Provided by: postgresql-common_214ubuntu0.1_all bug

NAME

       pg_buildext - Build and install a PostgreSQL extension

SYNOPSIS

       pg_buildext [options] action [src-dir] [arguments]

DESCRIPTION

       pg_buildext is a script that will build a PostgreSQL extension in a VPATH way, for
       potentially several PostgreSQL server versions in parallel.  It builds for the
       intersection of versions known in debian/pgversions (versions supported by the package)
       and in /usr/share/postgresql-common/supported-versions (versions supported in this
       release).

USAGE

       Packages using pg_buildext should be prepared to build binaries for PostgreSQL versions
       that are not present in Debian unstable, e.g. for older releases when building backports
       for Debian (old)stable (possibly including backports of newer PostgreSQL releases), or for
       all PostgreSQL releases when the package is built for apt.postgresql.org.

       As the set of binary packages depends on the target PostgreSQL versions, debian/control is
       generated from a template in debian/control.in when pg_buildext updatecontrol is run.
       Occurrences of PGVERSION in package sections are replaced by the target PostgreSQL
       version. Include /usr/share/postgresql-common/pgxs_debian_control.mk in debian/rules to
       run a check at build time if updating debian/control is required.

       As pg_buildext invokes make for the build, install, and clean actions, invocations from
       debian/rules (which is a makefile) should be prefixed with + so the sub-makes can talk
       with the make jobserver. Additional makefile variables can be passed to make via the -m
       option.

       Many extensions support make installcheck testing using pg_regress. As this needs the
       package to be installed, it cannot be run at build time.  Instead, the tests should be run
       using autopkgtest from debian/tests/*.

       If debian/tests/control.in exists, occurrences of package names containing PGVERSION are
       replaced by lists of package names with the target PostgreSQL versions filled in. (If no
       replacing is needed in debian/tests/control, it is fine to provide the tests control file
       directly.)

OPTIONS

       -cio arg
       -s  Passed to pg_virtualenv when running installcheck.

       -m arg
           Passed to make.

ACTIONS

       Most actions expect a directory name where to build the sources. It will get created for
       you if it does not exist. If the build-dir contains a %v sign, it will get replaced by the
       specific version of PostgreSQL being built against. (Usually this parameter is build-%v.)

       supported-versions
           Print effective list of supported versions, i.e. the intersection of the sets of
           versions supported by the system (from
           /usr/share/postgresql-common/supported-versions) and the package (from
           debian/pgversions).

           Use this when building packages.

       installed-versions
           In the list of installed packages, look for packages matching the PGVERSION package
           name templates from debian/control.in, and print the PostgreSQL major version number
           part.

           Use this when testing packages.

       checkcontrol
           Check if debian/control needs updating from debian/control.in. This is invoked from
           /usr/share/postgresql-common/pgxs_debian_control.mk. When building for a backports or
           pgdg suite as determined by debian/changelog, this action also updates the control
           file. Otherwise, updatecontrol needs to be run manually.

       updatecontrol
           Update debian/control from debian/control.in, and debian/tests/control from
           debian/tests/control.in if the latter exists.

       configure [src-dir] build-dir [extra-configure-options]
           For every supported version, call ../configure from the build-dir directory. (Most
           PostgreSQL extensions do not have a configure script.)

       build [src-dir] build-dir [extra-cflags]
           Build the extension in the build-dir directory.

       install [src-dir] build-dir package-pattern
           Invoke make install from the build-dir directory.  The third parameter specifies the
           package name to use. Most packages use postgresql-%v-pkgname. Make will be called with
           DESTDIR="$(CURDIR)/debian/package".

       clean [src-dir] build-dir
           Clean the build directory.

       loop [src-dir] package-pattern
           As a variant to calling build and install separately for VPATH builds, loop over the
           supported PostgreSQL versions in the top source directory. This should be used if the
           package does not support VPATH builds. As it also invokes make install, it should be
           placed were installation happens in debian/rules, rather than where build would
           normally be called.

       installcheck [src-dir] [build-dir]
           Use pg_virtualenv make installcheck to run the extension regression tests.  This is
           meant to be run from debian/tests/control using autopkgtest. If build-dir is omitted,
           the top source directory is used.

