Provided by: zsh-common_5.8-3ubuntu1.1_all bug

NAME

       zshparam - zsh parameters

DESCRIPTION

       A  parameter  has a name, a value, and a number of attributes.  A name may be any sequence
       of alphanumeric characters and underscores, or the single characters `*', `@',  `#',  `?',
       `-',  `$',  or  `!'.   A parameter whose name begins with an alphanumeric or underscore is
       also referred to as a variable.

       The attributes of a parameter determine the type of its value, often referred  to  as  the
       parameter  type or variable type, and also control other processing that may be applied to
       the value when it is referenced.  The value type may be a scalar (a string, an integer, or
       a  floating  point  number),  an  array (indexed numerically), or an associative array (an
       unordered set of name-value pairs, indexed by name, also referred to as a hash).

       Named scalar parameters may have the exported,  -x,  attribute,  to  copy  them  into  the
       process  environment,  which  is  then  passed from the shell to any new processes that it
       starts.  Exported parameters are called environment  variables.  The  shell  also  imports
       environment variables at startup time and automatically marks the corresponding parameters
       as exported.  Some environment variables are not  imported  for  reasons  of  security  or
       because they would interfere with the correct operation of other shell features.

       Parameters  may  also be special, that is, they have a predetermined meaning to the shell.
       Special parameters cannot have their type changed or their readonly attribute turned  off,
       and  if a special parameter is unset, then later recreated, the special properties will be
       retained.

       To declare the type of a parameter, or to assign a string or numeric  value  to  a  scalar
       parameter, use the typeset builtin.

       The value of a scalar parameter may also be assigned by writing:

              name=value

       In  scalar  assignment,  value  is  expanded  as a single string, in which the elements of
       arrays are joined  together;  filename  expansion  is  not  performed  unless  the  option
       GLOB_ASSIGN is set.

       When  the integer attribute, -i, or a floating point attribute, -E or -F, is set for name,
       the value is subject to arithmetic evaluation.  Furthermore, by replacing `=' with `+=', a
       parameter  can  be  incremented  or  appended  to.  See the section `Array Parameters' and
       Arithmetic Evaluation (in zshmisc(1)) for additional forms of assignment.

       Note that assignment may implicitly change the attributes of a  parameter.   For  example,
       assigning  a  number to a variable in arithmetic evaluation may change its type to integer
       or float, and with GLOB_ASSIGN assigning a pattern to a variable may change its type to an
       array.

       To  reference  the  value  of  a  parameter,  write  `$name'  or `${name}'.  See Parameter
       Expansion in zshexpn(1) for complete details.  That section also explains  the  effect  of
       the difference between scalar and array assignment on parameter expansion.

ARRAY PARAMETERS

       To assign an array value, write one of:

              set -A name value ...
              name=(value ...)
              name=([key]=value ...)

       If  no  parameter  name  exists, an ordinary array parameter is created.  If the parameter
       name exists and is a scalar, it is replaced by a new array.

       In the third form, key is an expression that will be evaluated in arithmetic  context  (in
       its  simplest  form,  an  integer) that gives the index of the element to be assigned with
       value.  In this form any elements not explicitly mentioned that come  before  the  largest
       index  to  which  a value is assigned are assigned an empty string.  The indices may be in
       any order.  Note that this syntax is strict: [ and ]= must not be quoted, and key may  not
       consist  of  the  unquoted  string  ]=,  but is otherwise treated as a simple string.  The
       enhanced forms of subscript expression that may  be  used  when  directly  subscripting  a
       variable name, described in the section Array Subscripts below, are not available.

       The  syntaxes  with and without the explicit key may be mixed.  An implicit key is deduced
       by incrementing the index from the previously assigned  element.   Note  that  it  is  not
       treated as an error if latter assignments in this form overwrite earlier assignments.

       For example, assuming the option KSH_ARRAYS is not set, the following:

              array=(one [3]=three four)

       causes  the  array variable array to contain four elements one, an empty string, three and
       four, in that order.

       In the forms where only value is specified, full command line expansion is performed.

       In the [key]=value form, both key and value undergo all forms  of  expansion  allowed  for
       single  word  shell  expansions  (this does not include filename generation); these are as
       performed by the  parameter  expansion  flag  (e)  as  described  in  zshexpn(1).   Nested
       parentheses may surround value and are included as part of the value, which is joined into
       a plain string; this differs from ksh which allows the values themselves to be arrays.   A
       future  version  of  zsh  may  support that.  To cause the brackets to be interpreted as a
       character class for filename generation, and therefore to  treat  the  resulting  list  of
       files as a set of values, quote the equal sign using any form of quoting.  Example:

              name=([a-z]'='*)

       To append to an array without changing the existing values, use one of the following:

              name+=(value ...)
              name+=([key]=value ...)

       In  the  second  form key may specify an existing index as well as an index off the end of
       the old array; any existing value is overwritten by value.  Also, it is  possible  to  use
       [key]+=value to append to the existing value at that index.

       Within  the  parentheses on the right hand side of either form of the assignment, newlines
       and semicolons are treated the same as white space,  separating  individual  values.   Any
       consecutive sequence of such characters has the same effect.

       Ordinary array parameters may also be explicitly declared with:

              typeset -a name

       Associative arrays must be declared before assignment, by using:

              typeset -A name

       When  name  refers  to  an  associative array, the list in an assignment is interpreted as
       alternating keys and values:

              set -A name key value ...
              name=(key value ...)
              name=([key]=value ...)

       Note that only one of the two syntaxes above may be used  in  any  given  assignment;  the
       forms may not be mixed.  This is unlike the case of numerically indexed arrays.

       Every  key  must  have  a value in this case.  Note that this assigns to the entire array,
       deleting any elements that do not appear in the list.  The append syntax may also be  used
       with an associative array:

              name+=(key value ...)
              name+=([key]=value ...)

       This  adds  a new key/value pair if the key is not already present, and replaces the value
       for the existing key if it is.  In the second form it is also possible to use [key]+=value
       to  append  to  the existing value at that key.  Expansion is performed identically to the
       corresponding forms for normal arrays, as described above.

       To create an empty array (including associative arrays), use one of:

              set -A name
              name=()

   Array Subscripts
       Individual elements of an array may be selected using a subscript.   A  subscript  of  the
       form  `[exp]'  selects the single element exp, where exp is an arithmetic expression which
       will be subject to arithmetic expansion as if  it  were  surrounded  by  `$((...))'.   The
       elements  are numbered beginning with 1, unless the KSH_ARRAYS option is set in which case
       they are numbered from zero.

       Subscripts may be used inside braces used to delimit a parameter name, thus `${foo[2]}' is
       equivalent to `$foo[2]'.  If the KSH_ARRAYS option is set, the braced form is the only one
       that works, as bracketed expressions otherwise are not treated as subscripts.

       If the KSH_ARRAYS option is not set, then by default accesses to an array element  with  a
       subscript that evaluates to zero return an empty string, while an attempt to write such an
       element is treated as an error.  For backward compatibility the KSH_ZERO_SUBSCRIPT  option
       can  be set to cause subscript values 0 and 1 to be equivalent; see the description of the
       option in zshoptions(1).

       The same subscripting syntax is used for associative arrays,  except  that  no  arithmetic
       expansion  is applied to exp.  However, the parsing rules for arithmetic expressions still
       apply, which affects the way that  certain  special  characters  must  be  protected  from
       interpretation.  See Subscript Parsing below for details.

       A  subscript of the form `[*]' or `[@]' evaluates to all elements of an array; there is no
       difference between the two except when they  appear  within  double  quotes.   `"$foo[*]"'
       evaluates  to  `"$foo[1]  $foo[2]  ..."',  whereas  `"$foo[@]"'  evaluates  to  `"$foo[1]"
       "$foo[2]" ...'.  For associative arrays, `[*]' or `[@]' evaluate to all the values, in  no
       particular  order.  Note that this does not substitute the keys; see the documentation for
       the `k' flag under Parameter Expansion Flags in zshexpn(1) for complete details.  When  an
       array  parameter  is referenced as `$name' (with no subscript) it evaluates to `$name[*]',
       unless the KSH_ARRAYS option is set in which case it evaluates  to  `${name[0]}'  (for  an
       associative  array, this means the value of the key `0', which may not exist even if there
       are values for other keys).

