameter specifies the unsubscription method for the list. Use open_notify or
       auth_notify to allow owner notification of each unsubscribe command.

       "del"

       Who can delete subscribers

       Format:
           Name of "del" scenario:

           "auth" - deletion performed only by list owners, need authentication
           "authdkim" - deletion performed only by list owners, need authentication unless DKIM
           signature is OK
           "closed" - remove subscriber impossible
           "owner" - by owner without authentication
           "owner_notify" - list owners, authentication not needed (notification)
           "ownerdkim" - by owner without authentication if DKIM signature OK
       Default:
           "default"

       "invite"

       Who can invite people

       Format:
           Name of "invite" scenario:

           "closed" - closed
           "owner" - invite perform by list owner do not need authentication
           "private" - restricted to subscribers
           "public" - public
       Default:
           "default"

       "remind"

       Who can start a remind process

       Format:
           Name of "remind" scenario:

           "listmaster" - listmaster only
           "listmasterdkim" - listmaster only (do not require authentication if DKIM siganture is
           OK)
           "owner" - restricted to list owners
           "ownerdkim" - restricted to list owners (authentication is not required if a DKIM
           signature is OK)
       Default:
           "default"

       This parameter specifies who is authorized to use the remind command.

       "review"

       Who can review subscribers

       Format:
           Name of "review" scenario:

           "closed" - no one can review
           "intranet" - restricted to subscribers or local domain users
           "listmaster" - listmaster only
           "owner" - only owner (and listmaster)
           "private" - restricted to subscribers
           "public" - anyone can do it!
       Default:
           "default"

       This parameter specifies who can access the list of members. Since subscriber addresses
       can be abused by spammers, it is strongly recommended that you only authorize owners or
       subscribers to access the subscriber list.

       "owner_domain"

       Required domains for list owners

       Format:
           /"$host( +$host)*"/

       Default:
           Value of "owner_domain" parameter in sympa.conf or robot.conf.

       Restrict list ownership to addresses in the specified domains.

       "owner_domain_min"

       Minimum owners in required domains

       Format:
           /"\d+"/

       Default:
           Value of "owner_domain_min" parameter in sympa.conf or robot.conf.

       Require list ownership by a minimum number of addresses in the specified domains.

       "shared_doc"

       Shared documents

       Single occurrence

       This paragraph defines read and edit access to the shared document repository.

       "shared_doc.d_read"

       Who can view

       Format:
           Name of "d_read" scenario:

           "owner" - restricted to list owners
           "private" - restricted to subscribers
           "private-https" - restricted to subscribers authenticated with user cert
           "public" - public documents
       Default:
           "default"

       "shared_doc.d_edit"

       Who can edit

       Format:
           Name of "d_edit" scenario:

           "editor" - moderated for subscribers
           "owner" - restricted to list owners
           "private" - restricted to subscribers
           "private-https" - restricted to subscribers authenticated with user cert
           "public" - public documents
       Default:
           "default"

       "shared_doc.quota"

       quota

       Format:
           Number of Kbytes.

       Default:
           Value of "default_shared_quota" parameter in sympa.conf or robot.conf.

   Archives
       "process_archive"

       Store distributed messages into archive

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "process_archive" parameter in sympa.conf or robot.conf.

       "archive"

       Archives

       Single occurrence

       Privilege for reading mail archives and frequency of archiving.

       Defines who can access the list's web archive.

       "archive.period"

       Deprecated.

       "archive.access"

       Deprecated.

       "archive.web_access"

       access right

       Format:
           Name of "archive_web_access" scenario:

           "closed" - closed
           "intranet" - restricted to local domain users
           "listmaster" - listmaster
           "owner" - by owner
           "private" - subscribers only
           "public" - public
       Default:
           None.

       "archive.mail_access"

       access right by mail commands

       Format:
           Name of "archive_mail_access" scenario:

           "closed" - closed
           "owner" - by owner
           "private" - subscribers only
           "public" - public
       Default:
           "default"

       "archive.quota"

       quota

       Format:
           Number of Kbytes.

       Default:
           Value of "default_archive_quota" parameter in sympa.conf.

       "archive.max_month"

       Maximum number of month archived

       Format:
           Number of months.

       Default:
           None.

