Provided by: libstatistics-linefit-perl_0.07-2_all

**NAME**

Statistics::LineFit - Least squares line fit, weighted or unweighted

**SYNOPSIS**

use Statistics::LineFit; $lineFit = Statistics::LineFit->new(); $lineFit->setData (\@xValues, \@yValues) or die "Invalid data"; ($intercept, $slope) = $lineFit->coefficients(); defined $intercept or die "Can't fit line if x values are all equal"; $rSquared = $lineFit->rSquared(); $meanSquaredError = $lineFit->meanSqError(); $durbinWatson = $lineFit->durbinWatson(); $sigma = $lineFit->sigma(); ($tStatIntercept, $tStatSlope) = $lineFit->tStatistics(); @predictedYs = $lineFit->predictedYs(); @residuals = $lineFit->residuals(); (varianceIntercept, $varianceSlope) = $lineFit->varianceOfEstimates();

**DESCRIPTION**

The Statistics::LineFit module does weighted or unweighted least-squares line fitting to two-dimensional data (y = a + b * x). (This is also called linear regression.) In addition to the slope and y-intercept, the module can return the square of the correlation coefficient (R squared), the Durbin-Watson statistic, the mean squared error, sigma, the t statistics, the variance of the estimates of the slope and y-intercept, the predicted y values and the residuals of the y values. (See the METHODS section for a description of these statistics.) The module accepts input data in separate x and y arrays or a single 2-D array (an array of arrayrefs). The optional weights are input in a separate array. The module can optionally verify that the input data and weights are valid numbers. If weights are input, the line fit minimizes the weighted sum of the squared errors and the following statistics are weighted: the correlation coefficient, the Durbin-Watson statistic, the mean squared error, sigma and the t statistics. The module is state-oriented and caches its results. Once you call thesetData()method, you can call the other methods in any order or call a method several times without invoking redundant calculations. After callingsetData(), you can modify the input data or weights without affecting the module's results. The decision to use or not use weighting could be made using your a priori knowledge of the data or using supplemental data. If the data is sparse or contains non-random noise, weighting can degrade the solution. Weighting is a good option if some points are suspect or less relevant (e.g., older terms in a time series, points that are known to have more noise).

**ALGORITHM**

The least-square line is the line that minimizes the sum of the squares of the y residuals: Minimize SUM((y[i] - (a + b * x[i])) ** 2) Setting the parial derivatives of a and b to zero yields a solution that can be expressed in terms of the means, variances and covariances of x and y: b = SUM((x[i] - meanX) * (y[i] - meanY)) / SUM((x[i] - meanX) ** 2) a = meanY - b * meanX Note that a and b are undefined if all the x values are the same. If you use weights, each term in the above sums is multiplied by the value of the weight for that index. The program normalizes the weights (after copying the input values) so that the sum of the weights equals the number of points. This minimizes the differences between the weighted and unweighted equations. Statistics::LineFit uses equations that are mathematically equivalent to the above equations and computationally more efficient. The module runs in O(N) (linear time).

**LIMITATIONS**

The regression fails if the input x values are all equal or the only unequal x values have zero weights. This is an inherent limit to fitting a line of the form y = a + b * x. In this case, the module issues an error message and methods that return statistical values will return undefined values. You can also use the return value of theregress()method to check the status of the regression. As the sum of the squared deviations of the x values approaches zero, the module's results becomes sensitive to the precision of floating point operations on the host system. If the x values are not all the same and the apparent "best fit" line is vertical, the module will fit a horizontal line. For example, an input of (1, 1), (1, 7), (2, 3), (2, 5) returns a slope of zero, an intercept of 4 and an R squared of zero. This is correct behavior because this line is the best least-squares fit to the data for the given parameterization (y = a + b * x). On a 32-bit system the results are accurate to about 11 significant digits, depending on the input data. Many of the installation tests will fail on a system with word lengths of 16 bits or fewer. (You might want to upgrade your old 80286 IBM PC.)

