Provided by: ganeti-htools-2.16_2.16.1-2ubuntu1_amd64 
NAME
hbal - Cluster balancer for Ganeti
SYNOPSIS
hbal {backend options...} [algorithm options...] [reporting options...]
hbal --version
Backend options:
{ -m cluster | -L[ path ] [-X] | -t data-file | -I path }
Algorithm options:
[ --max-cpu *cpu-ratio* ] [ --min-disk *disk-ratio* ] [ -l *limit* ] [ -e *score* ] [ -g
*delta* ] [ --min-gain-limit *threshold* ] [ -O *name...* ] [ --no-disk-moves ] [
--no-instance-moves ] [ -U *util-file* ] [ --ignore-dynu ] [ --ignore-soft-errors ] [
--mond *yes|no* ] [ --mond-xen ] [ --exit-on-missing-mond-data ] [ --evac-mode ] [
--restricted-migration ] [ --select-instances *inst...* ] [ --exclude-instances *inst...*
]
Reporting options:
[ -C[ *file* ] ] [ -p[ *fields* ] ] [ --print-instances ] [ -S *file* ] [ -v... | -q ]
DESCRIPTION
hbal is a cluster balancer that looks at the current state of the cluster (nodes with
their total and free disk, memory, etc.) and instance placement and computes a series of
steps designed to bring the cluster into a better state.
The algorithm used is designed to be stable (i.e. it will give you the same results when
restarting it from the middle of the solution) and reasonably fast. It is not, however,
designed to be a perfect algorithm: it is possible to make it go into a corner from which
it can find no improvement, because it looks only one "step" ahead.
The program accesses the cluster state via Rapi or Luxi. It also requests data over the
network from all MonDs with the --mond option. Currently it uses only data produced by
CPUload collector.
By default, the program will show the solution incrementally as it is computed, in a
somewhat cryptic format; for getting the actual Ganeti command list, use the -C option.
ALGORITHM
The program works in independent steps; at each step, we compute the best instance move
that lowers the cluster score.
The possible move type for an instance are combinations of failover/migrate and
replace-disks such that we change one of the instance nodes, and the other one remains
(but possibly with changed role, e.g. from primary it becomes secondary). The list is:
· failover (f)
· replace secondary (r)
· replace primary, a composite move (f, r, f)
· failover and replace secondary, also composite (f, r)
· replace secondary and failover, also composite (r, f)
We don't do the only remaining possibility of replacing both nodes (r,f,r,f or the
equivalent f,r,f,r) since these move needs an exhaustive search over both candidate
primary and secondary nodes, and is O(n*n) in the number of nodes. Furthermore, it
doesn't seems to give better scores but will result in more disk replacements.
PLACEMENT RESTRICTIONS
At each step, we prevent an instance move if it would cause:
· a node to go into N+1 failure state
· an instance to move onto an offline node (offline nodes are either read from the cluster
or declared with -O; drained nodes are considered offline)
· an exclusion-tag based conflict (exclusion tags are read from the cluster and/or defined
via the --exclusion-tags option)
· a max vcpu/pcpu ratio to be exceeded (configured via --max-cpu)
· min disk free percentage to go below the configured limit (configured via --min-disk)
CLUSTER SCORING
As said before, the algorithm tries to minimise the cluster score at each step. Currently
this score is computed as a weighted sum of the following components:
· standard deviation of the percent of free memory
· standard deviation of the percent of reserved memory
· the sum of the percentages of reserved memory
· standard deviation of the percent of free disk
· count of nodes failing N+1 check
· count of instances living (either as primary or secondary) on offline nodes; in the
sense of hbal (and the other htools) drained nodes are considered offline
· count of instances living (as primary) on offline nodes; this differs from the above
metric by helping failover of such instances in 2-node clusters
· standard deviation of the ratio of virtual-to-physical cpus (for primary instances of
the node)
· standard deviation of the fraction of the available spindles (in dedicated mode,
spindles represent physical spindles; otherwise this oversubscribable measure for IO
load, and the oversubscription factor is taken into account when computing the number of
available spindles)
· standard deviation of the dynamic load on the nodes, for cpus, memory, disk and network
· standard deviation of the CPU load provided by MonD
· the count of instances with primary and secondary in the same failure domain
· the count of instances sharing the same exclusion tags which primary instances placed in
the same failure domain
· the overall sum of dissatisfied desired locations among all cluster instances
The free memory and free disk values help ensure that all nodes are somewhat balanced in
their resource usage. The reserved memory helps to ensure that nodes are somewhat
balanced in holding secondary instances, and that no node keeps too much memory reserved
for N+1. And finally, the N+1 percentage helps guide the algorithm towards eliminating
N+1 failures, if possible.