       A subscript of the form `[exp1,exp2]' selects all elements in  the  range  exp1  to  exp2,
       inclusive. (Associative arrays are unordered, and so do not support ranges.) If one of the
       subscripts evaluates to a negative number, say -n, then the nth element from  the  end  of
       the  array  is  used.  Thus `$foo[-3]' is the third element from the end of the array foo,
       and `$foo[1,-1]' is the same as `$foo[*]'.

       Subscripting may also be performed on non-array  values,  in  which  case  the  subscripts
       specify  a  substring to be extracted.  For example, if FOO is set to `foobar', then `echo
       $FOO[2,5]' prints `ooba'.  Note that some forms of subscripting  described  below  perform
       pattern  matching,  and  in that case the substring extends from the start of the match of
       the first subscript to the end of the match of the second subscript.  For example,

              string="abcdefghijklm"
              print ${string[(r)d?,(r)h?]}

       prints `defghi'.  This is an obvious  generalisation  of  the  rule  for  single-character
       matches.   For a single subscript, only a single character is referenced (not the range of
       characters covered by the match).

       Note that in substring operations the second subscript is handled differently by the r and
       R  subscript  flags:  the former takes the shortest match as the length and the latter the
       longest match.  Hence in the former case a * at the end is redundant while in  the  latter
       case it matches the whole remainder of the string.  This does not affect the result of the
       single subscript case as here the length of the match is irrelevant.

   Array Element Assignment
       A subscript may be used on the left side of an assignment like so:

              name[exp]=value

       In this form of assignment the element or range  specified  by  exp  is  replaced  by  the
       expression  on  the right side.  An array (but not an associative array) may be created by
       assignment to a range or element.  Arrays do not nest, so assigning a  parenthesized  list
       of values to an element or range changes the number of elements in the array, shifting the
       other elements to accommodate the new values.  (This  is  not  supported  for  associative
       arrays.)

       This syntax also works as an argument to the typeset command:

              typeset "name[exp]"=value

       The  value  may  not be a parenthesized list in this case; only single-element assignments
       may be made with typeset.  Note that quotes are necessary in  this  case  to  prevent  the
       brackets  from  being interpreted as filename generation operators.  The noglob precommand
       modifier could be used instead.

       To delete an element of an ordinary array, assign `()' to  that  element.   To  delete  an
       element of an associative array, use the unset command:

              unset "name[exp]"

   Subscript Flags
       If  the  opening bracket, or the comma in a range, in any subscript expression is directly
       followed by an opening  parenthesis,  the  string  up  to  the  matching  closing  one  is
       considered to be a list of flags, as in `name[(flags)exp]'.

       The  flags  s,  n  and  b  take  an argument; the delimiter is shown below as `:', but any
       character, or the matching pairs `(...)', `{...}', `[...]', or `<...>', may be  used,  but
       note  that  `<...>' can only be used if the subscript is inside a double quoted expression
       or a parameter substitution enclosed in braces as otherwise the expression is  interpreted
       as a redirection.

       The flags currently understood are:

       w      If  the parameter subscripted is a scalar then this flag makes subscripting work on
              words instead of characters.  The  default  word  separator  is  whitespace.   When
              combined  with  the  i  or  I flag, the effect is to produce the index of the first
              character of the first/last word which matches  the  given  pattern;  note  that  a
              failed match in this case always yields 0.

       s:string:
              This  gives  the  string  that  separates  words  (for  use  with the w flag).  The
              delimiter character : is arbitrary; see above.

       p      Recognize the same escape sequences as the print builtin in the string argument  of
              a subsequent `s' flag.

       f      If  the parameter subscripted is a scalar then this flag makes subscripting work on
              lines instead of characters, i.e. with elements separated by newlines.  This  is  a
              shorthand for `pws:\n:'.

       r      Reverse  subscripting: if this flag is given, the exp is taken as a pattern and the
              result is the first matching array element, substring or word (if the parameter  is
              an  array,  if  it  is  a  scalar,  or if it is a scalar and the `w' flag is given,
              respectively).  The subscript used is the number of the matching element,  so  that
              pairs of subscripts such as `$foo[(r)??,3]' and `$foo[(r)??,(r)f*]' are possible if
              the parameter is not an associative array.  If  the  parameter  is  an  associative
              array,  only the value part of each pair is compared to the pattern, and the result
              is that value.

              If a search through an ordinary array failed, the search sets the subscript to  one
              past the end of the array, and hence ${array[(r)pattern]} will substitute the empty
              string.  Thus the success of a search can be tested by  using  the  (i)  flag,  for
              example (assuming the option KSH_ARRAYS is not in effect):

                     [[ ${array[(i)pattern]} -le ${#array} ]]

              If KSH_ARRAYS is in effect, the -le should be replaced by -lt.

       R      Like  `r',  but  gives  the last match.  For associative arrays, gives all possible
              matches. May be used  for  assigning  to  ordinary  array  elements,  but  not  for
              assigning to associative arrays.  On failure, for normal arrays this has the effect
              of returning the element corresponding to subscript 0; this is empty unless one  of
              the options KSH_ARRAYS or KSH_ZERO_SUBSCRIPT is in effect.

              Note that in subscripts with both `r' and `R' pattern characters are active even if
              they were substituted for a parameter (regardless  of  the  setting  of  GLOB_SUBST
              which controls this feature in normal pattern matching).  The flag `e' can be added
              to inhibit pattern matching.   As  this  flag  does  not  inhibit  other  forms  of
              substitution,  care  is  still  required; using a parameter to hold the key has the
              desired effect:

                     key2='original key'
                     print ${array[(Re)$key2]}

       i      Like `r', but gives the index of the match instead; this may not be combined with a
              second  argument.   On  the  left  side  of  an  assignment, behaves like `r'.  For
              associative arrays, the key part of each pair is compared to the pattern,  and  the
              first  matching  key found is the result.  On failure substitutes the length of the
              array plus one, as discussed under the description of `r', or the empty string  for
              an associative array.

       I      Like  `i',  but gives the index of the last match, or all possible matching keys in
              an associative array.  On failure  substitutes  0,  or  the  empty  string  for  an
              associative  array.   This flag is best when testing for values or keys that do not
              exist.

       k      If used in a subscript on an associative array, this flag causes  the  keys  to  be
              interpreted as patterns, and returns the value for the first key found where exp is
              matched by the key.  Note this could be any such key as no ordering of  associative
              arrays is defined.  This flag does not work on the left side of an assignment to an
              associative array element.  If used on another type of parameter, this behaves like
              `r'.

       K      On  an  associative  array  this  is  like  `k' but returns all values where exp is
              matched by the keys.  On other types of parameters this has the same effect as `R'.

       n:expr:
              If combined with `r', `R', `i' or `I', makes them give the nth or  nth  last  match
              (if expr evaluates to n).  This flag is ignored when the array is associative.  The
              delimiter character : is arbitrary; see above.

       b:expr:
              If combined with `r', `R', `i' or `I', makes them begin at  the  nth  or  nth  last
              element,  word,  or  character (if expr evaluates to n).  This flag is ignored when
              the array is associative.  The delimiter character : is arbitrary; see above.

       e      This flag causes any pattern matching that would be performed on the  subscript  to
              use  plain string matching instead.  Hence `${array[(re)*]}' matches only the array
              element whose value is *.  Note that other forms of substitution such as  parameter
              substitution are not inhibited.

              This flag can also be used to force * or @ to be interpreted as a single key rather
              than as a reference to all values.  It may be used for either purpose on  the  left
              side of an assignment.

