Ubuntu Manpage: mysqlrplshow - Show Slaves for Master Server

Provided by: mysql-utilities_1.6.4-1build1_all

NAME

       mysqlrplshow - Show Slaves for Master Server

SYNOPSIS

       mysqlrplshow [options]

DESCRIPTION

This utility shows the replication slaves for a master. It prints a graph of the master
and the slaves connected labeling each with the host name and port number.

You must specify the --discover-slaves-login option to provide the user name and password
to discover any slaves in the topology.

To explore the slaves for each client, use the --recurse option. This causes the utility
to connect to each slave found and attempt to determine whether it has any slaves. If
slaves are found, the process continues until the slave is found in the list of servers
serving as masters (a circular topology). The graph displays the topology with successive
indents. A notation is made for circular topologies.

If you use the --recurse option, the utility attempts to connect to the slaves using the
user name and password provided for the master. By default, if the connection attempt
fails, the utility throws an error and stops. To change this behavior, use the --prompt
option, which permits the utility to prompt for the user name and password for each slave
that fails to connect. You can also use the --num-retries=n option to reattempt a failed
connection 'n' times before the utility fails.

An example graph for a typical topology with relay slaves is shown here:

# Replication Topology Graph::
localhost:3311 (MASTER)
|
+--- localhost:3310 - (SLAVE)
|
+--- localhost:3312 - (SLAVE + MASTER)
|
+--- localhost:3313 - (SLAVE)

MASTER, SLAVE, and SLAVE+MASTER indicate that a server is a master only, slave only, and
both slave and master, respectively.

A circular replication topology is shown like this, where <--> indicates circularity:

# Replication Topology Graph
localhost:3311 (MASTER)
|
+--- localhost:3312 - (SLAVE + MASTER)
|
+--- localhost:3313 - (SLAVE + MASTER)
|
+--- localhost:3311 <--> (SLAVE)

To produce a column list in addition to the graph, specify the --show-list option. In this
case, to specify how to display the list, use one of the following values with the
--format option:

· grid (default)

Display output in grid or table format like that of the mysql client command-line
tool.

· csv

Display output in comma-separated values format.

· tab

Display output in tab-separated format.

· vertical

Display output in single-column format like that of the \G command for the mysql
client command-line tool.

The utility uses of the SHOW SLAVE HOSTS statement to determine which slaves the master
has. If you want to use the --recurse option, slaves should have been started with the
--report-host and --report-port options set to their actual host name and port number or
the utility may not be able to connect to the slaves to determine their own slaves.
OPTIONS.PP mysqlrplshow accepts the following command-line options:

· --help

Display a help message and exit.

· --license

Display license information and exit.

· --discover-slaves-login=<slave-login>

Supply the user and password in the form <user>[:<passwd>] or <login-path> for
discovering slaves and relay slaves in the topology. For example,
--discover=joe:secret will use 'joe' as the user and 'secret' as the password for each
discovered slave.

· --format=<format>, -f<format>

Specify the display format for column list output. Permitted format values are grid,
csv, tab, and vertical. The default is grid. This option applies only if --show-list
is given.

· --master=<source>

Connection information for the master server.

To connect to a server, it is necessary to specify connection parameters such as the
user name, host name, password, and either a port or socket. MySQL Utilities provides
a number of ways to supply this information. All of the methods require specifying
your choice via a command-line option such as --server, --master, --slave, etc. The
methods include the following in order of most secure to least secure.

· Use login-paths from your .mylogin.cnf file (encrypted, not visible). Example :
<login-path>[:<port>][:<socket>]

· Use a configuration file (unencrypted, not visible) Note: available in
release-1.5.0. Example : <configuration-file-path>[:<section>]

· Specify the data on the command-line (unencrypted, visible). Example :
<user>[:<passwd>]@<host>[:<port>][:<socket>]

· --max-depth=<N>

The maximum recursion depth. This option is valid only if --recurse is given.

· --num-retries=<num_retries>, -n<num_retries>

The number of retries permitted for failed slave login attempts. This option is valid
only if --prompt is given.

· --prompt, -p

Prompt for the slave user and password if different from the master user and password.

If you give this option, the utility sets --num-retries to 1 if that option is not set
explicitly. This ensures at least one attempt to retry and prompt for the user name
and password should a connection fail.

· --quiet, -q

Turn off all messages for quiet execution. This option does not suppress errors or
warnings.

· --recurse, -r

Traverse the list of slaves to find additional master/slave connections. User this
option to map a replication topology.

· --show-list, -l

Display a column list of the topology.

· --ssl-ca

The path to a file that contains a list of trusted SSL CAs.

· --ssl-cert

The name of the SSL certificate file to use for establishing a secure connection.

· --ssl-cert

The name of the SSL key file to use for establishing a secure connection.

· --ssl

Specifies if the server connection requires use of SSL. If an encrypted connection
cannot be established, the connection attempt fails. Default setting is 0 (SSL not
required).

· --verbose, -v

Specify how much information to display. If this option is used, the IO thread status
of each slave is also displayed. Use this option multiple times to increase the amount
of information. For example, -v = verbose, -vv = more verbose, -vvv = debug. If you
use -vvv, the output will contain the state of the IO and SQL threads for each slave.

