Provided by: re2c_1.3-1ubuntu0.1_amd64 
NAME
re2c - convert regular expressions to C/C++ code
SYNOPSIS
re2c [OPTIONS] INPUT_FILE [-o OUTPUT_FILE]
DESCRIPTION
Re2c is a lexer generator for C/C++. It finds regular expression specifications inside of
C/C++ comments and compiles them to a deterministic finite state machine. The user should
write some interface code in order to bind the generated lexer to the program environment.
Sections EOF handling and buffer refilling explain how the generated lexer checks for the
end of input and (if necessary) asks for more input. Various re2c features are described
in sections include files, header files, submatch extraction, storable state, reusable
blocks, encoding support, start conditions, skeleton programs and visualization and debug.
Re2c provides a lot of options, configurations and directives that allow one to customize
the generated code.
OPTIONS
-? -h --help
Show help message.
-1 --single-pass
Deprecated. Does nothing (single pass is the default now).
-8 --utf-8
Generate a lexer that reads input in UTF-8 encoding. re2c assumes that character
range is 0 -- 0x10FFFF and character size is 1 byte.
-b --bit-vectors
Optimize conditional jumps using bit masks. Implies -s.
-c --conditions --start-conditions
Enable support of Flex-like "conditions": multiple interrelated lexers within one
block. Option --start-conditions is a legacy alias; use --conditions instead.
--case-insensitive
Treat single-quoted and double-quoted strings as case-insensitive.
--case-inverted
Invert the meaning of single-quoted and double-quoted strings: treat single-quoted
strings as case-sensitive and double-quoted strings as case-insensitive.
-D --emit-dot
Instead of normal output generate lexer graph in .dot format. The output can be
converted to an image with the help of Graphviz (e.g. something like dot -Tpng
-odfa.png dfa.dot).
-d --debug-output
Emit YYDEBUG in the generated code. YYDEBUG should be defined by the user in the
form of a void function with two parameters: state (lexer state or -1) and symbol
(current input symbol of type YYCTYPE).
--dfa-minimization <moore | table>
The internal algorithm used by re2c to minimize the DFA: moore (the default) is
Moore algorithm, and table is the "table filling" algorithm. Both algorithms
should produce the same DFA up to states relabeling; table filling is simpler and
much slower and serves as a reference implementation.
--dump-adfa
Debug option: output DFA after tunneling (in .dot format).
--dump-cfg
Debug option: output control flow graph of tag variables (in .dot format).
--dump-closure-stats
Debug option: output statistics on the number of states in closure.
--dump-dfa-det
Debug option: output DFA immediately after determinization (in .dot format).
--dump-dfa-min
Debug option: output DFA after minimization (in .dot format).
--dump-dfa-tagopt
Debug option: output DFA after tag optimizations (in .dot format).
--dump-dfa-raw
Debug option: output DFA under construction with expanded state-sets (in .dot
format).
--dump-interf
Debug option: output interference table produced by liveness analysis of tag
variables.
--dump-nfa
Debug option: output NFA (in .dot format).
-e --ecb
Generate a lexer that reads input in EBCDIC encoding. re2c assumes that character
range is 0 -- 0xFF an character size is 1 byte.
--eager-skip
Make the generated lexer advance the input position "eagerly": immediately after
reading input symbol. By default this happens after transition to the next state.
Implied by --no-lookahead.
--empty-class <match-empty | match-none | error>
Define the way re2c treats empty character classes. With match-empty (the default)
empty class matches empty input (which is illogical, but backwards-compatible).
With``match-none`` empty class always fails to match. With error empty class
raises a compilation error.
--encoding-policy <fail | substitute | ignore>
Define the way re2c treats Unicode surrogates. With fail re2c aborts with an error
when a surrogate is encountered. With substitute re2c silently replaces surrogates
with the error code point 0xFFFD. With ignore (the default) re2c treats surrogates
as normal code points. The Unicode standard says that standalone surrogates are
invalid, but real-world libraries and programs behave in different ways.
-f --storable-state
Generate a lexer which can store its inner state. This is useful in push-model
lexers which are stopped by an outer program when there is not enough input, and
then resumed when more input becomes available. In this mode users should
additionally define YYGETSTATE() and YYSETSTATE(state) macros and variables yych,
yyaccept and state as part of the lexer state.
-F --flex-syntax
Partial support for Flex syntax: in this mode named definitions don't need the
equal sign and the terminating semicolon, and when used they must be surrounded by
curly braces. Names without curly braces are treated as double-quoted strings.
-g --computed-gotos
Optimize conditional jumps using non-standard "computed goto" extension (which must
be supported by the C/C++ compiler). re2c generates jump tables only in complex
cases with a lot of conditional branches. Complexity threshold can be configured
with cgoto:threshold configuration. This option implies -b.
-I PATH
Add PATH to the list of locations which are used when searching for include files.
This option is useful in combination with /*!include:re2c ... */ directive. Re2c
looks for FILE in the directory of including file and in the list of include paths
specified by -I option.
-i --no-debug-info
Do not output #line information. This is useful when the generated code is tracked
by some version control system or IDE.
--input <default | custom>
Specify re2c input API. Option default is the default API composed of pointer-like
primitives YYCURSOR, YYMARKER, YYLIMIT etc. Option custom is the generic API
composed of function-like primitives YYPEEK(), YYSKIP(), YYBACKUP(), YYRESTORE()
etc.
--input-encoding <ascii | utf8>
Specify the way re2c parses regular expressions. With ascii (the default) re2c
handles input as ASCII-encoded: any sequence of code units is a sequence of
standalone 1-byte characters. With utf8 re2c handles input as UTF8-encoded and
recognizes multibyte characters.
--location-format <gnu | msvc>
Specify location format in messages. With gnu locations are printed as
'filename:line:column: ...'. With msvc locations are printed as
'filename(line,column) ...'. Default is gnu.
--no-generation-date
Suppress date output in the generated file.
--no-lookahead
Use TDFA(0) instead of TDFA(1). This option has effect only with --tags or
--posix-captures options.
--no-optimize-tags
Suppress optimization of tag variables (useful for debugging).
--no-version
Suppress version output in the generated file.
-o OUTPUT --output=OUTPUT
Specify the OUTPUT file.
-P --posix-captures
Enable submatch extraction with POSIX-style capturing groups.
--posix-closure <gor1 | gtop>
Specify shortest-path algorithm used for construction of epsilon-closure with POSIX
disambiguation semantics: gor1 (the default) stands for Goldberg-Radzik algorithm,
and gtop stands for "global topological order" algorithm.
-r --reusable
Allows reuse of re2c rules with /*!rules:re2c */ and /*!use:re2c */ blocks. Exactly
one rules-block must be present. The rules are saved and used by every use-block
that follows, which may add its own rules and configurations.
-S --skeleton
Ignore user-defined interface code and generate a self-contained "skeleton"
program. Additionally, generate input files with strings derived from the regular
grammar and compressed match results that are used to verify "skeleton" behavior on
all inputs. This option is useful for finding bugs in optimizations and code
generation.
-s --nested-ifs
Use nested if statements instead of switch statements in conditional jumps. This
usually results in more efficient code with non-optimizing C/C++ compilers.
--stadfa
Use staDFA algorithm for submatch extraction. The main difference with TDFA is that
tag operations in staDFA are placed in states, not on transitions.
-T --tags
Enable submatch extraction with tags.
-t HEADER --type-header=HEADER
Generate a HEADER file that contains enum with condition names. Requires -c
option.
-u --unicode
Generate a lexer that reads UTF32-encoded input. Re2c assumes that character range
is 0 -- 0x10FFFF and character size is 4 bytes. This option implies -s.
-V --vernum
Show version information in MMmmpp format (major, minor, patch).
--verbose
Output a short message in case of success.
-v --version
Show version information.
-w --wide-chars
Generate a lexer that reads UCS2-encoded input. Re2c assumes that character range
is 0 -- 0xFFFF and character size is 2 bytes. This option implies -s.
-x --utf-16
Generate a lexer that reads UTF16-encoded input. Re2c assumes that character range
is 0 -- 0x10FFFF and character size is 2 bytes. This option implies -s.
WARNINGS
-W Turn on all warnings.
-Werror
Turn warnings into errors. Note that this option alone doesn't turn on any
warnings; it only affects those warnings that have been turned on so far or will be
turned on later.
-W<warning>
Turn on warning.
-Wno-<warning>
Turn off warning.
-Werror-<warning>
Turn on warning and treat it as an error (this implies -W<warning>).
-Wno-error-<warning>
Don't treat this particular warning as an error. This doesn't turn off the warning
itself.
-Wcondition-order
Warn if the generated program makes implicit assumptions about condition numbering.
One should use either the -t, --type-header option or the /*!types:re2c*/ directive
to generate a mapping of condition names to numbers and then use the autogenerated
condition names.
-Wempty-character-class
Warn if a regular expression contains an empty character class. Trying to match an
empty character class makes no sense: it should always fail. However, for
backwards compatibility reasons re2c allows empty character classes and treats them
as empty strings. Use the --empty-class option to change the default behavior.
-Wmatch-empty-string
Warn if a rule is nullable (matches an empty string). If the lexer runs in a loop
and the empty match is unintentional, the lexer may unexpectedly hang in an
infinite loop.
-Wswapped-range
Warn if the lower bound of a range is greater than its upper bound. The default
behavior is to silently swap the range bounds.
