Provided by: texlive-base_2019.20200218-1_all 
NAME
install-tl - TeX Live cross-platform installer
SYNOPSIS
install-tl [option]...
install-tl-windows.bat [option]...
install-tl-advanced.bat [option]...
DESCRIPTION
This installer creates a runnable TeX Live installation from various media, including over
the network, from local hard disk, a DVD, etc. The installer works on all platforms
supported by TeX Live. For information on initially downloading TeX Live, see
<https://tug.org/texlive/acquire.html>.
The basic idea of TeX Live installation is for you to choose one of the top-level schemes,
each of which is defined as a different set of collections and packages, where a
collection is a set of packages, and a package is what contains actual files.
Within the installer, you can choose a scheme, and further customize the set of
collections to install, but not the set of the packages. To work at the package level,
use "tlmgr" (reference just below) after the initial installation is complete.
The default is "scheme-full", which installs everything, and this is highly recommended.
REFERENCES
Post-installation configuration, package updates, and more, are handled through tlmgr(1),
the TeX Live Manager (<https://tug.org/texlive/tlmgr.html>).
The most up-to-date version of this installer documentation is on the Internet at
<https://tug.org/texlive/doc/install-tl.html>.
For the full documentation of TeX Live, see <https://tug.org/texlive/doc>.
OPTIONS
As usual, all options can be specified in any order, and with either a leading "-" or
"--". An argument value can be separated from its option by either a space or "=".
-gui [[=]module]
If no module is given, starts the Tcl/Tk (see below) GUI installer.
If module is given loads the given installer module. Currently the following modules
are supported:
"text"
The text mode user interface (default on Unix systems). Same as the "-no-gui"
option.
"tcl"
The Tcl/Tk user interface (default on Macs and Windows). It starts with a small
number of configuration options, roughly equivalent to what the wizard option
below offers, but a button "Advanced" takes you to a screen with roughly the same
options as the "perltk" interface.
"wizard"
The wizard mode user interface, asking only minimal questions before installing
all of TeX Live.
"expert"
A generic name for, currently, "perltk"; it may select a different GUI in the
future.
"perltk"
The expert GUI installer, providing access to more options.
The "perltk" and "wizard" modules require the Perl/Tk module
(<https://tug.org/texlive/distro.html#perltk>). if Perl/Tk is not available,
installation continues in text mode, except on Windows, where all gui options except
"text" are diverted to the default "tcl" GUI.
The "tcl" GUI requires Tcl/Tk. This is standard on Macs and is often already installed
on GNU/Linux. For Windows, TeX Live provides a Tcl/Tk runtime.
-no-gui
Use the text mode installer (default except on Windows and Macs).
-lang llcode
By default, the GUI tries to deduce your language from the environment. The Tcl GUI
uses the language detection built into Tcl/Tk; the Perl/Tk GUIs use the "LC_MESSAGES"
environment variable. If that fails you can select a different language by giving this
option with a language code (based on ISO 639-1). Currently supported (but not
necessarily completely translated) are: English (en, default), Czech (cs), German
(de), French (fr), Italian (it), Japanese (ja), Dutch (nl), Polish (pl), Brazilian
Portuguese (pt_BR), Russian (ru), Slovak (sk), Slovenian (sl), Serbian (sr), Ukrainian
(uk), Vietnamese (vi), simplified Chinese (zh_CN), and traditional Chinese (zh_TW).
-repository url|path
Specify the package repository to be used as the source of the installation. In short,
this can be a directory name or a url using http(s), ftp, or scp. The documentation
for "tlmgr" has the details (<https://tug.org/texlive/doc/tlmgr.html#OPTIONS>).
For installation, the default is to pick a mirror automatically, using
<http://mirror.ctan.org/systems/texlive/tlnet>; the chosen mirror is used for the
entire download. You can use the special argument "ctan" as an abbreviation for this.
(See <https://ctan.org> for more about CTAN and its mirrors.)
After installation is complete, you can use that installation as the repository for
another installation. If you chose to install less than the full scheme containing
all packages, the list of available schemes will be adjusted accordingly.
-select-repository
This option allows you to choose a particular mirror from the current list of active
CTAN mirrors. This option is supported in the "text", "wizard" and "perltk" installer
modes, and will also offer to install from local media if available, or from a
repository specified on the command line. It's useful when the (default) automatic
redirection does not choose a good host for you.
-all-options
Normally options not relevant to the current platform are not shown (e.g., when
running on Unix, Windows-specific options are omitted). Giving this command line
option allows configuring such "foreign" settings.
-custom-bin path
If you have built your own set of TeX Live binaries (perhaps because your platform was
not supported by TeX Live out of the box), this option allows you to specify the path
to a directory where the binaries for the current system are present. The
installation will continue as usual, but at the end all files from path are copied
over to "bin/custom/" under your installation directory and this "bin/custom/"
directory is what will be added to the path for the post-install actions. To install
multiple custom binary sets, manually rename "custom" before doing each.
