Provided by: erlang-base_22.0.7+dfsg-1build1_amd64 bug


       run_erl - Redirect Erlang input and output streams on Unix systems.


       The run_erl program is specific to Unix systems. This program redirects the standard input
       and standard output streams so that all output can be logged. It  also  lets  the  program
       to_erl  connect to the Erlang console, making it possible to monitor and debug an embedded
       system remotely.

       For more information about the use, see  the   Embedded  System  User's  Guide  in  System


       run_erl [-daemon] pipe_dir/ log_dir "exec command arg1 arg2 ..."


                  This  option  is  highly  recommended.  It  makes run_erl run in the background
                  completely detached from any controlling terminal and the  command  returns  to
                  the  caller  immediately.  Without  this  option, run_erl must be started using
                  several tricks in the shell to detach it completely from the  terminal  in  use
                  when  starting  it.  The  option  must  be the first argument to run_erl on the
                  command line.

                  The named pipe, usually /tmp/. It must be suffixed by a  /  (slash),  that  is,
                  /tmp/epipes/, not /tmp/epipes.

                  The log files, that is:

                  * One  log file, run_erl.log, which logs progress and warnings from the run_erl
                    program itself.

                  * Up to five log files at maximum 100 KB each with the content of the  standard
                    streams  from  and  to the command. (Both the number of logs and sizes can be
                    changed by environment variables, see section Environment Variables below.)

                    When the logs are full, run_erl deletes and reuses the oldest log file.

                "exec command arg1 arg2 ...":
                  A space-separated string specifying the program  to  be  executed.  The  second
                  field is typically a command name such as erl.


       While  running,  run_erl sends all output, uninterpreted, to a log file. The file is named
       erlang.log.N, where N is an integer. When the log is "full" (default log size is 100  KB),
       run_erl  starts to log in file erlang.log.(N+1), until N reaches a certain number (default
       5), whereupon N starts at 1 again and the oldest files start getting overwritten.

       If no output comes from the Erlang shell, but the Erlang machine still seems to be  alive,
       an  "ALIVE"  message is written to the log; it is a time stamp and is written, by default,
       after 15 minutes of inactivity. Also, if output from Erlang is logged,  but  more  than  5
       minutes  (default) has passed since last time we got anything from Erlang, a time stamp is
       written in the log. The "ALIVE" messages look as follows:

       ===== ALIVE <date-time-string>

       The other time stamps look as follows:

       ===== <date-time-string>

       date-time-string is the date and time the message is written, default in local  time  (can
       be  changed to UTC if needed). It is formatted with the ANSI-C function strftime using the
       format string %a %b %e %T %Z %Y, which produces messages  like  =====  ALIVE  Thu  May  15
       10:13:36 MEST 2003; this can be changed, see the next section.


       The  following  environment  variables  are  recognized  by run_erl and change the logging
       behavior. For more information, see the previous section.

           How long to wait for output (in minutes) before writing an "ALIVE" message to the log.
           Defaults to 15, minimum is 1.

           How  long  Erlang  needs  to  be inactive before output is preceded with a time stamp.
           Defaults to RUN_ERL_LOG_ALIVE_MINUTES div 3, minimum is 1.

           Specifies another format string to be used in the strftime C library  call.  That  is,
           specifying  this  to  "%e-%b-%Y,  %T  %Z"  gives  log  messages  with time stamps like
           15-May-2003, 10:23:04 MET. For more information,  see  the  documentation  for  the  C
           library function strftime. Defaults to "%a %b %e %T %Z %Y".

           If  set  to anything else than 0, it makes all times displayed by run_erl to be in UTC
           (GMT, CET, MET, without Daylight Saving Time), rather than in local  time.  This  does
           not  affect  data  coming  from  Erlang,  only  the  logs  output directly by run_erl.
           Application SASL can  be  modified  accordingly  by  setting  the  Erlang  application
           variable utc_log to true.

           Controls the number of log files written before older files are reused. Defaults to 5,
           minimum is 2, maximum is 1000.

           Note that, as a way to indicate the newest file, run_erl will delete  the  oldest  log
           file  to maintain a "hole" in the file sequences. For example, if log files #1, #2, #4
           and #5 exists, that means #2 is the latest and #4 is the oldest. You will therefore at
           most get one less log file than the value set by RUN_ERL_LOG_GENERATIONS.

           The  size,  in  bytes,  of  a log file before switching to a new log file. Defaults to
           100000, minimum is 1000, maximum is about 2^30.

           If defined, disables input and output flow control  for  the  pty  opend  by  run_erl.
           Useful  if  you  want  to remove any risk of accidentally blocking the flow control by
           using Ctrl-S (instead of Ctrl-D to detach), which can result in blocking of the entire
           Beam  process,  and  in the case of running heart as supervisor even the heart process
           becomes blocked when writing log message to terminal, leaving the heart process unable
           to do its work.


       start_embedded(1), start_erl(1)