-Wundefined-control-flow
Warn if some input strings cause undefined control flow in the lexer (the faulty
patterns are reported). This is the most dangerous and most common mistake. It can
be easily fixed by adding the default rule * which has the lowest priority, matches
any code unit, and consumes exactly one code unit.
-Wunreachable-rules
Warn about rules that are shadowed by other rules and will never match.
-Wuseless-escape
Warn if a symbol is escaped when it shouldn't be. By default, re2c silently
ignores such escapes, but this may as well indicate a typo or an error in the
escape sequence.
-Wnondeterministic-tags
Warn if a tag has n-th degree of nondeterminism, where n is greater than 1.
-Wsentinel-in-midrule
Warn if the sentinel symbol occurs in the middle of a rule --- this may cause reads
past the end of buffer, crashes or memory corruption in the generated lexer. This
warning is only applicable if the sentinel method of checking for the end of input
is used. It is set to an error if re2c:sentinel configuration is used.
SYNTAX
A re2c program consists of a number of re2c blocks and directives intermixed with normal
C/C++ code. Each re2c block consists of a sequence of named definitions, configurations
and rules that contain regular expressions. The generated lexer communicates with the
outer world by the means of user interface. Rules consist of a regular expression
followed by a user-defined action (semantic action): a block of C/C++ code that is
executed in case of successful match. Semantic action can be either an arbitrary block of
code enclosed in curly braces { and }, or a block of code without curly braces preceded
with := and ended with a newline that is not followed by a whitespace. If multiple rules
match, longest match takes precedence. If multiple rules match the same string, the
earlier rule takes priority. If -c --conditions option is used, then rules have more
complex form described in the section about conditions. There are two special kinds of
rules:
• Default rule * which has the lowest priority reagrdless of its place in the source code,
matches any code unit and consumes exactly one code unit. This rule should always be
defined.
• EOF rule $ which matches the end of input. This rule should be defined if the simplified
EOF handling method is used.
Named definitions are of the form name = regexp ; where name is an identifier that
consists of letters, digits and underscores, and regexp is a regular expression. With -F
--flex-syntax option named definitions are also of the form name regexp. Each name should
be defined before it is used.
REGULAR EXPRESSIONS
re2c uses the following syntax for regular expressions:
• "foo" case-sensitive string literal
• 'foo' case-insensitive string literal
• [a-xyz], [^a-xyz] character class (possibly negated)
• . any character except newline
• R \ S difference of character classes R and S
• R* zero or more occurrences of R
• R+ one or more occurrences of R
• R? optional R
• R{n} repetition of R exactly n times
• R{n,} repetition of R at least n times
• R{n,m} repetition of R from n to m times
• (R) just R; parentheses are used to override precedence or for POSIX-style submatch
• R S concatenation: R followed by S
• R | S alternative: R or S
• R / S lookahead: R followed by S, but S is not consumed
• name the regular expression defined as name (or literal string "name" in Flex
compatibility mode)
• {name} the regular expression defined as name in Flex compatibility mode
• @stag an s-tag: saves the last input position at which @stag matches in a variable named
stag
• #mtag an m-tag: saves all input positions at which #mtag matches in a variable named
mtag
Character classes and string literals may contain the following escape sequences: \a, \b,
\f, \n, \r, \t, \v, \\, octal escapes \ooo and hexadecimal escapes \xhh, \uhhhh and
\Uhhhhhhhh.
INTERFACE CODE
Below is the list of all symbols which may be used by the lexer in order to interact with
the outer world. These symbols should be defined by the user, either in the form of
inplace configurations, or as C/C++ variables, functions, macros and other language
constructs. Which primitives are necessary depends on the particular use case.
yyaccept
L-value of unsigned integral type that is used to hold the number of the last
matched rule. Explicit definition by the user is necessary only with -f
--storable-state option.
YYBACKUP ()
Backup current input position (used only with --input custom option).
YYBACKUPCTX ()
Backup current input position for trailing context (used only with --input custom
option).
yych L-value of type YYCTYPE that is used to hold current input character. Explicit
definition by the user is necessary only with -f --storable-state option.
YYCONDTYPE
The type of condition identifiers (used only with -c --conditions option). Should
be generated either with /*!types:re2c*/ directive, or with -t --type-header
option.
YYCTXMARKER
L-value of type YYCTYPE * that is used to backup input position of trailing
context. It is needed only if regular expressions use the lookahead operator /.
YYCTYPE
The type of the input characters (code units). Usually it should be unsigned char
for ASCII, EBCDIC and UTF-8 encodings, unsigned short for UTF-16 or UCS-2
encodings, and unsigned int for UTF-32 encoding.
YYCURSOR
L-value of type YYCTYPE * that is used as a pointer to the current input symbol.
Initially YYCURSOR points to the first character and is advanced by the lexer
during matching. When a rule matches, YYCURSOR points past the last character of
the matched string.
YYDEBUG (state, symbol)
A function-like primitive that is used to dump debug information (only used with -d
--debug-output option). YYDEBUG should return no value and accept two arguments:
state (either lexer state or -1) and symbol (current input symbol).
YYFILL (n)
A function-like primitive that is called by the lexer when there is not enough
input. YYFILL should return no value and supply at least n additional characters.
Maximal value of n equals YYMAXFILL, which can be obtained with the /*!max:re2c*/
directive.
YYGETCONDITION ()
R-value of type YYCONDTYPE that represents current condition identifier (used only
with -c --conditions option).
YYGETSTATE ()
R-value of signed integral type that represents current lexer state (used only with
-f --storable-state option). Initial value of lexer state should be -1.
YYLESSTHAN (n)
R-value of boolean type that is true if and only if there is less than n input
characters left (used only with --input custom option).
YYLIMIT
R-value of type YYCTYPE * that marks the end of input (YYLIMIT[-1] should be the
last input character). Lexer compares YYCURSOR and YYLIMIT in order to determine
if there is enough input characters left.
YYMARKER
L-value of type YYCTYPE * used to backup input position of successful match. This
might be necessary if there is an overlapping longer rule that might also match.
YYMTAGP (t)
Append current input position to the history of m-tag t (used only with -T --tags
option).
YYMTAGPD (t)
Same as YYMTAGP, except that instead of the current position it should save the one
before it. This is used for staDFA "delayed store" actions.
YYMTAGN (t)
Append default value to the history of m-tag t (used only with -T --tags option).
YYMAXFILL
Integral constant that denotes maximal value of YYFILL argument and is
autogenerated by /*!max:re2c*/ directive.
YYMAXNMATCH
Integral constant that denotes maximal number of capturing groups in a rule and is
autogenerated by /*!maxnmatch:re2c*/ directive (used only with --posix-captures
option).
yynmatch
L-value of unsigned integral type that is used to hold the number of capturing
groups in the matching rule. Used only with -P --posix-captures option.
YYPEEK ()
R-value of type YYCTYPE that denotes current input character (used only with
--input custom option).
yypmatch
An array of l-values that are used to hold the values of s-tags corresponding to
the capturing parentheses in the matching rule. The length of array must be at
least yynmatch * 2 (ideally YYMAXNMATCH * 2). Used only with -P --posix-captures
option.
YYRESTORE ()
Restore input position (used only with --input custom option).
YYRESTORECTX ()
Restore input position from the value of trailing context (used only with --input
custom option).
YYRESTORETAG (t)
Restore input position from the value of s-tag t (used only with --input custom
option).
YYSETCONDITION (condition)
Set current condition identifier to condition (used only with -c --conditions
option).
YYSETSTATE (state)
Set current lexer state to state (used only with -f --storable-state option).
Parameter state is of signed integral type.
YYSKIP ()
Advance input position to the next character (used only with generic API).
YYSTAGP (t)
Save current input position to s-tag t (used only with -T --tags and --input custom
option).
YYSTAGPD (t)
Same as YYSTAGP, except that instead of the current position it should save the one
before it. This is used for staDFA "delayed store" actions.
YYSTAGN (t)
Save default value to s-tag t (used only with -T --tags and --input custom
options).
Default API
By default re2c operates on input using pointer-like primitives YYCURSOR, YYMARKER,
YYCTXMARKER, and YYLIMIT. Normally pointer-like primitives are defined as variables of
type YYCTYPE*, but it is possible to use STL iterators or any other abstraction as long as
it syntactically fits into the following use cases:
• ++YYCURSOR;
• yych = *YYCURSOR;
• yych = *++YYCURSOR;
• yych = *(YYMARKER = YYCURSOR);
• yych = *(YYMARKER = ++YCURSOR);
• YYMARKER = YYCURSOR;
• YYMARKER = ++YYCURSOR;
• YYCURSOR = YYMARKER;
• YYCTXMARKER = YYCURSOR + 1;
• YYCURSOR = YYCTXMARKER;
• if (YYLIMIT <= YYCURSOR) ...
• if ((YYLIMIT - YYCURSOR) < n) ...
• YYDEBUG (label, *YYCURSOR);
Generic API
If the default input model is too restrictive, then it is possible to use generic input
API enabled with --input custom option. In this mode all input operations are expressed
in terms of the primitives below. These primitives can be defined in any suitable way;
one doesn't have to stick to the pointer semantics. For example, it is possible to read
input directly from file without any buffering, or to disable YYFILL mechanism and perform
end-of-input checking on each input character from inside of YYPEEK or YYSKIP.
