Provided by: latexml_0.8.3-3_all bug

NAME

       "LaTeXML::Common::Config" - Configuration logic for LaTeXML

SYNPOSIS

           use LaTeXML::Common::Config;
           my $config = LaTeXML::Common::Config->new(
                     profile=>'name',
                     timeout=>60,
                     ... );
           $config->read(\@ARGV);
           $config->check;

           my $value = $config->get($name);
           $config->set($name,$value);
           $config->delete($name);
           my $bool = $config->exists($name);
           my @keys = $config->keys;
           my $options_hashref = $config->options;
           my $config_clone = $config->clone;

DESCRIPTION

       Configuration management class for LaTeXML options.
           * Responsible for defining the options interface
             and parsing the usual Perl command-line options syntax
           * Provides the intuitive getters, setters, as well as
             hash methods for manipulating the option values.
           * Also supports cloning into new configuration objects.

   METHODS
       "my $config = LaTeXML::Common::Config->new(%options);"
           Creates a new configuration object. Note that you should try
               not to provide your own %options hash but rather create an empty
               configuration and use $config->read to read in the options.

       "$config->read(\@ARGV);"
           This is the main method for parsing in LaTeXML options.
               The input array should either be @ARGV, e.g. when the
               options were provided from the command line using the
               classic Getopt::Long syntax,
               or any other array reference that conforms to that setup.

       "$config->check;"
           Ensures that the configuration obeys the given profile and
               performs a set of assignments of meaningful defaults
               (when needed) and normalizations (for relative paths, etc).

       "my $value = $config->get($name);"
           Classic getter for the $value of an option $name.

       "$config->set($name,$value);"
           Classic setter for the $value of an option $name.

       "$config->delete($name);"
           Deletes option $name from the configuration.

       "my $bool = $config->exists($name);"
           Checks whether the key $name exists in the options hash of the configuration.
               Similarly to Perl's "exist" for hashes, it returns true even when
               the option's value is undefined.

       "my @keys = $config->keys;"
           Similar to "keys %hash" in Perl. Returns an array of all option names.

       "my $options_hashref = $config->options;"
           Returns the actual hash reference that holds all options within the configuration
           object.

       "my $config_clone = $config->clone;"
           Clones $config into a new LaTeXML::Common::Config object, $config_clone.

OPTION SYNOPSIS

       latexmlc [options]