· --version

Display version information and exit.
NOTES.PP The login user must have the REPLICATE SLAVE and REPLICATE CLIENT privileges to
successfully execute this utility. Specifically, the login user must have appropriate
permissions to execute SHOW SLAVE STATUS, SHOW MASTER STATUS, and SHOW SLAVE HOSTS.

For the --format option, the permitted values are not case sensitive. In addition, values
may be specified as any unambiguous prefix of a valid value. For example, --format=g
specifies the grid format. An error occurs if a prefix matches more than one valid value.

Mixing IP and hostnames is not recommended. The replication-specific utilities will
attempt to compare hostnames and IP addresses as aliases for checking slave connectivity
to the master. However, if your installation does not support reverse name lookup, the
comparison could fail. Without the ability to do a reverse name lookup, the replication
utilities could report a false negative that the slave is (not) connected to the master.

For example, if you setup replication using MASTER_HOST=ubuntu.net on the slave and later
connect to the slave with mysqlrplcheck and have the master specified as
--master=192.168.0.6 using the valid IP address for ubuntu.net, you must have the ability
to do a reverse name lookup to compare the IP (192.168.0.6) and the hostname (ubuntu.net)
to determine if they are the same machine.

The path to the MySQL client tools should be included in the PATH environment variable in
order to use the authentication mechanism with login-paths. This will allow the utility to
use the my_print_defaults tools which is required to read the login-path values from the
login configuration file (.mylogin.cnf). EXAMPLES.PP To show the slaves for a master
running on port 3311 on the local host, use the following command:

shell> mysqlrplshow --master=root@localhost:3311 --discover-slaves-login=root
# master on localhost: ... connected.
# Finding slaves for master: localhost:3311
# Replication Topology Graph
localhost:3311 (MASTER)
|
+--- localhost:3310 - (SLAVE)
|
+--- localhost:3312 - (SLAVE)

As shown in the example, you must provide valid login information for the master.

To show additional information about the IO thread status (to confirm if the slaves are
really connected to the master) use the option --verbose:

shell> mysqlrplshow --master=root@localhost:3311 --discover-slaves-login=root --verbose
# master on localhost: ... connected.
# Finding slaves for master: localhost:3311
# Replication Topology Graph
localhost:3311 (MASTER)
|
+--- localhost:3310 [IO: Yes, SQL: Yes] - (SLAVE)
|
+--- localhost:3312 [IO: Yes, SQL: Yes] - (SLAVE)

To show the full replication topology of a master running on the local host, use the
following command:

shell> mysqlrplshow --master=root@localhost:3311 --recurse --discover-slaves-login=root
# master on localhost: ... connected.
# Finding slaves for master: localhost:3311
# Replication Topology Graph
localhost:3311 (MASTER)
|
+--- localhost:3310 - (SLAVE)
|
+--- localhost:3312 - (SLAVE + MASTER)
|
+--- localhost:3313 - (SLAVE)

To show the full replication topology of a master running on the local host, prompting for
the user name and password for slaves that do not have the same user name and password
credentials as the master, use the following command:

shell> mysqlrplshow --recurse --prompt --num-retries=1 \
--master=root@localhost:3331 --discover-slaves-login=root
Server localhost:3331 is running on localhost.
# master on localhost: ... connected.
# Finding slaves for master: localhost:3331
Server localhost:3332 is running on localhost.
# master on localhost: ... FAILED.
Connection to localhost:3332 has failed.
Please enter the following information to connect to this server.
User name: root
Password:
# master on localhost: ... connected.
# Finding slaves for master: localhost:3332
Server localhost:3333 is running on localhost.
# master on localhost: ... FAILED.
Connection to localhost:3333 has failed.
Please enter the following information to connect to this server.
User name: root
Password:
# master on localhost: ... connected.
# Finding slaves for master: localhost:3333
Server localhost:3334 is running on localhost.
# master on localhost: ... FAILED.
Connection to localhost:3334 has failed.
Please enter the following information to connect to this server.
User name: root
Password:
# master on localhost: ... connected.
# Finding slaves for master: localhost:3334
# Replication Topology Graph
localhost:3331 (MASTER)
|
+--- localhost:3332 - (SLAVE)
|
+--- localhost:3333 - (SLAVE + MASTER)
|
+--- localhost:3334 - (SLAVE)

PERMISSIONS REQUIRED.PP The user connected to the master must have the REPLICATION SLAVE
privilege.

The user specified with the --discover-slaves-login option that logs into each slave must
have the REPLICATION CLIENT privilege.

COPYRIGHT

       Copyright © 2006, 2016, Oracle and/or its affiliates. All rights reserved.

       This documentation is free software; you can redistribute it and/or modify it only under
       the terms of the GNU General Public License as published by the Free Software Foundation;
       version 2 of the License.

       This documentation is distributed in the hope that it will be useful, but WITHOUT ANY
       WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
       PURPOSE. See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with the program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
       Boston, MA 02110-1301 USA or see http://www.gnu.org/licenses/.

AUTHOR

       Oracle Corporation (http://dev.mysql.com/).

NAME

SYNOPSIS

DESCRIPTION

COPYRIGHT

SEE ALSO

AUTHOR