Provided by: systemd_242-7ubuntu3_amd64 bug

NAME

       systemd-boot, sd-boot - A simple UEFI boot manager

DESCRIPTION

       systemd-boot (short: sd-boot) is a simple UEFI boot manager. It provides a graphical menu
       to select the entry to boot and an editor for the kernel command line.  systemd-boot
       supports systems with UEFI firmware only.

       systemd-boot loads boot entry information from the EFI system partition (ESP), usually
       mounted at /efi/, /boot/, or /boot/efi/ during OS runtime, as well as from the Extended
       Boot Loader partition if it exists (usually mounted to /boot/). Configuration file
       fragments, kernels, initrds and other EFI images to boot generally need to reside on the
       ESP or the Extended Boot Loader partition. Linux kernels must be built with
       CONFIG_EFI_STUB to be able to be directly executed as an EFI image. During boot
       systemd-boot automatically assembles a list of boot entries from the following sources:

       ·   Boot entries defined with Boot Loader Specification[1] description files located in
           /loader/entries/ on the ESP and the Extended Boot Loader Partition. These usually
           describe Linux kernel images with associated initrd images, but alternatively may also
           describe arbitrary other EFI executables.

       ·   Unified kernel images following the Boot Loader Specification[1], as executable EFI
           binaries in /EFI/Linux/ on the ESP and the Extended Boot Loader Partition.

       ·   The Microsoft Windows EFI boot manager, if installed

       ·   The Apple MacOS X boot manager, if installed

       ·   The EFI Shell binary, if installed

       ·   A reboot into the UEFI firmware setup option, if supported by the firmware

       kernel-install(8) may be used to copy kernel images onto the ESP or the Extended Boot
       Loader Partition and to generate description files compliant with the Boot Loader
       Specification.  bootctl(1) may be used from a running system to locate the ESP and the
       Extended Boot Loader Partition, list available entries, and install systemd-boot itself.

       systemd-boot will provide information about the time spent in UEFI firmware using the Boot
       Loader Interface[2]. This information can be displayed using systemd-analyze(1).

KEY BINDINGS

       The following keys may be used in the boot menu:

       ↑ (Up), ↓ (Down), j, k, PageUp, PageDown, Home, End
           Navigate up/down in the entry list

       ↵ (Enter)
           Boot selected entry

       d
           Make selected entry the default

       e
           Edit the kernel command line for selected entry

       +, t
           Increase the timeout before default entry is booted

       -, T
           Decrease the timeout

       v
           Show systemd-boot, UEFI, and firmware versions

       P
           Print status

       Q
           Quit

       h, ?
           Show a help screen

       Ctrl+l
           Reprint the screen

       The following keys may be used during bootup or in the boot menu to directly boot a
       specific entry:

       l
           Linux

       w
           Windows

       a
           OS X

       s
           EFI shell

       1, 2, 3, 4, 5, 6, 7, 8, 9
           Boot entry number 1 ... 9

       In the editor, most keys simply insert themselves, but the following keys may be used to
       perform additional actions:

       ← (Left), → (Right), Home, End
           Navigate left/right

       Esc
           Abort the edit and quit the editor

       Ctrl+k
           Clear the command line

       Ctrl+w, Alt+Backspace
           Delete word backwards

       Alt+d
           Delete word forwards

       ↵ (Enter)
           Boot entry with the edited command line

       Note that unless configured otherwise in the UEFI firmware, systemd-boot will use the US
       keyboard layout, so key labels might not match for keys like +/-.

FILES

       The files systemd-boot processes generally reside on the UEFI ESP which is usually mounted
       to /efi/, /boot/ or /boot/efi/ during OS runtime. It also processes files on the Extended
       Boot Loader partition which is typically mounted to /boot/, if it exists.  systemd-boot
       reads runtime configuration such as the boot timeout and default entry from
       /loader/loader.conf on the ESP (in combination with data read from EFI variables). See
       loader.conf(5). Boot entry description files following the Boot Loader Specification[1]
       are read from /loader/entries/ on the ESP and the Extended Boot Loader partition. Unified
       kernel boot entries following the Boot Loader Specification[1] are read from /EFI/Linux/
       on the ESP and the Extended Boot Loader partition.

EFI VARIABLES

       The following EFI variables are defined, set and read by systemd-boot, under the vendor
       UUID "4a67b082-0a4c-41cf-b6c7-440b29bb8c4", for communication between the OS and the boot
       loader:

       LoaderBootCountPath
           If boot counting is enabled, contains the path to the file in whose name the boot
           counters are encoded. Set by the boot loader.  systemd-bless-boot.service(8) uses this
           information to mark a boot as successful as determined by the successful activation of
           the boot-complete.target target unit.

       LoaderConfigTimeout, LoaderConfigTimeoutOneShot
           The menu timeout in seconds. Read by the boot loader.  LoaderConfigTimeout is
           maintained persistently, while LoaderConfigTimeoutOneShot is a one-time override which
           is read once (in which case it takes precedence over LoaderConfigTimeout) and then
           removed.  LoaderConfigTimeout may be manipulated with the t/T keys, see above.)

