Provided by: manpages-dev_5.05-1_all bug

NAME

       send, sendto, sendmsg - send a message on a socket

SYNOPSIS

       #include <sys/types.h>
       #include <sys/socket.h>

       ssize_t send(int sockfd, const void *buf, size_t len, int flags);

       ssize_t sendto(int sockfd, const void *buf, size_t len, int flags,
                      const struct sockaddr *dest_addr, socklen_t addrlen);

       ssize_t sendmsg(int sockfd, const struct msghdr *msg, int flags);

DESCRIPTION

       The system calls send(), sendto(), and sendmsg() are used to transmit a message to another
       socket.

       The send() call may be used only when the socket is in a  connected  state  (so  that  the
       intended  recipient  is  known).   The  only difference between send() and write(2) is the
       presence of flags.  With a zero flags argument, send() is equivalent to  write(2).   Also,
       the following call

           send(sockfd, buf, len, flags);

       is equivalent to

           sendto(sockfd, buf, len, flags, NULL, 0);

       The argument sockfd is the file descriptor of the sending socket.

       If  sendto()  is  used  on  a  connection-mode  (SOCK_STREAM,  SOCK_SEQPACKET) socket, the
       arguments dest_addr and addrlen are ignored (and the error EISCONN may  be  returned  when
       they  are  not  NULL  and  0),  and the error ENOTCONN is returned when the socket was not
       actually connected.  Otherwise, the address of the  target  is  given  by  dest_addr  with
       addrlen  specifying  its  size.   For  sendmsg(),  the  address  of the target is given by
       msg.msg_name, with msg.msg_namelen specifying its size.

       For send() and sendto(), the message is found in buf and has length len.   For  sendmsg(),
       the  message  is  pointed to by the elements of the array msg.msg_iov.  The sendmsg() call
       also allows sending ancillary data (also known as control information).

       If the message is too long to pass atomically through the underlying protocol,  the  error
       EMSGSIZE is returned, and the message is not transmitted.

       No  indication of failure to deliver is implicit in a send().  Locally detected errors are
       indicated by a return value of -1.

       When the message does not fit into the send buffer of the socket, send() normally  blocks,
       unless  the  socket has been placed in nonblocking I/O mode.  In nonblocking mode it would
       fail with the error EAGAIN or EWOULDBLOCK in this case.  The select(2) call may be used to
       determine when it is possible to send more data.

   The flags argument
       The flags argument is the bitwise OR of zero or more of the following flags.

       MSG_CONFIRM (since Linux 2.3.15)
              Tell the link layer that forward progress happened: you got a successful reply from
              the other side.  If the link layer doesn't get this it will regularly  reprobe  the
              neighbor  (e.g., via a unicast ARP).  Valid only on SOCK_DGRAM and SOCK_RAW sockets
              and currently implemented only for IPv4 and IPv6.  See arp(7) for details.

       MSG_DONTROUTE
              Don't use a gateway to send  out  the  packet,  send  to  hosts  only  on  directly
              connected  networks.   This is usually used only by diagnostic or routing programs.
              This is defined only for protocol families that route; packet sockets don't.

       MSG_DONTWAIT (since Linux 2.2)
              Enables nonblocking operation; if the operation would block, EAGAIN or  EWOULDBLOCK
              is  returned.   This  provides similar behavior to setting the O_NONBLOCK flag (via
              the fcntl(2) F_SETFL operation), but differs in that  MSG_DONTWAIT  is  a  per-call
              option, whereas O_NONBLOCK is a setting on the open file description (see open(2)),
              which will affect all threads in the calling process and as well as other processes
              that hold file descriptors referring to the same open file description.

       MSG_EOR (since Linux 2.2)
              Terminates  a  record  (when  this  notion  is  supported,  as  for sockets of type
              SOCK_SEQPACKET).

       MSG_MORE (since Linux 2.4.4)
              The caller has more data to send.  This flag is used with TCP sockets to obtain the
              same  effect  as  the TCP_CORK socket option (see tcp(7)), with the difference that
              this flag can be set on a per-call basis.

              Since Linux 2.6, this flag is also supported  for  UDP  sockets,  and  informs  the
              kernel  to  package  all of the data sent in calls with this flag set into a single
              datagram which is transmitted only when a call is performed that does  not  specify
              this flag.  (See also the UDP_CORK socket option described in udp(7).)

       MSG_NOSIGNAL (since Linux 2.2)
              Don't  generate a SIGPIPE signal if the peer on a stream-oriented socket has closed
              the connection.  The EPIPE error is still returned.  This provides similar behavior
              to  using  sigaction(2)  to ignore SIGPIPE, but, whereas MSG_NOSIGNAL is a per-call
              feature, ignoring SIGPIPE sets a process attribute that affects all threads in  the
              process.

