Provided by: sumo_1.4.0+dfsg1-1_amd64 
NAME
Eclipse - Road network editor for the road traffic simulation SUMO
SYNOPSIS
netedit [OPTION]*
DESCRIPTION
Eclipse SUMO netedit Version 1.4.0
Copyright (C) 2001-2019 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Graphical editor for SUMO networks.
Configuration Options:
-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
Input Options:
--new Start with a new network
-s, --sumo-net-file FILE
Read SUMO-net from FILE
-n, --node-files FILE
Read XML-node defs from FILE
-e, --edge-files FILE
Read XML-edge defs from FILE
-x, --connection-files FILE
Read XML-connection defs from FILE
-i, --tllogic-files FILE
Read XML-traffic light defs from FILE
-t, --type-files FILE
Read XML-type defs from FILE
--shapefile-prefix FILE
Read shapefiles (ArcView, Tiger, ...) from files starting with 'FILE'
--dlr-navteq-prefix FILE
Read converted Navteq GDF data (unsplitted Elmar-network) from path 'FILE'
--osm-files FILE
Read OSM-network from path 'FILE(s)'
--opendrive-files FILE
Read OpenDRIVE-network from FILE
--visum-file FILE
Read VISUM-net from FILE
--vissim-file FILE
Read VISSIM-net from FILE
--robocup-dir FILE
Read RoboCup-net from DIR
--matsim-files FILE
Read MATsim-net from FILE
--itsumo-files FILE
Read ITSUMO-net from FILE
--heightmap.shapefiles FILE
Read heightmap from ArcGIS shapefile
--heightmap.geotiff FILE
Read heightmap from GeoTIFF
Output Options:
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced
by the current time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rathern than
seconds
-o, --output-file FILE
The generated net will be written to FILE
--plain-output-prefix FILE
Prefix of files to write plain xml nodes, edges and connections to
--junctions.join-output FILE
Writes information about joined junctions to FILE (can be loaded as additional
node-file to reproduce joins
--prefix STR
Defines a prefix for edge and junction names
--amitran-output FILE
The generated net will be written to FILE using Amitran format
--matsim-output FILE
The generated net will be written to FILE using MATsim format
--opendrive-output FILE
The generated net will be written to FILE using OpenDRIVE format
--dlr-navteq-output FILE
The generated net will be written to dlr-navteq files with the given PREFIX
--dlr-navteq.precision INT
The network coordinates are written with the specified level of output precision
--output.street-names
Street names will be included in the output (if available)
--output.original-names
Writes original names, if given, as parameter
--street-sign-output FILE
Writes street signs as POIs to FILE
--ptstop-output FILE
Writes public transport stops to FILE
--ptline-output FILE
Writes public transport lines to FILE
--ptline-clean-up
Clean-up pt stops that are not served by any line
--parking-output FILE
Writes parking areas to FILE
--railway.topology.output FILE
Analyse topology of the railway network
--polygon-output FILE
Write shapes that are embedded in the network input and that are not supported by
polyconvert (OpenDRIVE)
--opendrive-output.straight-threshold FLOAT
Builds parameterized curves whenever the angular change between straight segments
exceeds FLOAT degrees
Projection Options:
--simple-projection
Uses a simple method for projection
--proj.scale FLOAT
Scaling factor for input coordinates
--proj.rotate FLOAT
Rotation (clockwise degrees) for input coordinates
Processing Options:
--default.action-step-length FLOAT
Length of the default interval length between action points for the car-following
and lane-change models (in seconds). If not specified, the simulation step-length
is used per default. Vehicle- or VType-specific settings override the default. Must
be a multiple of the simulation step-length.