        Options:
        --VERSION               show version number.
        --help                  shows this help message.
        --destination=file      specifies destination file.
        --output=file           [obsolete synonym for --destination]
        --preload=module        requests loading of an optional module;
                                can be repeated
        --preamble=file         loads a tex file containing document
                                frontmatter. MUST include \begin{document}
                                or equivalent
        --postamble=file        loads a tex file containing document
                                backmatter. MUST include \end{document}
                                or equivalent
        --includestyles         allows latexml to load raw *.sty file;
                                by default it avoids this.
        --base=dir              sets the current working directory
        --path=dir              adds dir to the paths searched for files,
                                modules, etc;
        --log=file              specifies log file (default: STDERR)
        --autoflush=count       Automatically restart the daemon after
                                "count" inputs. Good practice for vast
                                batch jobs. (default: 100)
        --timeout=secs          Timecap for conversions (default 600)
        --expire=secs           Timecap for server inactivity (default 600)
        --address=URL           Specify server address (default: localhost)
        --port=number           Specify server port (default: 3354)
        --documentid=id         assign an id to the document root.
        --quiet                 suppress messages (can repeat)
        --verbose               more informative output (can repeat)
        --strict                makes latexml less forgiving of errors
        --bibtex                processes a BibTeX bibliography.
        --xml                   requests xml output (default).
        --tex                   requests TeX output after expansion.
        --box                   requests box output after expansion
                                and digestion.
        --format=name           requests "name" as the output format.
                                Supported: tex,box,xml,html4,html5,xhtml
                                html implies html5
        --noparse               suppresses parsing math (default: off)
        --parse=name            enables parsing math (default: on)
                                and selects parser framework "name".
                                Supported: RecDescent, no
        --profile=name          specify profile as defined in
                                LaTeXML::Common::Config
                                Supported: standard|math|fragment|...
                                (default: standard)
        --mode=name             Alias for profile
        --cache_key=name        Provides a name for the current option set,
                                to enable daemonized conversions without
                                needing re-initializing
        --whatsin=chunk         Defines the provided input chunk,
                                choose from document (default), fragment
                                and formula
        --whatsout=chunk        Defines the expected output chunk,
                                choose from document (default), fragment
                                and formula
        --post                  requests a followup post-processing
        --nopost                forbids followup post-processing
        --validate, --novalidate Enables (the default) or disables
                                validation of the source xml.
        --omitdoctype           omits the Doctype declaration,
        --noomitdoctype         disables the omission (the default)
        --numbersections        enables (the default) the inclusion of
                                section numbers in titles, crossrefs.
        --nonumbersections      disables the above
        --timestamp             provides a timestamp (typically a time and date)
                                to be embedded in the comments
        --embed                 requests an embeddable XHTML snippet
                                (requires: --post,--profile=fragment)
                                DEPRECATED: Use --whatsout=fragment
                                TODO: Remove completely
        --stylesheet            specifies a stylesheet,
                                to be used by the post-processor.
        --css=cssfile           adds a css stylesheet to html/xhtml
                                (can be repeated)
        --nodefaultresources    disables processing built-in resources
        --javscript=jsfile      adds a link to a javascript file into
                                html/html5/xhtml (can be repeated)
        --icon=iconfile         specify a file to use as a "favicon"
        --xsltparameter=name:value passes parameters to the XSLT.
        --split                 requests splitting each document
        --nosplit               disables the above (default)
        --splitat               sets level to split the document
        --splitpath=xpath       sets xpath expression to use for
                                splitting (default splits at
                                sections, if splitting is enabled)
        --splitnaming=(id|idrelative|label|labelrelative) specifies
                                how to name split files (idrelative).
        --scan                  scans documents to extract ids,
                                labels, etc.
                                section titles, etc. (default)
        --noscan                disables the above
        --crossref              fills in crossreferences (default)
        --nocrossref            disables the above
        --urlstyle=(server|negotiated|file) format to use for urls
                                (default server).
        --navigationtoc=(context|none) generates a table of contents
                                in navigation bar
        --index                 requests creating an index (default)
        --noindex               disables the above
        --splitindex            Splits index into pages per initial.
        --nosplitindex          disables the above (default)
        --permutedindex         permutes index phrases in the index
        --nopermutedindex       disables the above (default)
        --bibliography=file     sets a bibliography file
        --splitbibliography     splits the bibliography into pages per
                                initial.
        --nosplitbibliography   disables the above (default)
        --prescan               carries out only the split (if
                                enabled) and scan, storing
                                cross-referencing data in dbfile
                                (default is complete processing)
        --dbfile=dbfile         sets file to store crossreferences
        --sitedirectory=dir     sets the base directory of the site
        --sourcedirectory=dir   sets the base directory of the
                                original TeX source
        --source=input          as an alternative to passing the input as
                                the last argument, after the option set
                                you can also specify it as the value here.
                                useful for predictable API calls
        --mathimages            converts math to images
                                (default for html4 format)
        --nomathimages          disables the above
        --mathimagemagnification=mag specifies magnification factor
        --presentationmathml    converts math to Presentation MathML
                                (default for xhtml & html5 formats)
        --pmml                  alias for --presentationmathml
        --nopresentationmathml  disables the above
        --linelength=n          formats presentation mathml to a
                                linelength max of n characters
        --contentmathml         converts math to Content MathML
        --nocontentmathml       disables the above (default)
        --cmml                  alias for --contentmathml
        --openmath              converts math to OpenMath
        --noopenmath            disables the above (default)
        --om                    alias for --openmath
        --keepXMath             preserves the intermediate XMath
                                representation (default is to remove)
        --mathtex               adds TeX annotation to parallel markup
        --nomathtex             disables the above (default)
        --mathlex               (EXPERIMENTAL) adds linguistic lexeme
                                annotation to parallel markup
        --nomathlex             (EXPERIMENTAL) disables the above (default)
        --parallelmath          use parallel math annotations (default)
        --noparallelmath        disable parallel math annotations
        --plane1                use plane-1 unicode for symbols
                                (default, if needed)
        --noplane1              do not use plane-1 unicode
        --graphicimages         converts graphics to images (default)
        --nographicimages       disables the above
        --graphicsmap=type.type specifies a graphics file mapping
        --pictureimages         converts picture environments to
                                images (default)
        --nopictureimages       disables the above
        --svg                   converts picture environments to SVG
        --nosvg                 disables the above (default)
        --nocomments            omit comments from the output
        --inputencoding=enc     specify the input encoding.
        --debug=package         enables debugging output for the named
                                package

       If you want to provide a TeX snippet directly on input, rather than supply a filename, use
       the "literal:" protocol to prefix your snippet.