Except for the N+1 failures, offline instances counts, failure domain violation counts and
desired locations count, we use the standard deviation since when used with values within
a fixed range (we use percents expressed as values between zero and one) it gives
consistent results across all metrics (there are some small issues related to different
means, but it works generally well). The 'count' type values will have higher score and
thus will matter more for balancing; thus these are better for hard constraints (like
evacuating nodes and fixing N+1 failures). For example, the offline instances count (i.e.
the number of instances living on offline nodes) will cause the algorithm to actively move
instances away from offline nodes. This, coupled with the restriction on placement given
by offline nodes, will cause evacuation of such nodes.
The dynamic load values need to be read from an external file (Ganeti doesn't supply
them), and are computed for each node as: sum of primary instance cpu load, sum of primary
instance memory load, sum of primary and secondary instance disk load (as DRBD generates
write load on secondary nodes too in normal case and in degraded scenarios also read
load), and sum of primary instance network load. An example of how to generate these
values for input to hbal would be to track xm list for instances over a day and by
computing the delta of the cpu values, and feed that via the -U option for all instances
(and keep the other metrics as one). For the algorithm to work, all that is needed is
that the values are consistent for a metric across all instances (e.g. all instances use
cpu% to report cpu usage, and not something related to number of CPU seconds used if the
CPUs are different), and that they are normalised to between zero and one. Note that it's
recommended to not have zero as the load value for any instance metric since then
secondary instances are not well balanced.
The CPUload from MonD's data collector will be used only if all MonDs are running,
otherwise it won't affect the cluster score. Since we can't find the CPU load of each
instance, we can assume that the CPU load of an instance is proportional to the number of
its vcpus. With this heuristic, instances from nodes with high CPU load will tend to move
to nodes with less CPU load.
On a perfectly balanced cluster (all nodes the same size, all instances the same size and
spread across the nodes equally, all desired locations satisfied), the values for all
metrics would be zero, with the exception of the total percentage of reserved memory.
This doesn't happen too often in practice :)
OFFLINE INSTANCES
Since current Ganeti versions do not report the memory used by offline (down) instances,
ignoring the run status of instances will cause wrong calculations. For this reason, the
algorithm subtracts the memory size of down instances from the free node memory of their
primary node, in effect simulating the startup of such instances.
DESIRED LOCATION TAGS
Sometimes, administrators want specific instances located in a particular, typically
geographic, location. To suppoer this desired location tags are introduced.
If the cluster is tagged htools:desiredlocation:x then tags starting with x are desired
location tags. Instances can be assigned tags of the form x that means that instance
wants to be placed on a node tagged with a location tag x. (That means that cluster
should be tagged htools:nlocation:x too).
Instance pinning is just heuristics, not a hard enforced requirement; it will only be
achieved by the cluster metrics favouring such placements.
EXCLUSION TAGS
The exclusion tags mechanism is designed to prevent instances which run the same workload
(e.g. two DNS servers) to land on the same node, which would make the respective node a
SPOF for the given service.
It works by tagging instances with certain tags and then building exclusion maps based on
these. Which tags are actually used is configured either via the command line (option
--exclusion-tags) or via adding them to the cluster tags:
--exclusion-tags=a,b
This will make all instance tags of the form a:*, b:* be considered for the
exclusion map
cluster tags htools:iextags:a, htools:iextags:b
This will make instance tags a:*, b:* be considered for the exclusion map. More
precisely, the suffix of cluster tags starting with htools:iextags: will become the
prefix of the exclusion tags.
