Provided by: cpuset_1.6-3.1_all bug

NAME

       cset-shield - cpuset supercommand which implements cpu shielding

SYNOPSIS

       cset [cset options] shield [shield options] [args]
       cset shield --help
       cset shield
       cset shield --cpu 1-7
       cset shield --cpu 1-7 --kthread=on
       cset shield --exec /opt/software/myapp/doit --my_opt1 --my_opt2
       cset shield --user appuser --exec run_benchmark.sh
       cset shield --shield --pid 1024,2048,5000-1000
       cset shield --unshield --pid 6000-8500
       cset shield --kthread=off
       cset shield --kthread=on
       cset shield --shield bash

OPTIONS

       -h, --help
           prints the list of options for this command

       -c CPUSPEC, --cpu=CPUSPEC
           modifies or initializes the shield cpusets

       -r, --reset
           destroys the shield

       -e, --exec
           executes args in the shield

       --user=USER
           use this USER for --exec (id or name)

       --group=GROUP
           use this GROUP for --exec (id or name)

       -s, --shield
           shield PIDSPEC specified with -p/--pid of processes or threads

       -u, --unshield
           remove PIDSPEC specified with -p/--pid of processes or threads from the shield, the
           tasks keep running in the unshielded cpuset

       --threads
           if specified, any processes found in the PIDSPEC to have multiple threads will
           automatically have all their threads added to the PIDSPEC (use to shield or unshield
           all related threads)

       -k on|off, --kthread=on|off
           shield from unbound interrupt threads as well

       -f, --force
           force operation, use with care

       -v, --verbose
           prints more detailed output, additive

       --sysset=SYSSET
           optionally specify system cpuset name

       --userset=USERSET
           optionally specify user cpuset name

DESCRIPTION

       This is a supercommand that creates basic cpu shielding. The normal cset commands can of
       course be used to create this basic shield, but the shield command combines many such
       commands to create and manage a common type of cpu shielding setup.

       The concept of shielding implies at minimum three cpusets, for example: root, user and
       system. The root cpuset always exists in all implementations of cpusets and contains all
       available CPUs on the machine. The system cpuset is so named because normal system tasks
       are made to run on it. The user cpuset is so named because that is the "shielded" cpuset
       on which you would run your tasks of interest.

       Usually, CPU zero would be in the system set and the rest of the CPUs would be in the user
       set. After creation of the cpusets, all processes running in the root cpuset are moved to
       the system cpuset. Thus any new processes or threads spawned from these processes will
       also run the system cpuset.

       If the optional --kthread=on option is given to the shield command, then all kernel
       threads (with exception of the per-CPU bound interrupt kernel threads) are also moved to
       the system set.

       One executes processes on the shielded user cpuset with the --exec subcommand or moves
       processes or threads to the shielded cpuset with the --shield subcommand with a --pid
       option.

           Note
           You do not need to specify which cpuset a process or thread is running in initially
           when using the --shield subcommand.
       To create a shield, you would execute the shield command with the --cpu option that
       specifies CPUSPEC argument that assigns CPUs to be under the shield (this means assigned
       to the user cpuset, all other cpus will be assigned to the system set).

       For example:

       # cset shield --cpu=1-3

       On a 4-way machine, this command will dedicate the first processor, CPU0, for the system
       set (unshielded) and the last three processors, CPU1, CPU2, CPU3, for the user set
       (shielded).

       The CPUSPEC will accept a comma separated list of CPUs and inclusive range specifications.
       For example, --cpu=1,3,5-7 will assign CPU1, CPU3, CPU5, CPU6, and CPU7 to the user (or
       shielded) cpuset and the inverse of that to the system (or unshielded) cpuset.

       If you do not like the names "system" and "user" for the unshielded and shielded sets
       respectively, or if those names are used already, then use the --sysset and --userset
       options.

