Provided by: libguestfs0_1.40.2-2ubuntu6_amd64 bug

NAME

       guestfs-faq - libguestfs Frequently Asked Questions (FAQ)

ABOUT LIBGUESTFS

   What is libguestfs?
       libguestfs is a way to create, access and modify disk images.  You can look inside disk
       images, modify the files they contain, create them from scratch, resize them, and much
       more.  It’s especially useful from scripts and programs and from the command line.

       libguestfs is a C library (hence "lib-"), and a set of tools built on this library, and
       bindings for many common programming languages.

       For more information about what libguestfs can do read the introduction on the home page
       (http://libguestfs.org).

   What are the virt tools?
       Virt tools (website: http://virt-tools.org) are a whole set of virtualization management
       tools aimed at system administrators.  Some of them come from libguestfs, some from
       libvirt and many others from other open source projects.  So virt tools is a superset of
       libguestfs.  However libguestfs comes with many important tools.  See
       http://libguestfs.org for a full list.

   Does libguestfs need { libvirt / KVM / Red Hat / Fedora }?
       No!

       libvirt is not a requirement for libguestfs.

       libguestfs works with any disk image, including ones created in VMware, KVM, qemu,
       VirtualBox, Xen, and many other hypervisors, and ones which you have created from scratch.

       Red Hat sponsors (ie. pays for) development of libguestfs and a huge number of other open
       source projects.  But you can run libguestfs and the virt tools on many different Linux
       distros and Mac OS X.  We try our best to support all Linux distros as first-class
       citizens.  Some virt tools have been ported to Windows.

   How does libguestfs compare to other tools?
       vs. kpartx
           Libguestfs takes a different approach from kpartx.  kpartx needs root, and mounts
           filesystems on the host kernel (which can be insecure - see guestfs-security(1)).
           Libguestfs isolates your host kernel from guests, is more flexible, scriptable,
           supports LVM, doesn't require root, is isolated from other processes, and cleans up
           after itself.  Libguestfs is more than just file access because you can use it to
           create images from scratch.

       vs. vdfuse
           vdfuse is like kpartx but for VirtualBox images.  See the kpartx comparison above.
           You can use libguestfs on the partition files exposed by vdfuse, although it’s not
           necessary since libguestfs can access VirtualBox images directly.

       vs. qemu-nbd
           NBD (Network Block Device) is a protocol for exporting block devices over the network.
           qemu-nbd is an NBD server which can handle any disk format supported by qemu (eg. raw,
           qcow2).  You can use libguestfs and qemu-nbd or nbdkit together to access block
           devices over the network, for example: "guestfish -a nbd://remote"

       vs. mounting filesystems in the host
           Mounting guest filesystems in the host is insecure and should be avoided completely
           for untrusted guests.  Use libguestfs to provide a layer of protection against
           filesystem exploits.  See also guestmount(1).

       vs. parted
           Libguestfs supports LVM.  Libguestfs uses parted and provides most parted features
           through the libguestfs API.

GETTING HELP AND REPORTING BUGS

   How do I know what version I'm using?
       The simplest method is:

        guestfish --version

       Libguestfs development happens along an unstable branch and we periodically create a
       stable branch which we backport stable patches to.  To find out more, read "LIBGUESTFS
       VERSION NUMBERS" in guestfs(3).

   How can I get help?
   What mailing lists or chat rooms are available?
       If you are a Red Hat customer using Red Hat Enterprise Linux, please contact
       Red Hat Support: http://redhat.com/support

       There is a mailing list, mainly for development, but users are also welcome to ask
       questions about libguestfs and the virt tools:
       https://www.redhat.com/mailman/listinfo/libguestfs

       You can also talk to us on IRC channel "#libguestfs" on FreeNode.  We're not always
       around, so please stay in the channel after asking your question and someone will get back
       to you.

       For other virt tools (not ones supplied with libguestfs) there is a general virt tools
       mailing list: https://www.redhat.com/mailman/listinfo/virt-tools-list

   How do I report bugs?
       Please use the following link to enter a bug in Bugzilla:

       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       Include as much detail as you can and a way to reproduce the problem.

       Include the full output of libguestfs-test-tool(1).

COMMON PROBLEMS

       See also "LIBGUESTFS GOTCHAS" in guestfs(3) for some "gotchas" with using the libguestfs
       API.

   "Could not allocate dynamic translator buffer"
       This obscure error is in fact an SELinux failure.  You have to enable the following
       SELinux boolean:

        setsebool -P virt_use_execmem=on

       For more information see https://bugzilla.redhat.com/show_bug.cgi?id=806106.

   "child process died unexpectedly"
       [This error message was changed in libguestfs 1.21.18 to something more explanatory.]

       This error indicates that qemu failed or the host kernel could not boot.  To get further
       information about the failure, you have to run:

        libguestfs-test-tool

       If, after using this, you still don’t understand the failure, contact us (see previous
       section).

   libguestfs: error: cannot find any suitable libguestfs supermin, fixed or old-style appliance
       on LIBGUESTFS_PATH
   febootstrap-supermin-helper: ext2: parent directory not found
   supermin-helper: ext2: parent directory not found
       [This issue is fixed permanently in libguestfs ≥ 1.26.]

       If you see any of these errors on Debian/Ubuntu, you need to run the following command:

        sudo update-guestfs-appliance

   "Permission denied" when running libguestfs as root
       You get a permission denied error when opening a disk image, even though you are running
       libguestfs as root.

       This is caused by libvirt, and so only happens when using the libvirt backend.  When run
       as root, libvirt decides to run the qemu appliance as user "qemu.qemu".  Unfortunately
       this usually means that qemu cannot open disk images, especially if those disk images are
       owned by root, or are present in directories which require root access.