Both the above forms mean that two instances both having (e.g.) the tag a:foo or b:bar
won't end on the same node.
MIGRATION TAGS
If Ganeti is deployed on a heterogeneous cluster, migration might not be possible between
all nodes of a node group. One example of such a situation is upgrading the hypervisor
node by node. To make hbal aware of those restrictions, the following cluster tags are
used.
cluster tags htools:migration:a, htools:migration:b, etc
This make make node tags of the form a:*, b:*, etc be considered migration
restriction. More precisely, the suffix of cluster tags starting with
htools:migration: will become the prefix of the migration tags. Only those
migrations will be taken into consideration where all migration tags of the source
node are also present on the target node.
cluster tags htools:allowmigration:x::y for migration tags x and y
This asserts that a node taged y is able to receive instances in the same way as if
they had an x tag.
So in the simple case of a hypervisor upgrade, tagging all the nodes that have been
upgraded with a migration tag suffices. In more complicated situations, it is always
possible to use a different migration tag for each hypervisor used and explictly state the
allowed migration directions by means of htools:allowmigration: tags.
LOCATION TAGS
Within a node group, certain nodes might be more likely to fail simultaneously due to a
common cause of error (e.g., if they share the same power supply unit). Ganeti can be
made aware of thos common causes of failure by means of tags.
cluster tags htools:nlocation:a, htools:nlocation:b, etc
This make make node tags of the form a:*, b:*, etc be considered to have a common
cause of failure.
Instances with primary and secondary node having a common cause of failure and instances
sharing the same exclusion tag with primary nodes having a common failure are considered
badly placed. While such placements are always allowed, they count heavily towards the
cluster score.
OPTIONS
The options that can be passed to the program are as follows:
-C, --print-commands
Print the command list at the end of the run. Without this, the program will only
show a shorter, but cryptic output.
Note that the moves list will be split into independent steps, called "jobsets",
but only for visual inspection, not for actually parallelisation. It is not
possible to parallelise these directly when executed via "gnt-instance" commands,
since a compound command (e.g. failover and replace-disks) must be executed
serially. Parallel execution is only possible when using the Luxi backend and the
-L option.
The algorithm for splitting the moves into jobsets is by accumulating moves until
the next move is touching nodes already touched by the current moves; this means we
can't execute in parallel (due to resource allocation in Ganeti) and thus we start
a new jobset.
-p, --print-nodes
Prints the before and after node status, in a format designed to allow the user to
understand the node's most important parameters. See the man page htools(1) for
more details about this option.
--print-instances
Prints the before and after instance map. This is less useful as the node status,
but it can help in understanding instance moves.
-O name
This option (which can be given multiple times) will mark nodes as being offline.
This means a couple of things:
· instances won't be placed on these nodes, not even temporarily; e.g. the replace
primary move is not available if the secondary node is offline, since this move
requires a failover.
· these nodes will not be included in the score calculation (except for the
percentage of instances on offline nodes)
Note that algorithm will also mark as offline any nodes which are reported by RAPI
as such, or that have "?" in file-based input in any numeric fields.
-e score, --min-score=*score*
This parameter denotes how much above the N+1 bound the cluster score can for us to
be happy with and alters the computation in two ways:
· if the cluster has the initial score lower than this value, then we don't enter
the algorithm at all, and exit with success
· during the iterative process, if we reach a score lower than this value, we exit
the algorithm
The default value of the parameter is currently 1e-9 (chosen empirically).
-g delta, --min-gain=*delta*
Since the balancing algorithm can sometimes result in just very tiny improvements,
that bring less gain that they cost in relocation time, this parameter (defaulting
to 0.01) represents the minimum gain we require during a step, to continue
balancing.
--min-gain-limit=*threshold*
The above min-gain option will only take effect if the cluster score is already
below threshold (defaults to 0.1). The rationale behind this setting is that at
high cluster scores (badly balanced clusters), we don't want to abort the rebalance
too quickly, as later gains might still be significant. However, under the
threshold, the total gain is only the threshold value, so we can exit early.
