Provided by: dvipng_1.15-1.1_amd64 bug

NAME

       dvipng - A DVI-to-PNG translator

SYNOPSIS

       dvipng [options] filename

       dvipng [options] [filename] -

DESCRIPTION

       This program makes PNG and/or GIF graphics from DVI files as obtained from TeX and its
       relatives.

       If GIF support is enabled, GIF output is chosen by using the dvigif binary or with the
       --gif option.

       The benefits of dvipng/dvigif include

       *   Speed. It is a very fast bitmap-rendering code for DVI files, which makes it suitable
           for generating large amounts of images on-the-fly, as needed in preview-latex, WeBWorK
           and others.

       *   It does not read the postamble, so it can be started before TeX finishes. There is a
           --follow switch that makes dvipng wait at end-of-file for further output, unless it
           finds the POST marker that indicates the end of the DVI.

       *   Interactive query of options. dvipng can read options interactively through stdin, and
           all options are usable. It is even possible to change the input file through this
           interface.

       *   Supports PK, VF, PostScript Type1, and TrueType fonts, subfonts (i.e., as used in CJK-
           LaTeX), color specials, and inclusion of PostScript, PNG, JPEG or GIF images.

       *   and more...

OPTIONS

       Many of the parameterless options listed here can be turned off by suffixing the option
       with a zero (0); for instance, to turn off page reversal, use -r0.  Such options are
       marked with a trailing *.

       -   Read additional options from standard input after processing the command line.

       --help
           Print a usage message and exit.

       --version
           Print the version number and exit.

       -bd num
       -bd color_spec
       -bd 'num color_spec'
           Set the pixel width of the transparent border (default 0). Using this option will make
           the image edges transparent, but it only affects pixels with the background color.
           Giving a color_spec will set the fallback color, to be used in viewers that cannot
           handle transparency (the default is the background color). The color spec should be in
           TeX color \special syntax, e.g., 'rgb 1.0 0.0 0.0'. Setting the fallback color makes
           the default border width 1 px.

       --bdpi num
           This option only has an effect when using bitmapped (PK) fonts. The option sets the
           base (Metafont) resolution, both horizontal and vertical, to num dpi (dots per inch).
           This option is necessary when manually selecting Metafont mode with the --mode option
           (see below).

       -bg color_spec
           Choose background color for the images. This option will be ignored if there is a
           background color \special in the DVI. The color spec should be in TeX color \special
           syntax, e.g., 'rgb 1.0 0.0 0.0'. You can also specify 'Transparent' or 'transparent'
           which will give you a transparent background with the normal background as a fallback
           color. A capitalized 'Transparent' will give a full-alpha transparency, while an all-
           lowercase 'transparent' will give a simple fully transparent background with non-
           transparent antialiased pixels. The latter would be suitable for viewers who cannot
           cope with a true alpha channel.  GIF images do not support full alpha transparency, so
           in case of GIF output, both variants will use the latter behaviour.

       -d num
           Set the debug flags, showing what dvipng (thinks it) is doing. This will work unless
           dvipng has been compiled without the "DEBUG" option (not recommended). Set the flags
           as you need them, use -d -1 as the first option for maximum output.

       -D num
           Set the output resolution, both horizontal and vertical, to num dpi (dots per inch).

           One may want to adjust this to fit a certain text font size (e.g., on a web page), and
           for a text font height of font_px pixels (in Mozilla) the correct formula is

                   <dpi> = <font_px> * 72.27 / 10 [px * TeXpt/in / TeXpt]

           The last division by ten is due to the standard font height 10pt in your document, if
           you use 12pt, divide by 12. Unfortunately, some proprietary browsers have font height
           in pt (points), not pixels. You have to rescale that to pixels, using the screen
           resolution (default is usually 96 dpi) which means the formula is

                   <font_px> = <font_pt> * 96 / 72 [pt * px/in / (pt/in)]

           On some high-res screens, the value is instead 120 dpi. Good luck!

       --depth*
           Report the depth of the image. This only works reliably when the LaTeX style
           preview.sty from preview-latex is used with the active option. It reports the number
           of pixels from the bottom of the image to the baseline of the image. This can be used
           for vertical positioning of the image in, e.g., web documents, where one would use
           (Cascading StyleSheets 1)

                   <IMG SRC="<filename.png>" STYLE="vertical-align: -<depth>px">

           The depth is a negative offset in this case, so the minus sign is necessary, and the
           unit is pixels (px).

       --dvinum*
           Set this option to make the output page number be the TeX page numbers rather than the
           physical page number. See the -o switch.