       There is a bug open against libvirt to fix this:
       https://bugzilla.redhat.com/show_bug.cgi?id=1045069

       You can work around this by one of the following methods:

       ·   Switch to the direct backend:

            export LIBGUESTFS_BACKEND=direct

       ·   Don’t run libguestfs as root.

       ·   Chmod the disk image and any parent directories so that the qemu user can access them.

       ·   (Nasty) Edit /etc/libvirt/qemu.conf and change the "user" setting.

   execl: /init: Permission denied
       Note: If this error happens when you are using a distro package of libguestfs (eg. from
       Fedora, Debian, etc) then file a bug against the distro.  This is not an error which
       normal users should ever see if the distro package has been prepared correctly.

       This error happens during the supermin boot phase of starting the appliance:

        supermin: mounting new root on /root
        supermin: chroot
        execl: /init: Permission denied
        supermin: debug: listing directory /
        [...followed by a lot of debug output...]

       This is a complicated bug related to supermin(1) appliances.  The appliance is constructed
       by copying files like /bin/bash and many libraries from the host.  The file "hostfiles"
       lists the files that should be copied from the host into the appliance.  If some files
       don't exist on the host then they are missed out, but if these files are needed in order
       to (eg) run /bin/bash then you'll see the above error.

       Diagnosing the problem involves studying the libraries needed by /bin/bash, ie:

        ldd /bin/bash

       comparing that with "hostfiles", with the files actually available in the host filesystem,
       and with the debug output printed in the error message.  Once you've worked out which file
       is missing, install that file using your package manager and try again.

       You should also check that files like /init and /bin/bash (in the appliance) are
       executable.  The debug output shows file modes.

DOWNLOADING, INSTALLING, COMPILING LIBGUESTFS

   Where can I get the latest binaries for ...?
       Fedora ≥ 11
           Use:

            yum install '*guestf*'

           For the latest builds, see:
           http://koji.fedoraproject.org/koji/packageinfo?packageID=8391

       Red Hat Enterprise Linux
           RHEL 5
               The version shipped in official RHEL 5 is very old and should not be used except
               in conjunction with virt-v2v.  Use the up-to-date libguestfs 1.20 package in EPEL
               5: https://fedoraproject.org/wiki/EPEL

           RHEL 6
           RHEL 7
               It is part of the default install.  On RHEL 6 and 7 (only) you have to install
               "libguestfs-winsupport" to get Windows guest support.

       Debian and Ubuntu
           For libguestfs < 1.26, after installing libguestfs you need to do:

            sudo update-guestfs-appliance

           (This script has been removed on Debian/Ubuntu with libguestfs ≥ 1.26 and instead the
           appliance is built on demand.)

           On Ubuntu only:

            sudo chmod 0644 /boot/vmlinuz*

           You may need to add yourself to the "kvm" group:

            sudo usermod -a -G kvm yourlogin

           Debian Squeeze (6)
               Hilko Bengen has built libguestfs in squeeze backports:
               http://packages.debian.org/search?keywords=guestfs&searchon=names&section=all&suite=squeeze-backports

           Debian Wheezy and later (7+)
               Hilko Bengen supports libguestfs on Debian.  Official Debian packages are
               available: http://packages.debian.org/search?keywords=libguestfs

           Ubuntu
               We don’t have a full time Ubuntu maintainer, and the packages supplied by
               Canonical (which are outside our control) are sometimes broken.

               Canonical decided to change the permissions on the kernel so that it's not
               readable except by root.  This is completely stupid, but they won't change it
               (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/759725).  So every user
               should do this:

                sudo chmod 0644 /boot/vmlinuz*

               Ubuntu 12.04
                   libguestfs in this version of Ubuntu works, but you need to update febootstrap
                   and seabios to the latest versions.

                   You need febootstrap ≥ 3.14-2 from:
                   http://packages.ubuntu.com/precise/febootstrap

                   After installing or updating febootstrap, rebuild the appliance:

                    sudo update-guestfs-appliance

                   You need seabios ≥ 0.6.2-0ubuntu2.1 or ≥ 0.6.2-0ubuntu3 from:
                   http://packages.ubuntu.com/precise-updates/seabios or
                   http://packages.ubuntu.com/quantal/seabios

                   Also you need to do (see above):

                    sudo chmod 0644 /boot/vmlinuz*

       Gentoo
           Libguestfs was added to Gentoo in 2012-07 by Andreis Vinogradovs (libguestfs) and
           Maxim Koltsov (mainly hivex).  Do:

            emerge libguestfs

       SuSE
           Libguestfs was added to SuSE in 2012 by Olaf Hering.

       ArchLinux
           Libguestfs was added to the AUR in 2010.

       Other Linux distro
           Compile from source (next section).

       Other non-Linux distro
           You'll have to compile from source, and port it.

   How can I compile and install libguestfs from source?
       You can compile libguestfs from git or a source tarball.  Read the README file before
       starting.

       Git: https://github.com/libguestfs/libguestfs Source tarballs:
       http://libguestfs.org/download

       Don’t run "make install"!  Use the "./run" script instead (see README).

   How can I compile and install libguestfs if my distro doesn't have new enough
       qemu/supermin/kernel?
       Libguestfs needs supermin 5.  If supermin 5 hasn't been ported to your distro, then see
       the question below.

       First compile qemu, supermin and/or the kernel from source.  You do not need to "make
       install" them.

