Provided by: libqmi-utils_1.24.6-2_amd64 bug


       qmi-firmware-update - Update firmware in QMI devices


              lt-qmi-firmware-update [OPTION?] FILE1 FILE2... - Update firmware in QMI devices

       Generic device selection options

       -s, --busnum-devnum=[BUS:]DEV
              Select device by bus and device number (in decimal).

       -d, --vid-pid=VID[:PID]
              Select device by device vendor and product id (in hexadecimal).

       -w, --cdc-wdm=[PATH]
              Select device by QMI/MBIM cdc-wdm device path (e.g. /dev/cdc-wdm0).

       -t, --tty=[PATH]
              Select device by serial device path (e.g. /dev/ttyUSB2).

       Update options (normal mode)

       -u, --update
              Launch firmware update process.

       -f, --firmware-version=[VERSION]
              Firmware version (e.g. '').

       -c, --config-version=[VERSION]
              Config version (e.g. '005.025_002').

       -C, --carrier=[CARRIER]
              Carrier name (e.g. 'Generic').

              Run update operation even with version string errors.

              Download images even if module says it already has them.

              Index storage for the modem image.

              Don't wait to validate the running firmware after update.

       Reset options (normal mode)

       -b, --reset
              Reset device into download mode.

       Update options (download mode)

       -U, --update-download
              Launch firmware update process while in download (boot & hold) mode.

       Verify options

       -z, --verify
              Analyze and verify firmware images.

   Application Options:
       -p, --device-open-proxy
              Request to use the 'qmi-proxy' proxy.

              Open a cdc-wdm device explicitly in QMI mode

              Open a cdc-wdm device explicitly in MBIM mode

              Open a cdc-wdm device in either QMI or MBIM mode (default)

              Ignore ModemManager runtime check

       -v, --verbose
              Run action with verbose messages in standard output, including the debug ones.

       -S, --silent
              Run action with no messages in standard output; not even the error ones.

       -L, --verbose-log=[PATH]
              Write verbose messages to an output file.

       -V, --version
              Print version.

       -h, --help
              Show help.

       -H, --help-examples
              Show help examples.



              Use  this  program with caution. The authors take *no* responsibility if any device
              gets broken as a result of using this program.

              Please report issues to the libqmi mailing list at:


       qmi-firmware-update 1.24.6

              Copyright (C) 2016-2019 Bj?rn  Mork  Copyright  (C)  2016-2019  Aleksander  Morgado
              Copyright (C) 2016-2018 Zodiac Inflight Innovations

       License  GPLv2+: GNU GPL version 2 or later <> This is
       free software: you are free to change and redistribute it.  There is NO WARRANTY,  to  the
       extent permitted by law.


       The  full documentation for qmi-firmware-update is maintained as a Texinfo manual.  If the
       info and qmi-firmware-update programs are properly installed at your site, the command

              info qmi-firmware-update

       should give you access to the complete manual.