       -fg color_spec
           Choose foreground color for the images. This option will be ignored if there is a
           foreground color \special in the DVI. The color spec should be in TeX color \special
           syntax, e.g., 'rgb 1.0 0.0 0.0'.

       --follow*
           Wait for data at end-of-file. One of the benefits of dvipng is that it does not read
           the postamble, so it can be started before TeX finishes. This switch makes dvipng wait
           at end-of-file for further output, unless it finds the POST marker that indicates the
           end of the DVI. This is similar to tail -f but for DVI-to-PNG conversion.

       --freetype*
           Enable/disable FreeType font rendering (default on). This option is available if the
           FreeType2 font library was present at compilation time.  If this is the case, dvipng
           will have direct support for PostScript Type1 and TrueType fonts internally, rather
           than using gsftopk for rendering the fonts. If you have PostScript versions of
           Computer Modern installed, there will be no need to generate bitmapped (PK) variants
           on disk of these. Then, you can render images at different (and unusual) resolutions
           without cluttering the disk with lots of bitmapped fonts.

       --gamma num
           Control the interpolation of colors in the greyscale anti-aliasing color palette.
           Default value is 1.0.  For 0 < num < 1, the fonts will be lighter (more like the
           background), and for num > 1, the fonts will be darker (more like the foreground).

       --gif*
           The images are output in the GIF format, if GIF support is enabled.  This is the
           default for the dvigif binary, which only will be available when GIF support is
           enabled. GIF images are palette images (see the --palette option) and does not support
           true alpha channels (see the --bg option). See also the --png option.

       --height*
           Report the height of the image. This only works reliably when the LaTeX style
           preview.sty from preview-latex is used with the active option. It reports the number
           of pixels from the top of the image to the baseline of the image. The total height of
           the image is obtained as the sum of the values reported from --height and --depth.

       -l [=]num
           The last page printed will be the first one numbered num. Default is the last page in
           the document.  If num is prefixed by an equals sign, then it (and the argument to the
           -p option, if specified) is treated as a physical (absolute) page number, rather than
           a value to compare with the TeX \count0 values stored in the DVI file.  Thus, using -l
           =9 will end with the ninth page of the document, no matter what the pages are actually
           numbered.

       --mode mode
           This option only has an effect when using bitmapped (PK) fonts. Use mode as the
           Metafont device name for the PK fonts (both for path searching and font generation).
           This needs to be augmented with the base device resolution, given with the --bdpi
           option. See the file <ftp://ftp.tug.org/tex/modes.mf> for a list of resolutions and
           mode names for most devices.

       -M* This option only has an effect when using bitmapped (PK) fonts. It turns off automatic
           PK font generation (mktexpk).

       --nogs*
           This switch prohibits the internal call to GhostScript for displaying PostScript
           specials. --nogs0 turns the call back on.

       --nogssafer*
           Normally, if GhostScript is used to render PostScript specials, the GhostScript
           interpreter is run with the option -dSAFER. The --nogssafer option runs GhostScript
           without -dSAFER. The -dSAFER option in Ghostscript disables PostScript operators such
           as deletefile, to prevent possibly malicious PostScript programs from having any
           effect.

       --norawps*
           Some packages generate raw PostScript specials, even non-rendering such specials.
           This switch turns off the internal call to GhostScript intended to display these raw
           PostScript specials. --norawps0 turns the call back on.

       -o name
           Send output to the file name. A single occurrence of %d or %01d, ..., %09d will be
           exchanged for the physical page number (this can be changed, see the --dvinum switch).
           The default output filename is file%d.png where the input DVI file was file.dvi.

       -O x-offset,y-offset
           Move the origin by x-offset,y-offset, a comma-separated pair of dimensions such as
           .1in,-.3cm.  The origin of the page is shifted from the default position (of one inch
           down, one inch to the right from the upper left corner of the paper) by this amount.

       -p [=]num
           The first page printed will be the first one numbered num. Default is the first page
           in the document.  If num is prefixed by an equals sign, then it (and the argument to
           the -l option, if specified) is treated as a physical (absolute) page number, rather
           than a value to compare with the TeX \count0 values stored in the DVI file.  Thus,
           using -p =3 will start with the third page of the document, no matter what the pages
           are actually numbered.

       --palette*
           When an external image is included, dvipng will automatically switch to truecolor
           mode, to avoid unnecessary delay and quality reduction, and enable the EPS translator
           to draw on a transparent background and outside of the boundingbox. This switch will
           force palette (256-color) output and make dvipng revert to opaque clipped image
           inclusion. This will also override the --truecolor switch if present.