       In the libguestfs source directory, create two files.  "localconfigure" should contain:

        source localenv
        #export PATH=/tmp/qemu/x86_64-softmmu:$PATH
        ./autogen.sh --prefix /usr "$@"

       Make "localconfigure" executable.

       "localenv" should contain:

        #export SUPERMIN=/tmp/supermin/src/supermin
        #export LIBGUESTFS_HV=/tmp/qemu/x86_64-softmmu/qemu-system-x86_64
        #export SUPERMIN_KERNEL=/tmp/linux/arch/x86/boot/bzImage
        #export SUPERMIN_KERNEL_VERSION=4.XX.0
        #export SUPERMIN_MODULES=/tmp/lib/modules/4.XX.0

       Uncomment and adjust these lines as required to use the alternate programs you have
       compiled.

       Use "./localconfigure" instead of "./configure", but otherwise you compile libguestfs as
       usual.

       Don’t run "make install"!  Use the "./run" script instead (see README).

   How can I compile and install libguestfs without supermin?
       If supermin 5 supports your distro, but you don’t happen to have a new enough supermin
       installed, then see the previous question.

       If supermin 5 doesn't support your distro at all, you will need to use the "fixed
       appliance method" where you use a pre-compiled binary appliance.  To build libguestfs
       without supermin, you need to pass "--disable-appliance --disable-daemon" to either
       ./autogen.sh or ./configure (depending whether you are building respectively from git or
       from tarballs).  Then, when using libguestfs, you must set the "LIBGUESTFS_PATH"
       environment variable to the directory of a pre-compiled appliance, as also described in
       "FIXED APPLIANCE" in guestfs-internals(1).

       For pre-compiled appliances, see also: http://libguestfs.org/download/binaries/appliance/.

       Patches to port supermin to more Linux distros are welcome.

   How can I add support for sVirt?
       Note for Fedora/RHEL users: This configuration is the default starting with Fedora 18 and
       RHEL 7.  If you find any problems, please let us know or file a bug.

       SVirt provides a hardened appliance using SELinux, making it very hard for a rogue disk
       image to "escape" from the confinement of libguestfs and damage the host (it's fair to say
       that even in standard libguestfs this would be hard, but sVirt provides an extra layer of
       protection for the host and more importantly protects virtual machines on the same host
       from each other).

       Currently to enable sVirt you will need libvirt ≥ 0.10.2 (1.0 or later preferred),
       libguestfs ≥ 1.20, and the SELinux policies from recent Fedora.  If you are not running
       Fedora 18+, you will need to make changes to your SELinux policy - contact us on the
       mailing list.

       Once you have the requirements, do:

        ./configure --with-default-backend=libvirt       # libguestfs >= 1.22
        ./configure --with-default-attach-method=libvirt # libguestfs <= 1.20
        make

       Set SELinux to Enforcing mode, and sVirt should be used automatically.

       All, or almost all, features of libguestfs should work under sVirt.  There is one known
       shortcoming: virt-rescue(1) will not use libvirt (hence sVirt), but falls back to direct
       launch of qemu.  So you won't currently get the benefit of sVirt protection when using
       virt-rescue.

       You can check if sVirt is being used by enabling libvirtd logging (see
       /etc/libvirt/libvirtd.log), killing and restarting libvirtd, and checking the log files
       for "Setting SELinux context on ..." messages.

       In theory sVirt should support AppArmor, but we have not tried it.  It will almost
       certainly require patching libvirt and writing an AppArmor policy.

   Libguestfs has a really long list of dependencies!
       The base library doesn't depend on very much, but there are three causes of the long list
       of other dependencies:

       1.  Libguestfs has to be able to read and edit many different disk formats.  For example,
           XFS support requires XFS tools.

       2.  There are language bindings for many different languages, all requiring their own
           development tools.  All language bindings (except C) are optional.

       3.  There are some optional library features which can be disabled.

       Since libguestfs ≥ 1.26 it is possible to split up the appliance dependencies (item 1 in
       the list above) and thus have (eg) "libguestfs-xfs" as a separate subpackage for
       processing XFS disk images.  We encourage downstream packagers to start splitting the base
       libguestfs package into smaller subpackages.

   Errors during launch on Fedora  18, RHEL  7
       In Fedora ≥ 18 and RHEL ≥ 7, libguestfs uses libvirt to manage the appliance.  Previously
       (and upstream) libguestfs runs qemu directly:

        ┌──────────────────────────────────┐
        │ libguestfs                       │
        ├────────────────┬─────────────────┤
        │ direct backend │ libvirt backend │
        └────────────────┴─────────────────┘
               ↓                  ↓
           ┌───────┐         ┌──────────┐
           │ qemu  │         │ libvirtd │
           └───────┘         └──────────┘
                                  ↓
                              ┌───────┐
                              │ qemu  │
                              └───────┘

           upstream          Fedora 18+
           non-Fedora         RHEL 7+
           non-RHEL

       The libvirt backend is more sophisticated, supporting SELinux/sVirt (see above),
       hotplugging and more.  It is, however, more complex and so less robust.

       If you have permissions problems using the libvirt backend, you can switch to the direct
       backend by setting this environment variable:

        export LIBGUESTFS_BACKEND=direct

       before running any libguestfs program or virt tool.

   How can I switch to a fixed / prebuilt appliance?
       This may improve the stability and performance of libguestfs on Fedora and RHEL.

       Any time after installing libguestfs, run the following commands as root:

        mkdir -p /usr/local/lib/guestfs/appliance
        libguestfs-make-fixed-appliance /usr/local/lib/guestfs/appliance
        ls -l /usr/local/lib/guestfs/appliance

       Now set the following environment variable before using libguestfs or any virt tool:

        export LIBGUESTFS_PATH=/usr/local/lib/guestfs/appliance

       Of course you can change the path to any directory you want.  You can share the appliance
       across machines that have the same architecture (eg. all x86-64), but note that libvirt
       will prevent you from sharing the appliance across NFS because of permissions problems (so
       either switch to the direct backend or don't use NFS).