OPTIONS AND ARGUMENTS

   General Options
       "--verbose"
           Increases the verbosity of output during processing, used twice is pretty chatty.
               Can be useful for getting more details when errors occur.

       "--quiet"
           Reduces the verbosity of output during processing, used twice is pretty silent.

       "--VERSION"
           Shows the version number of the LaTeXML package..

       "--debug"=package
           Enables debugging output for the named package. The package is given without the
           leading LaTeXML::.

       "--base"=dir
           Sepcifies the base working directory for the conversion server.
               Useful when converting sets of documents that use relative paths.

       "--log"=file
           Specifies the log file; be default any conversion messages are printed to STDERR.

       "--help"
           Shows this help message.

   Source Options
       "--destination"=file
           Specifies the destination file; by default the XML is written to STDOUT.

       "--preload"=module
           Requests the loading of an optional module or package.  This may be useful if the TeX
           code
               does not specificly require the module (eg. through input or usepackage).
               For example, use "--preload=LaTeX.pool" to force LaTeX mode.

       "--preamble"=file
           Requests the loading of a tex file with document frontmatter, to be read in before the
           converted document,
               but after all --preload entries.

           Note that the given file MUST contain \begin{document} or an equivalent environment
           start,
               when processing LaTeX documents.

           If the file does not contain content to appear in the final document, but only macro
           definitions and
               setting of internal counters, it is more appropriate to use --preload instead.

       "--postamble"=file
           Requests the loading of a tex file with document backmatter, to be read in after the
           converted document.

           Note that the given file MUST contain \end{document} or an equivalent environment end,
               when processing LaTeX documents.

       "--sourcedirectory"=source
           Specifies the directory where the original latex source is located.  Unless LaTeXML is
           run from that directory, or it can be determined from the xml filename, it may be
           necessary to specify this option in order to find graphics and style files.

       "--path"=dir
           Add dir to the search paths used when searching for files, modules, style files, etc;
               somewhat like TEXINPUTS.  This option can be repeated.

       "--validate", "--novalidate"
           Enables (or disables) the validation of the source XML document (the default).

       "--bibtex"
           Forces latexml to treat the file as a BibTeX bibliography.
               Note that the timing is slightly different than the usual
               case with BibTeX and LaTeX.  In the latter case, BibTeX simply
               selects and formats a subset of the bibliographic entries; the
               actual TeX expansion is carried out when the result is included
               in a LaTeX document.  In contrast, latexml processes and expands
               the entire bibliography; the selection of entries is done
               during post-processing.  This also means that any packages
               that define macros used in the bibliography must be
               specified using the "--preload" option.

       "--inputencoding="encoding
           Specify the input encoding, eg. "--inputencoding=iso-8859-1".
               The encoding must be one known to Perl's Encode package.
               Note that this only enables the translation of the input bytes to
               UTF-8 used internally by LaTeXML, but does not affect catcodes.
               In such cases, you should be using the inputenc package.
               Note also that this does not affect the output encoding, which is
               always UTF-8.

   TeX Conversion Options
       "--includestyles"
           This optional allows processing of style files (files with extensions "sty",
               "cls", "clo", "cnf").  By default, these files are ignored  unless a latexml
               implementation of them is found (with an extension of "ltxml").

           These style files generally fall into two classes:  Those
               that merely affect document style are ignorable in the XML.
               Others define new markup and document structure, often using
               deeper LaTeX macros to achieve their ends.  Although the omission
               will lead to other errors (missing macro definitions), it is
               unlikely that processing the TeX code in the style file will
               lead to a correct document.

       "--timeout"=secs
           Set time cap for conversion jobs, in seconds. Any job failing to convert in the
               time range would return with a Fatal error of timing out.
               Default value is 600, set to 0 to disable.

       "--nocomments"
           Normally latexml preserves comments from the source file, and adds a comment every 25
           lines as
               an aid in tracking the source.  The option --nocomments discards such comments.

       "--documentid"=id
           Assigns an ID to the root element of the XML document.  This ID is generally
               inherited as the prefix of ID's on all other elements within the document.
               This is useful when constructing a site of multiple documents so that
               all nodes have unique IDs.

