Provided by: svxlink-server_17.12.2-4_amd64 bug

NAME

       ModuleFrn.conf - Configuration file for the SvxLink server Free Radio Network (FRN) module

DESCRIPTION

       svxlink  is  a  general  purpose  voice  service  system  for ham radio use. This man-page
       describe the SvxLink server configuration for the FRN module.

       The FRN module is used to connect to Free Radio Network (FRN) servers.

CONFIGURATION VARIABLES

       There are a couple of configuration  variables  that  are  common  to  all  modules.   The
       documentation for these can be found in the svxlink.conf(5) manual page.

       Here  is  the  description of all module specific configuration variables that the SvxLink
       FRN module understands.

   ModuleFrn
       SERVER Free Radio Network (FRN) server hostname or ip address, you  can  find  a  list  of
              active  servers  using FRN desktop application or at http://freeradionetwork.eu web
              page.

       PORT   FRN server port number

       SERVER_BACKUP
              Free Radio Network (FRN) backup server hostname or ip address. When connectivity to
              main SERVER is not possible connection will fallback to this server.

       PORT_BACKUP
              FRN backup server port number

       VERSION
              Identify itself as a FRN client with this version.

       EMAIL_ADDRESS
              Your email address, which was used during registration.

       DYN_PASSWORD
              Password provided to you by FRN on registration.

       CLIENT_TYPE
              Type of the client:
              0 - crosslink
              1 - gateway
              2 - pc only

              Read more at http://freeradionetwork.eu/frnprotocol.htm web page.

       CALLSIGN_AND_USER
              Your callsign and user name used during registration, for example "1234, Bob".

       BAND_AND_CHANNEL
              In  case  of  PC  only  user,  this  is  'PC Only'.  In case of a crosslink this is
              'Crosslink'.  In case of a gateway this is  the  frequancy  in  full  Mhz  and  kHz
              separated by a
               '.'  (dot),  followed by the mode 'FM', 'AM' or 'DIG', followed by a space and the
              squelch type 'CTC', 'DSC' or 'NONE' followed by the CTC frequency or ID code.

              Examples:
              446.03125FM CTC131.8
              28.12500AM
              145.43750FM DCS828
              446.02625DIG CID123

       DESCRIPTION
              Custom extra information about the node.

       COUNTRY
              Full name of the country.

       CITY_CITY_PART
              The city and the part of the city, or the part of the country and the city  divided
              by a minus sign, for example "City - Street".

       NET    Network (room) where to connect, each server holds up to 32 networks (rooms).

       FRN_DEBUG
              Define  to  enable  extensive  module  logging,  including FRN request and response
              printout.

       DISABLE_RF
              Define to disable sending voice from FRN to RIG. Nothing  will  be  transmitted  by
              radio (could be switched ON by DTMF command later if needed)

FRN NEW USER REGISTRATION

       To  register  at  FRN service it is possible to use native desktop client or just register
       using netcat:

       echo 'IG:\
       <ON>[CallsignAndUser]</ON>\
       <EA>[EMailAddress]</EA>\
       <BC>[BandAndChannel]</BC>\
       <DS>[Description]</DS>\
       <NN>[Country]</NN>\
       <CT>[CityCityPart]</CT>' | nc -v sysman.freeradionetwork.eu 10025

       FRN System Manager should return OK in case of successful registration.

       More    information    about     new     user     registration     is     available     at
       http://freeradionetwork.eu/frnprotocol.htm

FILES

       /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
              The system wide configuration file.

       ~/.svxlink/svxlink.conf
              Per user configuration file.

       /etc/svxlink/svxlink.d/ModuleFrn.conf
              Global  modularized  configuration  file.  Depends  on  the  CFG_DIR  configuration
              variable setting.

       ~/.svxlink/svxlink.d/ModuleFrn.conf
              Per user modularized configuration  file.  Depends  on  the  CFG_DIR  configuration
              variable setting.

AUTHOR

       Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>

SEE ALSO

       svxlink.conf(5)