Provided by: img2pdf_0.3.3-1ubuntu3.1_all 
NAME
img2pdf.py - lossless conversion of raster images to pdf
DESCRIPTION
usage: img2pdf.py [-h] [-v] [-V] [-o out] [-C colorspace] [-D]
[--without-pdfrw] [--first-frame-only] [--pillow-limit-break] [-S LxL] [-s LxL] [-b
L[:L]] [-f FIT] [-a] [--title title] [--author author] [--creator creator]
[--producer producer] [--creationdate creationdate] [--moddate moddate] [--subject
subject] [--keywords kw [kw ...]] [--viewer-panes PANES] [--viewer-initial-page
NUM] [--viewer-magnification MAG] [--viewer-page-layout LAYOUT]
[--viewer-fit-window] [--viewer-center-window] [--viewer-fullscreen] [infile
[infile ...]]
Losslessly convert raster images to PDF without re-encoding PNG, JPEG, and JPEG2000
images. This leads to a lossless conversion of PNG, JPEG and JPEG2000 images with the only
added file size coming from the PDF container itself. Other raster graphics formats are
losslessly stored using the same encoding that PNG uses. Since PDF does not support images
with transparency and since img2pdf aims to never be lossy, input images with an alpha
channel are not supported.
The output is sent to standard output so that it can be redirected into a file or to
another program as part of a shell pipe. To directly write the output into a file, use the
-o or --output option.
OPTIONS
positional arguments:
infile Specifies the input file(s) in any format that can be read by the Python Imaging
Library (PIL). If no input images are given, then a single image is read from
standard input. The special filename "-" can be used once to read an image from
standard input. To read a file in the current directory with the filename "-", pass
it to img2pdf by explicitly stating its relative path like "./-".
optional arguments:
-h, --help
show this help message and exit
-v, --verbose
Makes the program operate in verbose mode, printing messages on standard error.
-V, --version
Prints version information and exits.
General output arguments:
Arguments controlling the output format.
-o out, --output out
Makes the program output to a file instead of standard output.
-C colorspace, --colorspace colorspace
Forces the PIL colorspace. See the epilogue for a list of possible values. Usually
the PDF colorspace would be derived from the color space of the input image. This
option overwrites the automatically detected colorspace from the input image and
thus forces a certain colorspace in the output PDF /ColorSpace property. This is
useful for JPEG 2000 images with a different colorspace than RGB.
-D, --nodate
Suppresses timestamps in the output and thus makes the output deterministic between
individual runs. You can also manually set a date using the --moddate and
--creationdate options.
--without-pdfrw
By default, img2pdf uses the pdfrw library to create the output PDF if pdfrw is
available. If you want to use the internal PDF generator of img2pdf even if pdfrw
is present, then pass this option. This can be useful if you want to have unicode
metadata values which pdfrw does not yet support (See
https://github.com/pmaupin/pdfrw/issues/39) or if you want the PDF code to be more
human readable.
--first-frame-only
By default, img2pdf will convert multi-frame images like multi-page TIFF or
animated GIF images to one page per frame. This option will only let the first
frame of every multi-frame input image be converted into a page in the resulting
PDF.
--pillow-limit-break
img2pdf uses the Python Imaging Library Pillow to read input images. Pillow limits
the maximum input image size to 89478485 pixels to prevent decompression bomb
denial of service attacks. If your input image contains more pixels than that, use
this option to disable this safety measure during this run of img2pdf
Image and page size and layout arguments:
Every input image will be placed on its own page. The image size is controlled by
the dpi value of the input image or, if unset or missing, the default dpi of 96.00.
By default, each page will have the same size as the image it shows. Thus, there
will be no visible border between the image and the page border by default. If
image size and page size are made different from each other by the options in this
section, the image will always be centered in both dimensions.
The image size and page size can be explicitly set using the --imgsize and
--pagesize options, respectively. If either dimension of the image size is
specified but the same dimension of the page size is not, then the latter will be
derived from the former using an optional minimal distance between the image and
the page border (given by the --border option) and/or a certain fitting strategy
(given by the --fit option). The converse happens if a dimension of the page size
is set but the same dimension of the image size is not.
Any length value in below options is represented by the meta variable L which is a
floating point value with an optional unit appended (without a space between them).
The default unit is pt (1/72 inch, the PDF unit) and other allowed units are cm
(centimeter), mm (millimeter), and in (inch).