       See  Parameter  Expansion Flags (zshexpn(1)) for additional ways to manipulate the results
       of array subscripting.

   Subscript Parsing
       This discussion applies mainly to associative array key strings and to patterns  used  for
       reverse  subscripting  (the  `r',  `R', `i', etc. flags), but it may also affect parameter
       substitutions that appear as part of an arithmetic expression in an ordinary subscript.

       To avoid subscript parsing limitations in assignments to associative array  elements,  use
       the append syntax:

              aa+=('key with "*strange*" characters' 'value string')

       The  basic  rule  to remember when writing a subscript expression is that all text between
       the opening `[' and the closing `]' is interpreted as if it were  in  double  quotes  (see
       zshmisc(1)).   However,  unlike  double  quotes  which  normally  cannot  nest,  subscript
       expressions may appear inside double-quoted strings or inside other subscript  expressions
       (or both!), so the rules have two important differences.

       The  first  difference  is  that brackets (`[' and `]') must appear as balanced pairs in a
       subscript expression unless they are preceded by a backslash (`\').  Therefore,  within  a
       subscript  expression  (and unlike true double-quoting) the sequence `\[' becomes `[', and
       similarly `\]' becomes `]'.  This applies even in cases where a backslash is not  normally
       required;  for  example,  the  pattern  `[^[]'  (to match any character other than an open
       bracket) should be written `[^\[]' in a reverse-subscript  pattern.   However,  note  that
       `\[^\[\]'  and  even  `\[^[]' mean the same thing, because backslashes are always stripped
       when they appear before brackets!

       The same rule applies to parentheses (`(' and `)') and braces (`{'  and  `}'):  they  must
       appear  either  in balanced pairs or preceded by a backslash, and backslashes that protect
       parentheses or braces are removed during parsing.  This is  because  parameter  expansions
       may  be  surrounded  by  balanced  braces,  and subscript flags are introduced by balanced
       parentheses.

       The second difference is that a double-quote (`"') may  appear  as  part  of  a  subscript
       expression  without  being  preceded by a backslash, and therefore that the two characters
       `\"' remain as two characters in the subscript (in true double-quoting, `\"' becomes `"').
       However,  because  of the standard shell quoting rules, any double-quotes that appear must
       occur in balanced pairs unless preceded by a backslash.  This makes it more  difficult  to
       write  a  subscript expression that contains an odd number of double-quote characters, but
       the reason for this difference is so that when a subscript expression appears inside  true
       double-quotes, one can still write `\"' (rather than `\\\"') for `"'.

       To  use  an odd number of double quotes as a key in an assignment, use the typeset builtin
       and an enclosing pair of double quotes; to refer to the  value  of  that  key,  again  use
       double quotes:

              typeset -A aa
              typeset "aa[one\"two\"three\"quotes]"=QQQ
              print "$aa[one\"two\"three\"quotes]"

       It  is  important  to note that the quoting rules do not change when a parameter expansion
       with a subscript is nested inside another  subscript  expression.   That  is,  it  is  not
       necessary  to  use  additional backslashes within the inner subscript expression; they are
       removed only once, from the innermost subscript outwards.  Parameters  are  also  expanded
       from  the innermost subscript first, as each expansion is encountered left to right in the
       outer expression.

       A further complication arises from a way in which subscript parsing is not different  from
       double  quote  parsing.  As in true double-quoting, the sequences `\*', and `\@' remain as
       two characters when they appear in a subscript expression.  To use a literal `*' or `@' as
       an associative array key, the `e' flag must be used:

              typeset -A aa
              aa[(e)*]=star
              print $aa[(e)*]

       A  last  detail  must  be  considered  when reverse subscripting is performed.  Parameters
       appearing in the subscript expression are first expanded and then the complete  expression
       is  interpreted  as  a  pattern.   This  has  two  effects: first, parameters behave as if
       GLOB_SUBST were on (and it cannot be turned  off);  second,  backslashes  are  interpreted
       twice,  once  when  parsing  the array subscript and again when parsing the pattern.  In a
       reverse subscript, it's necessary to use four backslashes to cause a single  backslash  to
       match  literally  in the pattern.  For complex patterns, it is often easiest to assign the
       desired pattern to a parameter and then refer to that parameter in the subscript,  because
       then  the  backslashes,  brackets,  parentheses,  etc.,  are  seen  only when the complete
       expression is converted to a pattern.  To match the value of a parameter  literally  in  a
       reverse  subscript,  rather  than as a pattern, use `${(q)name}' (see zshexpn(1)) to quote
       the expanded value.

       Note that the `k' and `K' flags are reverse subscripting for an ordinary  array,  but  are
       not reverse subscripting for an associative array!  (For an associative array, the keys in
       the array itself are interpreted as patterns by those flags;  the  subscript  is  a  plain
       string in that case.)

       One  final  note,  not  directly  related to subscripting: the numeric names of positional
       parameters (described below) are parsed specially, so for example `$2foo' is equivalent to
       `${2}foo'.   Therefore,  to  use subscript syntax to extract a substring from a positional
       parameter, the expansion must be surrounded by braces; for example, `${2[3,5]}'  evaluates
       to the third through fifth characters of the second positional parameter, but `$2[3,5]' is
       the entire second parameter concatenated with the filename generation pattern `[3,5]'.

POSITIONAL PARAMETERS

       The positional parameters  provide  access  to  the  command-line  arguments  of  a  shell
       function,  shell  script,  or the shell itself; see the section `Invocation', and also the
       section `Functions'.  The parameter n,  where  n  is  a  number,  is  the  nth  positional
       parameter.   The  parameter `$0' is a special case, see the section `Parameters Set By The
       Shell'.

       The parameters *, @ and argv are arrays containing all  the  positional  parameters;  thus
       `$argv[n]',  etc.,  is  equivalent  to  simply  `$n'.  Note that the options KSH_ARRAYS or
       KSH_ZERO_SUBSCRIPT apply to these arrays as well, so with either  of  those  options  set,
       `${argv[0]}' is equivalent to `$1' and so on.

       Positional  parameters  may be changed after the shell or function starts by using the set
       builtin, by assigning to the argv array, or by direct assignment  of  the  form  `n=value'
       where  n is the number of the positional parameter to be changed.  This also creates (with
       empty values) any of the positions from 1 to n that do  not  already  have  values.   Note
       that,  because  the  positional  parameters form an array, an array assignment of the form
       `n=(value ...)' is allowed, and has the effect of shifting all  the  values  at  positions
       greater than n by as many positions as necessary to accommodate the new values.

LOCAL PARAMETERS

       Shell   function   executions  delimit  scopes  for  shell  parameters.   (Parameters  are
       dynamically scoped.)  The typeset builtin, and its  alternative  forms  declare,  integer,
       local  and readonly (but not export), can be used to declare a parameter as being local to
       the innermost scope.

       When a parameter is read or assigned to, the innermost existing parameter of that name  is
       used.   (That is, the local parameter hides any less-local parameter.)  However, assigning
       to a non-existent parameter, or declaring a new parameter with export,  causes  it  to  be
       created in the outermost scope.

       Local parameters disappear when their scope ends.  unset can be used to delete a parameter
       while it is still in scope; any outer parameter of the same name remains hidden.

       Special parameters may also be made local; they retain  their  special  attributes  unless
       either  the existing or the newly-created parameter has the -h (hide) attribute.  This may
       have unexpected effects: there is no default value, so if there is no  assignment  at  the
       point the variable is made local, it will be set to an empty value (or zero in the case of
       integers).  The following:

              typeset PATH=/new/directory:$PATH

       is valid for temporarily allowing the shell or programmes  called  from  it  to  find  the
       programs in /new/directory inside a function.

       Note  that  the  restriction  in  older  versions  of zsh that local parameters were never
       exported has been removed.