       "archive_crypted_msg"

       Archive encrypted mails as cleartext

       Format:
           "original" - original messages
           "decrypted" - decrypted messages
       Default:
           "original"

       "web_archive_spam_protection"

       email address protection method

       Format:
           "cookie" - use HTTP cookie
           "javascript" - use JavaScript
           "at" - replace @ characters
           "none" - do nothing
       Default:
           Value of "web_archive_spam_protection" parameter in sympa.conf or robot.conf.

       Idem spam_protection is provided but it can be used only for web archives. Access requires
       a cookie, and users must submit a small form in order to receive a cookie before browsing
       the archives. This blocks all robot, even google and co.

       "web_archive"

       Deprecated.

   Bounces
       "bounce"

       Bounces management

       Single occurrence

       "bounce.warn_rate"

       warn rate

       Format:
           Number of %.

       Default:
           Value of "bounce_warn_rate" parameter in sympa.conf.

       The list owner receives a warning whenever a message is distributed and the number
       (percentage) of bounces exceeds this value.

       "bounce.halt_rate"

       Deprecated.

       "bouncers_level1"

       Management of bouncers, 1st level

       Single occurrence

       Level 1 is the lower level of bouncing users

       "bouncers_level1.rate"

       threshold

       Format:
           Number of points.

       Default:
           Value of "default_bounce_level1_rate" parameter in sympa.conf or robot.conf.

       Each bouncing user have a score (from 0 to 100).

       This parameter defines a lower limit for each category of bouncing users.For example,
       level 1 begins from 45 to level_2_treshold.

       "bouncers_level1.action"

       action for this population

       Format:
           "remove_bouncers" - remove bouncing users
           "notify_bouncers" - send notify to bouncing users
           "none" - do nothing
       Default:
           "notify_bouncers"

       This parameter defines which task is automatically applied on level 1 bouncers.

       "bouncers_level1.notification"

       notification

       Format:
           "none" - do nothing
           "owner" - owner
           "listmaster" - listmaster
       Default:
           "owner"

       When automatic task is executed on level 1 bouncers, a notification email can be send to
       listowner or listmaster.

       "bouncers_level2"

       Management of bouncers, 2nd level

       Single occurrence

       Level 2 is the highest level of bouncing users

       "bouncers_level2.rate"

       threshold

       Format:
           Number of points.

       Default:
           Value of "default_bounce_level2_rate" parameter in sympa.conf or robot.conf.

       Each bouncing user have a score (from 0 to 100).

       This parameter defines the score range defining each category of bouncing users.For
       example, level 2 is for users with a score between 80 and 100.

       "bouncers_level2.action"

       action for this population

       Format:
           "remove_bouncers" - remove bouncing users
           "notify_bouncers" - send notify to bouncing users
           "none" - do nothing
       Default:
           "remove_bouncers"

       This parameter defines which task is automatically applied on level 2 bouncers.

       "bouncers_level2.notification"

       notification

       Format:
           "none" - do nothing
           "owner" - owner
           "listmaster" - listmaster
       Default:
           "owner"

       When automatic task is executed on level 2 bouncers, a notification email can be send to
       listowner or listmaster.

       "verp_rate"

       percentage of list members in VERP mode

       Format:
           "100%" - 100% - always
           "50%" - 50%
           "33%" - 33%
           "25%" - 25%
           "20%" - 20%
           "10%" - 10%
           "5%" - 5%
           "2%" - 2%
           "0%" - 0% - never
       Default:
           Value of "verp_rate" parameter in sympa.conf or robot.conf.

       "tracking"

       Message tracking feature

       Single occurrence

       "tracking.delivery_status_notification"

       tracking message by delivery status notification

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "tracking_delivery_status_notification" parameter in sympa.conf.

       "tracking.message_disposition_notification"

       tracking message by message disposition notification

       Format:
           "on" - enabled
           "on_demand" - on demand
           "off" - disabled
       Default:
           Value of "tracking_message_disposition_notification" parameter in sympa.conf.

       "tracking.tracking"

       who can view message tracking

       Format:
           Name of "tracking" scenario:

           "owner" - only owner (and listmaster)
           "private" - restricted to subscribers
       Default:
           "default"

       "tracking.retention_period"

       Tracking datas are removed after this number of days

       Format:
           Number of days.

