Provided by: handbrake-cli_1.2.2+ds1-1build1_amd64 bug

NAME

       HandBrakeCLI - versatile DVD ripper and video transcoder (command line)

DESCRIPTION

       Syntax: HandBrakeCLI [options] -i <device> -o <file>

   ### General Handbrake Options
       -h, --help
              Print help

       -u, --update
              Check for updates and exit

       -v, --verbose <#>
              Be verbose (optional argument: logging level)

       -Z. --preset <string>
              Use  a  built-in preset. Capitalization matters, and if the preset name has spaces,
              surround it with double quotation marks

       -z, --preset-list
              See a list of available built-in presets

       --no-dvdnav
              Do not use dvdnav for reading DVDs (experimental, enabled by default for testing)

   ### Source Options
       -i, --input <string>
              Set input device

       -t, --title <number>
              Select a title to encode (0 to scan all titles only, default: 1)

       --min-duration
              Set the minimum title duration (in seconds). Shorter titles  will  not  be  scanned
              (default: 10).

       --scan Scan selected title only.

       --main-feature
              Detect and select the main feature title.

       -c, --chapters <string>
              Select  chapters  (e.g.  "1-3"  for  chapters  1  to  3, or "3" for chapter 3 only,
              default: all chapters)

       --angle <number>
              Select the DVD angle

       --previews <#:B>
              Select how many preview images are generated (max 30), and whether or  not  they're
              stored to disk (0 or 1).  (default: 10:0)

       --start-at-preview <#>
              Start encoding at a given preview.

       --start-at <unit:#>
              Start encoding at a given frame, duration (in seconds), or pts (on a 90kHz clock)

       --stop-at <unit:#>
              Stop encoding at a given frame, duration (in seconds), or pts (on a 90kHz clock)

   ### Destination Options
       -o, --output <string>
              Set output file name

       -f, --format <string>
              Set output format (mp4/mkv, default: autodetected from file name)

       -m, --markers
              Add chapter markers (mp4 and mkv output formats only)

       -4, --large-file
              Use  64-bit  mp4  files  that  can  hold  more  than  4  GB. Note: Breaks iPod, PS3
              compatibility.

       -O, --optimize
              Optimize mp4 files for HTTP streaming

       -I, --ipod-atom
              Mark mp4 files so 5.5G iPods will accept them

   ### Video Options
       -e, --encoder <string>
              Set video library encoder Options: x264 / ffmpeg4  /  ffmpeg2  /  theora  (default:
              ffmpeg4)

       --x264-preset <string>
              When using x264, selects the x264 preset:

              ultrafast  /  superfast  /  veryfast  /  faster  /  fast / medium / slow / slower /
              veryslow / placebo

       --x264-tune <string>
              When using x264, selects the x264 tuning:

              film / animation / grain / stillimage / psnr / ssim / fastdecode / zerolatency

       -x, --encopts <string>
              Specify advanced encoder options in the same style as  mencoder  (x264  and  ffmpeg
              only): option1=value1:option2=value2

       --x264-profile <string>
              When using x264, ensures compliance with the specified h.264 profile:

              baseline / main / high / high10 / high422 / high444

       -q, --quality <number>
              Set video quality

       -b, --vb <kb/s>
              Set video bitrate (default: 1000)

       -2, --two-pass
              Use two-pass mode

       -T, --turbo
              When  using  2-pass  use the turbo options on the first pass to improve speed (only
              works with x264, affects PSNR by about 0.05dB, and increases first pass  speed  two
              to four times)

       -r, --rate
              Set  video framerate (5 / 10 / 12 / 15 / 23.976 / 24 / 25 / 29.97 / 30 / 50 / 59.94
              / 60) Be aware that not specifying a framerate lets HandBrake preserve  a  source's
              time stamps, potentially creating variable framerate video

       --vfr, --cfr, --pfr
              Select  variable,  constant  or  peak-limited frame rate control. VFR preserves the
              source timing. CFR makes the output constant rate at the rate given by the -r  flag
              (or  the source's average rate if no -r is given). PFR doesn't allow the rate to go
              over the rate specified with the -r flag but won't change the source timing if it's
              below that rate.  If none of these flags are given, the default is --cfr when -r is
              given and --vfr otherwise

   ### Audio Options
       -a, --audio <string>
              Select audio track(s), separated by  commas  ("none"  for  no  audio,  "1,2,3"  for
              multiple  tracks,  default: first one).  Multiple output tracks can be used for one
              input.