PARAMETERS SET BY THE SHELL

       In the parameter lists that follow,  the  mark  `<S>'  indicates  that  the  parameter  is
       special.   `<Z>' indicates that the parameter does not exist when the shell initializes in
       sh or ksh emulation mode.

       The following parameters are automatically set by the shell:

       ! <S>  The process ID of the last command started in the background with &, put  into  the
              background with the bg builtin, or spawned with coproc.

       # <S>  The number of positional parameters in decimal.  Note that some confusion may occur
              with the syntax $#param which substitutes the length of param.  Use ${#} to resolve
              ambiguities.   In  particular, the sequence `$#-...' in an arithmetic expression is
              interpreted as the length of the parameter -, q.v.

       ARGC <S> <Z>
              Same as #.

       $ <S>  The process ID of this shell.  Note that this indicates the original shell  started
              by  invoking  zsh;  all  processes  forked  from the shells without executing a new
              program, such as subshells started by (...), substitute the same value.

       - <S>  Flags supplied to the shell on invocation or by the set or setopt commands.

       * <S>  An array containing the positional parameters.

       argv <S> <Z>
              Same as *.  Assigning to argv changes the local positional parameters, but argv  is
              not  itself a local parameter.  Deleting argv with unset in any function deletes it
              everywhere, although only the innermost positional parameter array is deleted (so *
              and @ in other scopes are not affected).

       @ <S>  Same as argv[@], even when argv is not set.

       ? <S>  The exit status returned by the last command.

       0 <S>  The  name used to invoke the current shell, or as set by the -c command line option
              upon invocation.  If the FUNCTION_ARGZERO option is set, $0 is set upon entry to  a
              shell  function  to the name of the function, and upon entry to a sourced script to
              the name of the script, and reset to its previous value when the function or script
              returns.

       status <S> <Z>
              Same as ?.

       pipestatus <S> <Z>
              An  array  containing  the  exit  statuses  returned  by  all  commands in the last
              pipeline.

       _ <S>  The last argument of the previous command.  Also, this  parameter  is  set  in  the
              environment of every command executed to the full pathname of the command.

       CPUTYPE
              The  machine  type  (microprocessor  class  or machine model), as determined at run
              time.

       EGID <S>
              The effective group ID of the shell process.  If you  have  sufficient  privileges,
              you  may  change  the  effective group ID of the shell process by assigning to this
              parameter.  Also (assuming sufficient privileges), you may start a  single  command
              with a different effective group ID by `(EGID=gid; command)'

              If  this  is  made  local, it is not implicitly set to 0, but may be explicitly set
              locally.

       EUID <S>
              The effective user ID of the shell process.  If you have sufficient privileges, you
              may  change  the  effective  user  ID  of  the  shell  process by assigning to this
              parameter.  Also (assuming sufficient privileges), you may start a  single  command
              with a different effective user ID by `(EUID=uid; command)'

              If  this  is  made  local, it is not implicitly set to 0, but may be explicitly set
              locally.

       ERRNO <S>
              The value of errno (see errno(3)) as set by the most recently failed  system  call.
              This  value is system dependent and is intended for debugging purposes.  It is also
              useful with the zsh/system module which allows the number to be turned into a  name
              or message.

       FUNCNEST <S>
              Integer.   If  greater  than  or  equal to zero, the maximum nesting depth of shell
              functions.  When it is exceeded, an error is raised at the point where  a  function
              is  called.   The  default value is determined when the shell is configured, but is
              typically 500.  Increasing the value increases the danger  of  a  runaway  function
              recursion  causing  the  shell  to  crash.   Setting a negative value turns off the
              check.

       GID <S>
              The real group ID of the shell process.  If you have sufficient privileges, you may
              change  the  group  ID  of  the shell process by assigning to this parameter.  Also
              (assuming sufficient privileges), you may start a single command under a  different
              group ID by `(GID=gid; command)'

              If  this  is  made  local, it is not implicitly set to 0, but may be explicitly set
              locally.

       HISTCMD
              The current history event number in an interactive shell, in other words the  event
              number  for  the  command  that caused $HISTCMD to be read.  If the current history
              event modifies the history, HISTCMD  changes  to  the  new  maximum  history  event
              number.

       HOST   The current hostname.

       LINENO <S>
              The  line  number  of  the current line within the current script, sourced file, or
              shell function being executed, whichever was started most recently.  Note  that  in
              the  case  of shell functions the line number refers to the function as it appeared
              in the original definition, not necessarily as displayed by the functions builtin.

       LOGNAME
              If the corresponding variable is not set in the environment of  the  shell,  it  is
              initialized  to  the  login  name  corresponding to the current login session. This
              parameter is exported by default  but  this  can  be  disabled  using  the  typeset
              builtin.  The value is set to the string returned by the getlogin(3) system call if
              that is available.

       MACHTYPE
              The machine type (microprocessor class or machine model), as determined at  compile
              time.

       OLDPWD The  previous  working  directory.   This  is  set  when  the shell initializes and
              whenever the directory changes.

       OPTARG <S>
              The value of the last option argument processed by the getopts command.

       OPTIND <S>
              The index of the last option argument processed by the getopts command.

       OSTYPE The operating system, as determined at compile time.

       PPID <S>
              The process ID of the parent of the shell.  As for  $$,  the  value  indicates  the
              parent of the original shell and does not change in subshells.

       PWD    The present working directory.  This is set when the shell initializes and whenever
              the directory changes.

       RANDOM <S>
              A pseudo-random integer from 0 to 32767, newly generated each time  this  parameter
              is  referenced.   The  random number generator can be seeded by assigning a numeric
              value to RANDOM.

              The values of  RANDOM  form  an  intentionally-repeatable  pseudo-random  sequence;
              subshells  that  reference  RANDOM  will  result  in identical pseudo-random values
              unless the value of RANDOM is referenced or seeded in the parent shell  in  between
              subshell invocations.

       SECONDS <S>
              The  number  of  seconds  since  shell invocation.  If this parameter is assigned a
              value, then the value returned upon reference will be the value that  was  assigned
              plus the number of seconds since the assignment.

              Unlike  other  special parameters, the type of the SECONDS parameter can be changed
              using the typeset command.  Only integer and one of the floating  point  types  are
              allowed.   For  example,  `typeset -F SECONDS' causes the value to be reported as a
              floating point number.  The value is available to  microsecond  accuracy,  although
              the  shell  may show more or fewer digits depending on the use of typeset.  See the
              documentation for the builtin typeset in zshbuiltins(1) for more details.

       SHLVL <S>
              Incremented by one each time a new shell is started.

       signals
              An array containing the names of the signals.  Note  that  with  the  standard  zsh
              numbering  of  array  indices, where the first element has index 1, the signals are
              offset by 1 from the signal number used by the operating system.  For  example,  on
              typical  Unix-like  systems  HUP  is  signal  number  1,  but  is  referred  to  as
              $signals[2].  This is because of EXIT at position 1 in the  array,  which  is  used
              internally by zsh but is not known to the operating system.

       TRY_BLOCK_ERROR <S>
              In  an  always block, indicates whether the preceding list of code caused an error.
              The value is 1 to indicate an error, 0 otherwise.  It may be  reset,  clearing  the
              error condition.  See Complex Commands in zshmisc(1)

       TRY_BLOCK_INTERRUPT <S>
              This  variable works in a similar way to TRY_BLOCK_ERROR, but represents the status
              of an interrupt from the signal SIGINT, which typically  comes  from  the  keyboard
              when  the user types ^C.  If set to 0, any such interrupt will be reset; otherwise,
              the interrupt is propagated after the always block.

              Note that it is possible that an interrupt arrives  during  the  execution  of  the
              always block; this interrupt is also propagated.

       TTY    The name of the tty associated with the shell, if any.

       TTYIDLE <S>
              The  idle time of the tty associated with the shell in seconds or -1 if there is no
              such tty.