Any size argument of the format LxL in the options below specifies the width and
height of a rectangle where the first L represents the width and the second L
represents the height with an optional unit following each value as described
above. Either width or height may be omitted. If the height is omitted, the
separating x can be omitted as well. Omitting the width requires to prefix the
height with the separating x. The missing dimension will be chosen so to not change
the image aspect ratio. Instead of giving the width and height explicitly, you may
also specify some (case-insensitive) common page sizes such as letter and A4. See
the epilogue at the bottom for a complete list of the valid sizes.
The --fit option scales to fit the image into a rectangle that is either derived
from the --imgsize option or otherwise from the --pagesize option. If the --border
option is given in addition to the --imgsize option while the --pagesize option is
not given, then the page size will be calculated from the image size, respecting
the border setting. If the --border option is given in addition to the --pagesize
option while the --imgsize option is not given, then the image size will be
calculated from the page size, respecting the border setting. If the --border
option is given while both the --pagesize and --imgsize options are passed, then
the --border option will be ignored.
-S LxL, --pagesize LxL
Sets the size of the PDF pages. The short-option is the upper case S because it is
an mnemonic for being bigger than the image size.
-s LxL, --imgsize LxL
Sets the size of the images on the PDF pages. In addition, the unit dpi is allowed
which will set the image size as a value of dots per inch. Instead of a unit, width
and height values may also have a percentage sign appended, indicating a resize of
the image by that percentage. The short-option is the lower case s because it is an
mnemonic for being smaller than the page size.
-b L[:L], --border L[:L]
Specifies the minimal distance between the image border and the PDF page border.
This value Is overwritten by explicit values set by --pagesize or --imgsize. The
value will be used when calculating page dimensions from the image dimensions or
the other way round. One, or two length values can be given as an argument,
separated by a colon. One value specifies the minimal border on all four sides. Two
values specify the minimal border on the top/bottom and left/right, respectively.
It is not possible to specify asymmetric borders because images will always be
centered on the page.
-f FIT, --fit FIT
If --imgsize is given, fits the image using these dimensions. Otherwise, fit the
image into the dimensions given by --pagesize. FIT is one of into, fill, exact,
shrink and enlarge. The default value is "into". See the epilogue at the bottom for
a description of the FIT options.
-a, --auto-orient
If both dimensions of the page are given via --pagesize, conditionally swaps these
dimensions such that the page orientation is the same as the orientation of the
input image. If the orientation of a page gets flipped, then so do the values set
via the --border option.
Arguments setting metadata:
Options handling embedded timestamps, title and author information.
--title title
Sets the title metadata value
--author author
Sets the author metadata value
--creator creator
Sets the creator metadata value
--producer producer
Sets the producer metadata value (default is: img2pdf 0.3.3)
--creationdate creationdate
Sets the UTC creation date metadata value in YYYY-MMDD or YYYY-MM-DDTHH:MM or
YYYY-MM-DDTHH:MM:SS format or any format understood by python dateutil module or
any format understood by `date --date`
--moddate moddate
Sets the UTC modification date metadata value in YYYYMM-DD or YYYY-MM-DDTHH:MM or
YYYY-MM-DDTHH:MM:SS format or any format understood by python dateutil module or
any format understood by `date --date`
--subject subject
Sets the subject metadata value
--keywords kw [kw ...]
Sets the keywords metadata value (can be given multiple times)
PDF viewer arguments:
PDF files can specify how they are meant to be presented to the user by a PDF
viewer
--viewer-panes PANES
Instruct the PDF viewer which side panes to show. Valid values are "outlines" and
"thumbs". It is not possible to specify both at the same time.
--viewer-initial-page NUM
Instead of showing the first page, instruct the PDF viewer to show the given page
instead. Page numbers start with 1.
--viewer-magnification MAG
Instruct the PDF viewer to open the PDF with a certain zoom level. Valid values are
either a floating point number giving the exact zoom level, "fit" (zoom to fit
whole page), "fith" (zoom to fit page width) and "fitbh" (zoom to fit visible page
width).
--viewer-page-layout LAYOUT
Instruct the PDF viewer how to arrange the pages on the screen. Valid values are
"single" (display single pages), "onecolumn" (one continuous column),
"twocolumnright" (two continuous columns with odd number pages on the right) and
"twocolumnleft" (two continuous columns with odd numbered pages on the left)
--viewer-fit-window
Instruct the PDF viewer to resize the window to fit the page size
--viewer-center-window
Instruct the PDF viewer to center the PDF viewer window
--viewer-fullscreen
Instruct the PDF viewer to open the PDF in fullscreen mode
Colorspace:
Currently, the colorspace must be forced for JPEG 2000 images that are not in the
RGB colorspace. Available colorspace options are based on Python Imaging Library
(PIL) short handles.
