Provided by: binutils-msp430_2.22~msp20120406-5.1_amd64 bug

NAME

       ar - create, modify, and extract from archives

SYNOPSIS

       ar [--plugin name] [-X32_64] [-]p[mod [relpos] [count]] archive [member...]

DESCRIPTION

       The GNU ar program creates, modifies, and extracts from archives.  An archive is a single
       file holding a collection of other files in a structure that makes it possible to retrieve
       the original individual files (called members of the archive).

       The original files' contents, mode (permissions), timestamp, owner, and group are
       preserved in the archive, and can be restored on extraction.

       GNU ar can maintain archives whose members have names of any length; however, depending on
       how ar is configured on your system, a limit on member-name length may be imposed for
       compatibility with archive formats maintained with other tools.  If it exists, the limit
       is often 15 characters (typical of formats related to a.out) or 16 characters (typical of
       formats related to coff).

       ar is considered a binary utility because archives of this sort are most often used as
       libraries holding commonly needed subroutines.

       ar creates an index to the symbols defined in relocatable object modules in the archive
       when you specify the modifier s.  Once created, this index is updated in the archive
       whenever ar makes a change to its contents (save for the q update operation).  An archive
       with such an index speeds up linking to the library, and allows routines in the library to
       call each other without regard to their placement in the archive.

       You may use nm -s or nm --print-armap to list this index table.  If an archive lacks the
       table, another form of ar called ranlib can be used to add just the table.

       GNU ar can optionally create a thin archive, which contains a symbol index and references
       to the original copies of the member files of the archives.  Such an archive is useful for
       building libraries for use within a local build, where the relocatable objects are
       expected to remain available, and copying the contents of each object would only waste
       time and space.  Thin archives are also flattened, so that adding one or more archives to
       a thin archive will add the elements of the nested archive individually.  The paths to the
       elements of the archive are stored relative to the archive itself.

       GNU ar is designed to be compatible with two different facilities.  You can control its
       activity using command-line options, like the different varieties of ar on Unix systems;
       or, if you specify the single command-line option -M, you can control it with a script
       supplied via standard input, like the MRI "librarian" program.

OPTIONS

       GNU ar allows you to mix the operation code p and modifier flags mod in any order, within
       the first command-line argument.

       If you wish, you may begin the first command-line argument with a dash.

       The p keyletter specifies what operation to execute; it may be any of the following, but
       you must specify only one of them:

       d   Delete modules from the archive.  Specify the names of modules to be deleted as
           member...; the archive is untouched if you specify no files to delete.

           If you specify the v modifier, ar lists each module as it is deleted.

       m   Use this operation to move members in an archive.

           The ordering of members in an archive can make a difference in how programs are linked
           using the library, if a symbol is defined in more than one member.

           If no modifiers are used with "m", any members you name in the member arguments are
           moved to the end of the archive; you can use the a, b, or i modifiers to move them to
           a specified place instead.

       p   Print the specified members of the archive, to the standard output file.  If the v
           modifier is specified, show the member name before copying its contents to standard
           output.

           If you specify no member arguments, all the files in the archive are printed.

       q   Quick append; Historically, add the files member... to the end of archive, without
           checking for replacement.

           The modifiers a, b, and i do not affect this operation; new members are always placed
           at the end of the archive.

           The modifier v makes ar list each file as it is appended.

           Since the point of this operation is speed, the archive's symbol table index is not
           updated, even if it already existed; you can use ar s or ranlib explicitly to update
           the symbol table index.

           However, too many different systems assume quick append rebuilds the index, so GNU ar
           implements q as a synonym for r.

       r   Insert the files member... into archive (with replacement). This operation differs
           from q in that any previously existing members are deleted if their names match those
           being added.

           If one of the files named in member... does not exist, ar displays an error message,
           and leaves undisturbed any existing members of the archive matching that name.

           By default, new members are added at the end of the file; but you may use one of the
           modifiers a, b, or i to request placement relative to some existing member.

           The modifier v used with this operation elicits a line of output for each file
           inserted, along with one of the letters a or r to indicate whether the file was
           appended (no old member deleted) or replaced.

       s   Add an index to the archive, or update it if it already exists.  Note this command is
           an exception to the rule that there can only be one command letter, as it is possible
           to use it as either a command or a modifier.  In either case it does the same thing.

       t   Display a table listing the contents of archive, or those of the files listed in
           member... that are present in the archive.  Normally only the member name is shown; if
           you also want to see the modes (permissions), timestamp, owner, group, and size, you
           can request that by also specifying the v modifier.

           If you do not specify a member, all files in the archive are listed.