For more information on custom binaries, see
<https://tug.org/texlive/custom-bin.html>. For general information on building TeX
Live, see <https://tug.org/texlive/build.html>.
-debug-translation
In the Perl/Tk GUI modes, this option reports any missing, or more likely
untranslated, messages to standard error. Helpful for translators to see what remains
to be done.
-force-platform platform
Instead of auto-detecting the current platform, use platform. Binaries for this
platform must be present and they must actually be runnable, or installation will
fail. "-force-arch" is a synonym.
-help, --help, -?
Display this help and exit. (This help is also on the web at
<https://tug.org/texlive/doc/install-tl.html>). Sometimes the "perldoc" and/or "PAGER"
programs on the system have problems, possibly resulting in control characters being
literally output. This can't always be detected, but you can set the "NOPERLDOC"
environment variable and "perldoc" will not be used.
-in-place
This is a quick-and-dirty installation option in case you already have an rsync or svn
checkout of TeX Live. It will use the checkout as-is and will just do the necessary
post-install. Be warned that the file "tlpkg/texlive.tlpdb" may be rewritten, that
removal has to be done manually, and that the only realistic way to maintain this
installation is to redo it from time to time. This option is not available via the
installer interfaces. USE AT YOUR OWN RISK.
-init-from-profile profile_file
Similar to -profile (see "PROFILES" below), but only initializes the installation
configuration from profile_file and then starts a normal interactive session.
Environment variables are not ignored.
-logfile file
Write both all messages (informational, debugging, warnings) to file, in addition to
standard output or standard error.
If this option is not given, the installer will create a log file in the root of the
writable installation tree, for example, "/usr/local/texlive/YYYY/install-tl.log" for
the YYYY release.
-no-cls
For the text mode installer only: do not clear the screen when entering a new menu
(for debugging purposes).
-no-persistent-downloads
-persistent-downloads
For network installs, activating this option makes the installer try to set up a
persistent connection using the "Net::LWP" Perl module. This opens only one
connection between your computer and the server per session and reuses it, instead of
initiating a new download for each package, which typically yields a significant
speed-up.
This option is turned on by default, and the installation program will fall back to
using "wget" if this is not possible. To disable usage of LWP and persistent
connections, use "-no-persistent-downloads".
-no-verify-downloads
By default, if a GnuPG "gpg" binary is found in PATH, downloads are verified against a
cryptographic signature. This option disables such verification. The full description
is in the Crytographic Verification section of the "tlmgr" documentation, e.g.,
<https://tug.org/texlive/doc/tlmgr.html#CRYPTOGRAPHIC-VERIFICATION>
-non-admin
For Windows only: configure for the current user, not for all users.
-portable
Install for portable use, e.g., on a USB stick. Also selectable from within the
perltk and text installers.
-print-platform
Print the TeX Live identifier for the detected platform (hardware/operating system)
combination to standard output, and exit. "-print-arch" is a synonym.
-profile profile_file
Load profile_file and do the installation with no user interaction, that is, a batch
(unattended) install. Environment variables are ignored. See "PROFILES" below.
-q Omit normal informational messages.
-scheme scheme
Schemes are the highest level of package grouping in TeX Live; the default is to use
the "full" scheme, which includes everything. This option overrides that default.
You can change the scheme again before the actual installation with the usual menu.
The scheme argument may optionally have a prefix "scheme-". The list of supported
scheme names depends on what your package repository provides; see the interactive
menu list.
-v Include verbose debugging messages; repeat for maximum debugging: "-v -v". (Further
repeats are accepted but ignored.)
-version, --version
Output version information and exit. If "-v" is also given, the versions of the TeX
Live modules used are also reported.
PROFILES
A profile file contains all the values needed to perform an installation. After a normal
installation has finished, a profile for that exact installation is written to the file
"tlpkg/texlive.profile". In addition, from the text menu one can select "P" to save the
current setup as a profile at any time.
Such a profile file can be given as the argument to "-profile", for example to redo the
exact same installation on a different system. Alternatively, you can use a custom
profile, most easily created by starting from a generated one and changing values, or an
empty file, which will take all the defaults.
As mentioned above, the installer only supports selection by scheme and collections, not
individual packages, so packages cannot be specified in profile files either. Use "tlmgr"
to work at the package level.
Within a profile file, each line consists of
variable [value]
except for comment lines starting with "#". The possible variable names are listed below.
Values, when present, are either 0 or 1 for booleans, or strings (which must be specified
without any quote characters). Leading whitespace is ignored.
If the variable "selected_scheme" is defined and no collection variables at all are
defined, then the collections required by the specified scheme (which might change over
time) are installed, without explicitly listing them. This eases maintenance of profile
files. If any collections are specified in a profile, though, then all desired
collections must be given explicitly.