       "--strict"
           Specifies a strict processing mode. By default, undefined control sequences and
               invalid document constructs (that violate the DTD) give warning messages, but
           attempt
               to continue processing.  Using "--strict" makes them generate fatal errors.

       "--post"
           Request post-processing, auto-enabled by any requested post-processor. Disabled by
           default.
               If post-processing is enabled, the graphics and cross-referencing processors are
           on by default.

   Format Options
       "--format"="(html|html5|html4|xhtml|xml|epub)"
           Specifies the output format for post processing.  By default, it will be guessed from
           the file extension of the destination (if given), with html implying "html5", xhtml
           implying "xhtml" and the default being "xml", which you probably don't want.

           The "html5" format converts the material to html5 form with mathematics as MathML;
           "html5" supports SVG.  "html4" format converts the material to the earlier html form,
           version 4, and the mathematics to png images.  "xhtml" format converts to xhtml and
           uses presentation MathML (after attempting to parse the mathematics) for representing
           the math.  "html5" similarly converts math to presentation MathML. In these cases, any
           graphics will be converted to web-friendly formats and/or copied to the destination
           directory. If you simply specify "html", it will treat that as "html5".

           For the default, "xml", the output is left in LaTeXML's internal xml, but the math is
           parsed and converted to presentation MathML.  For html, html5 and xhtml, a default
           stylesheet is provided, but see the "--stylesheet" option.

       "--xml"
           Requests XML output; this is the default.
             DEPRECATED: use --format=xml instead

       "--tex"
           Requests TeX output for debugging purposes;
               processing is only carried out through expansion and digestion.
               This may not be quite valid TeX, since Unicode may be introduced.

       "--box"
           Requests Box output for debugging purposes;
               processing is carried out through expansion and digestions,
               and the result is printed.

       "--profile"
           Variety of shorthand profiles.
               Note that the profiles come with a variety of preset options.
               You can examine any of them in their "resources/Profiles/name.opt"
               file.

           Example: "latexmlc --profile=math '1+2=3'"

       "--omitdoctype", "--noomitdoctype"
           Omits (or includes) the document type declaration.  The default is to include it if
           the document model was based on a DTD.

       "--numbersections", "--nonumbersections"
           Includes (default), or disables the inclusion of section, equation, etc, numbers in
           the formatted document and crossreference links.

       "--stylesheet"=xslfile
           Requests the XSL transformation of the document using the given xslfile as stylesheet.
           If the stylesheet is omitted, a `standard' one appropriate for the format (html4,
           html5 or xhtml) will be used.

       "--css"=cssfile
           Adds cssfile as a css stylesheet to be used in the transformed html/html5/xhtml.
           Multiple stylesheets can be used; they are included in the html in the order given,
           following the default "ltx-LaTeXML.css" (unless "--nodefaultcss").  The stylesheet is
           copied to the destination directory, unless it is an absolute url.

           Some stylesheets included in the distribution are
             --css=navbar-left   Puts a navigation bar on the left.
                                 (default omits navbar)
             --css=navbar-right  Puts a navigation bar on the left.
             --css=theme-blue    A blue coloring theme for headings.
             --css=amsart        A style suitable for journal articles.

       "--javascript"=jsfile
           Includes a link to the javascript file jsfile, to be used in the transformed
           html/html5/xhtml.  Multiple javascript files can be included; they are linked in the
           html in the order given.  The javascript file is copied to the destination directory,
           unless it is an absolute url.

       "--icon"=iconfile
           Copies iconfile to the destination directory and sets up the linkage in the
           transformed html/html5/xhtml to use that as the "favicon".

       "--nodefaultresources"
           Disables the copying and inclusion of resources added by the binding files; This
           includes CSS, javascript or other files.  This does not affect resources explicitly
           requested by the "--css" or "--javascript" options.

       "--timestamp"=timestamp
           Provides a timestamp (typically a time and date) to be embedded in the comments by the
           stock XSLT stylesheets.  If you don't supply a timestamp, the current time and date
           will be used.  (You can use "--timestamp=0" to omit the timestamp).

       "--xsltparameter"=name:value
           Passes parameters to the XSLT stylesheet.  See the manual or the stylesheet itself for
           available parameters.

   Site & Crossreferencing Options
       "--split", "--nosplit"
           Enables or disables (default) the splitting of documents into multiple `pages'.  If
           enabled, the the document will be split into sections, bibliography, index and
           appendices (if any) by default, unless "--splitpath" is specified.