--no-disk-moves
This parameter prevents hbal from using disk move (i.e. "gnt-instance
replace-disks") operations. This will result in a much quicker balancing, but of
course the improvements are limited. It is up to the user to decide when to use
one or another.
--no-instance-moves
This parameter prevents hbal from using instance moves (i.e. "gnt-instance
migrate/failover") operations. This will only use the slow disk-replacement
operations, and will also provide a worse balance, but can be useful if moving
instances around is deemed unsafe or not preferred.
--evac-mode
This parameter restricts the list of instances considered for moving to the ones
living on offline/drained nodes. It can be used as a (bulk) replacement for
Ganeti's own gnt-node evacuate, with the note that it doesn't guarantee full
evacuation.
--restricted-migration
This parameter disallows any replace-primary moves (frf), as well as those
replace-and-failover moves (rf) where the primary node of the instance is not
drained. If used together with the --evac-mode option, the only migrations that
hbal will do are migrations of instances off a drained node. This can be useful if
during a reinstall of the base operating system migration is only possible from the
old OS to the new OS. Note, however, that usually the use of migration tags is the
better choice.
--select-instances=*instances*
This parameter marks the given instances (as a comma-separated list) as the only
ones being moved during the rebalance.
--exclude-instances=*instances*
This parameter marks the given instances (as a comma-separated list) from being
moved during the rebalance.
-U util-file
This parameter specifies a file holding instance dynamic utilisation information
that will be used to tweak the balancing algorithm to equalise load on the nodes
(as opposed to static resource usage). The file is in the format "instance_name
cpu_util mem_util disk_util net_util" where the "_util" parameters are interpreted
as numbers and the instance name must match exactly the instance as read from
Ganeti. In case of unknown instance names, the program will abort.
If not given, the default values are one for all metrics and thus dynamic
utilisation has only one effect on the algorithm: the equalisation of the secondary
instances across nodes (this is the only metric that is not tracked by another,
dedicated value, and thus the disk load of instances will cause secondary instance
equalisation). Note that value of one will also influence slightly the primary
instance count, but that is already tracked via other metrics and thus the
influence of the dynamic utilisation will be practically insignificant.
--ignore-dynu
If given, all dynamic utilisation information will be ignored by assuming it to be
0. This option will take precedence over any data passed by the -U option or by
the MonDs with the --mond and the --mond-data option.
--ignore-soft-errors
If given, all checks for soft errors will be ommitted when considering balancing
moves. In this way, progress can be made in a cluster where all nodes are in a
policy-wise bad state, like exceeding oversubscription ratios on CPU or spindles.
-S filename, --save-cluster=*filename*
If given, the state of the cluster before the balancing is saved to the given file
plus the extension "original" (i.e. filename.original), and the state at the end
of the balancing is saved to the given file plus the extension "balanced" (i.e.
filename.balanced). This allows re-feeding the cluster state to either hbal itself
or for example hspace via the -t option.
-t datafile, --text-data=*datafile*
Backend specification: the name of the file holding node and instance information
(if not collecting via RAPI or LUXI). This or one of the other backends must be
selected. The option is described in the man page htools(1).
--mond=*yes|no*
If given the program will query all MonDs to fetch data from the supported data
collectors over the network.
--mond-xen
If given, also query Xen-specific collectors from MonD, provided that monitoring
daemons are queried at all.
--exit-on-missing-mond-data
If given, abort if the data obtainable from querying MonDs is incomplete. The
default behavior is to continue with a best guess based on the static information.
--mond-data datafile
The name of the file holding the data provided by MonD, to override quering MonDs
over the network. This is mostly used for debugging. The file must be in JSON
format and present an array of JSON objects , one for every node, with two members.
The first member named node is the name of the node and the second member named
reports is an array of report objects. The report objects must be in the same
format as produced by the monitoring agent.
-m cluster
Backend specification: collect data directly from the cluster given as an argument
via RAPI. The option is described in the man page htools(1).
-L [path]
Backend specification: collect data directly from the master daemon, which is to be
contacted via LUXI (an internal Ganeti protocol). The option is described in the
man page htools(1).