       UID <S>
              The real user ID of the shell process.  If you have sufficient privileges, you  may
              change  the  user  ID  of the shell by assigning to this parameter.  Also (assuming
              sufficient privileges), you may start a single command under a different user ID by
              `(UID=uid; command)'

              If  this  is  made  local, it is not implicitly set to 0, but may be explicitly set
              locally.

       USERNAME <S>
              The username corresponding to the real user ID of the shell process.  If  you  have
              sufficient  privileges, you may change the username (and also the user ID and group
              ID) of the shell  by  assigning  to  this  parameter.   Also  (assuming  sufficient
              privileges), you may start a single command under a different username (and user ID
              and group ID) by `(USERNAME=username; command)'

       VENDOR The vendor, as determined at compile time.

       zsh_eval_context <S> <Z> (ZSH_EVAL_CONTEXT <S>)
              An array (colon-separated list) indicating the context of shell code that is  being
              run.  Each time a piece of shell code that is stored within the shell is executed a
              string is temporarily appended to the array to indicate the type of operation  that
              is  being  performed.   Read in order the array gives an indication of the stack of
              operations being performed with the most immediate context last.

              Note that the variable does not give  information  on  syntactic  context  such  as
              pipelines or subshells.  Use $ZSH_SUBSHELL to detect subshells.

              The context is one of the following:
              cmdarg Code specified by the -c option to the command line that invoked the shell.

              cmdsubst
                     Command substitution using the `...` or $(...) construct.

              equalsubst
                     File substitution using the =(...) construct.

              eval   Code executed by the eval builtin.

              evalautofunc
                     Code  executed  with  the  KSH_AUTOLOAD  mechanism  in  order  to  define an
                     autoloaded function.

              fc     Code from the shell history executed by the -e option to the fc builtin.

              file   Lines of code being read directly from a file, for  example  by  the  source
                     builtin.

              filecode
                     Lines  of  code  being  read  from  a .zwc file instead of directly from the
                     source file.

              globqual
                     Code executed by the e or + glob qualifier.

              globsort
                     Code executed to order files by the o glob qualifier.

              insubst
                     File substitution using the <(...) construct.

              loadautofunc
                     Code read directly from a file to define an autoloaded function.

              outsubst
                     File substitution using the >(...) construct.

              sched  Code executed by the sched builtin.

              shfunc A shell function.

              stty   Code passed to stty by the STTY  environment  variable.   Normally  this  is
                     passed  directly  to the system's stty command, so this value is unlikely to
                     be seen in practice.

              style  Code executed as part of a style retrieved by the zstyle  builtin  from  the
                     zsh/zutil module.

              toplevel
                     The highest execution level of a script or interactive shell.

              trap   Code  executed  as  a  trap  defined  by the trap builtin.  Traps defined as
                     functions have the context shfunc.  As traps are asynchronous they may  have
                     a different hierarchy from other code.

              zpty   Code executed by the zpty builtin from the zsh/zpty module.

              zregexparse-guard
                     Code  executed  as  a  guard  by  the zregexparse command from the zsh/zutil
                     module.

              zregexparse-action
                     Code executed as an action by the zregexparse  command  from  the  zsh/zutil
                     module.

       ZSH_ARGZERO
              If  zsh was invoked to run a script, this is the name of the script.  Otherwise, it
              is the name used to invoke the current shell.  This is the same as the value of  $0
              when the POSIX_ARGZERO option is set, but is always available.

       ZSH_EXECUTION_STRING
              If  the  shell was started with the option -c, this contains the argument passed to
              the option.  Otherwise it is not set.

       ZSH_NAME
              Expands to the basename of the command used to invoke this instance of zsh.

       ZSH_PATCHLEVEL
              The output of `git describe --tags --long' for the zsh repository used to build the
              shell.   This is most useful in order to keep track of versions of the shell during
              development between releases; hence most users should not use it and should instead
              rely on $ZSH_VERSION.

       zsh_scheduled_events
              See the section `The zsh/sched Module' in zshmodules(1).

       ZSH_SCRIPT
              If zsh was invoked to run a script, this is the name of the script, otherwise it is
              unset.

       ZSH_SUBSHELL
              Readonly integer.  Initially zero, incremented each time the shell forks to  create
              a  subshell  for  executing code.  Hence `(print $ZSH_SUBSHELL)' and `print $(print
              $ZSH_SUBSHELL)' output 1, while `( (print $ZSH_SUBSHELL) )' outputs 2.

       ZSH_VERSION
              The version number of the release of zsh.

PARAMETERS USED BY THE SHELL

       The following parameters are used by the shell.  Again, `<S>' indicates that the parameter
       is  special  and  `<Z>'  indicates  that  the  parameter  does  not  exist  when the shell
       initializes in sh or ksh emulation mode.

       In cases where there are two parameters with an upper- and  lowercase  form  of  the  same
       name,  such  as  path and PATH, the lowercase form is an array and the uppercase form is a
       scalar with the elements of the array joined together by colons.   These  are  similar  to
       tied  parameters created via `typeset -T'.  The normal use for the colon-separated form is
       for exporting to the environment, while the array form is easier to manipulate within  the
       shell.   Note  that  unsetting  either of the pair will unset the other; they retain their
       special properties when recreated, and recreating one of the pair will recreate the other.

       ARGV0  If exported, its value is used as the argv[0] of external commands.   Usually  used
              in constructs like `ARGV0=emacs nethack'.

       BAUD   The  rate  in  bits per second at which data reaches the terminal.  The line editor
              will use this value in order to compensate for a slow terminal by delaying  updates
              to the display until necessary.  If the parameter is unset or the value is zero the
              compensation mechanism is turned off.  The parameter is not set by default.

              This parameter may be profitably set in some circumstances, e.g.  for  slow  modems
              dialing into a communications server, or on a slow wide area network.  It should be
              set to the baud rate of the slowest part of the link for best performance.

       cdpath <S> <Z> (CDPATH <S>)
              An array (colon-separated list) of directories specifying the search path  for  the
              cd command.

       COLUMNS <S>
              The  number  of  columns for this terminal session.  Used for printing select lists
              and for the line editor.

       CORRECT_IGNORE
              If set, is  treated  as  a  pattern  during  spelling  correction.   Any  potential
              correction  that matches the pattern is ignored.  For example, if the value is `_*'
              then completion functions (which, by convention, have  names  beginning  with  `_')
              will  never  be offered as spelling corrections.  The pattern does not apply to the
              correction of file names, as applied by the CORRECT_ALL option (so with the example
              just  given  files  beginning  with  `_'  in  the  current directory would still be
              completed).

       CORRECT_IGNORE_FILE
              If set, is treated as a pattern during spelling correction of file names.  Any file
              name  that  matches  the pattern is never offered as a correction.  For example, if
              the value  is  `.*'  then  dot  file  names  will  never  be  offered  as  spelling
              corrections.  This is useful with the CORRECT_ALL option.

       DIRSTACKSIZE
              The  maximum  size  of  the  directory stack, by default there is no limit.  If the
              stack gets larger than this, it will be truncated automatically.   This  is  useful
              with the AUTO_PUSHD option.

       ENV    If  the  ENV  environment variable is set when zsh is invoked as sh or ksh, $ENV is
              sourced after the profile scripts.  The value of  ENV  is  subjected  to  parameter
              expansion,  command substitution, and arithmetic expansion before being interpreted
              as a pathname.  Note that ENV is not used unless the shell is interactive  and  zsh
              is emulating sh or ksh.

       FCEDIT The  default editor for the fc builtin.  If FCEDIT is not set, the parameter EDITOR
              is used; if that is not set either, a builtin default, usually vi, is used.

       fignore <S> <Z> (FIGNORE <S>)
              An array (colon separated list) containing the suffixes  of  files  to  be  ignored
              during  filename  completion.   However,  if  completion  only generates files with
              suffixes in this list, then these files are completed anyway.

       fpath <S> <Z> (FPATH <S>)
              An array (colon separated list) of  directories  specifying  the  search  path  for
              function  definitions.  This path is searched when a function with the -u attribute
              is referenced.  If an executable file is found, then it is read and executed in the
              current environment.

       histchars <S>
              Three  characters  used by the shell's history and lexical analysis mechanism.  The
              first character signals the start of a history expansion (default `!').  The second
              character  signals  the  start  of a quick history substitution (default `^').  The
              third character is the comment character (default `#').