       "--splitat="unit
           Specifies what level of the document to split at. Should be one of "chapter",
           "section" (the default), "subsection" or "subsubsection".  For more control, see
           "--splitpath".

       "--splitpath="xpath
           Specifies an XPath expression to select nodes that will generate separate pages. The
           default splitpath is
             //ltx:section | //ltx:bibliography | //ltx:appendix | //ltx:index

           Specifying

             --splitpath="//ltx:section | //ltx:subsection
                    | //ltx:bibliography | //ltx:appendix | //ltx:index"

           would split the document at subsections as well as sections.

       "--splitnaming"="(id|idrelative|label|labelrelative)"
           Specifies how to name the files for subdocuments created by splitting.  The values
           "id" and "label" simply use the id or label of the subdocument's root node for it's
           filename.  "idrelative" and "labelrelative" use the portion of the id or label that
           follows the parent document's id or label. Furthermore, to impose structure and
           uniqueness, if a split document has children that are also split, that document (and
           it's children) will be in a separate subdirectory with the name index.

       "--scan", "--noscan"
           Enables (default) or disables the scanning of documents for ids, labels, references,
           indexmarks, etc, for use in filling in refs, cites, index and so on.  It may be useful
           to disable when generating documents not based on the LaTeXML doctype.

       "--crossref", "--nocrossref"
           Enables (default) or disables the filling in of references, hrefs, etc based on a
           previous scan (either from "--scan", or "--dbfile") It may be useful to disable when
           generating documents not based on the LaTeXML doctype.

       "--urlstyle"="(server|negotiated|file)"
           This option determines the way that URLs within the documents are formatted, depending
           on the way they are intended to be served.  The default, "server", eliminates
           unneccessary trailing "index.html".  With "negotiated", the trailing file extension
           (typically "html" or "xhtml") are eliminated.  The scheme "file" preserves complete
           (but relative) urls so that the site can be browsed as files without any server.

       "--navigationtoc"="(context|none)"
           Generates a table of contents in the navigation bar; default is "none".  The `context'
           style of TOC, is somewhat verbose and reveals more detail near the current page; it is
           most suitable for navigation bars placed on the left or right.  Other styles of TOC
           should be developed and added here, such as a short form.

       "--index", "--noindex"
           Enables (default) or disables the generation of an index from indexmarks embedded
           within the document.  Enabling this has no effect unless there is an index element in
           the document (generated by \printindex).

       "--splitindex", "--nosplitindex"
           Enables or disables (default) the splitting of generated indexes into separate pages
           per initial letter.

       "--bibliography="pathname
           Specifies a bibliography generated from a BibTeX file to be used to fill in a
           bibliography element.  Hand-written bibliographies placed in a "thebibliography"
           environment do not need this.  The option has no effect unless there is an
           bibliography element in the document (generated by \bibliography).

           Note that this option provides the bibliography to be used to fill in the bibliography
           element (generated by "\bibliography"); latexmlpost does not (currently) directly
           process and format such a bibliography.

       "--splitbibliography", "--nosplitbibliography"
           Enables or disables (default) the splitting of generated bibliographies into separate
           pages per initial letter.

       "--prescan"
           By default "latexmlpost" processes a single document into one (or more; see "--split")
           destination files in a single pass.  When generating a complicated site consisting of
           several documents it may be advantageous to first scan through the documents to
           extract and store (in "dbfile") cross-referencing data (such as ids, titles, urls, and
           so on).  A later pass then has complete information allowing all documents to
           reference each other, and also constructs an index and bibliography that reflects the
           entire document set.  The same effect (though less efficient) can be achieved by
           running "latexmlpost" twice, provided a "dbfile" is specified.

       "--dbfile"=file
           Specifies a filename to use for the crossreferencing data when using two-pass
           processing.  This file may reside in the intermediate destination directory.

       "--sitedirectory="dir
           Specifies the base directory of the overall web site.  Pathnames in the database are
           stored in a form relative to this directory to make it more portable.

       "--embed"
           TODO: Deprecated, use --whatsout=fragment Requests an embeddable XHTML div (requires:
           --post --format=xhtml),
               respectively the top division of the document's body.
               Caveat: This experimental mode is enabled only for fragment profile and post-
           processed
               documents (to XHTML).

   Math Options
       These options specify how math should be converted into other formats.  Multiple formats
       can be requested; how they will be combined depends on the format and other options.

