Provided by: libsdl-perl_2.548-1build1_amd64 bug

NAME

       SDLx::Rect - SDL extension for storing and manipulating rectangular coordinates

CATEGORY

       Extension

SYNOPSIS

       SDLx::Rect works as a SDL::Rect in the lower layer (SDL::*) but provides more methods to
       users.

               use SDLx::Rect; #instead of SDL::Rect

               my $rect = SDLx::Rect->new( $x, $y, $w, $h); #same as SDL::Rect

               ...

               SDL::Video::fill_rect( .. , $rect, ...); # use like SDL::Rect

DESCRIPTION

       "SDLx::Rect" object are used to store and manipulate rectangular areas. Rect objects are
       created from a combination of left (or x), top (or y), width (or w) and height (or h)
       values, just like raw "SDL::Rect objects".

       All "SDLx::Rect" methods that change either position or size of a Rect return a new copy
       of the Rect with the affected changes. The original Rect is not modified. If you wish to
       modify the current Rect object, you can use the equivalent "in-place" methods that do not
       return but instead affects the original Rect. These "in-place" methods are denoted with
       the "ip" suffix. Note that changing a Rect's attribute is always an in-place operation.

   ATTRIBUTES
       All Rect attributes are accessors, meaning you can get them by name, and set them by
       passing a value:

          $rect->left(15);
          $rect->left;       # 15

       The Rect object has several attributes which can be used to resize, move and align the
       Rect.

       ·   width, w - gets/sets object's width

       ·   height, h - gets/sets object's height

       ·   left, x - moves the object left position to match the given coordinate

       ·   top, y  - moves the object top position to match the given coordinate

       ·   bottom - moves the object bottom position to match the given coordinate

       ·   right - moves the object right position to match the given coordinate

       ·   centerx - moves the object's horizontal center to match the given coordinate

       ·   centery - moves the object's vertical center to match the given coordinate

       Some of the attributes above can be fetched or set in pairs:

         $rect->topleft(10, 15);   # top is now 10, left is now 15

         my ($width, $height) = $rect->size;

       ·   size - gets/sets object's size (width, height)

       ·   topleft - gets/sets object's top and left positions

       ·   midleft - gets/sets object's vertical center and left positions

       ·   bottomleft - gets/sets object's bottom and left positions

       ·   center - gets/sets object's center (horizontal(x), vertical(y))

       ·   topright - gets/sets object's top and right positions

       ·   midright - gets/sets object's vertical center and right positions

       ·   bottomright - gets/sets object's bottom and right positions

       ·   midtop - gets/sets object's horizontal center and top positions

       ·   midbottom - gets/sets object's horizontal center and bottom positions

   METHODS
       Methods denoted as receiving Rect objects can receive either "<SDLx::Rect"> or raw
       "<SDL::Rect"> objects.

       new ($left, $top, $width, $height)

       Returns a new Rect object with the given coordinates. If any value is omitted (by passing
       undef), 0 is used instead.

       copy

       duplicate

       Returns a new Rect object having the same position and size as the original

       move(x, y)

       Returns a new Rect that is moved by the given offset. The x and y arguments can be any
       integer value, positive or negative.

       move_ip(x, y)

       Same as "<move"> above, but moves the current Rect in place and returns nothing.

       inflate(x, y)

       Grows or shrinks the rectangle. Returns a new Rect with the size changed by the given
       offset. The rectangle remains centered around its current center. Negative values will
       return a shrunken rectangle instead.

       inflate_ip(x, y)

       Same as "<inflate"> above, but grows/shrinks the current Rect in place and returns
       nothing.

       clamp($rect)

       Returns a new Rect moved to be completely inside the Rect object passed as an argument. If
       the current Rect is too large to fit inside the passed Rect, it is centered inside it, but
       its size is not changed.

       clamp_ip($rect)

       Same as "<clamp"> above, but moves the current Rect in place and returns nothing.

       clip($rect)

       Returns a new Rect with the intersection between the two Rect objects, that is, returns a
       new Rect cropped to be completely inside the Rect object passed as an argument. If the two
       rectangles do not overlap to begin with, a Rect with 0 size is returned, in the original
       Rect's (x,y) coordinates.

       clip_ip($rect)

       Same as "<clip"> above, but crops the current Rect in place and returns nothing. As the
       original method, the Rect becomes zero-sized if the two rectangles do not overlap to begin
       with, retaining its (x, y) coordinates.

       union($rect)

       Returns a new rectangle that completely covers the area of the current Rect and the one
       passed as an argument. There may be area inside the new Rect that is not covered by the
       originals.

       union_ip($rect)

       Same as "<union"> above, but resizes the current Rect in place and returns nothing.

       unionall( [$rect1, $rect2, ...] )

       Returns the union of one rectangle with a sequence of many rectangles, passed as an ARRAY
       REF.

       unionall_ip( [$rect1, $rect2, ...] )

       Same as "<unionall"> above, but resizes the current Rect in place and returns nothing.

       fit($rect)

       Returns a new Rect moved and resized to fit the Rect object passed as an argument. The
       aspect ratio of the original Rect is preserved, so the new rectangle may be smaller than
       the target in either width or height.

       fit_ip($rect)

       Same as "<fit"> above, but moves/resizes the current Rect in place and returns nothing.

       normalize

       Corrects negative sizes, flipping width/height of the Rect if they have a negative size.
       No repositioning is made so the rectangle will remain in the same place, but the negative
       sides will be swapped. This method returns nothing.

       contains($rect)

       Returns true (non-zero) when the argument is completely inside the Rect. Otherwise returns
       undef.

       collidepoint(x, y)

       Returns true (non-zero) if the given point is inside the Rect, otherwise returns undef. A
       point along the right or bottom edge is not considered to be inside the rectangle.

       colliderect($rect)

       Returns true (non-zero) if any portion of either rectangles overlap (except for the
       top+bottom or left+right edges).

       collidelist( [$rect1, $rect2, ...] )

       Test whether the rectangle collides with any in a sequence of rectangles, passed as an
       ARRAY REF. The index of the first collision found is returned. Returns undef if no
       collisions are found.

       collidelistall( [$rect1, $rect2, ...] )

       Returns an ARRAY REF of all the indices that contain rectangles that collide with the
       Rect. If no intersecting rectangles are found, an empty list ref is returned.

       collidehash( {key1 => $rect1, key2 => $rect2, ...} )

       Receives a HASH REF and returns the a (key, value) list with the key and value of the
       first hash item that collides with the Rect. If no collisions are found, returns (undef,
       undef).

       collidehashall( {key1 => $rect1, key2 => $rect2, ...} )

       Returns a HASH REF of all the key and value pairs that intersect with the Rect. If no
       collisions are found an empty hash ref is returned.

BUGS

       Please report any bugs or feature requests to the bug tracker. I will be notified, and
       then you'll automatically be notified of progress on your bug as we make changes.

SUPPORT

       You can find documentation for this module with the perldoc command.

           perldoc SDLx::Rect

AUTHORS

       See "AUTHORS" in SDL.

ACKNOWLEDGEMENTS

       Many thanks to the authors of pygame.rect, in which this particular module is heavily
       based.

COPYRIGHT & LICENSE

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.

SEE ALSO

       perl, SDL, SDL::Rect, SDL::Game