NAME

       ipaccess-config - Tool to configure an ip.access nanoBTS

SYNOPSIS

       ipaccess-config [options] <IP_OF_BTS>

DESCRIPTION

       ipaccess-config is a small command line tool to configure an ip.access nanoBTS.

       You  can  use  this  tool  to perform basic operations such as setting NVRAM parameters or
       performing tests.

       It is part of the OpenBSC base station controller from Osmocom.

OPTIONS

       Commands for writing to the BTS:

              -u --unit-id UNIT_ID
                     Set the Unit ID of the BTS

              -o --oml-ip IP
                     Set primary OML IP (IP of your BSC)

              -i --ip-address IP/MASK
                     Set static IP address + netmask of BTS

              -g --ip-gateway IP
                     Set static IP gateway of BTS

              -r --restart
                     Restart the BTS (after other operations)

              -n --nvram-flags FLAGS/MASK
                     Set NVRAM attributes

              -S --nvattr-set FLAG
                     Set one additional NVRAM attribute

              -U --nvattr-unset FLAG
                     Set one additional NVRAM attribute

              -l --listen TESTNR
                     Perform specified test number

              -L --Listen TEST_NAME
                     Perform specified test

              -s --stream-id ID
                     Set the IPA Stream Identifier for OML

              -d --software FIRMWARE
                     Download firmware into BTS

       Miscellaneous commands:

              -h --help
                     this text

              -H --HELP
                     Print parameter details.

              -f --firmware FIRMWARE
                     Provide firmware information

              -w --write-firmware
                     This will dump the firmware parts to the filesystem. Use with -f.

              -p --loop
                     Loop the tests executed with the --listen command.

SEE ALSO

       ipaccess-find(1)

AUTHOR

       This manual page was written by Ruben Undheim  <ruben.undheim@gmail.com>  for  the  Debian
       project (and may be used by others).

                                         13 November 2018                      IPACCESS-CONFIG(1)