       --picky*
           No images are output when a warning occurs. Normally, dvipng will output an image in
           spite of a warning, but there may be something missing in this image. One reason to
           use this option would be if you have a more complete but slower fallback converter.
           Mainly, this is useful for failed figure inclusion and unknown \special occurrences,
           but warnings will also occur for missing or unknown color specs and missing PK fonts.

       --png*
           The images are output in the PNG format. This is the default for the dvipng binary.
           See also the --gif option.

       -pp firstpage-lastpage
           Print pages firstpage through lastpage; but not quite equivalent to -p firstpage -l
           lastpage. For example, when rendering a book, there may be several instances of a page
           in the DVI file (one in "\frontmatter", one in "\mainmatter", and one in
           "\backmatter"). In case of several pages matching, -pp firstpage-lastpage will render
           all pages that matches the specified range, while -p firstpage -l lastpage will render
           the pages from the first occurrence of firstpage to the first occurrence of lastpage.
           This is the (undocumented) behaviour of dvips. In dvipng you can give both kinds of
           options, in which case you get all pages that matches the range in -pp between the
           pages from -p to -l. Also multiple -pp options accumulate, unlike -p and -l.  The -
           separator can also be :. Note that -pp -1 will be interpreted as "all pages up to and
           including 1", if you want a page numbered -1 (only the table of contents, say) put -pp
           -1--1, or more readable, -pp -1:-1.

       -q* Run quietly.  Don't chatter about pages converted, etc. to standard output; report no
           warnings (only errors) to standard error.

       -Q num
           Set the quality to num. That is, choose the number of antialiasing levels for
           bitmapped fonts (PK), to be num*num+1. The default value is 4 which gives 17 levels of
           antialiasing for antialiased fonts from these two. If FreeType is available, its
           rendering is unaffected by this option.

       -r* Toggle output of pages in reverse/forward order. By default, the first page in the DVI
           is output first.

       --strict*
           The program exits when a warning occurs. Normally, dvipng will output an image in
           spite of a warning, but there may be something missing in this image. One reason to
           use this option would be if you have a more complete but slower fallback converter.
           See the --picky option above for a list of when warnings occur.

       -T image_size
           Set the image size to image_size which can be either of bbox, tight, or a comma-
           separated pair of dimensions hsize,vsize such as .1in,.3cm. The default is bbox which
           produces a PNG that includes all ink put on the page and in addition the DVI origin,
           located 1in from the top and 1in from the left edge of the paper. This usually gives
           whitespace above and to the left in the produced image. The value tight will make
           dvipng only include all ink put on the page, producing neat images.

       --truecolor*
           This will make dvipng generate truecolor output. Note that truecolor output is
           automatic if you include an external image in your DVI, e.g., via a PostScript special
           (i.e., the graphics or graphicx package). This switch is overridden by the --palette
           switch.

       -v* Enable verbose operation. This will currently indicate what fonts is used, in addition
           to the usual output.

       --width*
           Report the width of the image. See also --height and --depth.

       -x num
           This option is deprecated; it should not be used. It is much better to select the
           output resolution directly with the -D option. This option sets the magnification
           ratio to num/1000 and overrides the magnification specified in the DVI file.  Must be
           between 10 and 100000.  It is recommended that you use standard magstep values (1095,
           1200, 1440, 1728, 2074, 2488, 2986, and so on) to help reduce the total number of PK
           files generated.  num may be a real number, not an integer, for increased precision.

       -z num
           Set the PNG compression level to num. This option is enabled if your libgd is new
           enough. The default compression level is 1, which selects maximum speed at the price
           of slightly larger PNGs. For an older libgd, the hard-soldered value 5 is used. The
           include file png.h says "Currently, valid values range from 0 - 9, corresponding
           directly to the zlib compression levels 0 - 9 (0 - no compression, 9 - "maximal"
           compression). Note that tests have shown that zlib compression levels 3-6 usually
           perform as well as level 9 for PNG images, and do considerably fewer calculations. In
           the future, these values may not correspond directly to the zlib compression levels."

NOTES

       The full manual is accessible in info format, on most systems by typing

               info dvipng

COPYRIGHT

       This program is released under the GNU Lesser General Public License version 3, see the
       COPYING file in the dvipng distribution or <http://www.gnu.org/licenses/gpl.html>.

       Copyright (c) 2002-2015 Jan-AAke Larsson