       "--noparse"
           Suppresses parsing math (default: parsing is on)

       "--parse=name"
           Enables parsing math (default: parsing is on)
               and selects parser framework "name".
               Supported: RecDescent, no
               Tip: --parse=no is equivalent to --noparse

       "--mathimages", "--nomathimages"
           Requests or disables the conversion of math to images (png by default).  Conversion is
           the default for html4 format.

       "--mathsvg", "--nomathsvg"
           Requests or disables the conversion of math to svg images.

       "--mathimagemagnification="factor
           Specifies the magnification used for math images (both png and svg), if they are made.
           Default is 1.75.

       "--presentationmathml", "--nopresentationmathml"
           Requests or disables conversion of math to Presentation MathML.  Conversion is the
           default for xhtml and html5 formats.

       "--linelength"=number
           (Experimental) Line-breaks the generated Presentation MathML so that it is no longer
           than number `characters'.

       "--plane1"
           Converts the content of Presentation MathML token elements to the appropriate Unicode
           Plane-1 codepoints according to the selected font, when applicable (the default).

       "--hackplane1"
           Converts the content of Presentation MathML token elements to the appropriate Unicode
           Plane-1 codepoints according to the selected font, but only for the mathvariants
           double-struck, fraktur and script.  This gives support for current (as of August 2009)
           versions of Firefox and MathPlayer, provided a sufficient set of fonts is available
           (eg. STIX).

       "--contentmathml", "--nocontentmathml"
           Requests or disables conversion of math to Content MathML.  Conversion is disabled by
           default.  Note that this conversion is only partially implemented.

       "--openmath"
           Requests or disables conversion of math to OpenMath.  Conversion is disabled by
           default.  Note that this conversion is only partially implemented.

       "--keepXMath", "--xmath"
           By default, when any of the MathML or OpenMath conversions are used, the intermediate
           math representation will be removed; this option preserves it; it will be used as
           secondary parallel markup, when it follows the options for other math representations.

   Graphics Options
       "--graphicimages", "--nographicimages"
           Enables (default) or disables the conversion of graphics to web-appropriate format
           (png).

       "--graphicsmap="sourcetype.desttype
           Specifies a mapping of graphics file types. Typically, graphics elements specify a
           graphics file that will be converted to a more appropriate file target format; for
           example, postscript files used for graphics with LaTeX will be converted to png format
           for use on the web.  As with LaTeX, when a graphics file is specified without a file
           type, the system will search for the most appropriate target type file.

           When this option is used, it overrides and replaces the defaults and provides a
           mapping of sourcetype to desttype.  The option can be repeated to provide several
           mappings, with the earlier formats preferred.  If the desttype is omitted, it
           specifies copying files of type sourcetype, unchanged.

           The default settings is equivalent to having supplied the options:
             svg png gif jpg jpeg eps.png ps.png ai.png pdf.png

           The first formats are preferred and used unchanged, while the latter ones are
           converted to png.

       "--pictureimages", "--nopictureimages"
           Enables (default) or disables the conversion of picture environments and pstricks
           material into images.

       "--svg", "--nosvg"
           Enables or disables (default) the conversion of picture environments and pstricks
           material to SVG.

   Daemon, Server and Client Options
       Options used only for daemonized conversions, e.g. talking to a remote server via
       latexmlc, or local processing via the "LaTeXML::Plugin::latexmls" plugin.

       For reliable communication and a stable conversion experience, invoke latexmls only
       through the latexmlc client (you need to set --expire to a positive value, in order to
       request auto-spawning of a dedicated conversion server).

       "--autoflush"=count
           Automatically restart the daemon after converting "count" inputs.
               Good practice for vast batch jobs. (default: 100)

       "--expire"=secs
           Set an inactivity timeout value in seconds.
               If the server process is not given any input for the specified duration,
               it will automatically terminate.
               The default value is 600 seconds, set to 0 to never expire,
               -1 to entirely opt out of using an independent server.

       "--address"=URL
           Specify server address (default: localhost)

       "--port"=number
           Specify server port (default: 3334 for math, 3344 for fragment and 3354 for standard)

AUTHOR

       Bruce Miller <bruce.miller@nist.gov> Deyan Ginev <deyan.ginev@nist.gov>

COPYRIGHT

       Public domain software, produced as part of work done by the United States Government &
       not subject to copyright in the US.