• YYPEEK ()
• YYSKIP ()
• YYBACKUP ()
• YYBACKUPCTX ()
• YYSTAGP (t)
• YYSTAGPD (t)
• YYSTAGN (t)
• YYMTAGP (t)
• YYMTAGPD (t)
• YYMTAGN (t)
• YYRESTORE ()
• YYRESTORECTX ()
• YYRESTORETAG (t)
• YYLESSTHAN (n)
Default input model can be expressed in terms of generic API as follows (except for
YMTAGP, YYMTAGPD and YYMTAGN, which have no default implementation):
System Message: WARNING/2 (doc/manual/api/api.rst_:, line 51)
Cannot analyze code. Pygments package not found.
.. code-block:: cpp
#define YYPEEK () *YYCURSOR
#define YYSKIP () ++YYCURSOR
#define YYBACKUP () YYMARKER = YYCURSOR
#define YYBACKUPCTX () YYCTXMARKER = YYCURSOR
#define YYRESTORE () YYCURSOR = YYMARKER
#define YYRESTORECTX () YYCURSOR = YYCTXMARKER
#define YYRESTORERAG (t) YYCURSOR = t
#define YYLESSTHAN (n) YYLIMIT - YYCURSOR < n
#define YYSTAGP (t) t = YYCURSOR
#define YYSTAGPD (t) t = YYCURSOR - 1
#define YYSTAGN (t) t = NULL
DIRECTIVES
Below is the list of all directives provided by re2c (in no particular order). More
information on each directive can be found in the related sections.
/*!re2c ... */
A standard re2c block.
%{ ... %}
A standard re2c block in -F --flex-support mode.
/*!rules:re2c ... */
A reusable re2c block (requires -r --reuse option).
/*!use:re2c ... */
A block that reuses previous rules-block specified with /*!rules:re2c ... */
(requires -r --reuse option).
/*!ignore:re2c ... */
A block which contents are ignored and cut off from the output file.
/*!max:re2c*/
This directive is substituted with the macro-definition of YYMAXFILL.
/*!maxnmatch:re2c*/
This directive is substituted with the macro-definition of YYMAXNMATCH (requires -P
--posix-captures option).
/*!getstate:re2c*/
This directive is substituted with conditional dispatch on lexer state (requires -f
--storable-state option).
/*!types:re2c ... */
This directive is substituted with the definition of condition enum (requires -c
--conditions option).
/*!stags:re2c ... */, /*!mtags:re2c ... */
These directives allow one to specify a template piece of code that is expanded for
each s-tag/m-tag variable generated by re2c. This block has two optional
configurations: format = "@@"; (specifies the template where @@ is substituted with
the name of each tag variable), and separator = ""; (specifies the piece of code
used to join the generated pieces for different tag variables).
/*!include:re2c FILE */
This directive allows one to include FILE (in the same sense as #include directive
in C/C++).
/*!header:re2c:on*/
This directive marks the start of header file. Everything after it and up to the
following /*!header:re2c:off*/ directive is processed by re2c and written to the
header file specified with -t --type-header option.
/*!header:re2c:off*/
This directive marks the end of header file started with /*!header:re2c:on*/.
CONFIGURATIONS
re2c:cgoto:threshold = 9;
With -g --computed-gotos option this value specifies the complexity threshold that
triggers the generation of jump tables rather than nested if statements and bit
masks.
re2c:cond:divider = '/* *********************************** */';
Allows one to customize the divider for condition blocks. One can use @@ to insert
condition name.
re2c:cond:divider@cond = @@;
Specifies the placeholder that will be replaced with condition name in
re2c:cond:divider.
re2c:condenumprefix = yyc;
Specifies the prefix used for condition identifiers.
re2c:cond:goto@cond = @@;
Specifies the placeholder that will be replaced with condition label in
re2c:cond:goto.
re2c:cond:goto = 'goto @@;';
Allows one to customize goto statements used with :=> style rules. One can use @@
to insert the condition name.
re2c:condprefix = yyc;
Specifies the prefix used for condition labels.
re2c:define:YYBACKUPCTX = 'YYBACKUPCTX';
Replaces YYBACKUPCTX identifier with the specified string.
re2c:define:YYBACKUP = 'YYBACKUP';
Replaces YYBACKUP identifier with the specified string.
re2c:define:YYCONDTYPE = 'YYCONDTYPE';
Enumeration type used for condition identifiers.
re2c:define:YYCTXMARKER = 'YYCTXMARKER';
Replaces the YYCTXMARKER placeholder with the specified identifier.
re2c:define:YYCTYPE = 'YYCTYPE';
Replaces the YYCTYPE placeholder with the specified type.
re2c:define:YYCURSOR = 'YYCURSOR';
Replaces the YYCURSOR placeholder with the specified identifier.
re2c:define:YYDEBUG = 'YYDEBUG';
Replaces the YYDEBUG placeholder with the specified identifier.
re2c:define:YYFILL@len = '@@';
Any occurrence of this text inside of a YYFILL will be replaced with the actual
argument.
re2c:define:YYFILL:naked = 0;
Allows to customize YYFILL invocation. If the value is non-zero, re2c outputs the
value of re2c:define:YYFILL configuration (YYFILL by default) without any
decoration: no parentheses and no semicolon (or comparison against zero in the case
of EOF rule). Otherwise the semicolon (or the comparison) is generated, and
parentheses are controlled by the re2c:yyfill:parameter configuration.
re2c:define:YYFILL = 'YYFILL';
Define a substitution for YYFILL. By default re2c generates an argument in
parentheses and a semicolon after YYFILL. If you need to make YYFILL an arbitrary
statement rather than a call, set re2c:define:YYFILL:naked to a non-zero value.
re2c:define:YYGETCONDITION:naked = 0;
Controls the parentheses after YYGETCONDITION. If non-zero, the parentheses are
omitted. If zero, they are generated.
re2c:define:YYGETCONDITION = 'YYGETCONDITION';
Substitution for YYGETCONDITION. By default re2c generates parentheses after
YYGETCONDITION. Set re2c:define:YYGETCONDITION:naked to non-zero in order to omit
the parentheses.
re2c:define:YYGETSTATE:naked = 0;
Controls the parentheses that follow YYGETSTATE. If non-zero, the parentheses are
omitted. If zero, they are generated.
re2c:define:YYGETSTATE = 'YYGETSTATE';
Substitution for YYGETSTATE. By default re2c generates parentheses after
YYGETSTATE. Set re2c:define:YYGETSTATE:naked to non-zero to omit the parentheses.
re2c:define:YYLESSTHAN = 'YYLESSTHAN';
Replaces YYLESSTHAN identifier with the specified string.
re2c:define:YYLIMIT = 'YYLIMIT';
Replaces the YYLIMIT placeholder with the specified identifier.
re2c:define:YYMARKER = 'YYMARKER';
Replaces the YYMARKER placeholder with the specified identifier.
re2c:define:YYMTAGN = 'YYMTAGN';
Replaces YYMTAGN identifier with the specified string.
re2c:define:YYMTAGP = 'YYMTAGP';
Replaces YYMTAGP identifier with the specified string.
re2c:define:YYMTAGPD = 'YYMTAGPD';
Replaces YYMTAGPD identifier with the specified string.
re2c:define:YYPEEK = 'YYPEEK';
Replaces YYPEEK identifier with the specified string.
re2c:define:YYRESTORECTX = 'YYRESTORECTX';
Replaces YYRESTORECTX identifier with the specified string.
re2c:define:YYRESTORE = 'YYRESTORE';
Replaces YYRESTORE identifier with the specified string.
re2c:define:YYRESTORETAG = 'YYRESTORETAG';
Replaces YYRESTORETAG identifier with the specified string.
re2c:define:YYSETCONDITION@cond = '@@';
Any occurrence of this text inside of YYSETCONDITION will be replaced with the
actual argument.
re2c:define:YYSETCONDITION:naked = 0;
Controls the argument in parentheses and the semicolon after YYSETCONDITION. If
non-zero, both the argument and the semicolon are omitted. If zero, both the
argument and the semicolon are generated.
re2c:define:YYSETCONDITION = 'YYSETCONDITION';
Substitution for YYSETCONDITION. By default re2c generates an argument in
parentheses followed by semicolon after YYSETCONDITION. If you need to make
YYSETCONDITION an arbitrary statement rather than a call, set
re2c:define:YYSETCONDITION:naked to non-zero.
re2c:define:YYSETSTATE:naked = 0;
Controls the argument in parentheses and the semicolon after YYSETSTATE. If
non-zero, both argument and the semicolon are omitted. If zero, both the argument
and the semicolon are generated.
re2c:define:YYSETSTATE@state = '@@';
Any occurrence of this text inside of YYSETSTATE will be replaced with the actual
argument.
re2c:define:YYSETSTATE = 'YYSETSTATE';
Substitution for YYSETSTATE. By default re2c generates an argument in parentheses
followed by a semicolon after YYSETSTATE. If you need to make YYSETSTATE an
arbitrary statement rather than a call, set re2c:define:YYSETSTATE:naked to
non-zero.
re2c:define:YYSKIP = 'YYSKIP';
Replaces YYSKIP identifier with the specified string.
re2c:define:YYSTAGN = 'YYSTAGN';
Replaces YYSTAGN identifier with the specified string.
re2c:define:YYSTAGP = 'YYSTAGP';
Replaces YYSTAGP identifier with the specified string.
re2c:define:YYSTAGPD = 'YYSTAGPD';
Replaces YYSTAGPD identifier with the specified string.
re2c:eof = -1;
Specifies the sentinel symbol used with EOF rule $ to check for the end of input in
the generated lexer. Default value is -1 (EOF rule is not used). Other possible
values include all valid code units. Only decimal numbers are recognized.
re2c:sentinel = -1;
Specifies the sentinel symbol used with the sentinel method of checking for the end
of input in the generated lexer (the case when when bounds checking is disabled
with re2c:yyfill:enable = 0; and EOF rule $ is not used). This configuration does
not affect code generation. It is used by re2c to verify that the sentinel symbol
is not allowed in the middle of the rule, and thus prevent possible reads past the
end of buffer and crashes in the generated lexer. Default value is -1: in this case
re2c assumes that the sentinel symbol is 0 (which is by far the most common case).