       Default:
           Value of "tracking_default_retention_period" parameter in sympa.conf.

       "welcome_return_path"

       Welcome return-path

       Format:
           "unique" - bounce management
           "owner" - owner
       Default:
           Value of "welcome_return_path" parameter in sympa.conf.

       If set to unique, the welcome message is sent using a unique return path in order to
       remove the subscriber immediately in the case of a bounce.

       "remind_return_path"

       Return-path of the REMIND command

       Format:
           "unique" - bounce management
           "owner" - owner
       Default:
           Value of "remind_return_path" parameter in sympa.conf.

       Same as welcome_return_path, but applied to remind messages.

   Data sources setup
       "inclusion_notification_feature"

       Notify subscribers when they are included from a data source?

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       "member_include"

       Subscribers defined in an external data source

       Multiple occurrences allowed

       "member_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       "member_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       "owner_include"

       Owners defined in an external data source

       Multiple occurrences allowed

       "owner_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       "owner_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       "owner_include.profile"

       profile

       Format:
           "privileged" - privileged owner
           "normal" - normal owner
       Default:
           "normal"

       "owner_include.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           "mail"

       "owner_include.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           "noconceal"

       "editor_include"

       Moderators defined in an external data source

       Multiple occurrences allowed

       "editor_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       "editor_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       "editor_include.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           "mail"

       "editor_include.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           "noconceal"

       "sql_fetch_timeout"

       Timeout for fetch of include_sql_query

       Format:
           Number of seconds.

       Default:
           Value of "default_sql_fetch_timeout" parameter in sympa.conf.

       "include_file"

       File inclusion

       Format:
           Multiple occurrences allowed.

           /"\S+"/

       Default:
           None.

       Include subscribers from this file.  The file should contain one e-mail address per line
       (lines beginning with a "#" are ignored).

       "include_remote_file"

       Remote file inclusion

       Multiple occurrences allowed

       "include_remote_file.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_remote_file.url"

       data location URL

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_remote_file.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       "include_remote_file.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_sympa_list"

       List inclusion

       Multiple occurrences allowed

       Include subscribers from other list. All subscribers of list listname become subscribers
       of the current list. You may include as many lists as required, using one
       include_sympa_list paragraph for each included list. Any list at all may be included; you
       may therefore include lists which are also defined by the inclusion of other lists. Be
       careful, however, not to include list A in list B and then list B in list A, since this
       will give rise to an infinite loop.

       "include_sympa_list.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_sympa_list.listname"

       list name to include

       Format:
           /"$listname(\@$host)?"/

       Default:
           None, mandatory.

       "include_sympa_list.filter"

       filter definition

       Format:
           /".*"/

       Default:
           None.

       "include_remote_sympa_list"

       remote list inclusion

       Multiple occurrences allowed

       Sympa can contact another Sympa service using HTTPS to fetch a remote list in order to
       include each member of a remote list as subscriber. You may include as many lists as
       required, using one include_remote_sympa_list paragraph for each included list. Be
       careful, however, not to give rise to an infinite loop resulting from cross includes.

       For this operation, one Sympa site acts as a server while the other one acs as client. On
       the server side, the only setting needed is to give permission to the remote Sympa to
       review the list. This is controlled by the review scenario.

       "include_remote_sympa_list.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_remote_sympa_list.host"

       remote host

       Format:
           /$host/

       Default:
           None, mandatory.

       "include_remote_sympa_list.port"

       remote port

       Format:
           /"\d+"/

       Default:
           443

       "include_remote_sympa_list.path"

       remote path of sympa list dump

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_remote_sympa_list.cert"

       certificate for authentication by remote Sympa

       Format:
           "robot" - robot
           "list" - list
       Default:
           "list"

       "include_ldap_query"

       LDAP query inclusion

       Multiple occurrences allowed

       This paragraph defines parameters for a query returning a list of subscribers. This
       feature requires the Net::LDAP (perlldap) PERL module.

       "include_ldap_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_query.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       "include_ldap_query.port"

       Deprecated.

