NAME

       ipmctl-show-topology - Shows the topology of the memory installed

SYNOPSIS

       ipmctl show [OPTIONS] -topology [TARGETS]

DESCRIPTION

       Shows the topology of the memory installed in the host server. Use the command
       ipmctl-show-device to view more detailed information about a DCPMM.

OPTIONS

       -a, -all
           Shows all attributes.

       -h, -help
           Displays help for the command.

       -ddrt
           Used to specify DDRT as the desired transport protocol for the current invocation of
           ipmctl.

       -smbus
           Used to specify SMBUS as the desired transport protocol for the current invocation of
           ipmctl.

           Note
           The -ddrt and -smbus options are mutually exclusive and may not be used together.

       -o (text|nvmxml), -output (text|nvmxml)
           Changes the output format. One of: "text" (default) or "nvmxml".

       -u (B|MB|MiB|GB|GiB|TB| TiB), -units (B|MB|MiB|GB|GiB|TB| TiB)
           Changes the units that capacities are displayed in for this command. One of: bytes
           (B), megabytes (MB), mebibytes (MiB), gigabytes (GB), gibibytes (GiB), terabytes (TB)
           or tebibytes (TiB).

TARGETS

       -dimm [DimmIDs]
           Restricts output to specific DIMMs by optionally supplying the DIMM target and one or
           more comma-separated DIMM identifiers. The default is to display all DIMMs.

       -socket [SocketIDs]
           Restricts output to the DIMMs installed on specific sockets by supplying the socket
           target and one or more comma-separated socket identifiers. The default is to display
           all sockets.

           Note
           If ACPI PMTT table is not present, then DDR4 memory will not be displayed in the
           filtered socket list.

EXAMPLES

       Displays the system memory topology.

       ipmctl show -topology

RETURN DATA

       Displays a table with the attributes listed below for each memory DIMM installed in the
       host server.

       MemoryType
           (Default) The DIMM type. One of:

           •   Unknown

           •   DDR4

           •   Logical Non-volatile Device

       Capacity
           (Default) The raw capacity of the DIMM as reported in the SMBIOS Type 17 table.

       DimmID
           (Default) The DIMM identifier. For DRAM DIMMs, the DimmID is "N/A".

       PhysicalID
           (Default) The DIMM physical identifier (i.e., SMBIOS Type 17 handle).

       DeviceLocator
           (Default) The string that identifies the physically-labeled socket or board position
           where the DIMM is located.

       SocketID
           The processor socket identifier (i.e., NUMA node) where the DIMM is installed.

       DieID
           The processor die identifier where the DIMM is installed.

       MemControllerID
           The associated memory controller identifier.

       ChannelID
           The associated channel. For DRAM DIMMs, the channel identifier is "N/A".

       ChannelPos
           The DIMM position in the channel.

       NodeControllerID
           The node controller identifier.

       BankLabel
           The string that identifies the physically-labeled bank where the DIMM is located.