              The characters must be in the ASCII character set; any attempt to set histchars  to
              characters with a locale-dependent meaning will be rejected with an error message.

       HISTCHARS <S> <Z>
              Same as histchars.  (Deprecated.)

       HISTFILE
              The  file  to  save  the history in when an interactive shell exits.  If unset, the
              history is not saved.

       HISTORY_IGNORE
              If set, is treated as a pattern  at  the  time  history  files  are  written.   Any
              potential  history  entry that matches the pattern is skipped.  For example, if the
              value is `fc *' then commands that invoke the interactive history editor are  never
              written to the history file.

              Note  that HISTORY_IGNORE defines a single pattern: to specify alternatives use the
              `(first|second|...)' syntax.

              Compare the HIST_NO_STORE option or the zshaddhistory hook, either of  which  would
              prevent  such  commands from being added to the interactive history at all.  If you
              wish to use HISTORY_IGNORE to stop history being added in the first place, you  can
              define the following hook:

                     zshaddhistory() {
                       emulate -L zsh
                       ## uncomment if HISTORY_IGNORE
                       ## should use EXTENDED_GLOB syntax
                       # setopt extendedglob
                       [[ $1 != ${~HISTORY_IGNORE} ]]
                     }

       HISTSIZE <S>
              The  maximum  number of events stored in the internal history list.  If you use the
              HIST_EXPIRE_DUPS_FIRST option, setting this value larger  than  the  SAVEHIST  size
              will give you the difference as a cushion for saving duplicated history events.

              If  this  is  made  local, it is not implicitly set to 0, but may be explicitly set
              locally.

       HOME <S>
              The default argument for the cd command.  This is  not  set  automatically  by  the
              shell  in  sh, ksh or csh emulation, but it is typically present in the environment
              anyway, and if it becomes set it has its usual special behaviour.

       IFS <S>
              Internal field separators (by default space, tab, newline and NUL), that  are  used
              to  separate  words which result from command or parameter expansion and words read
              by the read builtin.  Any characters from the  set  space,  tab  and  newline  that
              appear  in  the  IFS  are  called  IFS  white  space.   One or more IFS white space
              characters or one non-IFS white space character  together  with  any  adjacent  IFS
              white  space  character  delimit  a field.  If an IFS white space character appears
              twice consecutively in the IFS, this character is treated as if it were not an  IFS
              white space character.

              If  the  parameter is unset, the default is used.  Note this has a different effect
              from setting the parameter to an empty string.

       KEYBOARD_HACK
              This variable defines a character to be removed from the end of  the  command  line
              before interpreting it (interactive shells only). It is intended to fix the problem
              with keys placed annoyingly close to return and replaces the SUNKEYBOARDHACK option
              which  did  this  for  backquotes  only.   Should  the  chosen  character be one of
              singlequote, doublequote or backquote, there must also be an odd number of them  on
              the command line for the last one to be removed.

              For  backward  compatibility,  if the SUNKEYBOARDHACK option is explicitly set, the
              value of KEYBOARD_HACK reverts to backquote.  If the option  is  explicitly  unset,
              this variable is set to empty.

       KEYTIMEOUT
              The  time  the shell waits, in hundredths of seconds, for another key to be pressed
              when reading bound multi-character sequences.

       LANG <S>
              This variable determines the locale category  for  any  category  not  specifically
              selected via a variable starting with `LC_'.

       LC_ALL <S>
              This  variable  overrides  the value of the `LANG' variable and the value of any of
              the other variables starting with `LC_'.

       LC_COLLATE <S>
              This variable determines the locale category for  character  collation  information
              within ranges in glob brackets and for sorting.

       LC_CTYPE <S>
              This  variable determines the locale category for character handling functions.  If
              the MULTIBYTE option is in effect this variable or LANG should contain a value that
              reflects  the  character  set  in  use,  even if it is a single-byte character set,
              unless only the 7-bit subset (ASCII) is used.  For example, if the character set is
              ISO-8859-1,  a suitable value might be en_US.iso88591 (certain Linux distributions)
              or en_US.ISO8859-1 (MacOS).

       LC_MESSAGES <S>
              This variable determines the language in which messages should  be  written.   Note
              that zsh does not use message catalogs.

       LC_NUMERIC <S>
              This variable affects the decimal point character and thousands separator character
              for the formatted input/output functions and  string  conversion  functions.   Note
              that zsh ignores this setting when parsing floating point mathematical expressions.

       LC_TIME <S>
              This variable determines the locale category for date and time formatting in prompt
              escape sequences.

       LINES <S>
              The number of lines for this terminal session.  Used for printing select lists  and
              for the line editor.

       LISTMAX
              In  the  line  editor,  the  number of matches to list without asking first. If the
              value is negative, the list will be shown if it spans at  most  as  many  lines  as
              given by the absolute value.  If set to zero, the shell asks only if the top of the
              listing would scroll off the screen.

       LOGCHECK
              The interval in seconds between checks for login/logout activity  using  the  watch
              parameter.

       MAIL   If  this  parameter is set and mailpath is not set, the shell looks for mail in the
              specified file.

       MAILCHECK
              The interval in seconds between checks for new mail.

       mailpath <S> <Z> (MAILPATH <S>)
              An array (colon-separated list) of filenames to check for new mail.  Each  filename
              can  be  followed  by  a  `?' and a message that will be printed.  The message will
              undergo parameter expansion, command substitution and arithmetic expansion with the
              variable  $_ defined as the name of the file that has changed.  The default message
              is `You have new mail'.  If an element is a directory instead of a file  the  shell
              will recursively check every file in every subdirectory of the element.

       manpath <S> <Z> (MANPATH <S> <Z>)
              An  array (colon-separated list) whose value is not used by the shell.  The manpath
              array can be useful, however, since setting it also sets MANPATH, and vice versa.

       match
       mbegin
       mend   Arrays set by the shell when the b globbing flag is used in pattern  matches.   See
              the  subsection  Globbing  flags  in  the  documentation for Filename Generation in
              zshexpn(1).

       MATCH
       MBEGIN
       MEND   Set by the shell when the m globbing flag is used  in  pattern  matches.   See  the
              subsection   Globbing  flags  in  the  documentation  for  Filename  Generation  in
              zshexpn(1).

       module_path <S> <Z> (MODULE_PATH <S>)
              An  array  (colon-separated  list)  of  directories  that  zmodload  searches   for
              dynamically  loadable modules.  This is initialized to a standard pathname, usually
              `/usr/local/lib/zsh/$ZSH_VERSION'.   (The   `/usr/local/lib'   part   varies   from
              installation  to  installation.)   For  security  reasons,  any  value  set  in the
              environment when the shell is started will be ignored.

              These parameters only exist if the installation supports dynamic module loading.

       NULLCMD <S>
              The command name to assume if a redirection is specified with no command.  Defaults
              to  cat.  For sh/ksh behavior, change this to :.  For csh-like behavior, unset this
              parameter; the shell will print an error message if null commands are entered.

       path <S> <Z> (PATH <S>)
              An array (colon-separated list) of directories to search for commands.   When  this
              parameter  is  set, each directory is scanned and all files found are put in a hash
              table.

       POSTEDIT <S>
              This string is output whenever the line editor exits.  It usually contains  termcap
              strings to reset the terminal.

       PROMPT <S> <Z>
       PROMPT2 <S> <Z>
       PROMPT3 <S> <Z>
       PROMPT4 <S> <Z>
              Same as PS1, PS2, PS3 and PS4, respectively.

       prompt <S> <Z>
              Same as PS1.