Other possible values include all valid code units. Only decimal numbers are
recognized.
re2c:flags:8 or re2c:flags:utf-8
Same as -8 --utf-8 command-line option.
re2c:flags:b or re2c:flags:bit-vectors
Same as -b --bit-vectors command-line option.
re2c:flags:case-insensitive = 0;
Same as --case-insensitive command-line option.
re2c:flags:case-inverted = 0;
Same as --case-inverted command-line option.
re2c:flags:d or re2c:flags:debug-output
Same as -d --debug-output command-line option.
re2c:flags:dfa-minimization = 'moore';
Same as --dfa-minimization command-line option.
re2c:flags:eager-skip = 0;
Same as --eager-skip command-line option.
re2c:flags:e or re2c:flags:ecb
Same as -e --ecb command-line option.
re2c:flags:empty-class = 'match-empty';
Same as --empty-class command-line option.
re2c:flags:encoding-policy = 'ignore';
Same as --encoding-policy command-line option.
re2c:flags:g or re2c:flags:computed-gotos
Same as -g --computed-gotos command-line option.
re2c:flags:i or re2c:flags:no-debug-info
Same as -i --no-debug-info command-line option.
re2c:flags:input = 'default';
Same as --input command-line option.
re2c:flags:lookahead = 1;
Same as inverted --no-lookahead command-line option.
re2c:flags:optimize-tags = 1;
Same as inverted --no-optimize-tags command-line option.
re2c:flags:P or re2c:flags:posix-captures
Same as -P --posix-captures command-line option.
re2c:flags:s or re2c:flags:nested-ifs
Same as -s --nested-ifs command-line option.
re2c:flags:T or re2c:flags:tags
Same as -T --tags command-line option.
re2c:flags:u or re2c:flags:unicode
Same as -u --unicode command-line option.
re2c:flags:w or re2c:flags:wide-chars
Same as -w --wide-chars command-line option.
re2c:flags:x or re2c:flags:utf-16
Same as -x --utf-16 command-line option.
re2c:indent:string = '\t';
Specifies the string to use for indentation. Requires a string that contains only
whitespace (unless you need something else for external tools). The easiest way to
specify spaces is to enclose them in single or double quotes. If you do not want
any indentation at all, you can set this to ''.
re2c:indent:top = 0;
Specifies the minimum amount of indentation to use. Requires a numeric value
greater than or equal to zero.
re2c:labelprefix = 'yy';
Allows one to change the prefix of numbered labels. The default is yy. Can be set
any string that is valid in a label name.
re2c:label:yyFillLabel = 'yyFillLabel';
Overrides the name of the yyFillLabel label.
re2c:label:yyNext = 'yyNext';
Overrides the name of the yyNext label.
re2c:startlabel = 0;
If set to a non zero integer, then the start label of the next scanner block will
be generated even if it isn't used by the scanner itself. Otherwise, the normal
yy0-like start label is only generated if needed. If set to a text value, then a
label with that text will be generated regardless of whether the normal start label
is used or not. This setting is reset to 0 after a start label has been generated.
re2c:state:abort = 0;
When not zero and the -f --storable-state switch is active, then the YYGETSTATE
block will contain a default case that aborts and a -1 case will be used for
initialization.
re2c:state:nextlabel = 0;
Used when -f --storable-state is active to control whether the YYGETSTATE block is
followed by a yyNext: label line. Instead of using yyNext, you can usually also
use configuration startlabel to force a specific start label or default to yy0 as a
start label. Instead of using a dedicated label, it is often better to separate the
YYGETSTATE code from the actual scanner code by placing a /*!getstate:re2c*/
comment.
re2c:tags:expression = '@@';
Allows one to customize the way re2c addresses tag variables: by default it emits
expressions of the form yyt<N>, but this might be inconvenient if tag variables are
defined as fields in a struct, or for any other reason require special accessors.
For example, setting re2c:tags:expression = p->@@ will result in p->yyt<N>.
re2c:tags:prefix = 'yyt';
Allows one to override prefix of tag variables.
re2c:variable:yyaccept = yyaccept;
Overrides the name of the yyaccept variable.
re2c:variable:yybm = 'yybm';
Overrides the name of the yybm variable.
re2c:variable:yych = 'yych';
Overrides the name of the yych variable.
re2c:variable:yyctable = 'yyctable';
When both -c --conditions and -g --computed-gotos are active, re2c will use this
variable to generate a static jump table for YYGETCONDITION.
re2c:variable:yystable = 'yystable';
Deprecated.
re2c:variable:yytarget = 'yytarget';
Overrides the name of the yytarget variable.
re2c:yybm:hex = 0;
If set to zero, a decimal table will be used. Otherwise, a hexadecimal table will
be generated.
re2c:yych:conversion = 0;
When this setting is non zero, re2c automatically generates conversion code
whenever yych gets read. In this case, the type must be defined using
re2c:define:YYCTYPE.
re2c:yych:emit = 1;
Set this to zero to suppress the generation of yych.
re2c:yyfill:check = 1;
This can be set to 0 to suppress the generations of YYCURSOR and YYLIMIT based
precondition checks. This option is useful when YYLIMIT + YYMAXFILL is always
accessible.
re2c:yyfill:enable = 1;
Set this to zero to suppress the generation of YYFILL (n). When using this, be sure
to verify that the generated scanner does not read beyond the available input, as
allowing such behavior might introduce severe security issues to your programs.
re2c:yyfill:parameter = 1;
Controls the argument in the parentheses that follow YYFILL. If zero, the argument
is omitted. If non-zero, the argument is generated unless re2c:define:YYFILL:naked
is set to non-zero.
EOF HANDLING
Re2c provides a number of ways to handle end-of-input situation. Which way to use depends
on the complexity of regular expressions, performance considerations, the need for input
buffering and various other factors. EOF handling is probably the most complex part of
re2c user interface --- it definitely requires a bit of understanding of how the generated
lexer works. But in return is allows the user to customize lexer for a particular
environment and avoid the unnecessary overhead of generic methods when a simpler method is
sufficient. Roughly speaking, there are four main methods:
• using sentinel symbol (simple and efficient, but limited)
• bounds checking with padding (generic, but complex)
• EOF rule: a combination of sentinel symbol and bounds checking (generic and simple, can
be more or less efficient than bounds checking with padding depending on the grammar)
• using generic API (user-defined, so may be incorrect ;])
Using sentinel symbol
This is the simplest and the most efficient method. It is applicable in cases when the
input is small enough to fit into a continuous memory buffer and there is a natural
"sentinel" symbol --- a code unit that is not allowed by any of the regular expressions in
grammar (except possibly as a terminating character). Sentinel symbol never appears in
well-formed input, therefore it can be appended at the end of input and used as a stop
signal by the lexer. A good example of such input is a null-terminated C-string, provided
that the grammar does not allow NULL in the middle of lexemes. Sentinel method is very
efficient, because the lexer does not need to perform any additional checks for the end of
input --- it comes naturally as a part of processing the next character. It is very
important that the sentinel symbol is not allowed in the middle of the rule --- otherwise
on some inputs the lexer may read past the end of buffer and crash or cause memory
corruption. Re2c verifies this automatically. Use re2c:sentinel configuration to specify
which sentinel symbol is used.
Below is an example of using sentinel method. Configuration re2c:yyfill:enable = 0;
suppresses generation of end-of-input checks and YYFILL calls.
#include <assert.h>
static int lex(const char *YYCURSOR)
{
int count = 0;
loop:
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
* { return -1; }
[\x00] { return count; }
[a-z]+ { ++count; goto loop; }
[ ]+ { goto loop; }
*/
}
int main()
{
assert(lex("") == 0);
assert(lex("one two three") == 3);
assert(lex("one two 123?") == -1);
return 0;
}
Bounds checking with padding
Bounds checking is a generic method: it can be used with any input grammar. The basic
idea is simple: we need to check for the end of input before reading the next input
character. However, if implemented in a straightforward way, this would be quite
inefficient: checking on each input character would cause a major slowdown. Re2c avoids
slowdown by generating checks only in certain key states of the lexer, and letting it run
without checks in-between the key states. More precisely, re2c computes strongly
connected components (SCCs) of the underlying DFA (which roughly correspond to loops), and
generates only a few checks per each SCC (usually just one, but in general enough to make
the SCC acyclic). The check is of the form (YYLIMIT - YYCURSOR) < n, where n is the
maximal length of a simple path in the corresponding SCC. If this condiiton is true, the
lexer calls YYFILL(n), which must either supply at least n input characters, or do not
return. When the lexer continues after the check, it is certain that the next n characters
can be read safely without checks.
This approach reduces the number of checks significantly (and makes the lexer much faster
as a result), but it has a downside. Since the lexer checks for multiple characters at
once, it may end up in a situation when there are a few remaining input characters (less
than n) corresponding to a short path in the SCC, but the lexer cannot proceed because of
the check, and YYFILL cannot supply more character because it is the end of input. To
solve this problem, re2c requires that additional padding consisting of fake characters is
appended at the end of input. The length of padding should be YYMAXFILL, which equals to
the maximum n parameter to YYFILL and must be generated by re2c using /*!max:re2c*/
directive. The fake characters should not form a valid lexeme suffix, otherwise the lexer
may be fooled into matching a fake lexeme. Usually it's a good idea to use NULL characters
for padding.