       -E, --aencoder <string>
              Audio encoder(s):
                  faac
                  ffaac
                  copy:aac
                  ffac3
                  copy:ac3
                  copy:dts
                  copy:dtshd
                  lame
                  copy:mp3
                  vorbis
                  ffflac
                  copy

              copy:* will passthrough the corresponding audio unmodified to the muxer if it is  a
              supported  passthrough  audio  type.   Separated  by commas for more than one audio
              track.  (default: faac for mp4, lame for mkv)

       --audio-copy-mask <string>
              Set audio codecs that are  permitted  when  the  "copy"  audio  encoder  option  is
              specified  (aac/ac3/dts/dtshd/mp3, default: all).  Separated by commas for multiple
              allowed options.

       --audio-fallback <string>
              Set audio codec to use when it is not possible  to  copy  an  audio  track  without
              re-encoding.

       -B, --ab <kb/s>
              Set  audio  bitrate(s)  (default:  depends  on  the  selected  codec,  mixdown  and
              samplerate) Separated by commas for more than one audio track.

       -Q, --aq <quality>
              Set audio quality metric (default: depends on  the  selected  codec)  Separated  by
              commas for more than one audio track.

       -C, --ac <compression>
              Set  audio compression metric (default: depends on the selected codec) Separated by
              commas for more than one audio track.

       -6, --mixdown <string>
              Format(s) for surround sound downmixing Separated by commas for more than one audio
              track.   (mono/stereo/dpl1/dpl2/6ch,  default:  up  to  6ch for ac3, up to dpl2 for
              other encoders)

       -R, --arate
              Set audio samplerate(s) (22.05/24/32/44.1/48 kHz) Separated by commas for more than
              one audio track.

       -D, --drc <float>
              Apply  extra  dynamic  range  compression  to the audio, making soft sounds louder.
              Range is 1.0 to 4.0 (too loud), with 1.5 - 2.5 being a useful range.  Separated  by
              commas for more than one audio track.

       --gain <float>
              Amplify  or  attenuate  audio  before  encoding.  Does NOT work with audio passthru
              (copy). Values are in dB.  Negative values attenuate, positive values amplify. A  1
              dB difference is barely audible.

       -A, --aname <string>
              Audio track name(s), Separated by commas for more than one audio track.

   ### Picture Settings
       -w, --width <number>
              Set picture width

       -l, --height <number>
              Set picture height

       --crop <T:B:L:R>
              Set cropping values (default: autocrop)

       --loose-crop <#>
              Always  crop  to  a  multiple  of the modulus Specifies the maximum number of extra
              pixels which may be cropped (default: 15)

       -Y, --maxHeight <#>
              Set maximum height

       -X, --maxWidth <#>
              Set maximum width

       --strict-anamorphic
              Store pixel aspect ratio in video stream

       --loose-anamorphic
              Store pixel aspect ratio with specified width

       --custom-anamorphic
              Store pixel aspect ratio in video stream and directly control all parameters.

       --display-width <number>
              Set the width to scale the actual pixels to at playback, for custom anamorphic.

       --keep-display-aspect
              Preserve the source's display aspect ratio when using custom anamorphic

       --pixel-aspect <PARX:PARY>
              Set a custom pixel aspect for custom anamorphic (--display-width and --pixel-aspect
              are mutually exclusive and the former will override the latter)

       --itu-par
              Use  wider,  ITU  pixel  aspect values for loose and custom anamorphic, useful with
              underscanned sources

       --modulus
              Set the number you want the scaled pixel dimensions

       <number>
              to divide cleanly by. Does not affect strict anamorphic mode, which is always mod 2
              (default: 16)