   How can I speed up libguestfs builds?
       By far the most important thing you can do is to install and properly configure Squid.
       Note that the default configuration that ships with Squid is rubbish, so configuring it is
       not optional.

       A very good place to start with Squid configuration is here:
       https://fedoraproject.org/wiki/Extras/MockTricks#Using_Squid_to_Speed_Up_Mock_package_downloads

       Make sure Squid is running, and that the environment variables $http_proxy and $ftp_proxy
       are pointing to it.

       With Squid running and correctly configured, appliance builds should be reduced to a few
       minutes.

       How can I speed up libguestfs builds (Debian)?

       Hilko Bengen suggests using "approx" which is a Debian archive proxy
       (http://packages.debian.org/approx).  This tool is documented on Debian in the approx(8)
       manual page.

SPEED, DISK SPACE USED BY LIBGUESTFS

       Note: Most of the information in this section has moved: guestfs-performance(1).

   Upload or write seem very slow.
       If the underlying disk is not fully allocated (eg. sparse raw or qcow2) then writes can be
       slow because the host operating system has to do costly disk allocations while you are
       writing. The solution is to use a fully allocated format instead, ie. non-sparse raw, or
       qcow2 with the "preallocation=metadata" option.

   Libguestfs uses too much disk space!
       libguestfs caches a large-ish appliance in:

        /var/tmp/.guestfs-<UID>

       If the environment variable "TMPDIR" is defined, then $TMPDIR/.guestfs-<UID> is used
       instead.

       It is safe to delete this directory when you are not using libguestfs.

   virt-sparsify seems to make the image grow to the full size of the virtual disk
       If the input to virt-sparsify(1) is raw, then the output will be raw sparse.  Make sure
       you are measuring the output with a tool which understands sparseness such as "du -sh".
       It can make a huge difference:

        $ ls -lh test1.img
        -rw-rw-r--. 1 rjones rjones 100M Aug  8 08:08 test1.img
        $ du -sh test1.img
        3.6M   test1.img

       (Compare the apparent size 100M vs the actual size 3.6M)

       If all this confuses you, use a non-sparse output format by specifying the --convert
       option, eg:

        virt-sparsify --convert qcow2 disk.raw disk.qcow2

   Why doesn't virt-resize work on the disk image in-place?
       Resizing a disk image is very tricky -- especially making sure that you don't lose data or
       break the bootloader.  The current method effectively creates a new disk image and copies
       the data plus bootloader from the old one.  If something goes wrong, you can always go
       back to the original.

       If we were to make virt-resize work in-place then there would have to be limitations: for
       example, you wouldn't be allowed to move existing partitions (because moving data across
       the same disk is most likely to corrupt data in the event of a power failure or crash),
       and LVM would be very difficult to support (because of the almost arbitrary mapping
       between LV content and underlying disk blocks).

       Another method we have considered is to place a snapshot over the original disk image, so
       that the original data is untouched and only differences are recorded in the snapshot.
       You can do this today using "qemu-img create" + "virt-resize", but qemu currently isn't
       smart enough to recognize when the same block is written back to the snapshot as already
       exists in the backing disk, so you will find that this doesn't save you any space or time.

       In summary, this is a hard problem, and what we have now mostly works so we are reluctant
       to change it.

   Why doesn't virt-sparsify work on the disk image in-place?
       In libguestfs ≥ 1.26, virt-sparsify can now work on disk images in place.  Use:

        virt-sparsify --in-place disk.img

       But first you should read "IN-PLACE SPARSIFICATION" in virt-sparsify(1).

PROBLEMS OPENING DISK IMAGES

   Remote libvirt guests cannot be opened.
       Opening remote libvirt guests is not supported at this time.  For example this won't work:

        guestfish -c qemu://remote/system -d Guest

       To open remote disks you have to export them somehow, then connect to the export.  For
       example if you decided to use NBD:

        remote$ qemu-nbd -t -p 10809 guest.img
         local$ guestfish -a nbd://remote:10809 -i

       Other possibilities include ssh (if qemu is recent enough), NFS or iSCSI.  See "REMOTE
       STORAGE" in guestfs(3).

   How can I open this strange disk source?
       You have a disk image located inside another system that requires access via a library /
       HTTP / REST / proprietary API, or is compressed or archived in some way.  (One example
       would be remote access to OpenStack glance images without actually downloading them.)

       We have a sister project called nbdkit (https://github.com/libguestfs/nbdkit).  This
       project lets you turn any disk source into an NBD server.  Libguestfs can access NBD
       servers directly, eg:

        guestfish -a nbd://remote

       nbdkit is liberally licensed, so you can link it to or include it in proprietary libraries
       and code.  It also has a simple, stable plugin API so you can easily write plugins against
       the API which will continue to work in future.

   Error opening VMDK disks: "uses a vmdk feature which is not supported by this qemu version:
       VMDK version 3"
       Qemu (and hence libguestfs) only supports certain VMDK disk images.  Others won't work,
       giving this or similar errors.

       Ideally someone would fix qemu to support the latest VMDK features, but in the meantime
       you have three options:

       1.  If the guest is hosted on a live, reachable ESX server, then locate and download the
           disk image called somename-flat.vmdk.  Despite the name, this is a raw disk image, and
           can be opened by anything.