       MSG_OOB
              Sends  out-of-band  data  on  sockets  that  support  this  notion  (e.g.,  of type
              SOCK_STREAM); the underlying protocol must also support out-of-band data.

   sendmsg()
       The definition of the msghdr structure employed by sendmsg() is as follows:

           struct msghdr {
               void         *msg_name;       /* Optional address */
               socklen_t     msg_namelen;    /* Size of address */
               struct iovec *msg_iov;        /* Scatter/gather array */
               size_t        msg_iovlen;     /* # elements in msg_iov */
               void         *msg_control;    /* Ancillary data, see below */
               size_t        msg_controllen; /* Ancillary data buffer len */
               int           msg_flags;      /* Flags (unused) */
           };

       The msg_name field is used on an unconnected socket to specify the target  address  for  a
       datagram.   It  points to a buffer containing the address; the msg_namelen field should be
       set to the size of the address.  For a connected socket, these fields should be  specified
       as NULL and 0, respectively.

       The msg_iov and msg_iovlen fields specify scatter-gather locations, as for writev(2).

       You  may  send  control information using the msg_control and msg_controllen members.  The
       maximum control buffer length the kernel can process is limited per socket by the value in
       /proc/sys/net/core/optmem_max; see socket(7).

       The msg_flags field is ignored.

RETURN VALUE

       On  success,  these  calls return the number of bytes sent.  On error, -1 is returned, and
       errno is set appropriately.

ERRORS

       These are some standard errors generated by the socket layer.  Additional  errors  may  be
       generated  and  returned from the underlying protocol modules; see their respective manual
       pages.

       EACCES (For UNIX domain sockets, which are identified by  pathname)  Write  permission  is
              denied  on  the  destination socket file, or search permission is denied for one of
              the directories the path prefix.  (See path_resolution(7).)

              (For UDP sockets) An attempt was made to send to  a  network/broadcast  address  as
              though it was a unicast address.

       EAGAIN or EWOULDBLOCK
              The  socket  is  marked  nonblocking  and  the  requested  operation  would  block.
              POSIX.1-2001 allows either error to be returned for this case, and does not require
              these  constants to have the same value, so a portable application should check for
              both possibilities.

       EAGAIN (Internet domain datagram sockets)  The  socket  referred  to  by  sockfd  had  not
              previously been bound to an address and, upon attempting to bind it to an ephemeral
              port, it was determined that all port numbers  in  the  ephemeral  port  range  are
              currently  in use.  See the discussion of /proc/sys/net/ipv4/ip_local_port_range in
              ip(7).

       EALREADY
              Another Fast Open is in progress.

       EBADF  sockfd is not a valid open file descriptor.

       ECONNRESET
              Connection reset by peer.

       EDESTADDRREQ
              The socket is not connection-mode, and no peer address is set.

       EFAULT An invalid user space address was specified for an argument.

       EINTR  A signal occurred before any data was transmitted; see signal(7).

       EINVAL Invalid argument passed.

       EISCONN
              The connection-mode socket was connected already but  a  recipient  was  specified.
              (Now either this error is returned, or the recipient specification is ignored.)

       EMSGSIZE
              The  socket  type  requires  that  message  be sent atomically, and the size of the
              message to be sent made this impossible.

       ENOBUFS
              The output queue for a network interface was full.  This generally  indicates  that
              the  interface  has  stopped  sending,  but  may be caused by transient congestion.
              (Normally, this does not occur in Linux.  Packets are just silently dropped when  a
              device queue overflows.)

       ENOMEM No memory available.

       ENOTCONN
              The socket is not connected, and no target has been given.

       ENOTSOCK
              The file descriptor sockfd does not refer to a socket.

       EOPNOTSUPP
              Some bit in the flags argument is inappropriate for the socket type.

       EPIPE  The  local  end  has been shut down on a connection oriented socket.  In this case,
              the process will also receive a SIGPIPE unless MSG_NOSIGNAL is set.

CONFORMING TO

       4.4BSD, SVr4, POSIX.1-2001.  These interfaces first appeared in 4.2BSD.

       POSIX.1-2001  describes  only  the  MSG_OOB  and  MSG_EOR  flags.   POSIX.1-2008  adds   a
       specification of MSG_NOSIGNAL.  The MSG_CONFIRM flag is a Linux extension.

NOTES

       According  to  POSIX.1-2001,  the  msg_controllen  field of the msghdr structure should be
       typed as socklen_t, but glibc currently types it as size_t.

       See sendmmsg(2) for information about a Linux-specific system call that  can  be  used  to
       transmit multiple datagrams in a single call.

BUGS

       Linux may return EPIPE instead of ENOTCONN.

EXAMPLE

       An example of the use of sendto() is shown in getaddrinfo(3).

SEE ALSO

       fcntl(2),   getsockopt(2),  recv(2),  select(2),  sendfile(2),  sendmmsg(2),  shutdown(2),
       socket(2), write(2), cmsg(3), ip(7), ipv6(7), socket(7), tcp(7), udp(7), unix(7)

COLOPHON

       This page is part of release 5.05 of the Linux man-pages project.  A  description  of  the
       project,  information  about  reporting  bugs, and the latest version of this page, can be
       found at https://www.kernel.org/doc/man-pages/.