       "include_ldap_query.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       "include_ldap_query.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       "include_ldap_query.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       "include_ldap_query.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       "include_ldap_query.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_query.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_ldap_query.suffix"

       suffix

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_query.scope"

       search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_query.timeout"

       connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_query.filter"

       filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_query.attrs"

       extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       "include_ldap_query.select"

       selection (if multiple)

       Format:
           "all" - all
           "first" - first entry
       Default:
           "first"

       "include_ldap_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_ldap_query.use_ssl"

       Obsoleted. Use "use_tls".

       "include_ldap_2level_query"

       LDAP 2-level query inclusion

       Multiple occurrences allowed

       This paragraph defines parameters for a two-level query returning a list of subscribers.
       Usually the first-level query returns a list of DNs and the second-level queries convert
       the DNs into e-mail addresses. This feature requires the Net::LDAP (perlldap) PERL module.

       "include_ldap_2level_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_query.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       "include_ldap_2level_query.port"

       Deprecated.

       "include_ldap_2level_query.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       "include_ldap_2level_query.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       "include_ldap_2level_query.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       "include_ldap_2level_query.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       "include_ldap_2level_query.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_query.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_ldap_2level_query.suffix1"

       first-level suffix

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_query.scope1"

       first-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_2level_query.timeout1"

       first-level connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_2level_query.filter1"

       first-level filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_2level_query.attrs1"

       first-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           None.

       "include_ldap_2level_query.select1"

       first-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       "include_ldap_2level_query.regex1"

       first-level regular expression

       Format:
           /".+"/

       Default:
           ""

       "include_ldap_2level_query.suffix2"

       second-level suffix template

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_query.scope2"

       second-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_2level_query.timeout2"

       second-level connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_2level_query.filter2"

       second-level filter template

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_2level_query.attrs2"

       second-level extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       "include_ldap_2level_query.select2"

       second-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       "include_ldap_2level_query.regex2"

       second-level regular expression

       Format:
           /".+"/

       Default:
           ""

       "include_ldap_2level_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_ldap_2level_query.use_ssl"

       Obsoleted. Use "use_tls".

       "include_sql_query"

       SQL query inclusion

       Multiple occurrences allowed

       This parameter is used to define the SQL query parameters.

       "include_sql_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_sql_query.db_type"

       database type

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_query.host"

       remote host

       Format:
           /$host/

       Default:
           None.

       "include_sql_query.db_port"

       database port

       Format:
           /"\d+"/

       Default:
           None.

       "include_sql_query.connect_options"

       connection options

       Format:
           /".+"/

       Default:
           None.

       "include_sql_query.db_name"

       database name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_query.db_env"

       environment variables for database connection

       Format:
           /"\w+\=\S+(;\w+\=\S+)*"/

       Default:
           None.

       "include_sql_query.user"

       remote user

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_query.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_sql_query.sql_query"

       SQL query

       Format:
           /$sql_query/

       Default:
           None, mandatory.

       "include_sql_query.f_dir"

       Directory where the database is stored (used for DBD::CSV only)

       Format:
           /".+"/

       Default:
           None.

       "include_sql_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_voot_group"

       VOOT group inclusion

       Multiple occurrences allowed

       "include_voot_group.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_voot_group.user"

       user

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_voot_group.provider"

       provider

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_voot_group.group"

       group

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "ttl"

       Inclusions timeout

       Format:
           Number of seconds.

       Default:
           Value of "default_ttl" parameter in sympa.conf.

       Sympa caches user data extracted using the include parameter. Their TTL (time-to-live)
       within Sympa can be controlled using this parameter. The default value is 3600

       "distribution_ttl"

       Inclusions timeout for message distribution

       Format:
           Number of seconds.

       Default:
           None.

       This parameter defines the delay since the last synchronization after which the user's
       list will be updated before performing either of following actions:

       * Reviewing list members

       * Message distribution

       "include_ldap_ca"

       LDAP query custom attribute

       Multiple occurrences allowed

       "include_ldap_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_ca.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       "include_ldap_ca.port"

       Deprecated.

       "include_ldap_ca.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       "include_ldap_ca.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       "include_ldap_ca.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       "include_ldap_ca.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       "include_ldap_ca.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_ca.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_ldap_ca.suffix"

       suffix

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_ca.scope"

       search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_ca.timeout"

       connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_ca.filter"

       filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_ca.attrs"

       extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       "include_ldap_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_ldap_ca.select"

       selection (if multiple)

       Format:
           "all" - all
           "first" - first entry
       Default:
           "first"

       "include_ldap_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_ldap_ca.use_ssl"

       Obsoleted. Use "use_tls".

