Provided by: fence-agents_4.4.0-2_amd64 bug

NAME

       fence_powerman - Fence Agent for Powerman

DESCRIPTION

       This  is a Pacemaker Fence Agent for the Powerman management utility that was designed for
       LLNL systems.

       fence_powerman accepts options on the command line as well as  from  stdin.  Fenced  sends
       parameters through stdin when it execs the agent. fence_powerman can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: https://github.com/chaos/powerman

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 10101)

       -n, --plug=[ip]
              IP address or hostname of fencing device (together with --port-as-ip)

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 3)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 3)

       --powerman-path=[path]
              Path to powerman binary (Default Value: /usr/bin/powerman)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP address or hostname of fencing device Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 10101)

       plug   IP address or hostname of fencing device (together  with  --port-as-ip)  Obsoletes:
              port

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing is started (Default Value: 3)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 3)

       powerman_path
              Path to powerman binary (Default Value: /usr/bin/powerman)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)