           If you have a recent enough version of qemu and libguestfs, then you may be able to
           access this disk image remotely using either HTTPS or ssh.  See "REMOTE STORAGE" in
           guestfs(3).

       2.  Use VMware’s proprietary vdiskmanager tool to convert the image to raw format.

       3.  Use nbdkit with the proprietary VDDK plugin to live export the disk image as an NBD
           source.  This should allow you to read and write the VMDK file.

   UFS disks (as used by BSD) cannot be opened.
       The UFS filesystem format has many variants, and these are not self-identifying.  The
       Linux kernel has to be told which variant of UFS it has to use, which libguestfs cannot
       know.

       You have to pass the right "ufstype" mount option when mounting these filesystems.

       See https://www.kernel.org/doc/Documentation/filesystems/ufs.txt

   Windows ReFS
       Windows ReFS is Microsoft’s ZFS/Btrfs copy.  This filesystem has not yet been reverse
       engineered and implemented in the Linux kernel, and therefore libguestfs doesn't support
       it.  At the moment it seems to be very rare "in the wild".

   Non-ASCII characters don’t appear on VFAT filesystems.
       Typical symptoms of this problem:

       ·   You get an error when you create a file where the filename contains non-ASCII
           characters, particularly non 8-bit characters from Asian languages (Chinese, Japanese,
           etc).  The filesystem is VFAT.

       ·   When you list a directory from a VFAT filesystem, filenames appear as question marks.

       This is a design flaw of the GNU/Linux system.

       VFAT stores long filenames as UTF-16 characters.  When opening or returning filenames, the
       Linux kernel has to translate these to some form of 8 bit string.  UTF-8 would be the
       obvious choice, except for Linux users who persist in using non-UTF-8 locales (the user’s
       locale is not known to the kernel because it’s a function of libc).

       Therefore you have to tell the kernel what translation you want done when you mount the
       filesystem.  The two methods are the "iocharset" parameter (which is not relevant to
       libguestfs) and the "utf8" flag.

       So to use a VFAT filesystem you must add the "utf8" flag when mounting.  From guestfish,
       use:

        ><fs> mount-options utf8 /dev/sda1 /

       or on the guestfish command line:

        guestfish [...] -m /dev/sda1:/:utf8

       or from the API:

        guestfs_mount_options (g, "utf8", "/dev/sda1", "/");

       The kernel will then translate filenames to and from UTF-8 strings.

       We considered adding this mount option transparently, but unfortunately there are several
       problems with doing that:

       ·   On some Linux systems, the "utf8" mount option doesn't work.  We don't precisely
           understand what systems or why, but this was reliably reported by one user.

       ·   It would prevent you from using the "iocharset" parameter because it is incompatible
           with "utf8".  It is probably not a good idea to use this parameter, but we don't want
           to prevent it.

   Non-ASCII characters appear as underscore (_) on ISO9660 filesystems.
       The filesystem was not prepared correctly with mkisofs or genisoimage.  Make sure the
       filesystem was created using Joliet and/or Rock Ridge extensions.  libguestfs does not
       require any special mount options to handle the filesystem.

   Cannot open Windows guests which use NTFS.
       You see errors like:

        mount: unknown filesystem type 'ntfs'

       On Red Hat Enterprise Linux or CentOS < 7.2, you have to install the libguestfs-winsupport
       package.  In RHEL ≥ 7.2, "libguestfs-winsupport" is part of the base RHEL distribution,
       but see the next question.

   "mount: unsupported filesystem type" with NTFS in RHEL  7.2
       In RHEL 7.2 we were able to add "libguestfs-winsupport" to the base RHEL distribution, but
       we had to disable the ability to use it for opening and editing filesystems.  It is only
       supported when used with virt-v2v(1).  If you try to use guestfish(1) or guestmount(1) or
       some other programs on an NTFS filesystem, you will see the error:

        mount: unsupported filesystem type

       This is not a supported configuration, and it will not be made to work in RHEL.  Don't
       bother to open a bug about it, as it will be immediately "CLOSED -> WONTFIX".

       You may compile your own libguestfs removing this restriction, but that won't be endorsed
       or supported by Red Hat.

   Cannot open or inspect RHEL 7 guests.
   Cannot open Linux guests which use XFS.
       RHEL 7 guests, and any other guests that use XFS, can be opened by libguestfs, but you
       have to install the "libguestfs-xfs" package.

USING LIBGUESTFS IN YOUR OWN PROGRAMS

   The API has hundreds of methods, where do I start?
       We recommend you start by reading the API overview: "API OVERVIEW" in guestfs(3).

       Although the API overview covers the C API, it is still worth reading even if you are
       going to use another programming language, because the API is the same, just with simple
       logical changes to the names of the calls:

                         C  guestfs_ln_sf (g, target, linkname);
                    Python  g.ln_sf (target, linkname);
                     OCaml  g#ln_sf target linkname;
                      Perl  $g->ln_sf (target, linkname);
         Shell (guestfish)  ln-sf target linkname
                       PHP  guestfs_ln_sf ($g, $target, $linkname);

       Once you're familiar with the API overview, you should look at this list of starting
       points for other language bindings: "USING LIBGUESTFS WITH OTHER PROGRAMMING LANGUAGES" in
       guestfs(3).

   Can I use libguestfs in my proprietary / closed source / commercial program?
       In general, yes.  However this is not legal advice - read the license that comes with
       libguestfs, and if you have specific questions contact a lawyer.

       In the source tree the license is in the file "COPYING.LIB" (LGPLv2+ for the library and
       bindings) and "COPYING" (GPLv2+ for the standalone programs).