RGB RGB color
L Grayscale
1 Black and white (internally converted to grayscale)
CMYK CMYK color
CMYK;I CMYK color with inversion (for CMYK JPEG files from Adobe)
Paper sizes:
You can specify the short hand paper size names shown in the first column in the
table below as arguments to the --pagesize and --imgsize options. The width and
height they are mapping to is shown in the second column. Giving the value in the
second column has the same effect as giving the short hand in the first column.
Appending ^T (a caret/circumflex followed by the letter T) turns the paper size
from portrait into landscape. The postfix thus symbolizes the transpose. The values
are case insensitive.
A0 841mmx1189mm
A1 594mmx841mm
A2 420mmx594mm
A3 297mmx420mm
A4 210mmx297mm
A5 148mmx210mm
A6 105mmx148mm
Legal 8.5inx14in
Letter 8.5inx11in
Tabloid
11inx17in
Fit options:
The img2pdf options for the --fit argument are shown in the first column in the
table below. The function of these options can be mapped to the geometry operators
of imagemagick. For users who are familiar with imagemagick, the corresponding
operator is shown in the second column. The third column shows whether or not the
aspect ratio is preserved for that option (same as in imagemagick). Just like
imagemagick, img2pdf tries hard to preserve the aspect ratio, so if the --fit
argument is not given, then the default is "into" which corresponds to the absence
of any operator in imagemagick. The value of the --fit option is case insensitive.
into | | Y | The default. Width and height values specify maximum | | | values.
---------+---+---+----------------------------------------------------------
fill | ^ | Y | Width and height values specify the minimum values.
---------+---+---+----------------------------------------------------------
exact | ! | N | Width and height emphatically given.
---------+---+---+----------------------------------------------------------
shrink
| > | Y | Shrinks an image with dimensions larger than the given | | | ones
(and otherwise behaves like "into").
---------+---+---+----------------------------------------------------------
enlarge | < | Y | Enlarges an image with dimensions smaller than the given
| | | ones (and otherwise behaves like "into").
Argument parsing:
Argument long options can be abbreviated to a prefix if the abbreviation is
unambiguous. That is, the prefix must match a unique option.
Beware of your shell interpreting argument values as special characters (like the
semicolon in the CMYK;I colorspace option). If in doubt, put the argument values in
single quotes.
If you want an argument value to start with one or more minus characters, you must
use the long option name and join them with an equal sign like so:
$ img2pdf --author=--test--
If your input file name starts with one or more minus characters, either separate
the input files from the other arguments by two minus signs:
$ img2pdf -- --my-file-starts-with-two-minuses.jpg
Or be more explicit about its relative path by prepending a ./:
$ img2pdf ./--my-file-starts-with-two-minuses.jpg
The order of non-positional arguments (all arguments other than the input images)
does not matter.
EXAMPLES
Lines starting with a dollar sign denote commands you can enter into your terminal.
The dollar sign signifies your command prompt. It is not part of the command you
type.
Convert two scans in JPEG format to a PDF document.
$ img2pdf --output out.pdf page1.jpg page2.jpg
Convert a directory of JPEG images into a PDF with printable A4 pages in landscape
mode. On each page, the photo takes the maximum amount of space while preserving
its aspect ratio and a print border of 2 cm on the top and bottom and 2.5 cm on the
left and right hand side.
$ img2pdf --output out.pdf --pagesize A4^T --border 2cm:2.5cm *.jpg
On each A4 page, fit images into a 10 cm times 15 cm rectangle but keep the
original image size if the image is smaller than that.
$ img2pdf --output out.pdf -S A4 --imgsize 10cmx15cm --fit shrink *.jpg
Prepare a directory of photos to be printed borderless on photo paper with a 3:2
aspect ratio and rotate each page so that its orientation is the same as the input
image.
$ img2pdf --output out.pdf --pagesize 15cmx10cm --auto-orient *.jpg
Encode a grayscale JPEG2000 image. The colorspace has to be forced as img2pdf
cannot read it from the JPEG2000 file automatically.
$ img2pdf --output out.pdf --colorspace L input.jp2
AUTHOR
Written by Johannes 'josch' Schauer <josch@mister-muffin.de>
REPORTING BUGS
Report bugs at https://gitlab.mister-muffin.de/josch/img2pdf/issues