--speed-in-kmh
vmax is parsed as given in km/h (some)
--construction-date STR
Use YYYY-MM-DD date to determine the readiness of features under construction
--flatten
Remove all z-data
--plain.extend-edge-shape
If edge shapes do not end at the node positions, extend them
--numerical-ids
Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers
--reserved-ids FILE
Ensures that generated ids do not included any of the typed IDs from FILE (SUMO-GUI
selection file format)
--dismiss-vclasses
Removes vehicle class restrictions from imported edges
--geometry.split
Splits edges across geometry nodes
-R, --geometry.remove
Replace nodes which only define edge geometry by geometry points (joins edges)
--geometry.remove.keep-edges.explicit STR[]
Ensure that the given list of edges is not modified
--geometry.remove.keep-edges.input-file FILE
Ensure that the edges in FILE are not modified (Each id on a single line. Selection
files from SUMO-GUI are also supported)
--geometry.remove.min-length FLOAT
Allow merging edges with differing attributes when their length is below min-length
--geometry.remove.width-tolerance FLOAT
Allow merging edges with differing lane widths if the difference is below FLOAT
--geometry.max-segment-length FLOAT
splits geometry to restrict segment length
--geometry.min-dist FLOAT
reduces too similar geometry points
--geometry.max-angle FLOAT
Warn about edge geometries with an angle above DEGREES in successive segments
--geometry.min-radius FLOAT
Warn about edge geometries with a turning radius less than METERS at the start or
end
--geometry.min-radius.fix
Straighten edge geometries to avoid turning radii less than geometry.min-radius
--geometry.min-radius.fix.railways
Straighten edge geometries to avoid turning radii less than geometry.min-radius
(only railways)
--geometry.junction-mismatch-threshold FLOAT
Warn if the junction shape is to far away from the original node position
--geometry.check-overlap FLOAT
Warn if edges overlap by more than the given threshold value
--geometry.check-overlap.vertical-threshold FLOAT
Ignore overlapping edges if they are separated vertically by the given threshold.
--geometry.avoid-overlap
Modify edge geometries to avoid overlap at junctions
--join-lanes
join adjacent lanes that have the same permissions and which do not admit
lane-changing (sidewalks and disallowed lanes)
--ptline.match-dist FLOAT
Matches stops outside the road network to the referencing pt line when below the
given distance
--geometry.max-grade FLOAT
Warn about edge geometries with a grade in % above FLOAT.
--geometry.max-grade.fix
Smooth edge edge geometries with a grade in above the warning threshold.
--offset.disable-normalization
Turn off normalizing node positions
--offset.x FLOAT
Adds FLOAT to net x-positions
--offset.y FLOAT
Adds FLOAT to net y-positions
--offset.z FLOAT
Adds FLOAT to net z-positions
--flip-y-axis
Flips the y-coordinate along zero
--roundabouts.guess
Enable roundabout-guessing
--opposites.guess
Enable guessing of opposite direction lanes usable for overtaking
--opposites.guess.fix-lengths
Ensure that opposite edges have the same length
--lefthand
Assumes left-hand traffic on the network
--edges.join
Merges edges which connect the same nodes and are close to each other (recommended
for VISSIM import)
--speed.offset FLOAT
Modifies all edge speeds by adding FLOAT
--speed.factor FLOAT
Modifies all edge speeds by multiplying by FLOAT
--speed.minimum FLOAT
Modifies all edge speeds to at least FLOAT
Building Defaults Options:
-L, --default.lanenumber INT
The default number of lanes in an edge
--default.lanewidth FLOAT
The default width of lanes
-S, --default.speed FLOAT
The default speed on an edge (in m/s)
-P, --default.priority INT
The default priority of an edge
--default.type STR
The default edge type
--default.sidewalk-width FLOAT
The default width of added sidewalks
--default.bikelane-width FLOAT
The default width of added bike lanes
--default.crossing-width FLOAT
The default width of a pedestrian crossing
--default.disallow STR
The default for disallowed vehicle classes
--default.junctions.keep-clear
Whether junctions should be kept clear by default
--default.junctions.radius FLOAT
The default turning radius of intersections
--default.right-of-way STR
The default algorithm for computing right of way rules ('default', 'edgePriority')
TLS Building Options:
--tls.discard-loaded
Does not instatiate traffic lights loaded from other formats than plain-XML
--tls.discard-simple
Does not instatiate traffic lights at geometry-like nodes loaded from other formats
than plain-XML
--tls.set STR[]
Interprets STR[] as list of junctions to be controlled by TLS
--tls.unset STR[]
Interprets STR[] as list of junctions to be not controlled by TLS
--tls.guess
Turns on TLS guessing
--tls.guess.threshold FLOAT
Sets minimum value for the sum of all incoming lane speeds when guessing TLS
--tls.taz-nodes
Sets district nodes as tls-controlled
--tls.guess.joining
Includes node clusters into guess
--tls.join
Tries to cluster tls-controlled nodes
--tls.join-dist FLOAT
Determines the maximal distance for joining traffic lights (defaults to 20)
--tls.uncontrolled-within
Do not control edges that lie fully within a joined traffic light. This may cause
collisions but allows old traffic light plans to be used
--tls.ignore-internal-junction-jam
Do not build mutually conflicting response matrix, potentially ignoring vehicles
that are stuck at an internal junction when their phase has ended
--tls.guess-signals
Interprets tls nodes surrounding an intersection as signal positions for a larger
TLS. This is typical pattern for OSM-derived networks
--tls.guess-signals.dist FLOAT
Distance for interpreting nodes as signal locations
--tls.cycle.time INT
Use INT as cycle duration
--tls.green.time INT
Use INT as green phase duration
-D, --tls.yellow.min-decel FLOAT
Defines smallest vehicle deceleration
--tls.yellow.patch-small
Given yellow times are patched even if being too short
--tls.yellow.time INT
Set INT as fixed time for yellow phase durations
--tls.red.time INT
Set INT as fixed time for red phase duration at traffic lights that do not have a
conflicting flow
--tls.allred.time INT
Set INT as fixed time for intermediate red phase after every switch
--tls.minor-left.max-speed FLOAT
Use FLOAT as threshold for allowing left-turning vehicles to move in the same phase
as oncoming straight-going vehicles
--tls.left-green.time INT
Use INT as green phase duration for left turns (s). Setting this value to 0
disables additional left-turning phases
--tls.crossing-min.time INT
Use INT as minimum green duration for pedestrian crossings (s).