-X When using the Luxi backend, hbal can also execute the given commands. The
execution method is to execute the individual jobsets (see the -C option for
details) in separate stages, aborting if at any time a jobset doesn't have all jobs
successful. Each step in the balancing solution will be translated into exactly
one Ganeti job (having between one and three OpCodes), and all the steps in a
jobset will be executed in parallel. The jobsets themselves are executed serially.
The execution of the job series can be interrupted, see below for signal handling.
-l N, --max-length=*N*
Restrict the solution to this length. This can be used for example to automate the
execution of the balancing.
--max-cpu=*cpu-ratio*
The maximum virtual to physical cpu ratio, as a floating point number greater than
or equal to one. For example, specifying cpu-ratio as 2.5 means that, for a 4-cpu
machine, a maximum of 10 virtual cpus should be allowed to be in use for primary
instances. A value of exactly one means there will be no over-subscription of CPU
(except for the CPU time used by the node itself), and values below one do not make
sense, as that means other resources (e.g. disk) won't be fully utilised due to
CPU restrictions.
--min-disk=*disk-ratio*
The minimum amount of free disk space remaining, as a floating point number. For
example, specifying disk-ratio as 0.25 means that at least one quarter of disk
space should be left free on nodes.
-G uuid, --group=*uuid*
On an multi-group cluster, select this group for processing. Otherwise hbal will
abort, since it cannot balance multiple groups at the same time.
-v, --verbose
Increase the output verbosity. Each usage of this option will increase the
verbosity (currently more than 2 doesn't make sense) from the default of one.
-q, --quiet
Decrease the output verbosity. Each usage of this option will decrease the
verbosity (less than zero doesn't make sense) from the default of one.
-V, --version
Just show the program version and exit.
SIGNAL HANDLING
When executing jobs via LUXI (using the -X option), normally hbal will execute all jobs
until either one errors out or all the jobs finish successfully.
Since balancing can take a long time, it is possible to stop hbal early in two ways:
· by sending a SIGINT (^C), hbal will register the termination request, and will wait
until the currently submitted jobs finish, at which point it will exit (with exit code 0
if all jobs finished correctly, otherwise with exit code 1 as usual)
· by sending a SIGTERM, hbal will immediately exit (with exit code 2); it is the
responsibility of the user to follow up with Ganeti and check the result of the
currently-executing jobs
Note that in any situation, it's perfectly safe to kill hbal, either via the above signals
or via any other signal (e.g. SIGQUIT, SIGKILL), since the jobs themselves are processed
by Ganeti whereas hbal (after submission) only watches their progression. In this case,
the user will have to query Ganeti for job results.
EXIT STATUS
The exit status of the command will be zero, unless for some reason the algorithm failed
(e.g. wrong node or instance data), invalid command line options, or (in case of job
execution) one of the jobs has failed.
Once job execution via Luxi has started (-X), if the balancing was interrupted early (via
SIGINT, or via --max-length) but all jobs executed successfully, then the exit status is
zero; a non-zero exit code means that the cluster state should be investigated, since a
job failed or we couldn't compute its status and this can also point to a problem on the
Ganeti side.
BUGS
The program does not check all its input data for consistency, and sometime aborts with
cryptic errors messages with invalid data.
The algorithm is not perfect.
EXAMPLE
Note that these examples are not for the latest version (they don't have full node data).
Default output
With the default options, the program shows each individual step and the improvements it
brings in cluster score:
$ hbal
Loaded 20 nodes, 80 instances
Cluster is not N+1 happy, continuing but no guarantee that the cluster will end N+1 happy.
Initial score: 0.52329131
Trying to minimize the CV...