Below is an example of using bounds checking with padding. Note that the grammar rule for
single-quoted strings allows arbitrary symbols in the middle of lexeme, so there is no
natural sentinel in the grammar. Strings like "aha\0ha" are perfectly valid, but
ill-formed strings like "aha\0 are also possible and shouldn’t crash the lexer. In this
example we do not use buffer refilling, therefore YYFILL definition simply returns an
error. Note that YYFILL will only be called after the lexer reaches padding, because only
then will the check condition be satisfied.
#include <assert.h>
#include <stdlib.h>
#include <string.h>
/*!max:re2c*/
static int lex(const char *str)
{
const size_t len = strlen(str);
char *buf = malloc(len + YYMAXFILL);
memcpy(buf, str, len);
memset(buf + len, 0, YYMAXFILL);
const char *YYCURSOR = buf;
const char *YYLIMIT = buf + len + YYMAXFILL;
int count = 0;
loop:
/*!re2c
re2c:define:YYCTYPE = char;
re2c:define:YYFILL:naked = 1;
re2c:define:YYFILL = "goto error;";
* { goto error; }
[\x00] { if (YYCURSOR == YYLIMIT) goto end; else goto error; }
[a-z]+ { ++count; goto loop; }
['] ([^'] | [\\]['])* ['] { ++count; goto loop; }
[ ]+ { goto loop; }
*/
error:
count = -1;
end:
free(buf);
return count;
}
int main()
{
assert(lex("") == 0);
assert(lex("one two three") == 3);
assert(lex("one two 123?") == -1);
assert(lex("one 'two' 'th\\'ree' '123?' ''") == 5);
assert(lex("one 'two' 'three") == -1);
return 0;
}
EOF rule
EOF rule $ was introduced in version 1.2. It is a hybrid approach that tries to take the
best of both worlds: simplicity and efficiency of the sentinel method combined with the
generality of bounds-checking method. The idea is to appoint an arbitrary symbol to be the
sentinel, and only perform further bounds checking if the sentinel symbol matches (more
precisely, if the symbol class that contains it matches). The check is of the form YYLIMIT
<= YYCURSOR. If this condition is not satisfied, then the sentinel is just an ordinary
input character and the lexer continues. Otherwise this is a real sentinel, and the lexer
calls YYFILL(). If YYFILL returns zero, the lexer assumes that it has more input and tries
to re-match. Otherwise YYFILL returns non-zero and the lexer knows that it has reached the
end of input. At this point there are three possibilities. First, it might have already
matched a shorter lexeme --- in this case it just rolls back to the last accepting state.
Second, it might have consumed some characters, but failed to match --- in this case it
falls back to default rule *. Finally, it might be in the initial state --- in this (and
only this!) case it matches EOF rule $.
Below is an example of using EOF rule. Configuration re2c:yyfill:enable = 0; suppresses
generation of YYFILL calls (but not the bounds checks).
#include <assert.h>
#include <string.h>
static int lex(const char *str)
{
const char *YYCURSOR = str;
const char *YYLIMIT = str + strlen(str);
int count = 0;
loop:
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
re2c:eof = 0;
* { return -1; }
$ { return count; }
[a-z]+ { ++count; goto loop; }
['] ([^'] | [\\]['])* ['] { ++count; goto loop; }
[ ]+ { goto loop; }
*/
}
int main()
{
assert(lex("") == 0);
assert(lex("one two three") == 3);
assert(lex("one two 123?") == -1);
assert(lex("one 'two' 'th\\'ree' '123?' ''") == 5);
assert(lex("one 'two' 'three") == -1);
return 0;
}
Using generic API
Generic API can be used with any of the above methods. It also allows one to use a
user-defined method by placing EOF checks in one of the basic primitives. Usually this is
either YYSKIP (the check is performed when advancing to the next input character), or
YYPEEK (the check is performed when reading the next input character). The resulting
methods are inefficient, as they check on each input character. However, they can be
useful in cases when the input cannot be buffered or padded and does not contain a
sentinel character at the end. One should be cautious when using such ad-hoc methods, as
it is easy to overlook some corner cases and come up with a method that only partially
works. Also it should be noted that not everything can be expressed via generic API: for
example, it is impossible to reimplement the way EOF rule works (in particular, it is
impossible to re-match the character after successful YYFILL).
Below is an example of using YYSKIP to perform bounds checking without padding. YYFILL
generation is suppressed using re2c:yyfill:enable = 0; configuration. Note that if the
grammar was more complex, this method might not work in case when two rules overlap and
EOF check fails after a shorter lexeme has already been matched (as it happens in our
example, there are no overlapping rules).
#include <assert.h>
#include <string.h>
#define YYPEEK() *cur
#define YYSKIP() if (++cur > lim) return -1
static int lex(const char *str)
{
const char *cur = str;
const char *lim = str + strlen(str) + 1;
int count = 0;
loop:
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
re2c:flags:input = custom;
* { return -1; }
[\x00] { return cur == lim ? count : -1; }
[a-z]+ { ++count; goto loop; }
['] ([^'] | [\\]['])* ['] { ++count; goto loop; }
[ ]+ { goto loop; }
*/
}
int main()
{
assert(lex("") == 0);
assert(lex("one two three") == 3);
assert(lex("one two 123?") == -1);
assert(lex("one 'two' 'th\\'ree' '123?' ''") == 5);
assert(lex("one 'two' 'three") == -1);
return 0;
}
BUFFER REFILLING
The need for buffering arises when the input cannot be mapped in memory all at once:
either it is too large, or it comes in a streaming fashion (like reading from a socket).
The usual technique in such cases is to allocate a fixed-sized memory buffer and process
input in chunks that fit into the buffer. When the current chunk is processed, it is moved
out and new data is moved in. In practice it is somewhat more complex, because lexer state
consists not of a single input position, but a set of interrelated posiitons:
• cursor: the next input character to be read (YYCURSOR in default API or YYSKIP/YYPEEK in
generic API)
• limit: the position after the last available input character (YYLIMIT in default API,
implicitly handled by YYLESSTHAN in generic API)
• marker: the position of the most recent match, if any (YYMARKER in default API or
YYBACKUP/YYRESTORE in generic API)
• token: the start of the current lexeme (implicit in re2c API, as it is not needed for
the normal lexer operation and can be defined and updated by the user)
• context marker: the position of the trailing context (YYCTXMARKER in default API or
YYBACKUPCTX/YYRESTORECTX in generic API)
• tag variables: submatch positions (defined with /*!stags:re2c*/ and /*!mtags:re2c*/
directives and YYSTAGP/YYSTAGN/YYMTAGP/YYMTAGN in generic API)
Not all these are used in every case, but if used, they must be updated by YYFILL. All
active positions are contained in the segment between token and cursor, therefore
everything between buffer start and token can be discarded, the segment from token and up
to limit should be moved to the beginning of buffer, and the free space at the end of
buffer should be filled with new data. In order to avoid frequent YYFILL calls it is best
to fill in as many input characters as possible (even though fewer characters might
suffice to resume the lexer). The details of YYFILL implementation are slightly different
depending on which EOF handling method is used: the case of EOF rule is somewhat simpler
than the case of bounds-checking with padding. Also note that if -f --storable-state
option is used, YYFILL has slightly different semantics (desrbed in the section about
storable state).
YYFILL with EOF rule
If EOF rule is used, YYFILL is a function-like primitive that accepts no arguments and
returns a value which is checked against zero. YYFILL invocation is triggered by condition
YYLIMIT <= YYCURSOR in default API and YYLESSTHAN() in generic API. A non-zero return
value means that YYFILL has failed. A successful YYFILL call must supply at least one
character and adjust input positions accordingly. Limit must always be set to one after
the last input position in buffer, and the character at the limit position must be the
sentinel symbol specified by re2c:eof configuration. The pictures below show the relative
locations of input positions in buffer before and after YYFILL call (sentinel symbol is
marked with #, and the second picture shows the case when there is not enough input to
fill the whole buffer).
<-- shift -->
>-A------------B---------C-------------D#-----------E->
buffer token marker limit,
cursor
>-A------------B---------C-------------D------------E#->
buffer, marker cursor limit
token
<-- shift -->
>-A------------B---------C-------------D#--E (EOF)
buffer token marker limit,
cursor
>-A------------B---------C-------------D---E#........
buffer, marker cursor limit
token
Here is an example of a program that reads input file input.txt in chunks of 4096 bytes
and uses EOF rule.