           Other than the other actions which run on the "supported" versions, if
           debian/control.in exists, this one runs on the "installed" versions as reported by
           installed-versions.

       Sometimes it is desirable to run extra code per version before invoking the action, in
       that case the loop over supported versions needs to be in the calling script. To
       facilitate this mode, actions can also be called as action-version. See the installcheck
       example below.

SUPPORTED VERSIONS

       pg_buildext reads debian/pgversions to decide which PostgreSQL to build modules/extensions
       for. This file contains one PostgreSQL version number per line, in the following formats:

       all Support all versions. This is recommended unless there are known incompatibilities.

       NN  Support this version.

       NN+ Support this and all greater versions.

       #...
           Comment.

       For a version to be used, it must also be listed in the output of
       /usr/share/postgresql-common/supported-versions. See this file for how to configure the
       list of supported versions on your system.

EXAMPLE

       debian/control.in:
             Source: postgresql-foobar
             Build-Depends: debhelper, postgresql-server-dev-all (>= 153~)

             Package: postgresql-PGVERSION-foobar
             Depends: ${misc:Depends}, ${shlibs:Depends}, postgresql-PGVERSION

       debian/pgversions:
             all

             # alternatives:
             #9.6
             #11+

       debian/rules:
             #!/usr/bin/make -f

             include /usr/share/postgresql-common/pgxs_debian_control.mk

             # omit this if the package does not use autoconf
             override_dh_auto_configure:
                     +pg_buildext configure build-%v "--libdir=/usr/lib/postgresql/%v/lib --datadir=/usr/share/postgresql-%v-foobar"

             override_dh_auto_build:
                     +pg_buildext build build-%v

             override_dh_auto_test:
                     # nothing to do here, see debian/tests/* instead

             override_dh_auto_install:
                     +pg_buildext install build-%v postgresql-%v-foobar

             override_dh_installdocs:
                     dh_installdocs --all README.*

             override_dh_auto_clean:
                     +pg_buildext clean build-%v

             %:
                     dh $@

       debian/tests/control:
             Depends: @, postgresql-server-dev-all
             Tests: installcheck
             Restrictions: allow-stderr

       debian/tests/control.in: (optional)
             Depends: @, postgresql-contrib-PGVERSION, postgresql-PGVERSION-bar
             Tests: installcheck
             Restrictions: allow-stderr

       debian/tests/installcheck:
             #!/bin/sh
             pg_buildext installcheck
             # alternatively: pg_buildext installcheck build-%v

             # Running extra code before invoking the actual action:
             set -e
             for v in $(pg_buildext installed-versions); do
                     test -L build-$v/sql || ln -s ../sql build-$v/
                     test -L build-$v/expected || ln -s ../expected build-$v/
                     pg_buildext installcheck-$v build-$v
             done

SOURCE DIRECTORY

       If the package source code is not in the top level directory (i.e. the directory which has
       debian/ as subdirectory), use the src-dir argument, where src-dir must be an absolute
       path. Example:

         override_dh_auto_build:
                 +pg_buildext build $(CURDIR)/postgresql-module build-%v

COMPATIBILITY

       pg_buildext loop was introduced in postgresql-server-dev-all (>= 141~).

       The usage of "all" or "NN+" in debian/pgversions was introduced in postgresql-server-dev-
       all (>= 148~).

       pg_buildext installcheck was introduced in postgresql-server-dev-all (>= 153~).

       PG_VIRTUALENV_UNSHARE=-n was introduced in postgresql-common (>= 170~).

       Handling of debian/tests/control.in with PGVERSION replacement was introduced in
       postgresql-common (>= 171~).

       The action installed-versions was introduced in postgresql-common (>= 208~).  installcheck
       was switched to use it in the same version.

SEE ALSO

       /usr/share/postgresql-common/supported-versions, autopkgtest(1), pg_virtualenv(1).

AUTHORS

       Dimitri Fontaine <dim@tapoueh.org>, with extensions by Christoph Berg <myon@debian.org>.