DEBUGGING LIBGUESTFS

   Help, it’s not working!
       If no libguestfs program seems to work at all, run the program below and paste the
       complete, unedited output into an email to "libguestfs" @ "redhat.com":

        libguestfs-test-tool

       If a particular operation fails, supply all the information in this checklist, in an email
       to "libguestfs" @ "redhat.com":

       1.  What are you trying to do?

       2.  What exact command(s) did you run?

       3.  What was the precise error or output of these commands?

       4.  Enable debugging, run the commands again, and capture the complete output.  Do not
           edit the output.

            export LIBGUESTFS_DEBUG=1
            export LIBGUESTFS_TRACE=1

       5.  Include the version of libguestfs, the operating system version, and how you installed
           libguestfs (eg. from source, "yum install", etc.)

   How do I debug when using any libguestfs program or tool (eg. virt-v2v or virt-df)?
       There are two "LIBGUESTFS_*" environment variables you can set in order to get more
       information from libguestfs.

       "LIBGUESTFS_TRACE"
           Set this to 1 and libguestfs will print out each command / API call in a format which
           is similar to guestfish commands.

       "LIBGUESTFS_DEBUG"
           Set this to 1 in order to enable massive amounts of debug messages.  If you think
           there is some problem inside the libguestfs appliance, then you should use this
           option.

       To set these from the shell, do this before running the program:

        export LIBGUESTFS_TRACE=1
        export LIBGUESTFS_DEBUG=1

       For csh/tcsh the equivalent commands would be:

        setenv LIBGUESTFS_TRACE 1
        setenv LIBGUESTFS_DEBUG 1

       For further information, see: "ENVIRONMENT VARIABLES" in guestfs(3).

   How do I debug when using guestfish?
       You can use the same environment variables above.  Alternatively use the guestfish options
       -x (to trace commands) or -v (to get the full debug output), or both.

       For further information, see: guestfish(1).

   How do I debug when using the API?
       Call "guestfs_set_trace" in guestfs(3) to enable command traces, and/or
       "guestfs_set_verbose" in guestfs(3) to enable debug messages.

       For best results, call these functions as early as possible, just after creating the
       guestfs handle if you can, and definitely before calling launch.

   How do I capture debug output and put it into my logging system?
       Use the event API.  For examples, see: "SETTING CALLBACKS TO HANDLE EVENTS" in guestfs(3)
       and the examples/debug-logging.c program in the libguestfs sources.

   Digging deeper into the appliance boot process.
       Enable debugging and then read this documentation on the appliance boot process:
       guestfs-internals(1).

   libguestfs hangs or fails during run/launch.
       Enable debugging and look at the full output.  If you cannot work out what is going on,
       file a bug report, including the complete output of libguestfs-test-tool(1).

   Debugging libvirt
       If you are using the libvirt backend, and libvirt is failing, then you can enable
       debugging by editing /etc/libvirt/libvirtd.conf.

       If you are running as non-root, then you have to edit a different file.  Create
       ~/.config/libvirt/libvirtd.conf containing:

        log_level=1
        log_outputs="1:file:/tmp/libvirtd.log"

       Kill any session (non-root) libvirtd that is running, and next time you run the libguestfs
       command, you should see a large amount of useful debugging information from libvirtd in
       /tmp/libvirtd.log

   Broken kernel, or trying a different kernel.
       You can choose a different kernel for the appliance by setting some supermin environment
       variables:

        export SUPERMIN_KERNEL_VERSION=4.8.0-1.fc25.x86_64
        export SUPERMIN_KERNEL=/boot/vmlinuz-$SUPERMIN_KERNEL_VERSION
        export SUPERMIN_MODULES=/lib/modules/$SUPERMIN_KERNEL_VERSION
        rm -rf /var/tmp/.guestfs-*
        libguestfs-test-tool

   Broken qemu, or trying a different qemu.
       You can choose a different qemu by setting the hypervisor environment variable:

        export LIBGUESTFS_HV=/path/to/qemu-system-x86_64
        libguestfs-test-tool

DESIGN/INTERNALS OF LIBGUESTFS

       See also guestfs-internals(1).

   Why don’t you do everything through the FUSE / filesystem interface?
       We offer a command called guestmount(1) which lets you mount guest filesystems on the
       host.  This is implemented as a FUSE module.  Why don't we just implement the whole of
       libguestfs using this mechanism, instead of having the large and rather complicated API?

       The reasons are twofold.  Firstly, libguestfs offers API calls for doing things like
       creating and deleting partitions and logical volumes, which don't fit into a filesystem
       model very easily.  Or rather, you could fit them in: for example, creating a partition
       could be mapped to "mkdir /fs/hda1" but then you'd have to specify some method to choose
       the size of the partition (maybe "echo 100M > /fs/hda1/.size"), and the partition type,
       start and end sectors etc., but once you've done that the filesystem-based API starts to
       look more complicated than the call-based API we currently have.

       The second reason is for efficiency.  FUSE itself is reasonably efficient, but it does
       make lots of small, independent calls into the FUSE module.  In guestmount these have to
       be translated into messages to the libguestfs appliance which has a big overhead (in time
       and round trips).  For example, reading a file in 64 KB chunks is inefficient because each
       chunk would turn into a single round trip.  In the libguestfs API it is much more
       efficient to download an entire file or directory through one of the streaming calls like
       "guestfs_download" or "guestfs_tar_out".

   Why don’t you do everything through GVFS?
       The problems are similar to the problems with FUSE.

       GVFS is a better abstraction than POSIX/FUSE.  There is an FTP backend for GVFS, which is
       encouraging because FTP is conceptually similar to the libguestfs API.  However the GVFS
       FTP backend makes multiple simultaneous connections in order to keep interactivity, which
       we can't easily do with libguestfs.