#include <stdio.h>
#include <string.h>
#define SIZE 4096
typedef struct {
FILE *file;
char buf[SIZE + 1], *lim, *cur, *tok;
int eof;
} Input;
static int fill(Input *in)
{
if (in->eof) {
return 1;
}
const size_t free = in->tok - in->buf;
if (free < 1) {
return 2;
}
memmove(in->buf, in->tok, in->lim - in->tok);
in->lim -= free;
in->cur -= free;
in->tok -= free;
in->lim += fread(in->lim, 1, free, in->file);
in->lim[0] = 0;
in->eof |= in->lim < in->buf + SIZE;
return 0;
}
static void init(Input *in, FILE *file)
{
in->file = file;
in->cur = in->tok = in->lim = in->buf + SIZE;
in->eof = 0;
fill(in);
}
#define YYFILL() fill(in)
static int lex(Input *in)
{
int count = 0;
loop:
in->tok = in->cur;
/*!re2c
re2c:define:YYCTYPE = char;
re2c:define:YYCURSOR = in->cur;
re2c:define:YYLIMIT = in->lim;
re2c:eof = 0;
* { return -1; }
$ { return count; }
[a-z]+ { ++count; goto loop; }
['] ([^'] | [\\]['])* ['] { ++count; goto loop; }
[ ]+ { goto loop; }
*/
}
int main()
{
FILE *f = fopen("input.txt", "rb");
if (!f) return 1;
Input in;
init(&in, f);
printf("count: %d\n", lex(&in));
fclose(f);
return 0;
}
YYFILL with padding
In the default case (when EOF rule is not used) YYFILL is a function-like primitive that
accepts a single argument and does not return any value. YYFILL invocation is triggered
by condition (YYLIMIT - YYCURSOR) < n in default API and YYLESSTHAN(n) in generic API. The
argument passed to YYFILL is the minimal number of characters that must be supplied. If it
fails to do so, YYFILL must not return to the lexer (for that reason it is best
implemented as a macro that returns from the calling function on failure). In case of a
successful YYFILL invocation the limit position must be set either to one after the last
input position in buffer, or to the end of YYMAXFILL padding (in case YYFILL has
successfully read at least n characters, but not enough to fill the entire buffer). The
pictures below show the relative locations of input positions in buffer before and after
YYFILL invocation (YYMAXFILL padding on the second picture is marked with # symbols).
<-- shift --> <-- need -->
>-A------------B---------C-----D-------E---F--------G->
buffer token marker cursor limit
>-A------------B---------C-----D-------E---F--------G->
buffer, marker cursor limit
token
<-- shift --> <-- need -->
>-A------------B---------C-----D-------E-F (EOF)
buffer token marker cursor limit
>-A------------B---------C-----D-------E-F###############
buffer, marker cursor limit
token <- YYMAXFILL ->
Here is an example of a program that reads input file input.txt in chunks of 4096 bytes
and uses bounds-checking with padding.
#include <stdio.h>
#include <string.h>
/*!max:re2c*/
#define SIZE 4096
typedef struct {
FILE *file;
char buf[SIZE + YYMAXFILL], *lim, *cur, *tok;
int eof;
} Input;
static int fill(Input *in, size_t need)
{
if (in->eof) {
return 1;
}
const size_t free = in->tok - in->buf;
if (free < need) {
return 2;
}
memmove(in->buf, in->tok, in->lim - in->tok);
in->lim -= free;
in->cur -= free;
in->tok -= free;
in->lim += fread(in->lim, 1, free, in->file);
if (in->lim < in->buf + SIZE) {
in->eof = 1;
memset(in->lim, 0, YYMAXFILL);
in->lim += YYMAXFILL;
}
return 0;
}
static void init(Input *in, FILE *file)
{
in->file = file;
in->cur = in->tok = in->lim = in->buf + SIZE;
in->eof = 0;
fill(in, 1);
}
#define YYFILL(n) if (fill(in, n) != 0) return -1
static int lex(Input *in)
{
int count = 0;
loop:
in->tok = in->cur;
/*!re2c
re2c:define:YYCTYPE = char;
re2c:define:YYCURSOR = in->cur;
re2c:define:YYLIMIT = in->lim;
* { return -1; }
[\x00] { return (YYMAXFILL == in->lim - in->tok) ? count : -1; }
[a-z]+ { ++count; goto loop; }
['] ([^'] | [\\]['])* ['] { ++count; goto loop; }
[ ]+ { goto loop; }
*/
}
int main()
{
FILE *f = fopen("input.txt", "rb");
if (!f) return 1;
Input in;
init(&in, f);
printf("count: %d\n", lex(&in));
fclose(f);
return 0;
}
INCLUDE FILES
Re2c allows one to include other files using directive /*!include:re2c FILE */, where FILE
is the name of file to be included. Re2c looks for included files in the directory of the
including file and in include locations, which can be specified with -I option. Re2c
include directive works in the same way as C/C++ #include: the contents of FILE are
copy-pasted verbatim in place of the directive. Include files may have further includes of
their own. Re2c provides some predefined include files that can be found in the include/
subdirectory of the project. These files contain definitions that can be useful to other
projects (such as Unicode categories) and form something like a standard library for re2c.
Here is an example of using include files:
System Message: WARNING/2 (doc/manual/includes/includes.rst_:, line 15)
Cannot analyze code. Pygments package not found.
.. code-block:: cpp
// definitions.re
/*!re2c
alpha = [a-zA-Z];
digit = [0-9];
*/
// main.re
/*!include:re2c "definitions.re" */
int lex(const char *YYCURSOR)
{
const char *YYMARKER;
/*!re2c
alpha { return 1; }
digit { return 2; }
* { return 0; }
*/
}
HEADER FILES
Re2c allows one to generate header file from the input .re file using option -t
--type-header (or the corresponding configurations) and directives /*!header:re2c:on*/ and
/*!header:re2c:off*/. The first directive marks the beginning of header file, and the
second directive marks the end of it. Everything between these directives is processed by
re2c, and the generated code is written to the file specified by the -t --type-header
option (or stdout if this option was not used). Autogenerated header file may be needed in
cases when re2c is used to generate definitions of constants, variables and structs that
must be visible from other translation units.
Here is an example of generating a header that contains definitions of YYMAXFILL and lexer
state with tag variables. Note that YYMAXFILL and tag variables depend on the grammar in
the .re file and cannot be hard-coded.
System Message: WARNING/2 (doc/manual/headers/headers.rst_:, line 16)
Cannot analyze code. Pygments package not found.
.. code-block:: cpp
/*!header:re2c:on*/
/*!max:re2c*/
struct State {
char buffer[4096 + YYMAXFILL], *cursor, *marker, *limit;
/*!stags:re2c format = "char *@@; "; */
};
/*!header:re2c:off*/
#include "lex.h"
#define YYCTYPE char
#define YYCURSOR state->cursor
#define YYMARKER state->marker
#define YYLIMIT state->limit
#define YYFILL(n) return 2
int lex(State *state)
{
char *x, *y;
/*!re2c
re2c:tags:expression = state->@@;
re2c:flags:t = lex.h;
"a"* @x "b"* @y "c"* { return 0; }
* { return 1; }
*/
}
The generated header looks like this:
System Message: WARNING/2 (doc/manual/headers/headers.rst_:, line 46)
Cannot analyze code. Pygments package not found.
.. code-block:: cpp
#define YYMAXFILL 1
struct State {
char buffer[4096 + YYMAXFILL], *cursor, *marker, *limit;
char *yyt1; char *yyt2;
};
SUBMATCH EXTRACTION
Re2c has two options for submatch extraction.
The first option is -T --tags. With this option one can use standalone tags of the form
@stag and #mtag, where stag and mtag are arbitrary used-defined names. Tags can be used
anywhere inside of a regular expression; semantically they are just position markers. Tags
of the form @stag are called s-tags: they denote a single submatch value (the last input
position where this tag matched). Tags of the form #mtag are called m-tags: they denote
multiple submatch values (the whole history of repetitions of this tag). All tags should
be defined by the user as variables with the corresponding names. With standalone tags
re2c uses leftmost greedy disambiguation: submatch positions correspond to the leftmost
matching path through the regular expression.
The second option is -P --posix-captures: it enables POSIX-compliant capturing groups. In
this mode parentheses in regular expressions denote the beginning and the end of capturing
groups; the whole regular expression is group number zero. The number of groups for the
matching rule is stored in a variable yynmatch, and submatch results are stored in
yypmatch array. Both yynmatch and yypmatch should be defined by the user, and yypmatch
size must be at least [yynmatch * 2]. Re2c provides a directive /*!maxnmatch:re2c*/ that
defines YYMAXNMATCH: a constant equal to the maximal value of yynmatch among all rules.
Note that re2c implements POSIX-compliant disambiguation: each subexpression matches as
long as possible, and subexpressions that start earlier in regular expression have
priority over those starting later. Capturing groups are translated into s-tags under the
hood, therefore we use the word "tag" to describe them as well.
With both -P --posix-captures and T --tags options re2c uses efficient submatch extraction
algorithm described in the Tagged Deterministic Finite Automata with Lookahead paper. The
overhead on submatch extraction in the generated lexer grows with the number of tags ---
if this number is moderate, the overhead is barely noticeable. In the lexer tags are
implemented using a number of tag variables generated by re2c. There is no one-to-one
correspondence between tag variables and tags: a single variable may be reused for
different tags, and one tag may require multiple variables to hold all its ambiguous
values. Eventually ambiguity is resolved, and only one final variable per tag survives.
When a rule matches, all its tags are set to the values of the corresponding tag
variables. The exact number of tag variables is unknown to the user; this number is
determined by re2c. However, tag variables should be defined by the user as a part of the
lexer state and updated by YYFILL, therefore re2c provides directives /*!stags:re2c*/ and
/*!mtags:re2c*/ that can be used to declare, initialize and manipulate tag variables.
These directives have two optional configurations: format = "@@"; (specifies the template
where @@ is substituted with the name of each tag variable), and separator = "";
(specifies the piece of code used to join the generated pieces for different tag
variables).