For example, a line
selected_scheme scheme-small
along with definitions for the installation directories (given below under "path options")
suffices to install the "small" scheme with all default options. The schemes are
described in the "S" menu in the text installer, or equivalent.
Besides "selected_scheme", here is the list of variable names supported in a profile:
collection options (prefix "collection-")
Collections are specified with a variable name with the prefix "collection-" followed by a
collection name; there is no value. For instance, "collection-basic". The collections
are described in the "C" menu.
Schemes and collections (and packages) are ultimately defined by the files in the
"tlpkg/tlpsrc/" source directory.
path options
It is best to define all of these, even though they may not be used in the installation,
so as to avoid unintentionally getting a default value that could cause problems later.
TEXDIR
TEXMFCONFIG
TEXMFVAR
TEXMFHOME
TEXMFLOCAL
TEXMFSYSCONFIG
TEXMFSYSVAR
installer options (prefix "instopt_")
"instopt_adjustpath" (default 0 on Unix, 1 on Windows)
Adjust "PATH" environment variable.
"instopt_adjustrepo" (default 1)
Set remote repository to a multiplexed CTAN mirror after installation; see
"-repository" above.
"instopt_letter" (default 0)
Set letter size paper as the default, instead of a4.
"instopt_portable" (default 0)
Install for portable use, e.g., on a USB stick.
"instopt_write18_restricted" (default 1)
Enable "\write18" for a restricted set of programs.
tlpdb options (prefix "tlpdbopt_")
The definitive list is given in "tlpkg/TeXLive/TLConfig.pm", in the hash
%TeXLive::TLConfig::TLPDBOptions, together with explanations. All items given there
except for "tlpdbopt_location" can be specified. Here is the current list:
tlpdbopt_autobackup
tlpdbopt_backupdir
tlpdbopt_create_formats
tlpdbopt_desktop_integration
tlpdbopt_file_assocs
tlpdbopt_generate_updmap
tlpdbopt_install_docfiles
tlpdbopt_install_srcfiles
tlpdbopt_post_code
tlpdbopt_sys_bin
tlpdbopt_sys_info
tlpdbopt_sys_man
tlpdbopt_w32_multi_user
platform options (prefix "binary_")
For each supported platform in TeX Live (directories under "bin/"), the variable
"binary_"PLATFORM can be set with value 1. For example:
binary_x86_64-linux 1
If no "binary_" settings are made, the default is whatever the current machine is running.
In releases before 2017, many profile variables had different names (not documented here;
see the "install-tl" source). They are accepted and transformed to the names given above.
When a profile is written, the names above are always used.
For more details on all of the above options, consult the TeX Live installation manual,
linked from <https://tug.org/texlive/doc>.
ENVIRONMENT VARIABLES
For ease in scripting and debugging, "install-tl" looks for the following environment
variables. They are not of interest for normal user installations.
"TEXLIVE_DOWNLOADER"
"TL_DOWNLOAD_PROGRAM"
"TL_DOWNLOAD_ARGS"
These override the normal choice of a download program; see the "tlmgr" documentation,
e.g., <https://tug.org/texlive/doc/tlmgr.html#ENVIRONMENT-VARIABLES>.
"TEXLIVE_INSTALL_ENV_NOCHECK"
Omit the check for environment variables containing the string "tex". People
developing TeX-related software are likely to have many such variables.
"TEXLIVE_INSTALL_NO_CONTEXT_CACHE"
Omit creating the ConTeXt cache. This is useful for redistributors.
"TEXLIVE_INSTALL_NO_IMPORT"
Omit check for installing on top of a previous installation and then asking about
importing previous settings.
"TEXLIVE_INSTALL_NO_WELCOME"
Omit printing the welcome message after successful installation, e.g., when testing.
"TEXLIVE_INSTALL_PREFIX"
"TEXLIVE_INSTALL_TEXDIR"
"TEXLIVE_INSTALL_TEXMFCONFIG"
"TEXLIVE_INSTALL_TEXMFVAR"
"TEXLIVE_INSTALL_TEXMFHOME"
"TEXLIVE_INSTALL_TEXMFLOCAL"
"TEXLIVE_INSTALL_TEXMFSYSCONFIG"
"TEXLIVE_INSTALL_TEXMFSYSVAR"
Specify the respective directories. "TEXLIVE_INSTALL_PREFIX" defaults to
"/usr/local/texlive", while "TEXLIVE_INSTALL_TEXDIR" defaults to the release directory
within that prefix, e.g., "/usr/local/texlive/2016". All the defaults can be seen by
running the installer interactively and then typing "D" for the directory menu.
"NOPERLDOC"
Don't try to run the "--help" message through "perldoc".
AUTHORS AND COPYRIGHT
This script and its documentation were written for the TeX Live distribution
(<https://tug.org/texlive>) and both are licensed under the GNU General Public License
Version 2 or later.
$Id: install-tl 53198 2019-12-20 23:55:46Z karl $