       -M  --color-matrix <601 or 709>
              Set the color space signaled by the output (Bt.601 is mostly for SD content, Bt.709
              for HD, default: set by resolution)

   ### Filters
       -d, --deinterlace <YM:FD:MM:QP> or <fast/slow/slower>
              Deinterlace video with yadif/mcdeint filter (default 0:-1:-1:1)

       -5, --decomb <MO:ME:MT:ST:BT:BX:BY:MG:VA:LA:DI:ER:NO:MD:PP:FD>
              Selectively     deinterlaces     when     it     detects     combing      (default:
              7:2:6:9:80:16:16:10:20:20:4:2:50:24:1:-1)

       -9, --detelecine <L:R:T:B:SB:MP:FD>
              Detelecine (ivtc) video with pullup filter Note: this filter drops duplicate frames
              to restore the pre-telecine framerate, unless  you  specify  a  constant  framerate
              (--rate 29.97) (default 1:1:4:4:0:0:-1)

       -8, --denoise <SL:SC:TL:TC> or <weak/medium/strong>
              Denoise video with hqdn3d filter (default 4:3:6:4.5)

       -7, --deblock <QP:M>
              Deblock video with pp7 filter (default 5:2)

       --rotate <M>
              Flips images axes (default 3)

       -g, --grayscale
              Grayscale encoding

   ### Subtitle Options
       -s, --subtitle <string>
              Select  subtitle  track(s),  separated  by commas More than one output track can be
              used for one input.  Example: "1,2,3" for multiple tracks.  A  special  track  name
              "scan"  adds  an  extra  1st  pass.   This  extra pass scans subtitles matching the
              language of the first audio or the language selected by --native-language.  The one
              that's  only  used  10  percent of the time or less is selected. This should locate
              subtitles for short foreign  language  segments.  Best  used  in  conjunction  with
              --subtitle-forced.

       -F, --subtitle-forced <string>
              Only display subtitles from the selected stream if the subtitle has the forced flag
              set. The values in "string" are indexes  into  the  subtitle  list  specified  with
              '--subtitle'.   Separated  by  commas  for  more than one subtitle track.  Example:
              "1,2,3" for multiple tracks.  If "string" is omitted, the first track is forced.

       --subtitle-burned <number>
              "Burn" the selected subtitle into the video track If "number" is omitted, the first
              track  is  burned.   "number"  is  an  index  into the subtitle list specified with
              '--subtitle'.

       --subtitle-default <number>
              Flag the selected subtitle as the default subtitle to be displayed  upon  playback.
              Setting no default means no subtitle will be automatically displayed If "number" is
              omitted, the first track is default.  "number" is an index into the  subtitle  list
              specified with '--subtitle'.

       -N, --native-language <string>
              Specify  your  language  preference. When the first audio track does not match your
              native language then select the first subtitle that does. When used in  conjunction
              with  --native-dub  the  audio track is changed in preference to subtitles. Provide
              the language's iso639-2 code (fre, eng, spa, dut, et cetera)

       --native-dub
              Used in conjunction with --native-language requests that if  no  audio  tracks  are
              selected  the  default  selected audio track will be the first one that matches the
              --native-language. If there are no matching audio tracks then  the  first  matching
              subtitle track is used instead.

       --srt-file <string> SubRip SRT filename(s), separated by commas.

       --srt-codeset <string>
              Character codeset(s) that the SRT file(s) are encoded in, separated by commas.  Use
              'iconv -l' for a list of valid codesets. If not specified latin1 is assumed

       --srt-offset <string>
              Offset in milli-seconds to apply to the SRT file(s) separated  by  commas.  If  not
              specified zero is assumed.  Offsets may be negative.

       --srt-lang <string>
              Language as an iso639-2 code fra, eng, spa et cetera) for the SRT file(s) separated
              by commas. If not specified then 'und' is used.

       --srt-default <number>
              Flag the selected srt as the  default  subtitle  to  be  displayed  upon  playback.
              Setting no default means no subtitle will be automatically displayed If "number" is
              omitted, the first srt is default.  "number" is an 1 based index into the  srt-file
              list