1. instance14 node1:node10 => node16:node10 0.42109120 a=f r:node16 f
2. instance54 node4:node15 => node16:node15 0.31904594 a=f r:node16 f
3. instance4 node5:node2 => node2:node16 0.26611015 a=f r:node16
4. instance48 node18:node20 => node2:node18 0.21361717 a=r:node2 f
5. instance93 node19:node18 => node16:node19 0.16166425 a=r:node16 f
6. instance89 node3:node20 => node2:node3 0.11005629 a=r:node2 f
7. instance5 node6:node2 => node16:node6 0.05841589 a=r:node16 f
8. instance94 node7:node20 => node20:node16 0.00658759 a=f r:node16
9. instance44 node20:node2 => node2:node15 0.00438740 a=f r:node15
10. instance62 node14:node18 => node14:node16 0.00390087 a=r:node16
11. instance13 node11:node14 => node11:node16 0.00361787 a=r:node16
12. instance19 node10:node11 => node10:node7 0.00336636 a=r:node7
13. instance43 node12:node13 => node12:node1 0.00305681 a=r:node1
14. instance1 node1:node2 => node1:node4 0.00263124 a=r:node4
15. instance58 node19:node20 => node19:node17 0.00252594 a=r:node17
Cluster score improved from 0.52329131 to 0.00252594
In the above output, we can see:
· the input data (here from files) shows a cluster with 20 nodes and 80 instances
· the cluster is not initially N+1 compliant
· the initial score is 0.52329131
The step list follows, showing the instance, its initial primary/secondary nodes, the new
primary secondary, the cluster list, and the actions taken in this step (with 'f' denoting
failover/migrate and 'r' denoting replace secondary).
Finally, the program shows the improvement in cluster score.
A more detailed output is obtained via the -C and -p options:
$ hbal
Loaded 20 nodes, 80 instances
Cluster is not N+1 happy, continuing but no guarantee that the cluster will end N+1 happy.
Initial cluster status:
N1 Name t_mem f_mem r_mem t_dsk f_dsk pri sec p_fmem p_fdsk
* node1 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
node2 32762 31280 12000 1861 1026 0 8 0.95476 0.55179
* node3 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
* node4 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
* node5 32762 1280 6000 1861 978 5 5 0.03907 0.52573
* node6 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
* node7 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
node8 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node9 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
* node10 32762 7280 12000 1861 1026 4 4 0.22221 0.55179
node11 32762 7280 6000 1861 922 4 5 0.22221 0.49577
node12 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node13 32762 7280 6000 1861 922 4 5 0.22221 0.49577
node14 32762 7280 6000 1861 922 4 5 0.22221 0.49577
* node15 32762 7280 12000 1861 1131 4 3 0.22221 0.60782
node16 32762 31280 0 1861 1860 0 0 0.95476 1.00000
node17 32762 7280 6000 1861 1106 5 3 0.22221 0.59479
* node18 32762 1280 6000 1396 561 5 3 0.03907 0.40239
* node19 32762 1280 6000 1861 1026 5 3 0.03907 0.55179
node20 32762 13280 12000 1861 689 3 9 0.40535 0.37068
Initial score: 0.52329131
Trying to minimize the CV...
1. instance14 node1:node10 => node16:node10 0.42109120 a=f r:node16 f
2. instance54 node4:node15 => node16:node15 0.31904594 a=f r:node16 f
3. instance4 node5:node2 => node2:node16 0.26611015 a=f r:node16
4. instance48 node18:node20 => node2:node18 0.21361717 a=r:node2 f
5. instance93 node19:node18 => node16:node19 0.16166425 a=r:node16 f
6. instance89 node3:node20 => node2:node3 0.11005629 a=r:node2 f
7. instance5 node6:node2 => node16:node6 0.05841589 a=r:node16 f
8. instance94 node7:node20 => node20:node16 0.00658759 a=f r:node16
9. instance44 node20:node2 => node2:node15 0.00438740 a=f r:node15
10. instance62 node14:node18 => node14:node16 0.00390087 a=r:node16
11. instance13 node11:node14 => node11:node16 0.00361787 a=r:node16
12. instance19 node10:node11 => node10:node7 0.00336636 a=r:node7
13. instance43 node12:node13 => node12:node1 0.00305681 a=r:node1
14. instance1 node1:node2 => node1:node4 0.00263124 a=r:node4
15. instance58 node19:node20 => node19:node17 0.00252594 a=r:node17
Cluster score improved from 0.52329131 to 0.00252594
Commands to run to reach the above solution:
echo step 1
echo gnt-instance migrate instance14
echo gnt-instance replace-disks -n node16 instance14
echo gnt-instance migrate instance14
