Provided by: lvm2_2.03.02-2ubuntu6_amd64 bug

NAME

       vgreduce - Remove physical volume(s) from a volume group

SYNOPSIS

       vgreduce option_args position_args
           [ option_args ]

        -a|--all
        -A|--autobackup y|n
           --commandprofile String
           --config String
        -d|--debug
           --driverloaded y|n
        -f|--force
        -h|--help
           --lockopt String
           --longhelp
           --mirrorsonly
           --nolocking
           --profile String
        -q|--quiet
           --removemissing
           --reportformat basic|json
        -t|--test
        -v|--verbose
           --version
        -y|--yes

DESCRIPTION

       vgreduce removes one or more unused PVs from a VG.

USAGE

       Remove a PV from a VG.

       vgreduce VG PV ...
           [ COMMON_OPTIONS ]
       -

       Remove all unused PVs from a VG.

       vgreduce -a|--all VG
           [ COMMON_OPTIONS ]
       -

       Remove all missing PVs from a VG.

       vgreduce --removemissing VG
           [    --mirrorsonly ]
           [ COMMON_OPTIONS ]
       -

       Common options for command:
           [ -A|--autobackup y|n ]
           [ -f|--force ]
           [    --reportformat basic|json ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       -a|--all
              Removes all empty PVs if none are named on the command line.

       -A|--autobackup y|n
              Specifies if metadata should be backed up automatically after a change.  Enabling
              this is strongly advised! See vgcfgbackup(8) for more information.

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more
              information.

       --longhelp
              Display long help text.

       --mirrorsonly
              Only remove missing PVs from mirror LVs.

       --nolocking
              Disable locking.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --removemissing
              Removes all missing PVs from the VG, if there are no LVs allocated on them. This
              resumes normal operation of the VG (new LVs may again be created, changed and so
              on).  If this is not possible because LVs are referencing the missing PVs, this
              option can be combined with --force to have the command remove any partial LVs. In
              this case, any LVs and dependent snapshots that were partly on the missing disks
              are removed completely, including those parts on disks that are still present.  If
              LVs spanned several disks, including ones that are lost, salvaging some data first
              may be possible by activating LVs in partial mode.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the
              report/output_format setting in lvm.conf.  basic is the original format with
              columns and rows.  If there is more than one report per command, each report is
              prefixed with the report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG
              Volume Group name.  See lvm(8) for valid names.

       PV
              Physical  Volume  name,  a  device path under /dev.  For commands managing physical
              extents, a PV positional arg generally accepts a  suffix  indicating  a  range  (or
              multiple  ranges)  of  physical  extents  (PEs).  When  the first PE is omitted, it
              defaults to the start of the device, and when the last PE is omitted it defaults to
              end.   Start  and  end  range  (inclusive):  PV[:PE-PE]...   Start and length range
              (counting from 0): PV[:PE+PE]...

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional  unit.   Input  units  are  always
              treated  as  base  two  values, regardless of capitalization, e.g. 'k' and 'K' both
              refer to 1024.  The default input unit is specified by letter, followed  by  |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is
              sectors of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T  is
              terabytes,  p|P  is  petabytes, e|E is exabytes.  (This should not be confused with
              the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for  information  about  environment  variables  used  by  lvm.   For  example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8) pvresize(8) pvs(8)
       pvscan(8)

       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)  vgconvert(8)  vgdisplay(8)
       vgexport(8)  vgextend(8)  vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)
       vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8) lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvreduce(8)  lvremove(8)
       lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)