Provided by: fence-agents_4.4.0-2_amd64 bug

NAME

       fence_docker - Fence agent for Docker

DESCRIPTION

       fence_docker is I/O fencing agent which can be used with the Docker Engine containers. You
       can use this fence-agent without any authentication, or you  can  use  TLS  authentication
       (use    --ssl    option,    more    info    about    TLS    authentication    in   docker:
       http://docs.docker.com/examples/https/).

       fence_docker accepts options on the command line as  well  as  from  stdin.  Fenced  sends
       parameters  through  stdin when it execs the agent. fence_docker can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: www.docker.io

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP  address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 80)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: onoff)

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -z, --ssl
              Use SSL connection with verifying certificate

       --ssl-insecure
              Use SSL connection without verifying certificate

       --ssl-secure
              Use SSL connection with verifying certificate

       --api-version
              Version of Docker Remote API (default: 1.11) (Default Value: 1.11)

       --tlscacert
              Path  to  CA  certificate  (PEM  format)  for TLS authentication. Required if --ssl
              option is used.

       --tlscert
              Path to client certificate (PEM format) for TLS authentication. Required  if  --ssl
              option is used.

       --tlskey
              Path to client key (PEM format) for TLS authentication. Required if --ssl option is
              used.

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --gnutlscli-path=[path]
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP  address  or  hostname  of  fencing  device  This  parameter is always required.
              Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 80)

       method Method to fence (onoff|cycle) (Default Value: onoff)

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       ssl    Use SSL connection with verifying certificate

       ssl_insecure
              Use SSL connection without verifying certificate

       ssl_secure
              Use SSL connection with verifying certificate

       api_version
              Version of Docker Remote API (default: 1.11) (Default Value: 1.11)

       tlscacert
              Path  to  CA  certificate  (PEM  format)  for TLS authentication. Required if --ssl
              option is used.

       tlscert
              Path to client certificate (PEM format) for TLS authentication. Required  if  --ssl
              option is used.

       tlskey Path to client key (PEM format) for TLS authentication. Required if --ssl option is
              used.

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       gnutlscli_path
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)