Provided by: ipmiutil_3.1.4-1build1_amd64 bug


       ipmiutil_smcoem - OEM commands for SuperMicro servers


       ipmiutil smcoem [-mx -NPRUEFJTVY] commands


       ipmiutil  smcoem is a function that uses SuperMicro OEM IPMI commands to perform platform-
       specific functions.


       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).  This could  be  used  for
              PICMG  or  ATCA  blade  systems.  The trailing character, if present, indicates SMI
              addressing if 's', or IPMB addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address of the remote target system.  If a  nodename  is  specified,
              IPMI  LAN  interface  is  used.  Otherwise the local system management interface is

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force the driver type to one of the followng: imb, va,  open,  gnu,  landesk,  lan,
              lan2,  lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default is
              to detect any available driver type and use it.

       -J     Use  the  specified  LanPlus  cipher   suite   (0   thru   17):   0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication  Type:  0=None,  1=MD2,  2=MD5,  4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote  password.   Alternatives  for  the
              password are -E or -P.



              This command resets any chassis intrusion condition that may have occurred.

       bmcstatus [enable|disable]
              This  command  gets  or  sets the BMC service status.  Alone, without arguments, it
              gets the BMC status as either enabled or disabled.   With  an  argument  of  either
              enable or disable, it will also set the BMC status as specified.


              This command gets the extra firmware version information, if available.

       lanport [dedicated|lan1|failover]
              This  command  gets or sets the IPMI LAN interface port.  If set to dedicated, only
              the dedicated IPMI NIC can be configured for IPMI LAN.  If set to  lan1,  only  the
              first  onboard NIC (LAN1) can be configured for IPMI LAN.  If set to failover, both
              the dedicated and onboard LAN1 port would be configured for IPMI LAN, with the same
              IP address.


       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8) ievents(8) ifru(8) igetevent(8)
       ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8)


       See for the latest version of ipmiutil and  any  bug  fix


       Copyright (C) 2013  Andy Cress

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.


       Andy Cress <arcress at>

                                     Version 1.0: 05 Apr 2013                          ISMCOEM(8)