       PROMPT_EOL_MARK
              When the PROMPT_CR and PROMPT_SP options are set, the PROMPT_EOL_MARK parameter can
              be used to customize how the end  of  partial  lines  are  shown.   This  parameter
              undergoes  prompt  expansion,  with the PROMPT_PERCENT option set.  If not set, the
              default behavior is equivalent to the value `%B%S%#%s%b'.

       PS1 <S>
              The primary prompt string, printed before  a  command  is  read.   It  undergoes  a
              special form of expansion before being displayed; see EXPANSION OF PROMPT SEQUENCES
              in zshmisc(1).  The default is `%m%# '.

       PS2 <S>
              The secondary prompt, printed when the shell needs more information to  complete  a
              command.   It  is  expanded  in  the same way as PS1.  The default is `%_> ', which
              displays any  shell  constructs  or  quotation  marks  which  are  currently  being
              processed.

       PS3 <S>
              Selection prompt used within a select loop.  It is expanded in the same way as PS1.
              The default is `?# '.

       PS4 <S>
              The execution trace prompt.  Default is `+%N:%i> ', which displays the name of  the
              current shell structure and the line number within it.  In sh or ksh emulation, the
              default is `+ '.

       psvar <S> <Z> (PSVAR <S>)
              An array (colon-separated list) whose elements  can  be  used  in  PROMPT  strings.
              Setting psvar also sets PSVAR, and vice versa.

       READNULLCMD <S>
              The  command  name  to  assume  if  a single input redirection is specified with no
              command.  Defaults to more.

       REPORTMEMORY
              If nonnegative, commands whose maximum resident set size  (roughly  speaking,  main
              memory  usage)  in  kilobytes  is  greater  than  this value have timing statistics
              reported.  The format used to  output  statistics  is  the  value  of  the  TIMEFMT
              parameter,  which  is the same as for the REPORTTIME variable and the time builtin;
              note that by default this does not output memory usage.  Appending " max RSS %M" to
              the  value  of TIMEFMT causes it to output the value that triggered the report.  If
              REPORTTIME is also in use, at most a single report is printed  for  both  triggers.
              This  feature  requires  the  getrusage() system call, commonly supported by modern
              Unix-like systems.

       REPORTTIME
              If nonnegative, commands whose combined user and system execution  times  (measured
              in  seconds)  are  greater than this value have timing statistics printed for them.
              Output is suppressed for  commands  executed  within  the  line  editor,  including
              completion;  commands  explicitly  marked  with  the  time  keyword still cause the
              summary to be printed in this case.

       REPLY  This parameter is reserved by  convention  to  pass  string  values  between  shell
              scripts  and  shell builtins in situations where a function call or redirection are
              impossible or undesirable.  The read builtin and the select complex command may set
              REPLY,  and  filename  generation  both sets and examines its value when evaluating
              certain expressions.  Some modules also employ REPLY for similar purposes.

       reply  As REPLY, but for array values rather than strings.

       RPROMPT <S>
       RPS1 <S>
              This prompt is displayed on the right-hand side of  the  screen  when  the  primary
              prompt  is  being displayed on the left.  This does not work if the SINGLE_LINE_ZLE
              option is set.  It is expanded in the same way as PS1.

       RPROMPT2 <S>
       RPS2 <S>
              This prompt is displayed on the right-hand side of the screen  when  the  secondary
              prompt  is  being displayed on the left.  This does not work if the SINGLE_LINE_ZLE
              option is set.  It is expanded in the same way as PS2.

       SAVEHIST
              The maximum number of history events to save in the history file.

              If this is made local, it is not implicitly set to 0, but  may  be  explicitly  set
              locally.

       SPROMPT <S>
              The  prompt  used for spelling correction.  The sequence `%R' expands to the string
              which presumably needs spelling  correction,  and  `%r'  expands  to  the  proposed
              correction.  All other prompt escapes are also allowed.

              The actions available at the prompt are [nyae]:
              n (`no') (default)
                     Discard the correction and run the command.
              y (`yes')
                     Make the correction and run the command.
              a (`abort')
                     Discard the entire command line without running it.
              e (`edit')
                     Resume editing the command line.

       STTY   If  this  parameter  is  set  in  a  command's environment, the shell runs the stty
              command with the value of this parameter as  arguments  in  order  to  set  up  the
              terminal before executing the command. The modes apply only to the command, and are
              reset when it finishes or is suspended. If the command is suspended  and  continued
              later  with  the fg or wait builtins it will see the modes specified by STTY, as if
              it were not suspended.  This (intentionally) does  not  apply  if  the  command  is
              continued  via  `kill  -CONT'.   STTY  is  ignored  if  the  command  is run in the
              background, or if it is in the environment of the shell but not explicitly assigned
              to  in  the  input  line.  This  avoids  running  stty at every external command by
              accidentally exporting it. Also note that STTY should not be used for  window  size
              specifications; these will not be local to the command.

       TERM <S>
              The  type  of terminal in use.  This is used when looking up termcap sequences.  An
              assignment to TERM causes zsh to re-initialize the terminal, even if the value does
              not  change  (e.g., `TERM=$TERM').  It is necessary to make such an assignment upon
              any change to the terminal definition database or terminal type in  order  for  the
              new settings to take effect.

       TERMINFO <S>
              A  reference  to  your  terminfo  database, used by the `terminfo' library when the
              system has it; see terminfo(5).  If set, this causes the shell to reinitialise  the
              terminal, making the workaround `TERM=$TERM' unnecessary.

       TERMINFO_DIRS <S>
              A  colon-seprarated list of terminfo databases, used by the `terminfo' library when
              the system has it; see terminfo(5). This variable is only used by certain  terminal
              libraries,  in particular ncurses; see terminfo(5) to check support on your system.
              If set, this causes the shell to reinitialise the terminal, making  the  workaround
              `TERM=$TERM'  unnecessary.   Note  that unlike other colon-separated arrays this is
              not tied to a zsh array.

       TIMEFMT
              The format of process time reports with the time keyword.  The default is  `%J   %U
              user  %S  system  %P  cpu  %*E  total'.  Recognizes the following escape sequences,
              although not all may be available on all systems, and some that are  available  may
              not be useful:

              %%     A `%'.
              %U     CPU seconds spent in user mode.
              %S     CPU seconds spent in kernel mode.
              %E     Elapsed time in seconds.
              %P     The CPU percentage, computed as 100*(%U+%S)/%E.
              %W     Number of times the process was swapped.
              %X     The average amount in (shared) text space used in kilobytes.
              %D     The average amount in (unshared) data/stack space used in kilobytes.
              %K     The total space used (%X+%D) in kilobytes.
              %M     The  maximum memory the process had in use at any time in kilobytes.
              %F     The number of major page faults (page needed to be brought from disk).
              %R     The number of minor page faults.
              %I     The number of input operations.
              %O     The number of output operations.
              %r     The number of socket messages received.
              %s     The number of socket messages sent.
              %k     The number of signals received.
              %w     Number of voluntary context switches (waits).
              %c     Number of involuntary context switches.
              %J     The name of this job.

              A  star  may  be  inserted  between the percent sign and flags printing time (e.g.,
              `%*E'); this causes the time to be printed  in  `hh:mm:ss.ttt'  format  (hours  and
              minutes  are  only printed if they are not zero).  Alternatively, `m' or `u' may be
              used (e.g.,  `%mE')  to  produce  time  output  in  milliseconds  or  microseconds,
              respectively.

       TMOUT  If this parameter is nonzero, the shell will receive an ALRM signal if a command is
              not entered within the specified number of seconds after issuing a prompt. If there
              is  a  trap  on SIGALRM, it will be executed and a new alarm is scheduled using the
              value of the TMOUT parameter after executing the trap.  If no trap is set, and  the
              idle  time  of  the terminal is not less than the value of the TMOUT parameter, zsh
              terminates.  Otherwise a new alarm is scheduled to TMOUT  seconds  after  the  last
              keypress.