--tls.crossing-clearance.time INT
Use INT as clearance time for pedestrian crossings (s).
--tls.scramble.time INT
Use INT as green phase duration for pedestrian scramble phase (s).
--tls.half-offset STR[]
TLSs in STR[] will be shifted by half-phase
--tls.quarter-offset STR[]
TLSs in STR[] will be shifted by quarter-phase
--tls.default-type STR
TLSs with unspecified type will use STR as their algorithm
--tls.layout STR
Set phase layout four grouping opposite directions or grouping all movements for
one incoming edge ['opposites', 'incoming']
--tls.min-dur INT
Default minimum phase duration for traffic lights with variable phase length
--tls.max-dur INT
Default maximum phase duration for traffic lights with variable phase length
Ramp Guessing Options:
--ramps.guess
Enable ramp-guessing
--ramps.guess-acceleration-lanes
Guess on-ramps and mark acceleration lanes if they exist but do not add new lanes
--ramps.max-ramp-speed FLOAT
Treat edges with speed > FLOAT as no ramps
--ramps.min-highway-speed FLOAT
Treat edges with speed < FLOAT as no highways
--ramps.ramp-length FLOAT
Use FLOAT as ramp-length
--ramps.set STR[]
Tries to handle the given edges as ramps
--ramps.unset STR[]
Do not consider the given edges as ramps
--ramps.no-split
Avoids edge splitting
Edge Removal Options:
--keep-edges.min-speed FLOAT
Only keep edges with speed in meters/second > FLOAT
--remove-edges.explicit STR[]
Remove edges in STR[]
--keep-edges.explicit STR[]
Only keep edges in STR[] or those which are kept due to other keep-edges or
remove-edges options
--keep-edges.input-file FILE
Only keep edges in FILE (Each id on a single line. Selection files from SUMO-GUI
are also supported) or those which are kept due to other keep-edges or remove-edges
options
--remove-edges.input-file FILE
Remove edges in FILE. (Each id on a single line. Selection files from SUMO-GUI are
also supported)
--keep-edges.postload
Remove edges after joining
--keep-edges.in-boundary STR[]
Only keep edges which are located within the given boundary (given either as
CARTESIAN corner coordinates <xmin,ymin,xmax,ymax> or as polygon <x0,y0,x1,y1,...>)
--keep-edges.in-geo-boundary STR[]
Only keep edges which are located within the given boundary (given either as
GEODETIC corner coordinates <lon-min,lat-min,lon-max,lat-max> or as polygon
<lon0,lat0,lon1,lat1,...>)
--keep-edges.by-vclass STR[]
Only keep edges which allow one of the vclasss in STR[]
--remove-edges.by-vclass STR[]
Remove edges which allow only vclasses from STR[]
--keep-edges.by-type STR[]
Only keep edges where type is in STR[]
--keep-edges.components INT
Only keep the INT largest weakly connected components
--remove-edges.by-type STR[]
Remove edges where type is in STR[]
--remove-edges.isolated
Removes isolated edges
Unregulated Nodes Options:
--keep-nodes-unregulated
All nodes will be unregulated
--keep-nodes-unregulated.explicit STR[]
Do not regulate nodes in STR[]
--keep-nodes-unregulated.district-nodes
Do not regulate district nodes
Junctions Options:
--junctions.right-before-left.speed-threshold FLOAT
Allow building right-before-left junctions when the incoming edge speeds are below
FLOAT (m/s)
--no-internal-links
Omits internal links
--no-turnarounds
Disables building turnarounds
--no-turnarounds.tls
Disables building turnarounds at tls-controlled junctions
--no-turnarounds.geometry
Disables building turnarounds at geometry-like junctions
--no-turnarounds.except-deadend
Disables building turnarounds except at dead end junctions
--no-left-connections
Disables building connections to left
--junctions.join
Joins junctions that are close to each other (recommended for OSM import)
--junctions.join-dist FLOAT
Determines the maximal distance for joining junctions (defaults to 10)
--junctions.join-exclude STR[]
Interprets STR[] as list of junctions to exclude from joining
--junctions.corner-detail INT
Generate INT intermediate points to smooth out intersection corners
--junctions.internal-link-detail INT
Generate INT intermediate points to smooth out lanes within the intersection
--junctions.scurve-stretch FLOAT
Generate longer intersections to allow for smooth s-curves when the number of lanes
changes
--junctions.join-turns
Builds common edges for turning connections with common from- and to-edge. This
causes discrepancies between geometrical length and assigned length due to
averaging but enables lane-changing while turning
--junctions.limit-turn-speed FLOAT
Limits speed on junctions to an average lateral acceleration of at most FLOAT
m/s^2)
--junctions.limit-turn-speed.min-angle FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees). The value is
subtracted from the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.min-angle.railway FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees) on railway edges.