S-tags support the following operations:
• save input position to an s-tag: t = YYCURSOR with default API or a user-defined
operation YYSTAGP(t) with generic API
• save default value to an s-tag: t = NULL with default API or a user-defined operation
YYSTAGN(t) with generic API
• copy one s-tag to another: t1 = t2
M-tags support the following operations:
• append input position to an m-tag: a user-defined operation YYMTAGP(t) with both default
and generic API
• append default value to an m-tag: a user-defined operation YYMTAGN(t) with both default
and generic API
• copy one m-tag to another: t1 = t2
S-tags can be implemented as scalar values (pointers or offsets). M-tags need a more
complex representation, as they need to store a sequence of tag values. The most naive and
inefficient representation of an m-tag is a list (array, vector) of tag values; a more
efficient representation is to store all m-tags in a prefix-tree represented as array of
nodes (v, p), where v is tag value and p is a pointer to parent node.
Here is an example of using s-tags to parse an IPv4 address.
#include <assert.h>
#include <stdint.h>
static uint32_t num(const char *s, const char *e)
{
uint32_t n = 0;
for (; s < e; ++s) n = n * 10 + (*s - '0');
return n;
}
static uint32_t lex(const char *YYCURSOR)
{
const char *YYMARKER, *o1, *o2, *o3, *o4;
/*!stags:re2c format = 'const char *@@;'; */
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
re2c:flags:tags = 1;
oct = [0-9]{1,3};
dot = [.];
@o1 oct dot @o2 oct dot @o3 oct dot @o4 oct {
return num(o4, YYCURSOR)
+ (num(o3, o4 - 1) << 8)
+ (num(o2, o3 - 1) << 16)
+ (num(o1, o2 - 1) << 24);
}
* { return 0; }
*/
}
int main()
{
assert(lex("1.2.3.4") == 0x01020304);
assert(lex("127.0.0.1") == 0x7f000001);
assert(lex("255.255.255.255") == 0xffffffff);
return 0;
}
Here is an example of using POSIX capturing groups to parse an IPv4 address.
#include <assert.h>
#include <stdint.h>
static uint32_t num(const char *s, const char *e)
{
uint32_t n = 0;
for (; s < e; ++s) n = n * 10 + (*s - '0');
return n;
}
/*!maxnmatch:re2c*/
static uint32_t lex(const char *YYCURSOR)
{
const char *YYMARKER;
const char *yypmatch[YYMAXNMATCH];
uint32_t yynmatch;
/*!stags:re2c format = 'const char *@@;'; */
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
re2c:flags:posix-captures = 1;
oct = [0-9]{1,3};
dot = [.];
(oct) dot (oct) dot (oct) dot (oct) {
return num(yypmatch[8], yypmatch[9])
+ (num(yypmatch[6], yypmatch[7]) << 8)
+ (num(yypmatch[4], yypmatch[5]) << 16)
+ (num(yypmatch[2], yypmatch[3]) << 24);
}
* { return 0; }
*/
}
int main()
{
assert(lex("1.2.3.4") == 0x01020304);
assert(lex("127.0.0.1") == 0x7f000001);
assert(lex("255.255.255.255") == 0xffffffff);
return 0;
}
Here is an example of using m-tags to parse a semicolon-separated sequence of words (C++).
Tag variables are stored in a tree that is packed in a vector.
#include <assert.h>
#include <vector>
#include <string>
static const int ROOT = -1;
struct Mtag {
int pred;
const char *tag;
};
typedef std::vector<Mtag> MtagTree;
typedef std::vector<std::string> Words;
static void mtag(int *pt, const char *t, MtagTree *tree)
{
Mtag m = {*pt, t};
*pt = (int)tree->size();
tree->push_back(m);
}
static void unfold(const MtagTree &tree, int x, int y, Words &words)
{
if (x == ROOT) return;
unfold(tree, tree[x].pred, tree[y].pred, words);
const char *px = tree[x].tag, *py = tree[y].tag;
words.push_back(std::string(px, py - px));
}
#define YYMTAGP(t) mtag(&t, YYCURSOR, &tree)
#define YYMTAGN(t) mtag(&t, NULL, &tree)
static bool lex(const char *YYCURSOR, Words &words)
{
const char *YYMARKER;
/*!mtags:re2c format = "int @@ = ROOT;"; */
MtagTree tree;
int x, y;
/*!re2c
re2c:define:YYCTYPE = char;
re2c:yyfill:enable = 0;
re2c:flags:tags = 1;
(#x [a-zA-Z0-9_]+ #y [;])+ {
words.clear();
unfold(tree, x, y, words);
return true;
}
* { return false; }
*/
}
int main()
{
Words w;
assert(lex("one;tw0;three;", w) && w == Words({"one", "tw0", "three"}));
return 0;
}
STORABLE STATE
With -f --storable-state option re2c generates a lexer that can store its current state,
return to the caller, and later resume operations exactly where it left off. The default
mode of operation in re2c is a "pull" model, in which the lexer "pulls" more input
whenever it needs it. This may be unacceptable in cases when the input becomes available
piece by piece (for example, if the lexer is invoked by the parser, or if the lexer
program communicates via a socket protocol with some other program that must wait for a
reply from the lexer before it transmits the next message). Storable state feature is
intended exactly for such cases: it allows one to generate lexers that work in a "push"
model. When the lexer needs more input, it stores its state and returns to the caller.
Later, when more input becomes available, the caller resumes the lexer exactly where it
stopped. There are a few changes necessary compared to the "pull" model:
• Define YYSETSTATE() and YYGETSTATE(state) promitives.
• Define yych, yyaccept and state variables as a part of persistent lexer state. The state
variable should be initialized to -1.
• YYFILL should return to the outer program instead of trying to supply more input. Return
code should indicate that lexer needs more input.
• The outer program should recognize situations when lexer needs more input and respond
appropriately.
• Use /*!getstate:re2c*/ directive if it is necessary to execute any code before entering
the lexer.
• Use configurations state:abort and state:nextlabel to further tweak the generated code.
Here is an example of a "push"-model lexer that reads input from stdin and expects a
sequence of words separated by spaces and newlines. The lexer loops forever, waiting for
more input. It can be terminated by sending a special EOF token --- a word "stop", in
which case the lexer terminates successfully and prints the number of words it has seen.
Abnormal termination happens in case of a syntax error, premature end of input (without
the "stop" word) or in case the buffer is too small to hold a lexeme (for example, if one
of the words exceeds buffer size). Premature end of input happens in case the lexer fails
to read any input while being in the initial state --- this is the only case when EOF rule
matches. Note that the lexer may call YYFILL twice before terminating (and thus require
hitting Ctrl+D a few times). First time YYFILL is called when the lexer expects
continuation of the current greedy lexeme (either a word or a whitespace sequence). If
YYFILL fails, the lexer knows that it has reached the end of the current lexeme and
executes the corresponding semantic action. The action jumps to the beginning of the loop,
the lexer enters the initial state and calls YYFILL once more. If it fails, the lexer
matches EOF rule. (Alternatively EOF rule can be used for termination instead of a special
EOF lexeme.)
#include <assert.h>
#include <stdio.h>
#include <string.h>
#define SIZE 4096
typedef struct {
char buf[SIZE + 1], *lim, *cur, *tok, yych;
unsigned yyaccept;
int state;
} Input;
static void init(Input *in)
{
in->cur = in->tok = in->lim = in->buf + SIZE;
in->lim[0] = 0; // append sentinel symbol
in->yych = 0;
in->yyaccept = 0;
in->state = -1;
}
static int fill(Input *in)
{
const size_t shift = in->tok - in->buf;
const size_t free = SIZE - (in->lim - in->tok);
if (free < 1) return 1; // not enough space in buffer
memmove(in->buf, in->tok, SIZE - shift);
in->lim -= shift;
in->cur -= shift;
in->tok -= shift;
const size_t read = fread(in->lim, 1, free, stdin);
in->lim += read;
in->lim[0] = 0; // append sentinel symbol
return 0;
}
typedef enum {OK, SYNTAX_ERROR, UNEXPECTED_EOF, NEED_MORE_INPUT} Status;
#define YYGETSTATE() in->state
#define YYSETSTATE(s) in->state = s
#define YYFILL() return NEED_MORE_INPUT
static Status lex(Input *in, unsigned *words)
{
/*!getstate:re2c*/
loop:
in->tok = in->cur;
/*!re2c
re2c:define:YYCTYPE = char;
re2c:define:YYCURSOR = in->cur;
re2c:define:YYLIMIT = in->lim;
re2c:variable:yych = in->yych;
re2c:eof = 0;
* { return SYNTAX_ERROR; }
$ { return UNEXPECTED_EOF; }
"stop" { return OK; }
[\n ]+ { goto loop; }
[a-zA-Z]+ { *words = *words + 1; goto loop; }
*/
}
int main()
{
unsigned words = 0;
Input in;
init(&in);
for (;;) {
const Status st = lex(&in, &words);
if (st == OK) {
printf("word count: %u\n", words);
break;
}
else if (st == SYNTAX_ERROR) {
printf("error: unexpected symbol\n");
return 1;
}
else if (st == UNEXPECTED_EOF) {
printf("error: unexpected end of input\n");
return 2;
}
else if (fill(&in) != 0) {
printf("error: not enough space in buffer\n");
return 3;
}
}
return 0;
}
REUSABLE BLOCKS
Reuse mode is enabled with the -r --reusable option. In this mode re2c allows one to reuse
definitions, configurations and rules specified by a /*!rules:re2c*/ block in subsequent
/*!use:re2c*/ blocks. As of re2c-1.2 it is possible to mix such blocks with normal
/*!re2c*/ blocks; prior to that re2c expects a single rules-block followed by use-blocks
(normal blocks are disallowed). Use-blocks can have additional definitions, configurations
and rules: they are merged to those specified by the rules-block. A very common use case
for -r --reusable option is a lexer that supports multiple input encodings: lexer rules
are defined once and reused multiple times with encoding-specific configurations, such as
re2c:flags:utf-8.