           If there is more than one file with the same name (say, fie) in an archive (say b.a),
           ar t b.a fie lists only the first instance; to see them all, you must ask for a
           complete listing---in our example, ar t b.a.

       x   Extract members (named member) from the archive.  You can use the v modifier with this
           operation, to request that ar list each name as it extracts it.

           If you do not specify a member, all files in the archive are extracted.

           Files cannot be extracted from a thin archive.

       A number of modifiers (mod) may immediately follow the p keyletter, to specify variations
       on an operation's behavior:

       a   Add new files after an existing member of the archive.  If you use the modifier a, the
           name of an existing archive member must be present as the relpos argument, before the
           archive specification.

       b   Add new files before an existing member of the archive.  If you use the modifier b,
           the name of an existing archive member must be present as the relpos argument, before
           the archive specification.  (same as i).

       c   Create the archive.  The specified archive is always created if it did not exist, when
           you request an update.  But a warning is issued unless you specify in advance that you
           expect to create it, by using this modifier.

       D   Operate in deterministic mode.  When adding files and the archive index use zero for
           UIDs, GIDs, timestamps, and use consistent file modes for all files.  When this option
           is used, if ar is used with identical options and identical input files, multiple runs
           will create identical output files regardless of the input files' owners, groups, file
           modes, or modification times.

       f   Truncate names in the archive.  GNU ar will normally permit file names of any length.
           This will cause it to create archives which are not compatible with the native ar
           program on some systems.  If this is a concern, the f modifier may be used to truncate
           file names when putting them in the archive.

       i   Insert new files before an existing member of the archive.  If you use the modifier i,
           the name of an existing archive member must be present as the relpos argument, before
           the archive specification.  (same as b).

       l   This modifier is accepted but not used.

       N   Uses the count parameter.  This is used if there are multiple entries in the archive
           with the same name.  Extract or delete instance count of the given name from the
           archive.

       o   Preserve the original dates of members when extracting them.  If you do not specify
           this modifier, files extracted from the archive are stamped with the time of
           extraction.

       P   Use the full path name when matching names in the archive.  GNU ar can not create an
           archive with a full path name (such archives are not POSIX complaint), but other
           archive creators can.  This option will cause GNU ar to match file names using a
           complete path name, which can be convenient when extracting a single file from an
           archive created by another tool.

       s   Write an object-file index into the archive, or update an existing one, even if no
           other change is made to the archive.  You may use this modifier flag either with any
           operation, or alone.  Running ar s on an archive is equivalent to running ranlib on
           it.

       S   Do not generate an archive symbol table.  This can speed up building a large library
           in several steps.  The resulting archive can not be used with the linker.  In order to
           build a symbol table, you must omit the S modifier on the last execution of ar, or you
           must run ranlib on the archive.

       T   Make the specified archive a thin archive.  If it already exists and is a regular
           archive, the existing members must be present in the same directory as archive.

       u   Normally, ar r... inserts all files listed into the archive.  If you would like to
           insert only those of the files you list that are newer than existing members of the
           same names, use this modifier.  The u modifier is allowed only for the operation r
           (replace).  In particular, the combination qu is not allowed, since checking the
           timestamps would lose any speed advantage from the operation q.

       v   This modifier requests the verbose version of an operation.  Many operations display
           additional information, such as filenames processed, when the modifier v is appended.

       V   This modifier shows the version number of ar.

       ar ignores an initial option spelt -X32_64, for compatibility with AIX.  The behaviour
       produced by this option is the default for GNU ar.  ar does not support any of the other
       -X options; in particular, it does not support -X32 which is the default for AIX ar.

       The optional command line switch --plugin name causes ar to load the plugin called name
       which adds support for more file formats.  This option is only available if the toolchain
       has been built with plugin support enabled.

       @file
           Read command-line options from file.  The options read are inserted in place of the
           original @file option.  If file does not exist, or cannot be read, then the option
           will be treated literally, and not removed.

           Options in file are separated by whitespace.  A whitespace character may be included
           in an option by surrounding the entire option in either single or double quotes.  Any
           character (including a backslash) may be included by prefixing the character to be
           included with a backslash.  The file may itself contain additional @file options; any
           such options will be processed recursively.

SEE ALSO

       nm(1), ranlib(1), and the Info entries for binutils.

COPYRIGHT

       Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
       2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

       Permission is granted to copy, distribute and/or modify this document under the terms of
       the GNU Free Documentation License, Version 1.3 or any later version published by the Free
       Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no
       Back-Cover Texts.  A copy of the license is included in the section entitled "GNU Free
       Documentation License".