The value is subtracted from the geometric angle before computing the turning
radius.
--junctions.limit-turn-speed.warn.straight FLOAT
Warn about turn speed limits that reduce the speed of straight connections by more
than FLOAT
--junctions.limit-turn-speed.warn.turn FLOAT
Warn about turn speed limits that reduce the speed of turning connections (no
u-turns) by more than FLOAT
--junctions.small-radius FLOAT
Default radius for junctions that do not require wide vehicle turns
--rectangular-lane-cut
Forces rectangular cuts between lanes and intersections
--check-lane-foes.roundabout
Allow driving onto a multi-lane road if there are foes on other lanes (at
roundabouts)
--check-lane-foes.all
Allow driving onto a multi-lane road if there are foes on other lanes (everywhere)
Pedestrian Options:
--sidewalks.guess
Guess pedestrian sidewalks based on edge speed
--sidewalks.guess.max-speed FLOAT
Add sidewalks for edges with a speed equal or below the given limit
--sidewalks.guess.min-speed FLOAT
Add sidewalks for edges with a speed above the given limit
--sidewalks.guess.from-permissions
Add sidewalks for edges that allow pedestrians on any of their lanes regardless of
speed
--sidewalks.guess.exclude STR[]
Do not guess sidewalks for the given list of edges
--crossings.guess
Guess pedestrian crossings based on the presence of sidewalks
--crossings.guess.speed-threshold FLOAT
At uncontrolled nodes, do not build crossings across edges with a speed above the
threshold
--walkingareas
Always build walking areas even if there are no crossings
Bicycle Options:
--bikelanes.guess
Guess bike lanes based on edge speed
--bikelanes.guess.max-speed FLOAT
Add bike lanes for edges with a speed equal or below the given limit
--bikelanes.guess.min-speed FLOAT
Add bike lanes for edges with a speed above the given limit
--bikelanes.guess.from-permissions
Add bike lanes for edges that allow bicycles on any of their lanes regardless of
speed
--bikelanes.guess.exclude STR[]
Do not guess bikelanes for the given list of edges
Railway Options:
--railway.signals.discard
Discard all railway signal information loaded from other formats than plain-xml
--railway.topology.repair
Repair topology of the railway network
--railway.topology.repair.connect-straight
Allow bidiretional rail use wherever rails with opposite directions meet at a
straight angle
--railway.topology.all-bidi
Make all rails usable in both direction
--railway.access-distance FLOAT
The search radius for finding suitable road accesses for rail stops
--railway.max-accesses INT
The maximum roud accesses registered per rail stops
--railway.access-factor FLOAT
The walking length of the access is computed as air-line distance multiplied by
FLOAT
Formats Options:
--osm.skip-duplicates-check
Skips the check for duplicate nodes and edges
--osm.elevation
Imports elevation data
--osm.layer-elevation FLOAT
Reconstruct (relative) elevation based on layer data. Each layer is raised by FLOAT
m
--osm.layer-elevation.max-grade FLOAT
Maximum grade threshold in % at 50km/h when reconstrucing elevation based on layer
data. The value is scaled according to road speed.