   Why can I write to the disk, even though I added it read-only?
   Why does "--ro" appear to have no effect?
       When you add a disk read-only, libguestfs places a writable overlay on top of the
       underlying disk.  Writes go into this overlay, and are discarded when the handle is closed
       (or "guestfish" etc. exits).

       There are two reasons for doing it this way: Firstly read-only disks aren't possible in
       many cases (eg. IDE simply doesn't support them, so you couldn't have an IDE-emulated
       read-only disk, although this is not common in real libguestfs installations).

       Secondly and more importantly, even if read-only disks were possible, you wouldn't want
       them.  Mounting any filesystem that has a journal, even "mount -o ro", causes writes to
       the filesystem because the journal has to be replayed and metadata updated.  If the disk
       was truly read-only, you wouldn't be able to mount a dirty filesystem.

       To make it usable, we create the overlay as a place to temporarily store these writes, and
       then we discard it afterwards.  This ensures that the underlying disk is always untouched.

       Note also that there is a regression test for this when building libguestfs (in
       "tests/qemu").  This is one reason why it’s important for packagers to run the test suite.

   Does "--ro" make all disks read-only?
       No!  The "--ro" option only affects disks added on the command line, ie. using "-a" and
       "-d" options.

       In guestfish, if you use the "add" command, then disk is added read-write (unless you
       specify the "readonly:true" flag explicitly with the command).

   Can I use "guestfish --ro" as a way to backup my virtual machines?
       Usually this is not a good idea.  The question is answered in more detail in this mailing
       list posting: https://www.redhat.com/archives/libguestfs/2010-August/msg00024.html

       See also the next question.

   Why can’t I run fsck on a live filesystem using "guestfish --ro"?
       This command will usually not work:

        guestfish --ro -a /dev/vg/my_root_fs run : fsck /dev/sda

       The reason for this is that qemu creates a snapshot over the original filesystem, but it
       doesn't create a strict point-in-time snapshot.  Blocks of data on the underlying
       filesystem are read by qemu at different times as the fsck operation progresses, with host
       writes in between.  The result is that fsck sees massive corruption (imaginary, not real!)
       and fails.

       What you have to do is to create a point-in-time snapshot.  If it’s a logical volume, use
       an LVM2 snapshot.  If the filesystem is located inside something like a btrfs/ZFS file,
       use a btrfs/ZFS snapshot, and then run the fsck on the snapshot.  In practice you don't
       need to use libguestfs for this -- just run /sbin/fsck directly.

       Creating point-in-time snapshots of host devices and files is outside the scope of
       libguestfs, although libguestfs can operate on them once they are created.

   What’s the difference between guestfish and virt-rescue?
       A lot of people are confused by the two superficially similar tools we provide:

        $ guestfish --ro -a guest.img
        ><fs> run
        ><fs> fsck /dev/sda1

        $ virt-rescue --ro guest.img
        ><rescue> /sbin/fsck /dev/sda1

       And the related question which then arises is why you can’t type in full shell commands
       with all the --options in guestfish (but you can in virt-rescue(1)).

       guestfish(1) is a program providing structured access to the guestfs(3) API.  It happens
       to be a nice interactive shell too, but its primary purpose is structured access from
       shell scripts.  Think of it more like a language binding, like Python and other bindings,
       but for shell.  The key differentiating factor of guestfish (and the libguestfs API in
       general) is the ability to automate changes.

       virt-rescue(1) is a free-for-all freeform way to boot the libguestfs appliance and make
       arbitrary changes to your VM. It’s not structured, you can't automate it, but for making
       quick ad-hoc fixes to your guests, it can be quite useful.

       But, libguestfs also has a "backdoor" into the appliance allowing you to send arbitrary
       shell commands.  It’s not as flexible as virt-rescue, because you can't interact with the
       shell commands, but here it is anyway:

        ><fs> debug sh "cmd arg1 arg2 ..."

       Note that you should not rely on this.  It could be removed or changed in future. If your
       program needs some operation, please add it to the libguestfs API instead.

   What’s the deal with "guestfish -i"?
   Why does virt-cat only work on a real VM image, but virt-df works on any disk image?
   What does "no root device found in this operating system image" mean?
       These questions are all related at a fundamental level which may not be immediately
       obvious.

       At the guestfs(3) API level, a "disk image" is just a pile of partitions and filesystems.

       In contrast, when the virtual machine boots, it mounts those filesystems into a consistent
       hierarchy such as:

        /          (/dev/sda2)
        │
        ├── /boot  (/dev/sda1)
        │
        ├── /home  (/dev/vg_external/Homes)
        │
        ├── /usr   (/dev/vg_os/lv_usr)
        │
        └── /var   (/dev/vg_os/lv_var)

       (or drive letters on Windows).

       The API first of all sees the disk image at the "pile of filesystems" level.  But it also
       has a way to inspect the disk image to see if it contains an operating system, and how the
       disks are mounted when the operating system boots: "INSPECTION" in guestfs(3).

       Users expect some tools (like virt-cat(1)) to work with VM paths:

        virt-cat fedora.img /var/log/messages

       How does virt-cat know that /var is a separate partition?  The trick is that virt-cat
       performs inspection on the disk image, and uses that to translate the path correctly.

       Some tools (including virt-cat(1), virt-edit(1), virt-ls(1)) use inspection to map VM
       paths.  Other tools, such as virt-df(1) and virt-filesystems(1) operate entirely at the
       raw "big pile of filesystems" level of the libguestfs API, and don't use inspection.

       guestfish(1) is in an interesting middle ground.  If you use the -a and -m command line
       options, then you have to tell guestfish exactly how to add disk images and where to mount
       partitions. This is the raw API level.