Below is an example of a multi-encoding lexer: it reads a phrase with Unicode math symbols
and accepts input either in UTF8 or in UT32. Note that the --input-encoding utf8 option
allows us to write UTF8-encoded symbols in the regular expressions; without this option
re2c would parse them as a plain ASCII byte sequnce (and we would have to use hexadecimal
escape sequences).
#include <assert.h>
#include <stdint.h>
/*!rules:re2c
re2c:yyfill:enable = 0;
"∀x ∃y: p(x, y)" { return 0; }
* { return 1; }
*/
static int lex_utf8(const uint8_t *YYCURSOR)
{
const uint8_t *YYMARKER;
/*!use:re2c
re2c:define:YYCTYPE = uint8_t;
re2c:flags:8 = 1;
*/
}
static int lex_utf32(const uint32_t *YYCURSOR)
{
const uint32_t *YYMARKER;
/*!use:re2c
re2c:define:YYCTYPE = uint32_t;
re2c:flags:8 = 0;
re2c:flags:u = 1;
*/
}
int main()
{
static const uint8_t s8[] = // UTF-8
{ 0xe2, 0x88, 0x80, 0x78, 0x20, 0xe2, 0x88, 0x83, 0x79
, 0x3a, 0x20, 0x70, 0x28, 0x78, 0x2c, 0x20, 0x79, 0x29 };
static const uint32_t s32[] = // UTF32
{ 0x00002200, 0x00000078, 0x00000020, 0x00002203
, 0x00000079, 0x0000003a, 0x00000020, 0x00000070
, 0x00000028, 0x00000078, 0x0000002c, 0x00000020
, 0x00000079, 0x00000029 };
assert(lex_utf8(s8) == 0);
assert(lex_utf32(s32) == 0);
return 0;
}
ENCODING SUPPORT
re2c supports the following encodings: ASCII (default), EBCDIC (-e), UCS-2 (-w), UTF-16
(-x), UTF-32 (-u) and UTF-8 (-8). See also inplace configuration re2c:flags.
The following concepts should be clarified when talking about encodings. A code point is
an abstract number that represents a single symbol. A code unit is the smallest unit of
memory, which is used in the encoded text (it corresponds to one character in the input
stream). One or more code units may be needed to represent a single code point, depending
on the encoding. In a fixed-length encoding, each code point is represented with an equal
number of code units. In variable-length encodings, different code points can be
represented with different number of code units.
• ASCII is a fixed-length encoding. Its code space includes 0x100 code points, from 0 to
0xFF. A code point is represented with exactly one 1-byte code unit, which has the same
value as the code point. The size of YYCTYPE must be 1 byte.
• EBCDIC is a fixed-length encoding. Its code space includes 0x100 code points, from 0 to
0xFF. A code point is represented with exactly one 1-byte code unit, which has the same
value as the code point. The size of YYCTYPE must be 1 byte.
• UCS-2 is a fixed-length encoding. Its code space includes 0x10000 code points, from 0 to
0xFFFF. One code point is represented with exactly one 2-byte code unit, which has the
same value as the code point. The size of YYCTYPE must be 2 bytes.
• UTF-16 is a variable-length encoding. Its code space includes all Unicode code points,
from 0 to 0xD7FF and from 0xE000 to 0x10FFFF. One code point is represented with one or
two 2-byte code units. The size of YYCTYPE must be 2 bytes.
• UTF-32 is a fixed-length encoding. Its code space includes all Unicode code points, from
0 to 0xD7FF and from 0xE000 to 0x10FFFF. One code point is represented with exactly one
4-byte code unit. The size of YYCTYPE must be 4 bytes.
• UTF-8 is a variable-length encoding. Its code space includes all Unicode code points,
from 0 to 0xD7FF and from 0xE000 to 0x10FFFF. One code point is represented with a
sequence of one, two, three, or four 1-byte code units. The size of YYCTYPE must be 1
byte.
In Unicode, values from range 0xD800 to 0xDFFF (surrogates) are not valid Unicode code
points. Any encoded sequence of code units that would map to Unicode code points in the
range 0xD800-0xDFFF, is ill-formed. The user can control how re2c treats such ill-formed
sequences with the --encoding-policy <policy> switch.
For some encodings, there are code units that never occur in a valid encoded stream (e.g.,
0xFF byte in UTF-8). If the generated scanner must check for invalid input, the only
correct way to do so is to use the default rule (*). Note that the full range rule ([^])
won't catch invalid code units when a variable-length encoding is used ([^] means "any
valid code point", whereas the default rule (*) means "any possible code unit").
START CONDITIONS
Conditions are enabled with -c --conditions. This option allows one to encode multiple
interrelated lexers within the same re2c block.
Each lexer corresponds to a single condition. It starts with a label of the form
yyc_name, where name is condition name and yyc prefix can be adjusted with configuration
re2c:condprefix. Different lexers are separated with a comment /*
*********************************** */ which can be adjusted with configuration
re2c:cond:divider.
Furthermore, each condition has a unique identifier of the form yycname, where name is
condition name and yyc prefix can be adjusted with configuration re2c:condenumprefix.
Identifiers have the type YYCONDTYPE and should be generated with /*!types:re2c*/
directive or -t --type-header option. Users shouldn't define these identifiers manually,
as the order of conditions is not specified.
Before all conditions re2c generates entry code that checks the current condition
identifier and transfers control flow to the start label of the active condition. After
matching some rule of this condition, lexer may either transfer control flow back to the
entry code (after executing the associated action and optionally setting another condition
with =>), or use :=> shortcut and transition directly to the start label of another
condition (skipping the action and the entry code). Configuration re2c:cond:goto allows
one to change the default behavior.
Syntactically each rule must be preceded with a list of comma-separated condition names or
a wildcard * enclosed in angle brackets < and >. Wildcard means "any condition" and is
semantically equivalent to listing all condition names. Here regexp is a regular
expression, default refers to the default rule *, and action is a block of C/C++ code.
• <conditions-or-wildcard> regexp-or-default action
• <conditions-or-wildcard> regexp-or-default => condition action
• <conditions-or-wildcard> regexp-or-default :=> condition
Rules with an exclamation mark ! in front of condition list have a special meaning: they
have no regular expression, and the associated action is merged as an entry code to
actions of normal rules. This might be a convenient place to peform a routine task that
is common to all rules.
• <!conditions-or-wildcard> action
Another special form of rules with an empty condition list <> and no regular expression
allows one to specify an "entry condition" that can be used to execute code before
entering the lexer. It is semantically equivalent to a condition with number zero, name 0
and an empty regular expression.
• <> action
• <> => condition action
• <> :=> condition
SKELETON PROGRAMS
With the -S, --skeleton option, re2c ignores all non-re2c code and generates a
self-contained C program that can be further compiled and executed. The program consists
of lexer code and input data. For each constructed DFA (block or condition) re2c generates
a standalone lexer and two files: an .input file with strings derived from the DFA and a
.keys file with expected match results. The program runs each lexer on the corresponding
.input file and compares results with the expectations. Skeleton programs are very useful
for a number of reasons:
• They can check correctness of various re2c optimizations (the data is generated early in
the process, before any DFA transformations have taken place).
• Generating a set of input data with good coverage may be useful for both testing and
benchmarking.
• Generating self-contained executable programs allows one to get minimized test cases
(the original code may be large or have a lot of dependencies).
The difficulty with generating input data is that for all but the most trivial cases the
number of possible input strings is too large (even if the string length is limited). Re2c
solves this difficulty by generating sufficiently many strings to cover almost all DFA
transitions. It uses the following algorithm. First, it constructs a skeleton of the DFA.
For encodings with 1-byte code unit size (such as ASCII, UTF-8 and EBCDIC) skeleton is
just an exact copy of the original DFA. For encodings with multibyte code units skeleton
is a copy of DFA with certain transitions omitted: namely, re2c takes at most 256 code
units for each disjoint continuous range that corresponds to a DFA transition. The chosen
values are evenly distributed and include range bounds. Instead of trying to cover all
possible paths in the skeleton (which is infeasible) re2c generates sufficiently many
paths to cover all skeleton transitions, and thus trigger the corresponding conditional
jumps in the lexer. The algorithm implementation is limited by ~1Gb of transitions and
consumes constant amount of memory (re2c writes data to file as soon as it is generated).
VISUALIZATION AND DEBUG
With the -D, --emit-dot option, re2c does not generate C/C++ code. Instead, it dumps the
generated DFA in the DOT format. One can convert this dump to an image of the DFA using
graphviz or another library. Note that this option shows the final DFA after it has gone
through a number of optimizations and transformations. Earlier stages can be dumped with
various debug options, such as --dump-nfa, --dump-dfa-raw etc. (see the full list of
options).
SEE ALSO
You can find more information about re2c at the official website: http://re2c.org.
Similar programs are flex(1), lex(1), quex(http://quex.sourceforge.net).
AUTHORS
Re2c was originaly written by Peter Bumbulis in 1993. Since then it has been developed
and maintained by multiple volunteers; mots notably, Brain Young, Marcus Boerger, Dan
Nuffer and Ulya Trofimovich.
VERSION INFORMATION
This manpage describes re2c version 1.3.
RE2C(1)