**EXAMPLES**

Alternatecallingsequence:use Statistics::LineFit; $lineFit = Statistics::LineFit->new(); $lineFit->setData(\@x, \@y) or die "Invalid regression data\n"; if (defined $lineFit->rSquared() and $lineFit->rSquared() > $threshold) { ($intercept, $slope) = $lineFit->coefficients(); print "Slope: $slope Y-intercept: $intercept\n"; }Multiplecallswithsameobject,validateinput,suppresserrormessages:use Statistics::LineFit; $lineFit = Statistics::LineFit->new(1, 1); while (1) { @xy = read2Dxy(); # User-supplied subroutine $lineFit->setData(\@xy); ($intercept, $slope) = $lineFit->coefficients(); if (defined $intercept) { print "Slope: $slope Y-intercept: $intercept\n"; } }

**METHODS**

The module is state-oriented and caches its results. Once you call thesetData()method, you can call the other methods in any order or call a method several times without invoking redundant calculations. The regression fails if the x values are all the same. In this case, the module issues an error message and methods that return statistical values will return undefined values. You can also use the return value of theregress()method to check the status of the regression.new()-createanewStatistics::LineFitobject$lineFit = Statistics::LineFit->new(); $lineFit = Statistics::LineFit->new($validate); $lineFit = Statistics::LineFit->new($validate, $hush); $validate = 1 -> Verify input data is numeric (slower execution) 0 -> Don't verify input data (default, faster execution) $hush = 1 -> Suppress error messages = 0 -> Enable error messages (default)coefficients()-Returntheslopeandyintercept($intercept, $slope) = $lineFit->coefficients(); The returned list is undefined if the regression fails.durbinWatson()-ReturntheDurbin-Watsonstatistic$durbinWatson = $lineFit->durbinWatson(); The Durbin-Watson test is a test for first-order autocorrelation in the residuals of a time series regression. The Durbin-Watson statistic has a range of 0 to 4; a value of 2 indicates there is no autocorrelation. The return value is undefined if the regression fails. If weights are input, the return value is the weighted Durbin-Watson statistic.meanSqError()-Returnthemeansquarederror$meanSquaredError = $lineFit->meanSqError(); The return value is undefined if the regression fails. If weights are input, the return value is the weighted mean squared error.predictedYs()-Returnthepredictedyvalues@predictedYs = $lineFit->predictedYs(); The returned list is undefined if the regression fails.regress()-Dotheleastsquareslinefit(ifnotalreadydone)$lineFit->regress() or die "Regression failed" You don't need to call this method because it is invoked by the other methods as needed. After you callsetData(), you can callregress()at any time to get the status of the regression for the current data.residuals()-Returnpredictedyvaluesminusinputyvalues@residuals = $lineFit->residuals(); The returned list is undefined if the regression fails.rSquared()-Returnthesquareofthecorrelationcoefficient$rSquared = $lineFit->rSquared(); R squared, also called the square of the Pearson product-moment correlation coefficient, is a measure of goodness-of-fit. It is the fraction of the variation in Y that can be attributed to the variation in X. A perfect fit will have an R squared of 1; fitting a line to the vertices of a regular polygon will yield an R squared of zero. Graphical displays of data with an R squared of less than about 0.1 do not show a visible linear trend. The return value is undefined if the regression fails. If weights are input, the return value is the weighted correlation coefficient.setData()-Initialize(x,y)valuesandoptionalweights$lineFit->setData(\@x, \@y) or die "Invalid regression data"; $lineFit->setData(\@x, \@y, \@weights) or die "Invalid regression data"; $lineFit->setData(\@xy) or die "Invalid regression data"; $lineFit->setData(\@xy, \@weights) or die "Invalid regression data"; @xy is an array of arrayrefs; x values are $xy[$i][0], y values are $xy[$i][1]. (The module does not access any indices greater than $xy[$i][1], so the arrayrefs can point to arrays that are longer than two elements.) The method identifies the difference between the first and fourth calling signatures by examining the first argument. The optional weights array must be the same length as the data array(s). The weights must be non-negative numbers; at least two of the weights must be nonzero. Only the relative size of the weights is significant: the program normalizes the weights (after copying the input values) so that the sum of the weights equals the number of points. If you want to do multiple line fits using the same weights, the weights must be passed to each call tosetData(). The method will return zero if the array lengths don't match, there are less than two data points, any weights are negative or less than two of the weights are nonzero. If thenew()method was called with validate = 1, the method will also verify that the data and weights are valid numbers. Once you successfully callsetData(), the next call to any method other thannew()orsetData()invokes the regression. You can modify the input data or weights after callingsetData()without affecting the module's results.sigma()-Returnthestandarderroroftheestimate$sigma = $lineFit->sigma(); Sigma is an estimate of the homoscedastic standard deviation of the error. Sigma is also known as the standard error of the estimate. The return value is undefined if the regression fails. If weights are input, the return value is the weighted standard error.tStatistics()-Returnthetstatistics(tStatIntercept, $tStatSlope) = $lineFit->tStatistics(); The t statistic, also called the t ratio or Wald statistic, is used to accept or reject a hypothesis using a table of cutoff values computed from the t distribution. The t-statistic suggests that the estimated value is (reasonable, too small, too large) when the t-statistic is (close to zero, large and positive, large and negative). The returned list is undefined if the regression fails. If weights are input, the returned values are the weighted t statistics.varianceOfEstimates()-Returnvariancesofestimatesofintercept,slope(varianceIntercept, $varianceSlope) = $lineFit->varianceOfEstimates(); Assuming the data are noisy or inaccurate, the intercept and slope returned by thecoefficients()method are only estimates of the true intercept and slope. ThevarianceofEstimate()method returns the variances of the estimates of the intercept and slope, respectively. See Numerical Recipes in C, section 15.2 (Fitting Data to a Straight Line), equation 15.2.9. The returned list is undefined if the regression fails. If weights are input, the returned values are the weighted variances.