       LoaderDevicePartUUID
           Contains the partition UUID of the EFI System Partition the boot loader was run from.
           Set by the boot loader.  systemd-gpt-auto-generator(8) uses this information to
           automatically find the disk booted from, in order to discover various other partitions
           on the same disk automatically.

       LoaderEntries
           A list of the identifiers of all discovered boot loader entries. Set by the boot
           loader.

       LoaderEntryDefault, LoaderEntryOneShot
           The identifier of the default boot loader entry. Set primarily by the OS and read by
           the boot loader.  LoaderEntryOneShot sets the default entry for the next boot only,
           while LoaderEntryDefault sets it persistently for all future boots.  bootctl(1)'s
           set-default and set-oneshot commands make use of these variables. The boot loader
           modifies LoaderEntryDefault on request, when the d key is used, see above.)

       LoaderEntrySelected
           The identifier of the boot loader entry currently being booted. Set by the boot
           loader.

       LoaderFeatures
           A set of flags indicating the features the boot loader supports. Set by the boot
           loader. Use bootctl(1) to view this data.

       LoaderFirmwareInfo, LoaderFirmwareType
           Brief firmware information. Set by the boot loader. Use bootctl(1) to view this data.

       LoaderImageIdentifier
           The path of executable of the boot loader used for the current boot, relative to the
           EFI System Partition's root directory. Set by the boot loader. Use bootctl(1) to view
           this data.

       LoaderInfo
           Brief information about the boot loader. Set by the boot loader. Use bootctl(1) to
           view this data.

       LoaderTimeExecUSec, LoaderTimeInitUSec, LoaderTimeMenuUsec
           Information about the time spent in various parts of the boot loader. Set by the boot
           loader. Use systemd-analyze(1) to view this data. These variables are defined by the
           Boot Loader Interface[2].

BOOT COUNTING

       systemd-boot implements a simple boot counting mechanism on top of the Boot Loader
       Specification[1], for automatic and unattended fallback to older kernel versions/boot
       loader entries when a specific entry continously fails. Any boot loader entry file and
       unified kernel image file that contains a "+" followed by one or two numbers (if two they
       need to be separated by a "-"), before the .conf or .efi suffix is subject to boot
       counting: the first of the two numbers ('tries left') is decreased by one on every boot
       attempt, the second of the two numbers ('tries done') is increased by one (if 'tries done'
       is absent it is considered equivalent to 0). Depending on the current value of these two
       counters the boot entry is considered to be in one of three states:

        1. If the 'tries left' counter of an entry is greater than zero the entry is considered
           to be in 'indeterminate' state. This means the entry has not completed booting
           successfully yet, but also hasn't been determined not to work.

        2. If the 'tries left' counter of an entry is zero it is considered to be in 'bad' state.
           This means no further attempts to boot this item will be made (that is, unless all
           other boot entries are also in 'bad' state), as all attempts to boot this entry have
           not completed successfully.

        3. If the 'tries left' and 'tries done' counters of an entry are absent it is considered
           to be in 'good' state. This means further boot counting for the entry is turned off,
           as it successfully booted at least once. The systemd-bless-boot.service(8) service
           moves the currently booted entry from 'indeterminate' into 'good' state when a boot
           attempt completed successfully.

       Generally, when new entries are added to the boot loader, they first start out in
       'indeterminate' state, i.e. with a 'tries left' counter greater than zero. The boot entry
       remains in this state until either it managed to complete a full boot successfully at
       least once (in which case it will be in 'good' state) — or the 'tries left' counter
       reaches zero (in which case it will be in 'bad' state).

       Example: let's say a boot loader entry file foo.conf is set up for 3 boot tries. The
       installer will hence create it under the name foo+3.conf. On first boot, the boot loader
       will rename it to foo+2-1.conf. If that boot does not complete successfully, the boot
       loader will rename it to foo+1-2.conf on the following boot. If that fails too, it will
       finally be renamed foo+0-3.conf by the boot loader on next boot, after which it will be
       considered 'bad'. If the boot succeeds however the entry file will be renamed to foo.conf
       by the OS, so that it is considered 'good' from then on.

       The boot menu takes the 'tries left' counter into account when sorting the menu entries:
       entries in 'bad' state are ordered at the end of the list, and entries in 'good' or
       'indeterminate' at the beginning. The user can freely choose to boot any entry of the
       menu, including those already marked 'bad'. If the menu entry to boot is automatically
       determined, this means that 'good' or 'indeterminate' entries are generally preferred (as
       the top item of the menu is the one booted by default), and 'bad' entries will only be
       considered if there are no 'good' or 'indeterminate' entries left.

       The kernel-install(8) kernel install framework optionally sets the initial 'tries left'
       counter to the value specified in /etc/kernel/tries when a boot loader entry is first
       created.

SEE ALSO

       bootctl(1), loader.conf(5), systemd-bless-boot.service(8), kernel-install(8), Boot Loader
       Specification[1], Boot Loader Interface[2]

NOTES

        1. Boot Loader Specification
           https://systemd.io/BOOT_LOADER_SPECIFICATION

        2. Boot Loader Interface
           https://systemd.io/BOOT_LOADER_INTERFACE