Provided by: alliance_5.1.1-3_amd64 bug


       l2p    -  Creates  a PostScript file from a symbolic layout file,or from a physical layout


       l2p    [-color]   [-drawingsize=<w>x<h>]   [-fA3]   [-fLETTER]   [-fLEGAL]   [-givebwdict]
              [-givecolordict]  [-help] [-noheader] [-papersize=<x>x<y>x<w>x<h>] [-pages=<x>x<y>]
              [-tsize=<s>] [-nrname] [-ncname] [-nrfname] [-niname]  [-nsname]  [-mfeed]  [-real]
              [-resol=<x>]    [-rflattencatal]    [-rflattentrans]    [-rotate]    [-scale=<f.f>]
              [-usedict=<f>] cellname


       Two main kind of cells can be used as inputs for l2p :
       First, you can use l2p to print symbolic layout cells. File formats can be .ap  or  .cp  .
       This  is  given  by  an environment variable MBK_IN_PH that gives the appropriate symbolic
       layout file format.
       Second, you can use l2p to print real layout cells whose file formats can be .cif or  .gds
       .   This is given by an environment variable RDS_IN that gives the appropriate real layout
       file format.
       The path to the input file is set up by two environment variables: MBK_WORK_LIB(3) and  if
       not  found  MBK_CATA_LIB(3).   The  output  of  l2p  is  a  PostScript file in the current
       directory. The drawing size and the paper size can be specified by the user. So,  you  can
       split  your drawing in as many pages as wanted. The resulting file can be then used on any
       adequat Postcript printer.
       l2p will generate in the current directory, either a  single  file  called  <cellname>.ps,
       either  several  files  suffixed  by  -<x>x<y>.ps,  depending on wether you've asked for a
       monopage plot or for a drawing that  will  be  splitted  on  several  pages.   If  you  do
       something  like  l2p  -pages=2x1  cell, it will generate two files called, and


       With no options, l2p generate a 'standard file', with all options off.   This  is  ok  for
       leaf cells, but not for large circuits.

       -color generates  a  color  PostScript  file for use with color interpreters.  The default
              value gives a black and white PostCript file.

              specifies the drawing area in centh of inch.  By default, wide = 725 and  height  =
              1068  for  french A4 paper. If the drawing size is bigger than the paper area, then
              the drawing will be splitted on several pages.

       -fA3   The drawing is done on A3 format paper.

              The drawing is done on LETTER format paper.

              The drawing is done on LEGAL format paper.

              give the Black & White internal PostScript dictionnary.  See below.

              This option must be unique  on  the   command   line.   When  used   as   in   'l2p
              -givebwdict',  l2p  then  gives  on the standard output its Black & White  internal
              Postscript dictionnary.  A PostScript dictionnary is a set of mac- ros that will be
              used  during  interpretation  of  your PostScript file.  The macros in the internal
              PostScript dictionnaries of l2p allows you to control which  layer to  output,  how
              to   plot   rectangles,  and  specify  the  colors  of  the rectangles. You get the
              standard diction- nary  by  a  line  of  the  form  'l2p -givecolordict >'.
              You  can  then  edit  it,  in order to reuse it with l2p, see the '-usedict' option

       -help  gives you this man page that explains how to use l2p.

              prevents the border and various info, as the cellname and the position of the  page
              in the drawing, from being printed.

              specifies the paper area in centh of inch. By default, 50x50x726x1069 for a4 paper.

              specifies  the  drawing  area  in  pages.  It  can  be useful, instead of having to
              calculate the size in cenths of inch of the drawing,  to  give  it  in  numbers  of
              pages. It takes care of the resizing of the paper and whether there is a header.

              Available sizes:6,8,10,12,14.The default value is 8.

              No name at all will be displayed.

              The external connector's names won't be displayed.

              The references's names won't be displayed.

              The instances's names won't be displayed.

              The segments's names won't be displayed.

       -mfeed Manualfeed:if  set,informs  the printer that it will be fed by the user himself,for
              each printing .

