Provided by: perl_5.28.1-6build1_amd64 bug


       enc2xs -- Perl Encode Module Generator


         enc2xs -[options]
         enc2xs -M ModName mapfiles...
         enc2xs -C


       enc2xs builds a Perl extension for use by Encode from either Unicode Character Mapping
       files (.ucm) or Tcl Encoding Files (.enc).  Besides being used internally during the build
       process of the Encode module, you can use enc2xs to add your own encoding to perl.  No
       knowledge of XS is necessary.

Quick Guide

       If you want to know as little about Perl as possible but need to add a new encoding, just
       read this chapter and forget the rest.

       0.  Have a .ucm file ready.  You can get it from somewhere or you can write your own from
           scratch or you can grab one from the Encode distribution and customize it.  For the
           UCM format, see the next Chapter.  In the example below, I'll call my theoretical
           encoding myascii, defined in my.ucm.  "$" is a shell prompt.

             $ ls -F

       1.  Issue a command as follows;

             $ enc2xs -M My my.ucm
             generating Makefile.PL
             generating README
             generating Changes

           Now take a look at your current directory.  It should look like this.

             $ ls -F
             Makefile.PL         my.ucm        t/

           The following files were created.

             Makefile.PL - MakeMaker script
          - Encode submodule
             t/My.t      - test file

               If you want *.ucm installed together with the modules, do as follows;

                 $ mkdir Encode
                 $ mv *.ucm Encode
                 $ enc2xs -M My Encode/*ucm

       2.  Edit the files generated.  You don't have to if you have no time AND no intention to
           give it to someone else.  But it is a good idea to edit the pod and to add more tests.

       3.  Now issue a command all Perl Mongers love:

             $ perl Makefile.PL
             Writing Makefile for Encode::My

       4.  Now all you have to do is make.

             $ make
             cp blib/lib/Encode/
             /usr/local/bin/perl /usr/local/bin/enc2xs -Q -O \
               -o encode_t.c -f encode_t.fnm
             Reading myascii (myascii)
             Writing compiled form
             128 bytes in string tables
             384 bytes (75%) saved spotting duplicates
             1 bytes (0.775%) saved using substrings
             chmod 644 blib/arch/auto/Encode/My/

           The time it takes varies depending on how fast your machine is and how large your
           encoding is.  Unless you are working on something big like euc-tw, it won't take too

       5.  You can "make install" already but you should test first.

             $ make test
             PERL_DL_NONLAZY=1 /usr/local/bin/perl -Iblib/arch -Iblib/lib \
               -e 'use Test::Harness  qw(&runtests $verbose); \
               $verbose=0; runtests @ARGV;' t/*.t
             All tests successful.
             Files=1, Tests=2,  0 wallclock secs
              ( 0.09 cusr + 0.01 csys = 0.09 CPU)

       6.  If you are content with the test result, just "make install"

       7.  If you want to add your encoding to Encode's demand-loading list (so you don't have to
           "use Encode::YourEncoding"), run

             enc2xs -C

           to update Encode::ConfigLocal, a module that controls local settings.  After that,
           "use Encode;" is enough to load your encodings on demand.

The Unicode Character Map

       Encode uses the Unicode Character Map (UCM) format for source character mappings.  This
       format is used by IBM's ICU package and was adopted by Nick Ing-Simmons for use with the
       Encode module.  Since UCM is more flexible than Tcl's Encoding Map and far more user-
       friendly, this is the recommended format for Encode now.

       A UCM file looks like this.

         # Comments
         <code_set_name> "US-ascii" # Required
         <code_set_alias> "ascii"   # Optional
         <mb_cur_min> 1             # Required; usually 1
         <mb_cur_max> 1             # Max. # of bytes/char
         <subchar> \x3F             # Substitution char
         <U0000> \x00 |0 # <control>
         <U0001> \x01 |0 # <control>
         <U0002> \x02 |0 # <control>
         <U007C> \x7C |0 # VERTICAL LINE
         <U007D> \x7D |0 # RIGHT CURLY BRACKET
         <U007E> \x7E |0 # TILDE
         <U007F> \x7F |0 # <control>
         END CHARMAP

       ·   Anything that follows "#" is treated as a comment.

       ·   The header section continues until a line containing the word CHARMAP. This section
           has a form of <keyword> value, one pair per line.  Strings used as values must be
           quoted. Barewords are treated as numbers.  \xXX represents a byte.

           Most of the keywords are self-explanatory. subchar means substitution character, not
           subcharacter.  When you decode a Unicode sequence to this encoding but no matching
           character is found, the byte sequence defined here will be used.  For most cases, the
           value here is \x3F; in ASCII, this is a question mark.

       ·   CHARMAP starts the character map section.  Each line has a form as follows:

             <UXXXX> \xXX.. |0 # comment
               ^     ^      ^
               |     |      +- Fallback flag
               |     +-------- Encoded byte sequence
               +-------------- Unicode Character ID in hex

           The format is roughly the same as a header section except for the fallback flag: |
           followed by 0..3.   The meaning of the possible values is as follows:

           |0  Round trip safe.  A character decoded to Unicode encodes back to the same byte
               sequence.  Most characters have this flag.

           |1  Fallback for unicode -> encoding.  When seen, enc2xs adds this character for the
               encode map only.

           |2  Skip sub-char mapping should there be no code point.

           |3  Fallback for encoding -> unicode.  When seen, enc2xs adds this character for the
               decode map only.

       ·   And finally, END OF CHARMAP ends the section.

       When you are manually creating a UCM file, you should copy ascii.ucm or an existing
       encoding which is close to yours, rather than write your own from scratch.

       When you do so, make sure you leave at least U0000 to U0020 as is, unless your environment
       is EBCDIC.

       CAVEAT: not all features in UCM are implemented.  For example, icu:state is not used.
       Because of that, you need to write a perl module if you want to support algorithmical
       encodings, notably the ISO-2022 series.  Such modules include Encode::JP::2022_JP,
       Encode::KR::2022_KR, and Encode::TW::HZ.

   Coping with duplicate mappings
       When you create a map, you SHOULD make your mappings round-trip safe.  That is,
       "encode('your-encoding', decode('your-encoding', $data)) eq $data" stands for all
       characters that are marked as "|0".  Here is how to make sure:

       ·   Sort your map in Unicode order.

       ·   When you have a duplicate entry, mark either one with '|1' or '|3'.

       ·   And make sure the '|1' or '|3' entry FOLLOWS the '|0' entry.

       Here is an example from big5-eten.

         <U2550> \xF9\xF9 |0
         <U2550> \xA2\xA4 |3

       Internally Encoding -> Unicode and Unicode -> Encoding Map looks like this;

         E to U               U to E
         \xF9\xF9 => U2550    U2550 => \xF9\xF9
         \xA2\xA4 => U2550

       So it is round-trip safe for \xF9\xF9.  But if the line above is upside down, here is what

         E to U               U to E
         \xA2\xA4 => U2550    U2550 => \xF9\xF9
         (\xF9\xF9 => U2550 is now overwritten!)

       The Encode package comes with ucmlint, a crude but sufficient utility to check the
       integrity of a UCM file.  Check under the Encode/bin directory for this.

       When in doubt, you can use ucmsort, yet another utility under Encode/bin directory.


       ·   ICU Home Page <>

       ·   ICU Character Mapping Tables <>

       ·   ICU:Conversion Data <>


       Encode, perlmod, perlpod