       "include_ldap_2level_ca"

       LDAP 2-level query custom attribute

       Multiple occurrences allowed

       "include_ldap_2level_ca.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       "include_ldap_2level_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_ca.port"

       Deprecated.

       "include_ldap_2level_ca.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       "include_ldap_2level_ca.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       "include_ldap_2level_ca.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       "include_ldap_2level_ca.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       "include_ldap_2level_ca.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_ca.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_ldap_2level_ca.suffix1"

       first-level suffix

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_ca.scope1"

       first-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_2level_ca.timeout1"

       first-level connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_2level_ca.filter1"

       first-level filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_2level_ca.attrs1"

       first-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           None.

       "include_ldap_2level_ca.select1"

       first-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       "include_ldap_2level_ca.regex1"

       first-level regular expression

       Format:
           /".+"/

       Default:
           ""

       "include_ldap_2level_ca.suffix2"

       second-level suffix template

       Format:
           /".+"/

       Default:
           None.

       "include_ldap_2level_ca.scope2"

       second-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       "include_ldap_2level_ca.timeout2"

       second-level connection timeout

       Format:
           Number of seconds.

       Default:
           30

       "include_ldap_2level_ca.filter2"

       second-level filter template

       Format:
           /".+"/

       Default:
           None, mandatory.

       "include_ldap_2level_ca.attrs2"

       second-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           "mail"

       "include_ldap_2level_ca.select2"

       second-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       "include_ldap_2level_ca.regex2"

       second-level regular expression

       Format:
           /".+"/

       Default:
           ""

       "include_ldap_2level_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_ldap_2level_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_ldap_2level_ca.use_ssl"

       Obsoleted. Use "use_tls".

       "include_sql_ca"

       SQL query custom attribute

       Multiple occurrences allowed

       "include_sql_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       "include_sql_ca.db_type"

       database type

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_ca.host"

       remote host

       Format:
           /$host/

       Default:
           None.

       "include_sql_ca.db_port"

       database port

       Format:
           /"\d+"/

       Default:
           None.

       "include_sql_ca.db_name"

       database name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_ca.connect_options"

       connection options

       Format:
           /".+"/

       Default:
           None.

       "include_sql_ca.db_env"

       environment variables for database connection

       Format:
           /"\w+\=\S+(;\w+\=\S+)*"/

       Default:
           None.

       "include_sql_ca.user"

       remote user

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_ca.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       "include_sql_ca.sql_query"

       SQL query

       Format:
           /$sql_query/

       Default:
           None, mandatory.

       "include_sql_ca.f_dir"

       Directory where the database is stored (used for DBD::CSV only)

       Format:
           /".+"/

       Default:
           None.

       "include_sql_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "include_sql_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       "include_list"

       Deprecated.

       "user_data_source"

       Deprecated.

   DKIM
       "dkim_feature"

       Insert DKIM signature to messages sent to the list

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "dkim_feature" parameter in sympa.conf or robot.conf.

       Enable/Disable DKIM. This feature requires Mail::DKIM to be installed, and maybe some
       custom scenario to be updated

       "dkim_parameters"

       DKIM configuration

       Single occurrence

       A set of parameters in order to define outgoing DKIM signature

       "dkim_parameters.private_key_path"

       File path for list DKIM private key

       Format:
           /"\S+"/

       Default:
           Value of "dkim_private_key_path" parameter in sympa.conf or robot.conf.

       The file must contain a RSA pem encoded private key

       "dkim_parameters.selector"

       Selector for DNS lookup of DKIM public key

       Format:
           /"\S+"/

       Default:
           Value of "dkim_selector" parameter in sympa.conf or robot.conf.

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       <selector>._domainkey.your_domain

       "dkim_parameters.header_list"

       Deprecated.

       "dkim_parameters.signer_domain"

       DKIM "d=" tag, you should probably use the default value

       Format:
           /"\S+"/

       Default:
           Value of "dkim_signer_domain" parameter in sympa.conf or robot.conf.