       -real  uses real file (cif, gds). By default, uses symbolic layout file (ap, cp).

              is the resolution of the  file  in  dots  per  inch  (dpi).  This  value  has  been
              introducted  to limitate the size of the generated PostScript files. Each rectangle
              whose width and height are smaller than the resolution will  not  be  printed.  The
              default value is 72dpi. It should only be changed in one specifical case : when you
              want to produce a plot  of  several  meter  large.  Usually,  you  must  provide  a
              PostScript  file  sized  for A4 paper with a much better resolution than 72dpi. You
              can then increase that value to up to 1000dpi, but be aware that the  size  of  the
              file  will probably be bigger than a 44Mb SyQuest cartridge that is used in PAO for
              exchanging data files.

              flattens the cell to the catalog level. see catal(5) for more details on the use of
              the catalog file. Be careful, this option requires a lot of memory...

              flattens  the cell to the transistor level before printing. Be careful, this option
              requires a lot more memory...

              rotate the cell from 90 degree. This is useful if you have a  wide  cell,  and  you
              want to have it printed in landscape mode.

              forces the cell to be printed with a certain scale (a floating-point number).  This
              is very useful, when you are printing a whole library of cells, and  you  want  all
              cells to be printed to the same scale.
              You  can  find at which scale a cell was printed by looking at the beginning of the
              file :  'head'  will  show  you  a  PostScript  comment  beginning  by
              '%SCALE=3.78435' for example.

              The output Postcript file contains a Postcript dictionnary of macros.
              There  are  two  standard  dictionnaries  used  by l2p for black and white or color
              prints.  This allows you to use a PostScript dictionnary  different  from  the  two
              internally  encoded into l2p. By modifying one of the standard l2p dictionnary, you
              can choose which layer to output,  how  to  fill  the  rectangles  (empty,  hashed,
              filled),  which  color  to choose, ... and lots of other possibilities. The rest of
              the generated postscript file is mainly orders of drawing rectangles. PostScript is
              a reverse polish notation langage, that is easy to read for simple programs.
              If  you  use  this  functionnality, and think that your dictionnaries are worth it,
              please mail them to,  in  order  to  submit  them  for
              inclusion in future version of l2p (Thanks).


       for symbolic file(s) :
              setenv MBK_IN_PH ap
              setenv MBK_WORK_LIB .
              setenv MBK_CATA_LIB /labo/cells/scr
              setenv MBK_CATAL_NAME CATAL
              setenv RDS_TECHNO_NAME cmos_1.rds

       for real file(s) :
              setenv RDS_IN cif
              setenv MBK_CATAL_NAME CATAL_ROUT
              setenv RDS_TECHNO_NAME prol12_1.rds


       l2p -color n1_y
              will create a colored file in the current directory : the 'standard' way.

       l2p -real cell
              will  create  a  file  in the current directory from cell.cif or cell.gds,
              depending on the RDS_IN environment variable.

       l2p -pages=3x2 na2_y
              size of the created drawing:3 horizontal pages,2 vertical ones;

       SEE ALSO
              mbk(1), rds(1), MBK_IN_PH(3), MBK_CATA_LIB(3), MBK_WORK_LIB(3),  MBK_CATAL_NAME(3),
              RDS_TECHNO_NAME(3), pageview(1), gs(1), ghostview(1), lpr(1).


       You  will  not  be  able  to  generate  more than approximativly 30 pages at the same time
       (because of the FOPEN_MAX of your environment). In this case, see the option that  is  not
       implemented yet.
       The  generated  PostScript  is  Level  1  for  black& white plots.  When you use color, it
       generates Level 1 with color extensions.  It may not run with strict Level 1 interpreters,
       although  it  runs here with our Apple Personnal LaserWriter, Sun Sparcprinters, and Canon
       CLC-300-PS.  It follows the Adobe Document Structuring Conventions 1, and as  there  is  a
       fake  bitmap  image  inside  each  generated  files,  you  can  re-use  them in your word-
       processors, or publishing software, because the PostScript is EPSF-1.2 compliant.