       For example:

       # cset shield --sysset=free --userset=cage --cpu=2,3 --kthread=on

       The above command will use the name "free" for the unshielded system cpuset, the name
       "cage" for the shielded user cpuset, initialize these cpusets and dedicate CPU0 and CPU1
       to the "free" set and (on a 4-way machine) dedicate CPU2 and CPU3 to the "cage" set.
       Further, the command moves all processes and threads, including kernel threads from the
       root cpuset to the "free" cpuset.

           Note
           If you do use the --syset/--userset options, then you must continue to use those for
           every invocation of the shield supercommand.
       After initialization, you can run the process of interest on the shielded cpuset with the
       --exec subcommand, or move processes or threads already running to the shielded cpuset
       with the --shield subcommand and the --pid option.

       Note that if your execed command takes options, then use the traditional "--" marker to
       separate cset’s options from your command’s options.

       For example:

       # cset shield --exec  ls -l

       This command will execute "ls -l" inside the shield.

       The PIDSPEC argument taken for the --pid (or -p) option is a comma separated list of PIDs
       or TIDs. The list can also include brackets of PIDs or TIDs that are inclusive of the
       endpoints.

       For example:

           1,2,5               Means processes 1, 2 and 5
           1,2,600-700         Means processes 1, 2 and from 600 to 700

       # cset shield --shield --pid=50-65

       The above command moves all processes and threads with PID or TID in the range 50-65
       inclusive, from the system cpuset into the shielded user cpuset. If they are running in
       the root cpuset, you must use the --force option to actually move them into the shield.

           Note
           The range of PIDs or TIDs does not need to have every position populated. In other
           words, for the example above, if there is only one process, say PID 57, in the range
           of 50-65, then only that process will be moved.
       The --unshield (or -u) subcommand will remove the specified processes or threads from the
       shielded cpuset and move them into the unshielded (or system) cpuset. This command is also
       used in conjunction with a -p/--pid option that specifies a PIDSPEC argument, the same as
       for the --shield subcommand.

       Both the --shield and the --unshield commands will also finally output the number of tasks
       running in the shield and out of the shield if you do not specify a PIDSPEC with --pid. By
       specifying also a --verbose in addition, then you will get a listing of every task that is
       running in either the shield or out of the shield.

       Using no subcommand, ie. only "cset shield", will output the status of both shield and
       non-shield. Tasks will be listed if --verbose is used.

       You can adjust which CPUs are in the shielded cpuset by issuing the --cpu subcommand again
       anytime after the shield has been initialized.

       For example if the original shield contained CPU0 and CPU1 in the system set and CPU2 and
       CPU3 in the user set, if you then issue the following command:

       # cset shield --cpu=1,2,3

       then that command will move CPU1 into the shielded "user" cpuset. Any processes or threads
       that were running on CPU1 that belonged to the unshielded "system" cpuset are migrated to
       CPU0 by the system.

       The --reset subcommand will in essence destroy the shield. For example, if there was a
       shield on a 4-way machine with CPU0 in system and CPUs 1-3 in user with processes running
       on the user cpuset (i.e. in the shield), and a --reset subcommand was issued, then all
       processes running in both system and user cpusets would be migrated to the root cpuset
       (which has access to all CPUs and never goes away), after which both system and user
       cpusets would be destroyed.

           Note
           Even though you can mix general usage of cpusets with the shielding concepts described
           here, you generally will not want to. For more complex shielding or usage scenarios,
           one would generally use the normal cpuset commands (i.e. cset set and proc) directly.

LICENSE

       Cpuset is licensed under the GNU GPL V2 only.

COPYRIGHT

       Copyright (c) 2008-2011 Novell Inc.

AUTHOR

       Written by Alex Tsariounov <tsariounov@gmail.com>.

SEE ALSO

       cset(1), cset-set(1), cset-proc(1)

       /usr/share/doc/packages/cpuset/html/tutorial.html

       taskset(1), chrt(1)

       /usr/src/linux/Documentation/cpusets.txt

AUTHOR

       Alex Tsariounov <tsariounov@gmail.com>
           Author.

  1.5.8                                     March 2016                             CSET-SHIELD(1)