       If you use the -i option, libguestfs performs inspection and mounts the filesystems for
       you.

       The error "no root device found in this operating system image" is related to this.  It
       means inspection was unable to locate an operating system within the disk image you gave
       it.  You might see this from programs like virt-cat if you try to run them on something
       which is just a disk image, not a virtual machine disk image.

   What do these "debug*" and "internal-*" functions do?
       There are some functions which are used for debugging and internal purposes which are not
       part of the stable API.

       The "debug*" (or "guestfs_debug*") functions, primarily "guestfs_debug" in guestfs(3) and
       a handful of others, are used for debugging libguestfs.  Although they are not part of the
       stable API and thus may change or be removed at any time, some programs may want to call
       these while waiting for features to be added to libguestfs.

       The "internal-*" (or "guestfs_internal_*") functions are purely to be used by libguestfs
       itself.  There is no reason for programs to call them, and programs should not try to use
       them.  Using them will often cause bad things to happen, as well as not being part of the
       documented stable API.

DEVELOPERS

   Where do I send patches?
       Please send patches to the libguestfs mailing list
       https://www.redhat.com/mailman/listinfo/libguestfs.  You don't have to be subscribed, but
       there will be a delay until your posting is manually approved.

       Please don’t use github pull requests - they will be ignored.  The reasons are (a) we want
       to discuss and dissect patches on the mailing list, and (b) github pull requests turn into
       merge commits but we prefer to have a linear history.

   How do I propose a feature?
       Large new features that you intend to contribute should be discussed on the mailing list
       first (https://www.redhat.com/mailman/listinfo/libguestfs).  This avoids disappointment
       and wasted work if we don't think the feature would fit into the libguestfs project.

       If you want to suggest a useful feature but don’t want to write the code, you can file a
       bug (see "GETTING HELP AND REPORTING BUGS") with "RFE: " at the beginning of the Summary
       line.

   Who can commit to libguestfs git?
       About 5 people have commit access to github.  Patches should be posted on the list first
       and ACKed.  The policy for ACKing and pushing patches is outlined here:

       https://www.redhat.com/archives/libguestfs/2012-January/msg00023.html

   Can I fork libguestfs?
       Of course you can.  Git makes it easy to fork libguestfs.  Github makes it even easier.
       It’s nice if you tell us on the mailing list about forks and the reasons for them.

MISCELLANEOUS QUESTIONS

   Can I monitor the live disk activity of a virtual machine using libguestfs?
       A common request is to be able to use libguestfs to monitor the live disk activity of a
       guest, for example, to get notified every time a guest creates a new file.  Libguestfs
       does not work in the way some people imagine, as you can see from this diagram:

                   ┌─────────────────────────────────────┐
                   │ monitoring program using libguestfs │
                   └─────────────────────────────────────┘
                                    ↓
        ┌───────────┐    ┌──────────────────────┐
        │ live VM   │    │ libguestfs appliance │
        ├───────────┤    ├──────────────────────┤
        │ kernel (1)│    │ appliance kernel (2) │
        └───────────┘    └──────────────────────┘
             ↓                      ↓ (r/o connection)
             ┌──────────────────────┐
             |      disk image      |
             └──────────────────────┘

       This scenario is safe (as long as you set the "readonly" flag when adding the drive).
       However the libguestfs appliance kernel (2) does not see all the changes made to the disk
       image, for two reasons:

       i.  The VM kernel (1) can cache data in memory, so it doesn't appear in the disk image.

       ii. The libguestfs appliance kernel (2) doesn't expect that the disk image is changing
           underneath it, so its own cache is not magically updated even when the VM kernel (1)
           does update the disk image.

       The only supported solution is to restart the entire libguestfs appliance whenever you
       want to look at changes in the disk image.  At the API level that corresponds to calling
       "guestfs_shutdown" followed by "guestfs_launch", which is a heavyweight operation (see
       also guestfs-performance(3)).

       There are some unsupported hacks you can try if relaunching the appliance is really too
       costly:

       ·   Call "guestfs_drop_caches (g, 3)".  This causes all cached data help by the libguestfs
           appliance kernel (2) to be discarded, so it goes back to the disk image.

           However this on its own is not sufficient, because qemu also caches some data.  You
           will also need to patch libguestfs to (re-)enable the "cache=none" mode.  See:
           https://rwmj.wordpress.com/2013/09/02/new-in-libguestfs-allow-cache-mode-to-be-selected/

       ·   Use a tool like virt-bmap instead.

       ·   Run an agent inside the guest.

       Nothing helps if the guest is making more fundamental changes (eg.  deleting filesystems).
       For those kinds of things you must relaunch the appliance.

       (Note there is a third problem that you need to use consistent snapshots to really examine
       live disk images, but that’s a general problem with using libguestfs against any live disk
       image.)

SEE ALSO

       guestfish(1), guestfs(3), http://libguestfs.org/.

AUTHORS

       Richard W.M. Jones ("rjones at redhat dot com")

COPYRIGHT

       Copyright (C) 2012-2019 Red Hat Inc.

LICENSE

       This library is free software; you can redistribute it and/or modify it under the terms of
       the GNU Lesser General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU Lesser General Public License for more details.

       You should have received a copy of the GNU Lesser General Public License along with this
       library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth
       Floor, Boston, MA 02110-1301 USA

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       ·   The version of libguestfs.

       ·   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       ·   Describe the bug accurately and give a way to reproduce it.

       ·   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.