       The DKIM "d=" tag, is the domain of the signing entity. The list domain MUST be included
       in the "d=" domain

       "dkim_parameters.signer_identity"

       DKIM "i=" tag, you should probably leave this parameter empty

       Format:
           /"\S+"/

       Default:
           None.

       DKIM "i=" tag, you should probably not use this parameter, as recommended by RFC 4871,
       default for list brodcasted messages is i=<listname>-request@<domain>

       "dkim_signature_apply_on"

       The categories of messages sent to the list that will be signed using DKIM.

       Format:
           Multiple values allowed, separated by ",".

           "md5_authenticated_messages" - authenticated by password
           "smime_authenticated_messages" - authenticated by S/MIME signature
           "dkim_authenticated_messages" - authenticated by DKIM signature
           "editor_validated_messages" - approved by moderator
           "none" - do nothing
           "any" - any messages
       Default:
           Value of "dkim_signature_apply_on" parameter in sympa.conf or robot.conf.

       This parameter controls in which case messages must be signed using DKIM, you may sign
       every message choosing 'any' or a subset. The parameter value is a comma separated list of
       keywords

       "arc_feature"

       Add ARC seals to messages sent to the list

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "arc_feature" parameter in sympa.conf or robot.conf.

       Enable/Disable ARC. This feature requires Mail::DKIM::ARC to be installed, and maybe some
       custom scenario to be updated

       "arc_parameters"

       ARC configuration

       Single occurrence

       A set of parameters in order to define outgoing ARC seal

       "arc_parameters.arc_private_key_path"

       File path for list ARC private key

       Format:
           /"\S+"/

       Default:
           Value of "arc_private_key_path" parameter in sympa.conf or robot.conf.

       The file must contain a RSA pem encoded private key. Default is DKIM private key.

       "arc_parameters.arc_selector"

       Selector for DNS lookup of ARC public key

       Format:
           /"\S+"/

       Default:
           Value of "arc_selector" parameter in sympa.conf or robot.conf.

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       <selector>._domainkey.your_domain.  Default is selector for DKIM signature

       "arc_parameters.arc_signer_domain"

       ARC "d=" tag, you should probably use the default value

       Format:
           /"\S+"/

       Default:
           Value of "arc_signer_domain" parameter in sympa.conf or robot.conf.

       The ARC "d=" tag, is the domain of the sealing entity. The list domain MUST be included in
       the "d=" domain

       "dmarc_protection"

       DMARC Protection

       Single occurrence

       Parameters to define how to manage From address processing to avoid some domains'
       excessive DMARC protection

       "dmarc_protection.mode"

       Protection modes

       Format:
           Multiple values allowed, separated by ",".

           "none" - do nothing
           "all" - all
           "dkim_signature" - DKIM signature exists
           "dmarc_reject" - DMARC policy suggests rejection
           "dmarc_any" - DMARC policy exists
           "dmarc_quarantine" - DMARC policy suggests quarantine
           "domain_regex" - domain matching regular expression
       Default:
           Value of "dmarc_protection_mode" parameter in sympa.conf or robot.conf.

       Select one or more operation modes.  "Domain matching regular expression" (domain_regex)
       matches the specified Domain regular expression; "DKIM signature exists" (dkim_signature)
       matches any message with a DKIM signature header; "DMARC policy ..." (dmarc_*) matches
       messages from sender domains with a DMARC policy as given; "all" (all) matches all
       messages.

       "dmarc_protection.domain_regex"

       Match domain regular expression

       Format:
           /".+"/

       Default:
           Value of "dmarc_protection_domain_regex" parameter in sympa.conf or robot.conf.

       Regular expression match pattern for From domain

       "dmarc_protection.other_email"

       New From address

       Format:
           /".+"/

       Default:
           Value of "dmarc_protection_other_email" parameter in sympa.conf or robot.conf.

       This is the email address to use when modifying the From header.  It defaults to the list
       address.  This is similar to Anonymisation but preserves the original sender details in
       the From address phrase.

       "dmarc_protection.phrase"

       New From name format

       Format:
           "display_name" - "Name"
           "name_and_email" - "Name" (e-mail)
           "name_via_list" - "Name" (via List)
           "name_email_via_list" - "Name" (e-mail via List)
           "list_for_email" - "List" (on behalf of e-mail)
           "list_for_name" - "List" (on behalf of Name)
       Default:
           Value of "dmarc_protection_phrase" parameter in sympa.conf or robot.conf.