**SEE** **ALSO**

Mendenhall, W., and Sincich, T.L., 2003, A Second Course in Statistics: Regression Analysis, 6th ed., Prentice Hall. Press, W. H., Flannery, B. P., Teukolsky, S. A., Vetterling, W. T., 1992, Numerical Recipes in C : The Art of Scientific Computing, 2nd ed., Cambridge University Press. The man page for perl(1). The CPAN modules Statistics::OLS, Statistics::GaussHelmert and Statistics::Regression. Statistics::LineFit is simpler to use than Statistics::GaussHelmert or Statistics::Regression. Statistics::LineFit was inspired by and borrows some ideas from the venerable Statistics::OLS module. The significant differences between Statistics::LineFit and Statistics::OLS (version 0.07) are:Statistics::LineFitismorerobust.Statistics::OLS returns incorrect results for certain input datasets. Statistics::OLS does not deep copy its input arrays, which can lead to subtle bugs. The Statistics::OLS installation test has only one test and does not verify that the regression returns correct results. In contrast, Statistics::LineFit has over 200 installation tests that use various datasets/calling sequences to verify the accuracy of the regression to within 1.0e-10.Statistics::LineFitisfaster.For a sequence of calls tonew(), setData(\@x, \@y) andregress(), Statistics::LineFit is faster than Statistics::OLS by factors of 2.0, 1.6 and 2.4 for array lengths of 5, 100 and 10000, respectively.Statistics::LineFitcandoweightedorunweightedregression.Statistics::OLS lacks this option.Statistics::LineFithasabetterinterface.Once you call theStatistics::LineFit::setData()method, you can call the other methods in any order and call methods multiple times without invoking redundant calculations. Statistics::LineFit lets you enable or disable data verification or error messages.Statistics::LineFithasbettercodeanddocumentation.The code in Statistics::LineFit is more readable, more object oriented and more compliant with Perl coding standards than the code in Statistics::OLS. The documentation for Statistics::LineFit is more detailed and complete.

**AUTHOR**

Richard Anderson, cpan(AT)richardanderson(DOT)org, http://www.richardanderson.org

**LICENSE**

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of the license can be found in the LICENSE file included in the distribution and available in the CPAN listing for Statistics::LineFit (see www.cpan.org or search.cpan.org).

**DISCLAIMER**

To the maximum extent permitted by applicable law, the author of this module disclaims all warranties, either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, with regard to the software and the accompanying documentation.