--osm.oneway-spread-right
Whether one-way roads should be spread to the side instead of centered
--osm.stop-output.length FLOAT
The default length of a public transport stop in FLOAT m
--osm.stop-output.length.bus FLOAT
The default length of a bus stop in FLOAT m
--osm.stop-output.length.tram FLOAT
The default length of a tram stop in FLOAT m
--osm.stop-output.length.train FLOAT
The default length of a train stop in FLOAT m
--osm.all-attributes
Whether additional attributes shall be imported
--matsim.keep-length
The edge lengths given in the MATSIM-file will be kept
--matsim.lanes-from-capacity
The lane number will be computed from the capacity
--shapefile.street-id STR
Read edge ids from column STR
--shapefile.from-id STR
Read from-node ids from column STR
--shapefile.to-id STR
Read to-node ids from column STR
--shapefile.type-id STR
Read type ids from column STR
--shapefile.laneNumber STR
Read lane number from column STR
--shapefile.speed STR
Read speed from column STR
--shapefile.name STR
Read (non-unique) name from column STR
--shapefile.node-join-dist FLOAT
Distance threshold for determining whether distinct shapes are connected (used when
from-id and to-id are not available)
--shapefile.add-params STR[]
Add the list of field names as edge params
--shapefile.use-defaults-on-failure
Uses edge type defaults on problems
--shapefile.all-bidirectional
Insert edges in both directions
--shapefile.guess-projection
Guess the proper projection
--vissim.join-distance FLOAT
Structure join offset
--vissim.default-speed FLOAT
Use FLOAT as default speed
--vissim.speed-norm FLOAT
Factor for edge velocity
--vissim.report-unset-speeds
Writes lanes without an explicit speed set
--visum.language-file FILE
Load language mappings from FILE
--visum.use-type-priority
Uses priorities from types
--visum.use-type-laneno
Uses lane numbers from types
--visum.use-type-speed
Uses speeds from types
--visum.connector-speeds FLOAT
Sets connector speed
--visum.connectors-lane-number INT
Sets connector lane number
--visum.no-connectors
Excludes connectors
--visum.recompute-lane-number
Computes the number of lanes from the edges' capacities
--visum.verbose-warnings
Prints all warnings, some of which are due to VISUM misbehaviour
--visum.lanes-from-capacity.norm FLOAT
The factor for flow to no. lanes conversion
--opendrive.import-all-lanes
Imports all lane types
--opendrive.ignore-widths
Whether lane widths shall be ignored.
--opendrive.curve-resolution FLOAT
The geometry resolution in m when importing curved geometries as line segments.
--opendrive.advance-stopline FLOAT
Allow stop lines to be built beyond the start of the junction if the geometries
allow so
--opendrive.min-width FLOAT
The minimum lane width for determining start or end of variable-width lanes
--opendrive.internal-shapes
Import internal lane shapes
Netedit Options:
-a, --additional-files FILE
Load additional and shapes descriptions from FILE(s)
--additionals-output STR
file in which additionals must be saved
-r, --route-files FILE
Load demand elements descriptions from FILE(s)
--demandelements-output STR
file in which demand elements must be saved
--TLSPrograms-output STR
file in which TLS Programs must be saved
Visualisation Options:
--disable-laneIcons
Disable icons of special lanes
-T, --disable-textures
-g, --gui-settings-file FILE
Load visualisation settings from FILE
--registry-viewport
Load current viewport from registry
--window-size STR[]
Create initial window with the given x,y size
--window-pos STR[]
Create initial window at the given x,y position
--gui-testing
Enable overlay for screen recognition
--gui-testing-debug
Enable output messages during GUI-Testing
--gui-testing-debug-gl
Enable output messages during GUI-Testing specific of gl functions
--gui-testing.setting-output FILE
Save gui settings in the given settings-output file
Time Options:
--begin TIME
Defines the begin time in seconds; The simulation starts at this time
--end TIME
Defines the end time in seconds; The simulation ends at this time
Report Options:
-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "auto" or "always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--ignore-errors
Continue on broken input
--ignore-errors.connections
Continue on invalid connections
--show-errors.connections-first-try
Show errors in connections at parsing
--ignore-errors.edge-type
Continue on unknown edge types
Random Number Options:
--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
EXAMPLES
netedit --new
start plain GUI with empty net
netedit -s <SUMO_NET>
edit SUMO network
netedit -c <CONFIGURATION>
edit net with options read from file
REPORTING BUGS
Report bugs at <https://github.com/eclipse/sumo/issues>.
Get in contact via <sumo@dlr.de>.
Build features: x86_64-pc-linux-gnu GDAL GUI
Copyright (C) 2001-2019 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Eclipse SUMO netedit Version 1.4.0 is part of SUMO.
This program and the accompanying materials are made available under the terms of the
Eclipse Public License v2.0 which accompanies this distribution, and is available at
http://www.eclipse.org/legal/epl-v20.html
SPDX-License-Identifier: EPL-2.0