       TMPPREFIX
              A pathname prefix which the shell will use for all temporary files.  Note that this
              should include an initial part for the file name as well as  any  directory  names.
              The default is `/tmp/zsh'.

       TMPSUFFIX
              A  filename  suffix which the shell will use for temporary files created by process
              substitutions (e.g., `=(list)').  Note that the value should include a leading  dot
              `.'  if  intended  to  be  interpreted  as a file extension.  The default is not to
              append any suffix, thus this parameter should be assigned only when needed and then
              unset again.

       watch <S> <Z> (WATCH <S>)
              An array (colon-separated list) of login/logout events to report.

              If  it  contains  the single word `all', then all login/logout events are reported.
              If it contains the single word `notme', then all events are reported as with  `all'
              except $USERNAME.

              An  entry  in  this  list  may  consist  of a username, an `@' followed by a remote
              hostname, and a `%' followed by a line (tty).  Any of these may be  a  pattern  (be
              sure  to  quote this during the assignment to watch so that it does not immediately
              perform file generation); the setting of the  EXTENDED_GLOB  option  is  respected.
              Any  or all of these components may be present in an entry; if a login/logout event
              matches all of them, it is reported.

              For example, with the EXTENDED_GLOB option set, the following:

                     watch=('^(pws|barts)')

              causes reports for activity associated with any user other than pws or barts.

       WATCHFMT
              The format of login/logout reports if the watch parameter is set.  Default  is  `%n
              has %a %l from %m'.  Recognizes the following escape sequences:

              %n     The name of the user that logged in/out.

              %a     The observed action, i.e. "logged on" or "logged off".

              %l     The line (tty) the user is logged in on.

              %M     The full hostname of the remote host.

              %m     The  hostname  up  to the first `.'.  If only the IP address is available or
                     the utmp field contains the name of an X-windows display, the whole name  is
                     printed.

                     NOTE: The `%m' and `%M' escapes will work only if there is a host name field
                     in the utmp on  your  machine.   Otherwise  they  are  treated  as  ordinary
                     strings.

              %S (%s)
                     Start (stop) standout mode.

              %U (%u)
                     Start (stop) underline mode.

              %B (%b)
                     Start (stop) boldface mode.

              %t
              %@     The time, in 12-hour, am/pm format.

              %T     The time, in 24-hour format.

              %w     The date in `day-dd' format.

              %W     The date in `mm/dd/yy' format.

              %D     The date in `yy-mm-dd' format.

              %D{string}
                     The  date  formatted  as  string  using  the  strftime  function,  with  zsh
                     extensions as described by EXPANSION OF PROMPT SEQUENCES in zshmisc(1).

              %(x:true-text:false-text)
                     Specifies a ternary expression.  The character following the x is arbitrary;
                     the  same  character is used to separate the text for the "true" result from
                     that for the "false" result.  Both the separator and the  right  parenthesis
                     may be escaped with a backslash.  Ternary expressions may be nested.

                     The  test character x may be any one of `l', `n', `m' or `M', which indicate
                     a `true'  result  if  the  corresponding  escape  sequence  would  return  a
                     non-empty  value;  or  it may be `a', which indicates a `true' result if the
                     watched user has logged  in,  or  `false'  if  he  has  logged  out.   Other
                     characters  evaluate  to  neither  true  nor false; the entire expression is
                     omitted in this case.

                     If the result is `true', then the true-text is formatted  according  to  the
                     rules  above  and  printed,  and the false-text is skipped.  If `false', the
                     true-text is skipped and the false-text is formatted and printed.  Either or
                     both  of  the  branches may be empty, but both separators must be present in
                     any case.

       WORDCHARS <S>
              A list of non-alphanumeric characters considered part of a word by the line editor.

       ZBEEP  If set, this gives a string of characters, which can use all the same codes as  the
              bindkey  command  as  described  in the zsh/zle module entry in zshmodules(1), that
              will be output to the terminal instead of beeping.  This may have a visible instead
              of  an  audible  effect; for example, the string `\e[?5h\e[?5l' on a vt100 or xterm
              will have the effect of flashing reverse video on  and  off  (if  you  usually  use
              reverse  video,  you  should  use  the  string `\e[?5l\e[?5h' instead).  This takes
              precedence over the NOBEEP option.

       ZDOTDIR
              The directory to search for shell startup files (.zshrc, etc), if not $HOME.

       zle_bracketed_paste
              Many terminal emulators have a feature that allows applications  to  identify  when
              text  is  pasted  into the terminal rather than being typed normally. For ZLE, this
              means that special characters such as tabs and newlines can be inserted instead  of
              invoking  editor  commands.  Furthermore, pasted text forms a single undo event and
              if the region is active, pasted text will replace the region.

              This two-element array contains the terminal  escape  sequences  for  enabling  and
              disabling  the  feature.  These escape sequences are used to enable bracketed paste
              when ZLE is active and disable it at other times.  Unsetting the parameter has  the
              effect of ensuring that bracketed paste remains disabled.

       zle_highlight
              An  array  describing  contexts  in which ZLE should highlight the input text.  See
              Character Highlighting in zshzle(1).

       ZLE_LINE_ABORTED
              This parameter is set by the line editor when an error  occurs.   It  contains  the
              line   that   was  being  edited  at  the  point  of  the  error.   `print  -zr  --
              $ZLE_LINE_ABORTED' can be used to recover the line.  Only the most recent  line  of
              this kind is remembered.

       ZLE_REMOVE_SUFFIX_CHARS
       ZLE_SPACE_SUFFIX_CHARS
              These  parameters  are  used by the line editor.  In certain circumstances suffixes
              (typically space  or  slash)  added  by  the  completion  system  will  be  removed
              automatically,  either  because  the  next  editing  command  was not an insertable
              character, or because the character was  marked  as  requiring  the  suffix  to  be
              removed.

              These variables can contain the sets of characters that will cause the suffix to be
              removed.  If ZLE_REMOVE_SUFFIX_CHARS is set, those characters will cause the suffix
              to  be  removed;  if ZLE_SPACE_SUFFIX_CHARS is set, those characters will cause the
              suffix to be removed and replaced by a space.

              If ZLE_REMOVE_SUFFIX_CHARS is not set, the default behaviour is equivalent to:

                     ZLE_REMOVE_SUFFIX_CHARS=$' \t\n;&|'

              If ZLE_REMOVE_SUFFIX_CHARS is set but is empty, no characters have this  behaviour.
              ZLE_SPACE_SUFFIX_CHARS takes precedence, so that the following:

                     ZLE_SPACE_SUFFIX_CHARS=$'&|'

              causes  the  characters  `&'  and `|' to remove the suffix but to replace it with a
              space.

              To illustrate the difference, suppose  that  the  option  AUTO_REMOVE_SLASH  is  in
              effect and the directory DIR has just been completed, with an appended /, following
              which   the   user   types   `&'.    The   default   result   is   `DIR&'.     With
              ZLE_REMOVE_SUFFIX_CHARS  set but without including `&' the result is `DIR/&'.  With
              ZLE_SPACE_SUFFIX_CHARS set to include `&' the result is `DIR &'.

              Note that certain completions may provide their own suffix removal  or  replacement
              behaviour  which  overrides  the  values described here.  See the completion system
              documentation in zshcompsys(1).

       ZLE_RPROMPT_INDENT <S>
              If set, used to give the indentation between the  right  hand  side  of  the  right
              prompt  in  the  line editor as given by RPS1 or RPROMPT and the right hand side of
              the screen.  If not set, the value 1 is used.

              Typically this will be used to set the value to 0 so that the prompt appears  flush
              with  the right hand side of the screen.  This is not the default as many terminals
              do not handle this correctly, in particular when the prompt appears at the  extreme
              bottom  right  of  the  screen.  Recent virtual terminals are more likely to handle
              this case correctly.  Some experimentation is necessary.