echo step 2
echo gnt-instance migrate instance54
echo gnt-instance replace-disks -n node16 instance54
echo gnt-instance migrate instance54
echo step 3
echo gnt-instance migrate instance4
echo gnt-instance replace-disks -n node16 instance4
echo step 4
echo gnt-instance replace-disks -n node2 instance48
echo gnt-instance migrate instance48
echo step 5
echo gnt-instance replace-disks -n node16 instance93
echo gnt-instance migrate instance93
echo step 6
echo gnt-instance replace-disks -n node2 instance89
echo gnt-instance migrate instance89
echo step 7
echo gnt-instance replace-disks -n node16 instance5
echo gnt-instance migrate instance5
echo step 8
echo gnt-instance migrate instance94
echo gnt-instance replace-disks -n node16 instance94
echo step 9
echo gnt-instance migrate instance44
echo gnt-instance replace-disks -n node15 instance44
echo step 10
echo gnt-instance replace-disks -n node16 instance62
echo step 11
echo gnt-instance replace-disks -n node16 instance13
echo step 12
echo gnt-instance replace-disks -n node7 instance19
echo step 13
echo gnt-instance replace-disks -n node1 instance43
echo step 14
echo gnt-instance replace-disks -n node4 instance1
echo step 15
echo gnt-instance replace-disks -n node17 instance58
Final cluster status:
N1 Name t_mem f_mem r_mem t_dsk f_dsk pri sec p_fmem p_fdsk
node1 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node2 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node3 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node4 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node5 32762 7280 6000 1861 1078 4 5 0.22221 0.57947
node6 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node7 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node8 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node9 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node10 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node11 32762 7280 6000 1861 1022 4 4 0.22221 0.54951
node12 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node13 32762 7280 6000 1861 1022 4 4 0.22221 0.54951
node14 32762 7280 6000 1861 1022 4 4 0.22221 0.54951
node15 32762 7280 6000 1861 1031 4 4 0.22221 0.55408
node16 32762 7280 6000 1861 1060 4 4 0.22221 0.57007
node17 32762 7280 6000 1861 1006 5 4 0.22221 0.54105
node18 32762 7280 6000 1396 761 4 2 0.22221 0.54570
node19 32762 7280 6000 1861 1026 4 4 0.22221 0.55179
node20 32762 13280 6000 1861 1089 3 5 0.40535 0.58565
Here we see, beside the step list, the initial and final cluster status, with the final
one showing all nodes being N+1 compliant, and the command list to reach the final
solution. In the initial listing, we see which nodes are not N+1 compliant.
The algorithm is stable as long as each step above is fully completed, e.g. in step 8,
both the migrate and the replace-disks are done. Otherwise, if only the migrate is done,
the input data is changed in a way that the program will output a different solution list
(but hopefully will end in the same state).
REPORTING BUGS
Report bugs to project website (http://code.google.com/p/ganeti/) or contact the
developers using the Ganeti mailing list (ganeti@googlegroups.com).
SEE ALSO
Ganeti overview and specifications: ganeti(7) (general overview), ganeti-os-interface(7)
(guest OS definitions), ganeti-extstorage-interface(7) (external storage providers).
Ganeti commands: gnt-cluster(8) (cluster-wide commands), gnt-job(8) (job-related
commands), gnt-node(8) (node-related commands), gnt-instance(8) (instance commands),
gnt-os(8) (guest OS commands), gnt-storage(8) (storage commands), gnt-group(8) (node group
commands), gnt-backup(8) (instance import/export commands), gnt-debug(8) (debug commands).
Ganeti daemons: ganeti-watcher(8) (automatic instance restarter), ganeti-cleaner(8) (job
queue cleaner), ganeti-noded(8) (node daemon), ganeti-rapi(8) (remote API daemon).
Ganeti htools: htools(1) (generic binary), hbal(1) (cluster balancer), hspace(1) (capacity
calculation), hail(1) (IAllocator plugin), hscan(1) (data gatherer from remote clusters),
hinfo(1) (cluster information printer), mon-collector(7) (data collectors interface).
COPYRIGHT
Copyright (C) 2006-2015 Google Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.