       This is the format to be used for the sender name part of the new From header.

   Miscellaneous
       "clean_delay_queuemod"

       Expiration of unmoderated messages

       Format:
           Number of days.

       Default:
           Value of "clean_delay_queuemod" parameter in sympa.conf.

       "cookie"

       Secret string for generating unique keys

       Format:
           The value to be concealed.

       Default:
           Value of "cookie" parameter in sympa.conf.

       This parameter is a confidential item for generating authentication keys for
       administrative commands (ADD, DELETE, etc.). This parameter should remain concealed, even
       for owners. The cookie is applied to all list owners, and is only taken into account when
       the owner has the auth parameter.

       "custom_attribute"

       Custom user attributes

       Multiple occurrences allowed

       "custom_attribute.id"

       internal identifier

       Format:
           /"\w+"/

       Default:
           None, mandatory.

       "custom_attribute.name"

       label

       Format:
           /".+"/

       Default:
           None, mandatory.

       "custom_attribute.comment"

       additional comment

       Format:
           /".+"/

       Default:
           None.

       "custom_attribute.type"

       type

       Format:
           "string" - string
           "text" - multi-line text
           "integer" - number
           "enum" - set of keywords
       Default:
           "string"

       "custom_attribute.enum_values"

       possible attribute values (if enum is used)

       Format:
           /".+"/

       Default:
           None.

       "custom_attribute.optional"

       is the attribute optional?

       Format:
           "required" - required
           "optional" - optional
       Default:
           "optional"

       "custom_vars"

       custom parameters

       Multiple occurrences allowed

       "custom_vars.name"

       var name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       "custom_vars.value"

       var value

       Format:
           /".+"/

       Default:
           None, mandatory.

       "expire_task"

       Deprecated.

       "loop_prevention_regex"

       Regular expression applied to prevent loops with robots

       Format:
           /"\S*"/

       Default:
           Value of "loop_prevention_regex" parameter in sympa.conf or robot.conf.

       "pictures_feature"

       Allow picture display? (must be enabled for the current robot)

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           Value of "pictures_feature" parameter in sympa.conf or robot.conf.

       "remind_task"

       Periodical subscription reminder task

       Format:
           /"\w+"/

       Default:
           Value of "default_remind_task" parameter in sympa.conf.

       This parameter states which model is used to create a remind task. A remind task regularly
       sends  subscribers a message which reminds them of their list subscriptions.

       "spam_protection"

       email address protection method

       Format:
           "at" - replace @ characters
           "javascript" - use JavaScript
           "none" - do nothing
       Default:
           "javascript"

       There is a need to protect Sympa web sites against spambots which collect email addresses
       from public web sites. Various methods are available in Sympa and you can choose to use
       them with the spam_protection and web_archive_spam_protection parameters. Possible value
       are:

       javascript:

       the address is hidden using a javascript. A user who enables javascript can see a nice
       mailto address where others have nothing.

       at:

       the @ char is replaced by the string " AT ".

       none:

       no protection against spammer.

       "latest_instantiation"

       Latest family instantiation

       Single occurrence

       "latest_instantiation.email"

       who ran the instantiation

       Format:
           /"listmaster|$email"/

       Default:
           None.

       "latest_instantiation.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       "latest_instantiation.date"

       Deprecated.

       "creation"

       Creation of the list

       Single occurrence

       "creation.email"

       who created the list

       Format:
           /"listmaster|$email"/

       Default:
           None, mandatory.

       "creation.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       "creation.date"

       Deprecated.

       "update"

       Last update of config

       Single occurrence

       "update.email"

       who updated the config

       Format:
           /"(listmaster|automatic|$email)"/

       Default:
           None.

       "update.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       "update.date"

       Deprecated.

       "status"

       Status of the list

       Format:
           Status of list.

       Default:
           "open"

       "serial"

       Serial number of the config

       Format:
           /"\d+"/

       Default:
           0

       "account"

       Deprecated.

FILES

       $EXPLDIR/<list name>/config or $EXPLDIR/<mail domain name>/<list name>/config
           List main configuration file.

SEE ALSO

       sympa.conf(5).

       Sympa Administration Manual.  <https://sympa-community.github.io/manual/>.